diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe index 50e2a80..21640ea 100644 --- a/Documentation/ABI/testing/sysfs-bus-fcoe +++ b/Documentation/ABI/testing/sysfs-bus-fcoe @@ -1,14 +1,53 @@ -What: /sys/bus/fcoe/ctlr_X +What: /sys/bus/fcoe/ +Date: August 2012 +KernelVersion: TBD +Contact: Robert Love , devel@open-fcoe.org +Description: The FCoE bus. Attributes in this directory are control interfaces. +Attributes: + + ctlr_create: 'FCoE Controller' instance creation interface. Writing an + to this file will allocate and populate sysfs with a + fcoe_ctlr_device (ctlr_X). The user can then configure any + per-port settings and finally write to the fcoe_ctlr_device's + 'start' attribute to begin the kernel's discovery and login + process. + + ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a + fcoe_ctlr_device's sysfs name to this file will log the + fcoe_ctlr_device out of the fabric or otherwise connected + FCoE devices. It will also free all kernel memory allocated + for this fcoe_ctlr_device and any structures associated + with it, this includes the scsi_host. + +What: /sys/bus/fcoe/devices/ctlr_X Date: March 2012 KernelVersion: TBD Contact: Robert Love , devel@open-fcoe.org -Description: 'FCoE Controller' instances on the fcoe bus +Description: 'FCoE Controller' instances on the fcoe bus. + The FCoE Controller now has a three stage creation process. + 1) Write interface name to ctlr_create 2) Configure the FCoE + Controller (ctlr_X) 3) Enable the FCoE Controller to begin + discovery and login. The FCoE Controller is destroyed by + writing it's name, i.e. ctlr_X to the ctlr_delete file. + Attributes: fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing this value will change the dev_loss_tmo for all FCFs discovered by this controller. + mode: Display or change the FCoE Controller's mode. Possible + modes are 'Fabric' and 'VN2VN'. If a FCoE Controller + is started in 'Fabric' mode then FIP FCF discovery is + initiated and ultimately a fabric login is attempted. + If a FCoE Controller is started in 'VN2VN' mode then + FIP VN2VN discovery and login is performed. A FCoE + Controller only supports one mode at a time. + + enabled: Whether an FCoE controller is enabled or disabled. + 0 if disabled, 1 if enabled. Writing either 0 or 1 + to this file will enable or disable the FCoE controller. + lesb/link_fail: Link Error Status Block (LESB) link failure count. lesb/vlink_fail: Link Error Status Block (LESB) virtual link @@ -26,7 +65,7 @@ Attributes: Notes: ctlr_X (global increment starting at 0) -What: /sys/bus/fcoe/fcf_X +What: /sys/bus/fcoe/devices/fcf_X Date: March 2012 KernelVersion: TBD Contact: Robert Love , devel@open-fcoe.org diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index da03146..09673c7 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,12 @@ +Release Date : Sat. Feb 9, 2013 17:00:00 PST 2013 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford +Current Version : 06.506.00.00-rc1 +Old Version : 06.504.01.00-rc1 + 1. Add 4k FastPath DIF support. + 2. Dont load DevHandle unless FastPath enabled. + 3. Version and Changelog update. +------------------------------------------------------------------------------- Release Date : Mon. Oct 1, 2012 17:00:00 PST 2012 - (emaild-id:megaraidlinux@lsi.com) Adam Radford diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index 3b021ec..e2e3492 100644 --- a/drivers/scsi/aacraid/src.c +++ b/drivers/scsi/aacraid/src.c @@ -407,7 +407,7 @@ static int aac_src_deliver_message(struct fib *fib) fib->hw_fib_va->header.StructType = FIB_MAGIC2; fib->hw_fib_va->header.SenderFibAddress = (u32)address; fib->hw_fib_va->header.u.TimeStamp = 0; - BUG_ON((u32)(address >> 32) != 0L); + BUG_ON(upper_32_bits(address) != 0L); address |= fibsize; } else { /* Calculate the amount to the fibsize bits */ @@ -431,7 +431,7 @@ static int aac_src_deliver_message(struct fib *fib) address |= fibsize; } - src_writel(dev, MUnit.IQ_H, (address >> 32) & 0xffffffff); + src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff); src_writel(dev, MUnit.IQ_L, address & 0xffffffff); return 0; diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index 6401db4..2daf4b0 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -62,6 +62,10 @@ static int bnx2fc_destroy(struct net_device *net_device); static int bnx2fc_enable(struct net_device *netdev); static int bnx2fc_disable(struct net_device *netdev); +/* fcoe_syfs control interface handlers */ +static int bnx2fc_ctlr_alloc(struct net_device *netdev); +static int bnx2fc_ctlr_enabled(struct fcoe_ctlr_device *cdev); + static void bnx2fc_recv_frame(struct sk_buff *skb); static void bnx2fc_start_disc(struct bnx2fc_interface *interface); @@ -89,7 +93,6 @@ static void bnx2fc_port_shutdown(struct fc_lport *lport); static void bnx2fc_stop(struct bnx2fc_interface *interface); static int __init bnx2fc_mod_init(void); static void __exit bnx2fc_mod_exit(void); -static void bnx2fc_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev); unsigned int bnx2fc_debug_level; module_param_named(debug_logging, bnx2fc_debug_level, int, S_IRUGO|S_IWUSR); @@ -107,44 +110,6 @@ static inline struct net_device *bnx2fc_netdev(const struct fc_lport *lport) ((struct fcoe_port *)lport_priv(lport))->priv)->netdev; } -/** - * bnx2fc_get_lesb() - Fill the FCoE Link Error Status Block - * @lport: the local port - * @fc_lesb: the link error status block - */ -static void bnx2fc_get_lesb(struct fc_lport *lport, - struct fc_els_lesb *fc_lesb) -{ - struct net_device *netdev = bnx2fc_netdev(lport); - - __fcoe_get_lesb(lport, fc_lesb, netdev); -} - -static void bnx2fc_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev) -{ - struct fcoe_ctlr *fip = fcoe_ctlr_device_priv(ctlr_dev); - struct net_device *netdev = bnx2fc_netdev(fip->lp); - struct fcoe_fc_els_lesb *fcoe_lesb; - struct fc_els_lesb fc_lesb; - - __fcoe_get_lesb(fip->lp, &fc_lesb, netdev); - fcoe_lesb = (struct fcoe_fc_els_lesb *)(&fc_lesb); - - ctlr_dev->lesb.lesb_link_fail = - ntohl(fcoe_lesb->lesb_link_fail); - ctlr_dev->lesb.lesb_vlink_fail = - ntohl(fcoe_lesb->lesb_vlink_fail); - ctlr_dev->lesb.lesb_miss_fka = - ntohl(fcoe_lesb->lesb_miss_fka); - ctlr_dev->lesb.lesb_symb_err = - ntohl(fcoe_lesb->lesb_symb_err); - ctlr_dev->lesb.lesb_err_block = - ntohl(fcoe_lesb->lesb_err_block); - ctlr_dev->lesb.lesb_fcs_error = - ntohl(fcoe_lesb->lesb_fcs_error); -} -EXPORT_SYMBOL(bnx2fc_ctlr_get_lesb); - static void bnx2fc_fcf_get_vlan_id(struct fcoe_fcf_device *fcf_dev) { struct fcoe_ctlr_device *ctlr_dev = @@ -741,35 +706,6 @@ static int bnx2fc_shost_config(struct fc_lport *lport, struct device *dev) return 0; } -static void bnx2fc_link_speed_update(struct fc_lport *lport) -{ - struct fcoe_port *port = lport_priv(lport); - struct bnx2fc_interface *interface = port->priv; - struct net_device *netdev = interface->netdev; - struct ethtool_cmd ecmd; - - if (!__ethtool_get_settings(netdev, &ecmd)) { - lport->link_supported_speeds &= - ~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT); - if (ecmd.supported & (SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full)) - lport->link_supported_speeds |= FC_PORTSPEED_1GBIT; - if (ecmd.supported & SUPPORTED_10000baseT_Full) - lport->link_supported_speeds |= FC_PORTSPEED_10GBIT; - - switch (ethtool_cmd_speed(&ecmd)) { - case SPEED_1000: - lport->link_speed = FC_PORTSPEED_1GBIT; - break; - case SPEED_2500: - lport->link_speed = FC_PORTSPEED_2GBIT; - break; - case SPEED_10000: - lport->link_speed = FC_PORTSPEED_10GBIT; - break; - } - } -} static int bnx2fc_link_ok(struct fc_lport *lport) { struct fcoe_port *port = lport_priv(lport); @@ -827,7 +763,7 @@ static int bnx2fc_net_config(struct fc_lport *lport, struct net_device *netdev) port->fcoe_pending_queue_active = 0; setup_timer(&port->timer, fcoe_queue_timer, (unsigned long) lport); - bnx2fc_link_speed_update(lport); + fcoe_link_speed_update(lport); if (!lport->vport) { if (fcoe_get_wwn(netdev, &wwnn, NETDEV_FCOE_WWNN)) @@ -871,6 +807,7 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event, u16 vlan_id) { struct bnx2fc_hba *hba = (struct bnx2fc_hba *)context; + struct fcoe_ctlr_device *cdev; struct fc_lport *lport; struct fc_lport *vport; struct bnx2fc_interface *interface, *tmp; @@ -930,30 +867,47 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event, BNX2FC_HBA_DBG(lport, "netevent handler - event=%s %ld\n", interface->netdev->name, event); - bnx2fc_link_speed_update(lport); + fcoe_link_speed_update(lport); + + cdev = fcoe_ctlr_to_ctlr_dev(ctlr); if (link_possible && !bnx2fc_link_ok(lport)) { - /* Reset max recv frame size to default */ - fc_set_mfs(lport, BNX2FC_MFS); - /* - * ctlr link up will only be handled during - * enable to avoid sending discovery solicitation - * on a stale vlan - */ - if (interface->enabled) - fcoe_ctlr_link_up(ctlr); + switch (cdev->enabled) { + case FCOE_CTLR_DISABLED: + pr_info("Link up while interface is disabled.\n"); + break; + case FCOE_CTLR_ENABLED: + case FCOE_CTLR_UNUSED: + /* Reset max recv frame size to default */ + fc_set_mfs(lport, BNX2FC_MFS); + /* + * ctlr link up will only be handled during + * enable to avoid sending discovery + * solicitation on a stale vlan + */ + if (interface->enabled) + fcoe_ctlr_link_up(ctlr); + }; } else if (fcoe_ctlr_link_down(ctlr)) { - mutex_lock(&lport->lp_mutex); - list_for_each_entry(vport, &lport->vports, list) - fc_host_port_type(vport->host) = - FC_PORTTYPE_UNKNOWN; - mutex_unlock(&lport->lp_mutex); - fc_host_port_type(lport->host) = FC_PORTTYPE_UNKNOWN; - per_cpu_ptr(lport->stats, - get_cpu())->LinkFailureCount++; - put_cpu(); - fcoe_clean_pending_queue(lport); - wait_for_upload = 1; + switch (cdev->enabled) { + case FCOE_CTLR_DISABLED: + pr_info("Link down while interface is disabled.\n"); + break; + case FCOE_CTLR_ENABLED: + case FCOE_CTLR_UNUSED: + mutex_lock(&lport->lp_mutex); + list_for_each_entry(vport, &lport->vports, list) + fc_host_port_type(vport->host) = + FC_PORTTYPE_UNKNOWN; + mutex_unlock(&lport->lp_mutex); + fc_host_port_type(lport->host) = + FC_PORTTYPE_UNKNOWN; + per_cpu_ptr(lport->stats, + get_cpu())->LinkFailureCount++; + put_cpu(); + fcoe_clean_pending_queue(lport); + wait_for_upload = 1; + }; } } mutex_unlock(&bnx2fc_dev_lock); @@ -1484,6 +1438,7 @@ static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface, port = lport_priv(lport); port->lport = lport; port->priv = interface; + port->get_netdev = bnx2fc_netdev; INIT_WORK(&port->destroy_work, bnx2fc_destroy_work); /* Configure fcoe_port */ @@ -2003,7 +1958,9 @@ static void bnx2fc_ulp_init(struct cnic_dev *dev) set_bit(BNX2FC_CNIC_REGISTERED, &hba->reg_with_cnic); } - +/** + * Deperecated: Use bnx2fc_enabled() + */ static int bnx2fc_disable(struct net_device *netdev) { struct bnx2fc_interface *interface; @@ -2029,7 +1986,9 @@ static int bnx2fc_disable(struct net_device *netdev) return rc; } - +/** + * Deprecated: Use bnx2fc_enabled() + */ static int bnx2fc_enable(struct net_device *netdev) { struct bnx2fc_interface *interface; @@ -2055,17 +2014,57 @@ static int bnx2fc_enable(struct net_device *netdev) } /** - * bnx2fc_create - Create bnx2fc FCoE interface + * bnx2fc_ctlr_enabled() - Enable or disable an FCoE Controller + * @cdev: The FCoE Controller that is being enabled or disabled + * + * fcoe_sysfs will ensure that the state of 'enabled' has + * changed, so no checking is necessary here. This routine simply + * calls fcoe_enable or fcoe_disable, both of which are deprecated. + * When those routines are removed the functionality can be merged + * here. + */ +static int bnx2fc_ctlr_enabled(struct fcoe_ctlr_device *cdev) +{ + struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(cdev); + struct fc_lport *lport = ctlr->lp; + struct net_device *netdev = bnx2fc_netdev(lport); + + switch (cdev->enabled) { + case FCOE_CTLR_ENABLED: + return bnx2fc_enable(netdev); + case FCOE_CTLR_DISABLED: + return bnx2fc_disable(netdev); + case FCOE_CTLR_UNUSED: + default: + return -ENOTSUPP; + }; +} + +enum bnx2fc_create_link_state { + BNX2FC_CREATE_LINK_DOWN, + BNX2FC_CREATE_LINK_UP, +}; + +/** + * _bnx2fc_create() - Create bnx2fc FCoE interface + * @netdev : The net_device object the Ethernet interface to create on + * @fip_mode: The FIP mode for this creation + * @link_state: The ctlr link state on creation * - * @buffer: The name of Ethernet interface to create on - * @kp: The associated kernel param + * Called from either the libfcoe 'create' module parameter + * via fcoe_create or from fcoe_syfs's ctlr_create file. * - * Called from sysfs. + * libfcoe's 'create' module parameter is deprecated so some + * consolidation of code can be done when that interface is + * removed. * * Returns: 0 for success */ -static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode) +static int _bnx2fc_create(struct net_device *netdev, + enum fip_state fip_mode, + enum bnx2fc_create_link_state link_state) { + struct fcoe_ctlr_device *cdev; struct fcoe_ctlr *ctlr; struct bnx2fc_interface *interface; struct bnx2fc_hba *hba; @@ -2160,7 +2159,15 @@ static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode) /* Make this master N_port */ ctlr->lp = lport; - if (!bnx2fc_link_ok(lport)) { + cdev = fcoe_ctlr_to_ctlr_dev(ctlr); + + if (link_state == BNX2FC_CREATE_LINK_UP) + cdev->enabled = FCOE_CTLR_ENABLED; + else + cdev->enabled = FCOE_CTLR_DISABLED; + + if (link_state == BNX2FC_CREATE_LINK_UP && + !bnx2fc_link_ok(lport)) { fcoe_ctlr_link_up(ctlr); fc_host_port_type(lport->host) = FC_PORTTYPE_NPORT; set_bit(ADAPTER_STATE_READY, &interface->hba->adapter_state); @@ -2168,7 +2175,10 @@ static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode) BNX2FC_HBA_DBG(lport, "create: START DISC\n"); bnx2fc_start_disc(interface); - interface->enabled = true; + + if (link_state == BNX2FC_CREATE_LINK_UP) + interface->enabled = true; + /* * Release from kref_init in bnx2fc_interface_setup, on success * lport should be holding a reference taken in bnx2fc_if_create @@ -2194,6 +2204,37 @@ mod_err: } /** + * bnx2fc_create() - Create a bnx2fc interface + * @netdev : The net_device object the Ethernet interface to create on + * @fip_mode: The FIP mode for this creation + * + * Called from fcoe transport + * + * Returns: 0 for success + */ +static int bnx2fc_create(struct net_device *netdev, enum fip_state fip_mode) +{ + return _bnx2fc_create(netdev, fip_mode, BNX2FC_CREATE_LINK_UP); +} + +/** + * bnx2fc_ctlr_alloc() - Allocate a bnx2fc interface from fcoe_sysfs + * @netdev: The net_device to be used by the allocated FCoE Controller + * + * This routine is called from fcoe_sysfs. It will start the fcoe_ctlr + * in a link_down state. The allows the user an opportunity to configure + * the FCoE Controller from sysfs before enabling the FCoE Controller. + * + * Creating in with this routine starts the FCoE Controller in Fabric + * mode. The user can change to VN2VN or another mode before enabling. + */ +static int bnx2fc_ctlr_alloc(struct net_device *netdev) +{ + return _bnx2fc_create(netdev, FIP_MODE_FABRIC, + BNX2FC_CREATE_LINK_DOWN); +} + +/** * bnx2fc_find_hba_for_cnic - maps cnic instance to bnx2fc hba instance * * @cnic: Pointer to cnic device instance @@ -2318,6 +2359,7 @@ static struct fcoe_transport bnx2fc_transport = { .name = {"bnx2fc"}, .attached = false, .list = LIST_HEAD_INIT(bnx2fc_transport.list), + .alloc = bnx2fc_ctlr_alloc, .match = bnx2fc_match, .create = bnx2fc_create, .destroy = bnx2fc_destroy, @@ -2562,13 +2604,13 @@ module_init(bnx2fc_mod_init); module_exit(bnx2fc_mod_exit); static struct fcoe_sysfs_function_template bnx2fc_fcoe_sysfs_templ = { - .get_fcoe_ctlr_mode = fcoe_ctlr_get_fip_mode, - .get_fcoe_ctlr_link_fail = bnx2fc_ctlr_get_lesb, - .get_fcoe_ctlr_vlink_fail = bnx2fc_ctlr_get_lesb, - .get_fcoe_ctlr_miss_fka = bnx2fc_ctlr_get_lesb, - .get_fcoe_ctlr_symb_err = bnx2fc_ctlr_get_lesb, - .get_fcoe_ctlr_err_block = bnx2fc_ctlr_get_lesb, - .get_fcoe_ctlr_fcs_error = bnx2fc_ctlr_get_lesb, + .set_fcoe_ctlr_enabled = bnx2fc_ctlr_enabled, + .get_fcoe_ctlr_link_fail = fcoe_ctlr_get_lesb, + .get_fcoe_ctlr_vlink_fail = fcoe_ctlr_get_lesb, + .get_fcoe_ctlr_miss_fka = fcoe_ctlr_get_lesb, + .get_fcoe_ctlr_symb_err = fcoe_ctlr_get_lesb, + .get_fcoe_ctlr_err_block = fcoe_ctlr_get_lesb, + .get_fcoe_ctlr_fcs_error = fcoe_ctlr_get_lesb, .get_fcoe_fcf_selected = fcoe_fcf_get_selected, .get_fcoe_fcf_vlan_id = bnx2fc_fcf_get_vlan_id, @@ -2675,7 +2717,7 @@ static struct libfc_function_template bnx2fc_libfc_fcn_templ = { .elsct_send = bnx2fc_elsct_send, .fcp_abort_io = bnx2fc_abort_io, .fcp_cleanup = bnx2fc_cleanup, - .get_lesb = bnx2fc_get_lesb, + .get_lesb = fcoe_get_lesb, .rport_event_callback = bnx2fc_rport_event_handler, }; diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index 865c64f..fed486bf 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -3747,13 +3747,13 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb, dcb->max_command = 1; dcb->target_id = target; dcb->target_lun = lun; + dcb->dev_mode = eeprom->target[target].cfg0; #ifndef DC395x_NO_DISCONNECT dcb->identify_msg = IDENTIFY(dcb->dev_mode & NTC_DO_DISCONNECT, lun); #else dcb->identify_msg = IDENTIFY(0, lun); #endif - dcb->dev_mode = eeprom->target[target].cfg0; dcb->inquiry7 = 0; dcb->sync_mode = 0; dcb->min_nego_period = clock_period[period_index]; diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 666b7ac..b5d92fc 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -82,11 +82,11 @@ static int fcoe_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *); static int fcoe_percpu_receive_thread(void *); static void fcoe_percpu_clean(struct fc_lport *); -static int fcoe_link_speed_update(struct fc_lport *); static int fcoe_link_ok(struct fc_lport *); static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *); static int fcoe_hostlist_add(const struct fc_lport *); +static void fcoe_hostlist_del(const struct fc_lport *); static int fcoe_device_notification(struct notifier_block *, ulong, void *); static void fcoe_dev_setup(void); @@ -117,6 +117,11 @@ static int fcoe_destroy(struct net_device *netdev); static int fcoe_enable(struct net_device *netdev); static int fcoe_disable(struct net_device *netdev); +/* fcoe_syfs control interface handlers */ +static int fcoe_ctlr_alloc(struct net_device *netdev); +static int fcoe_ctlr_enabled(struct fcoe_ctlr_device *cdev); + + static struct fc_seq *fcoe_elsct_send(struct fc_lport *, u32 did, struct fc_frame *, unsigned int op, @@ -126,8 +131,6 @@ static struct fc_seq *fcoe_elsct_send(struct fc_lport *, void *, u32 timeout); static void fcoe_recv_frame(struct sk_buff *skb); -static void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *); - /* notification function for packets from net device */ static struct notifier_block fcoe_notifier = { .notifier_call = fcoe_device_notification, @@ -151,11 +154,11 @@ static int fcoe_vport_create(struct fc_vport *, bool disabled); static int fcoe_vport_disable(struct fc_vport *, bool disable); static void fcoe_set_vport_symbolic_name(struct fc_vport *); static void fcoe_set_port_id(struct fc_lport *, u32, struct fc_frame *); -static void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *); static void fcoe_fcf_get_vlan_id(struct fcoe_fcf_device *); static struct fcoe_sysfs_function_template fcoe_sysfs_templ = { - .get_fcoe_ctlr_mode = fcoe_ctlr_get_fip_mode, + .set_fcoe_ctlr_mode = fcoe_ctlr_set_fip_mode, + .set_fcoe_ctlr_enabled = fcoe_ctlr_enabled, .get_fcoe_ctlr_link_fail = fcoe_ctlr_get_lesb, .get_fcoe_ctlr_vlink_fail = fcoe_ctlr_get_lesb, .get_fcoe_ctlr_miss_fka = fcoe_ctlr_get_lesb, @@ -1112,10 +1115,17 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe, port = lport_priv(lport); port->lport = lport; port->priv = fcoe; + port->get_netdev = fcoe_netdev; port->max_queue_depth = FCOE_MAX_QUEUE_DEPTH; port->min_queue_depth = FCOE_MIN_QUEUE_DEPTH; INIT_WORK(&port->destroy_work, fcoe_destroy_work); + /* + * Need to add the lport to the hostlist + * so we catch NETDEV_CHANGE events. + */ + fcoe_hostlist_add(lport); + /* configure a fc_lport including the exchange manager */ rc = fcoe_lport_config(lport); if (rc) { @@ -1187,6 +1197,7 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe, out_lp_destroy: fc_exch_mgr_free(lport); out_host_put: + fcoe_hostlist_del(lport); scsi_host_put(lport->host); out: return ERR_PTR(rc); @@ -1964,6 +1975,7 @@ static int fcoe_dcb_app_notification(struct notifier_block *notifier, static int fcoe_device_notification(struct notifier_block *notifier, ulong event, void *ptr) { + struct fcoe_ctlr_device *cdev; struct fc_lport *lport = NULL; struct net_device *netdev = ptr; struct fcoe_ctlr *ctlr; @@ -2020,13 +2032,29 @@ static int fcoe_device_notification(struct notifier_block *notifier, fcoe_link_speed_update(lport); - if (link_possible && !fcoe_link_ok(lport)) - fcoe_ctlr_link_up(ctlr); - else if (fcoe_ctlr_link_down(ctlr)) { - stats = per_cpu_ptr(lport->stats, get_cpu()); - stats->LinkFailureCount++; - put_cpu(); - fcoe_clean_pending_queue(lport); + cdev = fcoe_ctlr_to_ctlr_dev(ctlr); + + if (link_possible && !fcoe_link_ok(lport)) { + switch (cdev->enabled) { + case FCOE_CTLR_DISABLED: + pr_info("Link up while interface is disabled.\n"); + break; + case FCOE_CTLR_ENABLED: + case FCOE_CTLR_UNUSED: + fcoe_ctlr_link_up(ctlr); + }; + } else if (fcoe_ctlr_link_down(ctlr)) { + switch (cdev->enabled) { + case FCOE_CTLR_DISABLED: + pr_info("Link down while interface is disabled.\n"); + break; + case FCOE_CTLR_ENABLED: + case FCOE_CTLR_UNUSED: + stats = per_cpu_ptr(lport->stats, get_cpu()); + stats->LinkFailureCount++; + put_cpu(); + fcoe_clean_pending_queue(lport); + }; } out: return rc; @@ -2039,6 +2067,8 @@ out: * Called from fcoe transport. * * Returns: 0 for success + * + * Deprecated: use fcoe_ctlr_enabled() */ static int fcoe_disable(struct net_device *netdev) { @@ -2098,6 +2128,33 @@ out: } /** + * fcoe_ctlr_enabled() - Enable or disable an FCoE Controller + * @cdev: The FCoE Controller that is being enabled or disabled + * + * fcoe_sysfs will ensure that the state of 'enabled' has + * changed, so no checking is necessary here. This routine simply + * calls fcoe_enable or fcoe_disable, both of which are deprecated. + * When those routines are removed the functionality can be merged + * here. + */ +static int fcoe_ctlr_enabled(struct fcoe_ctlr_device *cdev) +{ + struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(cdev); + struct fc_lport *lport = ctlr->lp; + struct net_device *netdev = fcoe_netdev(lport); + + switch (cdev->enabled) { + case FCOE_CTLR_ENABLED: + return fcoe_enable(netdev); + case FCOE_CTLR_DISABLED: + return fcoe_disable(netdev); + case FCOE_CTLR_UNUSED: + default: + return -ENOTSUPP; + }; +} + +/** * fcoe_destroy() - Destroy a FCoE interface * @netdev : The net_device object the Ethernet interface to create on * @@ -2139,8 +2196,31 @@ static void fcoe_destroy_work(struct work_struct *work) { struct fcoe_port *port; struct fcoe_interface *fcoe; + struct Scsi_Host *shost; + struct fc_host_attrs *fc_host; + unsigned long flags; + struct fc_vport *vport; + struct fc_vport *next_vport; port = container_of(work, struct fcoe_port, destroy_work); + shost = port->lport->host; + fc_host = shost_to_fc_host(shost); + + /* Loop through all the vports and mark them for deletion */ + spin_lock_irqsave(shost->host_lock, flags); + list_for_each_entry_safe(vport, next_vport, &fc_host->vports, peers) { + if (vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING)) { + continue; + } else { + vport->flags |= FC_VPORT_DELETING; + queue_work(fc_host_work_q(shost), + &vport->vport_delete_work); + } + } + spin_unlock_irqrestore(shost->host_lock, flags); + + flush_workqueue(fc_host_work_q(shost)); + mutex_lock(&fcoe_config_mutex); fcoe = port->priv; @@ -2204,16 +2284,26 @@ static void fcoe_dcb_create(struct fcoe_interface *fcoe) #endif } +enum fcoe_create_link_state { + FCOE_CREATE_LINK_DOWN, + FCOE_CREATE_LINK_UP, +}; + /** - * fcoe_create() - Create a fcoe interface - * @netdev : The net_device object the Ethernet interface to create on - * @fip_mode: The FIP mode for this creation + * _fcoe_create() - (internal) Create a fcoe interface + * @netdev : The net_device object the Ethernet interface to create on + * @fip_mode: The FIP mode for this creation + * @link_state: The ctlr link state on creation * - * Called from fcoe transport + * Called from either the libfcoe 'create' module parameter + * via fcoe_create or from fcoe_syfs's ctlr_create file. * - * Returns: 0 for success + * libfcoe's 'create' module parameter is deprecated so some + * consolidation of code can be done when that interface is + * removed. */ -static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) +static int _fcoe_create(struct net_device *netdev, enum fip_state fip_mode, + enum fcoe_create_link_state link_state) { int rc = 0; struct fcoe_ctlr_device *ctlr_dev; @@ -2254,13 +2344,29 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) /* setup DCB priority attributes. */ fcoe_dcb_create(fcoe); - /* add to lports list */ - fcoe_hostlist_add(lport); - /* start FIP Discovery and FLOGI */ lport->boot_time = jiffies; fc_fabric_login(lport); - if (!fcoe_link_ok(lport)) { + + /* + * If the fcoe_ctlr_device is to be set to DISABLED + * it must be done after the lport is added to the + * hostlist, but before the rtnl_lock is released. + * This is because the rtnl_lock protects the + * hostlist that fcoe_device_notification uses. If + * the FCoE Controller is intended to be created + * DISABLED then 'enabled' needs to be considered + * handling link events. 'enabled' must be set + * before the lport can be found in the hostlist + * when a link up event is received. + */ + if (link_state == FCOE_CREATE_LINK_UP) + ctlr_dev->enabled = FCOE_CTLR_ENABLED; + else + ctlr_dev->enabled = FCOE_CTLR_DISABLED; + + if (link_state == FCOE_CREATE_LINK_UP && + !fcoe_link_ok(lport)) { rtnl_unlock(); fcoe_ctlr_link_up(ctlr); mutex_unlock(&fcoe_config_mutex); @@ -2275,37 +2381,34 @@ out_nortnl: } /** - * fcoe_link_speed_update() - Update the supported and actual link speeds - * @lport: The local port to update speeds for + * fcoe_create() - Create a fcoe interface + * @netdev : The net_device object the Ethernet interface to create on + * @fip_mode: The FIP mode for this creation + * + * Called from fcoe transport + * + * Returns: 0 for success + */ +static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) +{ + return _fcoe_create(netdev, fip_mode, FCOE_CREATE_LINK_UP); +} + +/** + * fcoe_ctlr_alloc() - Allocate a fcoe interface from fcoe_sysfs + * @netdev: The net_device to be used by the allocated FCoE Controller * - * Returns: 0 if the ethtool query was successful - * -1 if the ethtool query failed + * This routine is called from fcoe_sysfs. It will start the fcoe_ctlr + * in a link_down state. The allows the user an opportunity to configure + * the FCoE Controller from sysfs before enabling the FCoE Controller. + * + * Creating in with this routine starts the FCoE Controller in Fabric + * mode. The user can change to VN2VN or another mode before enabling. */ -static int fcoe_link_speed_update(struct fc_lport *lport) +static int fcoe_ctlr_alloc(struct net_device *netdev) { - struct net_device *netdev = fcoe_netdev(lport); - struct ethtool_cmd ecmd; - - if (!__ethtool_get_settings(netdev, &ecmd)) { - lport->link_supported_speeds &= - ~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT); - if (ecmd.supported & (SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full)) - lport->link_supported_speeds |= FC_PORTSPEED_1GBIT; - if (ecmd.supported & SUPPORTED_10000baseT_Full) - lport->link_supported_speeds |= - FC_PORTSPEED_10GBIT; - switch (ethtool_cmd_speed(&ecmd)) { - case SPEED_1000: - lport->link_speed = FC_PORTSPEED_1GBIT; - break; - case SPEED_10000: - lport->link_speed = FC_PORTSPEED_10GBIT; - break; - } - return 0; - } - return -1; + return _fcoe_create(netdev, FIP_MODE_FABRIC, + FCOE_CREATE_LINK_DOWN); } /** @@ -2375,10 +2478,13 @@ static int fcoe_reset(struct Scsi_Host *shost) struct fcoe_port *port = lport_priv(lport); struct fcoe_interface *fcoe = port->priv; struct fcoe_ctlr *ctlr = fcoe_to_ctlr(fcoe); + struct fcoe_ctlr_device *cdev = fcoe_ctlr_to_ctlr_dev(ctlr); fcoe_ctlr_link_down(ctlr); fcoe_clean_pending_queue(ctlr->lp); - if (!fcoe_link_ok(ctlr->lp)) + + if (cdev->enabled != FCOE_CTLR_DISABLED && + !fcoe_link_ok(ctlr->lp)) fcoe_ctlr_link_up(ctlr); return 0; } @@ -2445,12 +2551,31 @@ static int fcoe_hostlist_add(const struct fc_lport *lport) return 0; } +/** + * fcoe_hostlist_del() - Remove the FCoE interface identified by a local + * port to the hostlist + * @lport: The local port that identifies the FCoE interface to be added + * + * Locking: must be called with the RTNL mutex held + * + */ +static void fcoe_hostlist_del(const struct fc_lport *lport) +{ + struct fcoe_interface *fcoe; + struct fcoe_port *port; + + port = lport_priv(lport); + fcoe = port->priv; + list_del(&fcoe->list); + return; +} static struct fcoe_transport fcoe_sw_transport = { .name = {FCOE_TRANSPORT_DEFAULT}, .attached = false, .list = LIST_HEAD_INIT(fcoe_sw_transport.list), .match = fcoe_match, + .alloc = fcoe_ctlr_alloc, .create = fcoe_create, .destroy = fcoe_destroy, .enable = fcoe_enable, @@ -2534,9 +2659,9 @@ static void __exit fcoe_exit(void) /* releases the associated fcoe hosts */ rtnl_lock(); list_for_each_entry_safe(fcoe, tmp, &fcoe_hostlist, list) { - list_del(&fcoe->list); ctlr = fcoe_to_ctlr(fcoe); port = lport_priv(ctlr->lp); + fcoe_hostlist_del(port->lport); queue_work(fcoe_wq, &port->destroy_work); } rtnl_unlock(); @@ -2776,43 +2901,6 @@ static void fcoe_set_vport_symbolic_name(struct fc_vport *vport) NULL, NULL, 3 * lport->r_a_tov); } -/** - * fcoe_get_lesb() - Fill the FCoE Link Error Status Block - * @lport: the local port - * @fc_lesb: the link error status block - */ -static void fcoe_get_lesb(struct fc_lport *lport, - struct fc_els_lesb *fc_lesb) -{ - struct net_device *netdev = fcoe_netdev(lport); - - __fcoe_get_lesb(lport, fc_lesb, netdev); -} - -static void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev) -{ - struct fcoe_ctlr *fip = fcoe_ctlr_device_priv(ctlr_dev); - struct net_device *netdev = fcoe_netdev(fip->lp); - struct fcoe_fc_els_lesb *fcoe_lesb; - struct fc_els_lesb fc_lesb; - - __fcoe_get_lesb(fip->lp, &fc_lesb, netdev); - fcoe_lesb = (struct fcoe_fc_els_lesb *)(&fc_lesb); - - ctlr_dev->lesb.lesb_link_fail = - ntohl(fcoe_lesb->lesb_link_fail); - ctlr_dev->lesb.lesb_vlink_fail = - ntohl(fcoe_lesb->lesb_vlink_fail); - ctlr_dev->lesb.lesb_miss_fka = - ntohl(fcoe_lesb->lesb_miss_fka); - ctlr_dev->lesb.lesb_symb_err = - ntohl(fcoe_lesb->lesb_symb_err); - ctlr_dev->lesb.lesb_err_block = - ntohl(fcoe_lesb->lesb_err_block); - ctlr_dev->lesb.lesb_fcs_error = - ntohl(fcoe_lesb->lesb_fcs_error); -} - static void fcoe_fcf_get_vlan_id(struct fcoe_fcf_device *fcf_dev) { struct fcoe_ctlr_device *ctlr_dev = diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h index b42dc32..2b53672 100644 --- a/drivers/scsi/fcoe/fcoe.h +++ b/drivers/scsi/fcoe/fcoe.h @@ -55,12 +55,12 @@ do { \ #define FCOE_DBG(fmt, args...) \ FCOE_CHECK_LOGGING(FCOE_LOGGING, \ - printk(KERN_INFO "fcoe: " fmt, ##args);) + pr_info("fcoe: " fmt, ##args);) #define FCOE_NETDEV_DBG(netdev, fmt, args...) \ FCOE_CHECK_LOGGING(FCOE_NETDEV_LOGGING, \ - printk(KERN_INFO "fcoe: %s: " fmt, \ - netdev->name, ##args);) + pr_info("fcoe: %s: " fmt, \ + netdev->name, ##args);) /** * struct fcoe_interface - A FCoE interface diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index 4a909d7..08c3bc3 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -1291,8 +1291,16 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, LIBFCOE_FIP_DBG(fip, "Clear Virtual Link received\n"); - if (!fcf || !lport->port_id) + if (!fcf || !lport->port_id) { + /* + * We are yet to select best FCF, but we got CVL in the + * meantime. reset the ctlr and let it rediscover the FCF + */ + mutex_lock(&fip->ctlr_mutex); + fcoe_ctlr_reset(fip); + mutex_unlock(&fip->ctlr_mutex); return; + } /* * mask of required descriptors. Validating each one clears its bit. @@ -1551,15 +1559,6 @@ static struct fcoe_fcf *fcoe_ctlr_select(struct fcoe_ctlr *fip) fcf->fabric_name, fcf->vfid, fcf->fcf_mac, fcf->fc_map, fcoe_ctlr_mtu_valid(fcf), fcf->flogi_sent, fcf->pri); - if (fcf->fabric_name != first->fabric_name || - fcf->vfid != first->vfid || - fcf->fc_map != first->fc_map) { - LIBFCOE_FIP_DBG(fip, "Conflicting fabric, VFID, " - "or FC-MAP\n"); - return NULL; - } - if (fcf->flogi_sent) - continue; if (!fcoe_ctlr_fcf_usable(fcf)) { LIBFCOE_FIP_DBG(fip, "FCF for fab %16.16llx " "map %x %svalid %savailable\n", @@ -1569,6 +1568,15 @@ static struct fcoe_fcf *fcoe_ctlr_select(struct fcoe_ctlr *fip) "" : "un"); continue; } + if (fcf->fabric_name != first->fabric_name || + fcf->vfid != first->vfid || + fcf->fc_map != first->fc_map) { + LIBFCOE_FIP_DBG(fip, "Conflicting fabric, VFID, " + "or FC-MAP\n"); + return NULL; + } + if (fcf->flogi_sent) + continue; if (!best || fcf->pri < best->pri || best->flogi_sent) best = fcf; } @@ -2864,22 +2872,21 @@ void fcoe_fcf_get_selected(struct fcoe_fcf_device *fcf_dev) } EXPORT_SYMBOL(fcoe_fcf_get_selected); -void fcoe_ctlr_get_fip_mode(struct fcoe_ctlr_device *ctlr_dev) +void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev) { struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(ctlr_dev); mutex_lock(&ctlr->ctlr_mutex); - switch (ctlr->mode) { - case FIP_MODE_FABRIC: - ctlr_dev->mode = FIP_CONN_TYPE_FABRIC; - break; - case FIP_MODE_VN2VN: - ctlr_dev->mode = FIP_CONN_TYPE_VN2VN; + switch (ctlr_dev->mode) { + case FIP_CONN_TYPE_VN2VN: + ctlr->mode = FIP_MODE_VN2VN; break; + case FIP_CONN_TYPE_FABRIC: default: - ctlr_dev->mode = FIP_CONN_TYPE_UNKNOWN; + ctlr->mode = FIP_MODE_FABRIC; break; } + mutex_unlock(&ctlr->ctlr_mutex); } -EXPORT_SYMBOL(fcoe_ctlr_get_fip_mode); +EXPORT_SYMBOL(fcoe_ctlr_set_fip_mode); diff --git a/drivers/scsi/fcoe/fcoe_sysfs.c b/drivers/scsi/fcoe/fcoe_sysfs.c index 5e75168..8c05ae01 100644 --- a/drivers/scsi/fcoe/fcoe_sysfs.c +++ b/drivers/scsi/fcoe/fcoe_sysfs.c @@ -21,8 +21,17 @@ #include #include #include +#include #include +#include + +/* + * OK to include local libfcoe.h for debug_logging, but cannot include + * otherwise non-netdev based fcoe solutions would have + * have to include more than fcoe_sysfs.h. + */ +#include "libfcoe.h" static atomic_t ctlr_num; static atomic_t fcf_num; @@ -71,6 +80,8 @@ MODULE_PARM_DESC(fcf_dev_loss_tmo, ((x)->lesb.lesb_err_block) #define fcoe_ctlr_fcs_error(x) \ ((x)->lesb.lesb_fcs_error) +#define fcoe_ctlr_enabled(x) \ + ((x)->enabled) #define fcoe_fcf_state(x) \ ((x)->state) #define fcoe_fcf_fabric_name(x) \ @@ -210,25 +221,34 @@ static ssize_t show_fcoe_fcf_device_##field(struct device *dev, \ #define fcoe_enum_name_search(title, table_type, table) \ static const char *get_fcoe_##title##_name(enum table_type table_key) \ { \ - int i; \ - char *name = NULL; \ - \ - for (i = 0; i < ARRAY_SIZE(table); i++) { \ - if (table[i].value == table_key) { \ - name = table[i].name; \ - break; \ - } \ - } \ - return name; \ + if (table_key < 0 || table_key >= ARRAY_SIZE(table)) \ + return NULL; \ + return table[table_key]; \ +} + +static char *fip_conn_type_names[] = { + [ FIP_CONN_TYPE_UNKNOWN ] = "Unknown", + [ FIP_CONN_TYPE_FABRIC ] = "Fabric", + [ FIP_CONN_TYPE_VN2VN ] = "VN2VN", +}; +fcoe_enum_name_search(ctlr_mode, fip_conn_type, fip_conn_type_names) + +static enum fip_conn_type fcoe_parse_mode(const char *buf) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(fip_conn_type_names); i++) { + if (strcasecmp(buf, fip_conn_type_names[i]) == 0) + return i; + } + + return FIP_CONN_TYPE_UNKNOWN; } -static struct { - enum fcf_state value; - char *name; -} fcf_state_names[] = { - { FCOE_FCF_STATE_UNKNOWN, "Unknown" }, - { FCOE_FCF_STATE_DISCONNECTED, "Disconnected" }, - { FCOE_FCF_STATE_CONNECTED, "Connected" }, +static char *fcf_state_names[] = { + [ FCOE_FCF_STATE_UNKNOWN ] = "Unknown", + [ FCOE_FCF_STATE_DISCONNECTED ] = "Disconnected", + [ FCOE_FCF_STATE_CONNECTED ] = "Connected", }; fcoe_enum_name_search(fcf_state, fcf_state, fcf_state_names) #define FCOE_FCF_STATE_MAX_NAMELEN 50 @@ -246,17 +266,7 @@ static ssize_t show_fcf_state(struct device *dev, } static FCOE_DEVICE_ATTR(fcf, state, S_IRUGO, show_fcf_state, NULL); -static struct { - enum fip_conn_type value; - char *name; -} fip_conn_type_names[] = { - { FIP_CONN_TYPE_UNKNOWN, "Unknown" }, - { FIP_CONN_TYPE_FABRIC, "Fabric" }, - { FIP_CONN_TYPE_VN2VN, "VN2VN" }, -}; -fcoe_enum_name_search(ctlr_mode, fip_conn_type, fip_conn_type_names) -#define FCOE_CTLR_MODE_MAX_NAMELEN 50 - +#define FCOE_MAX_MODENAME_LEN 20 static ssize_t show_ctlr_mode(struct device *dev, struct device_attribute *attr, char *buf) @@ -264,17 +274,116 @@ static ssize_t show_ctlr_mode(struct device *dev, struct fcoe_ctlr_device *ctlr = dev_to_ctlr(dev); const char *name; - if (ctlr->f->get_fcoe_ctlr_mode) - ctlr->f->get_fcoe_ctlr_mode(ctlr); - name = get_fcoe_ctlr_mode_name(ctlr->mode); if (!name) return -EINVAL; - return snprintf(buf, FCOE_CTLR_MODE_MAX_NAMELEN, + return snprintf(buf, FCOE_MAX_MODENAME_LEN, + "%s\n", name); +} + +static ssize_t store_ctlr_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fcoe_ctlr_device *ctlr = dev_to_ctlr(dev); + char mode[FCOE_MAX_MODENAME_LEN + 1]; + + if (count > FCOE_MAX_MODENAME_LEN) + return -EINVAL; + + strncpy(mode, buf, count); + + if (mode[count - 1] == '\n') + mode[count - 1] = '\0'; + else + mode[count] = '\0'; + + switch (ctlr->enabled) { + case FCOE_CTLR_ENABLED: + LIBFCOE_SYSFS_DBG(ctlr, "Cannot change mode when enabled."); + return -EBUSY; + case FCOE_CTLR_DISABLED: + if (!ctlr->f->set_fcoe_ctlr_mode) { + LIBFCOE_SYSFS_DBG(ctlr, + "Mode change not supported by LLD."); + return -ENOTSUPP; + } + + ctlr->mode = fcoe_parse_mode(mode); + if (ctlr->mode == FIP_CONN_TYPE_UNKNOWN) { + LIBFCOE_SYSFS_DBG(ctlr, + "Unknown mode %s provided.", buf); + return -EINVAL; + } + + ctlr->f->set_fcoe_ctlr_mode(ctlr); + LIBFCOE_SYSFS_DBG(ctlr, "Mode changed to %s.", buf); + + return count; + case FCOE_CTLR_UNUSED: + default: + LIBFCOE_SYSFS_DBG(ctlr, "Mode change not supported."); + return -ENOTSUPP; + }; +} + +static FCOE_DEVICE_ATTR(ctlr, mode, S_IRUGO | S_IWUSR, + show_ctlr_mode, store_ctlr_mode); + +static ssize_t store_ctlr_enabled(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fcoe_ctlr_device *ctlr = dev_to_ctlr(dev); + int rc; + + switch (ctlr->enabled) { + case FCOE_CTLR_ENABLED: + if (*buf == '1') + return count; + ctlr->enabled = FCOE_CTLR_DISABLED; + break; + case FCOE_CTLR_DISABLED: + if (*buf == '0') + return count; + ctlr->enabled = FCOE_CTLR_ENABLED; + break; + case FCOE_CTLR_UNUSED: + return -ENOTSUPP; + }; + + rc = ctlr->f->set_fcoe_ctlr_enabled(ctlr); + if (rc) + return rc; + + return count; +} + +static char *ctlr_enabled_state_names[] = { + [ FCOE_CTLR_ENABLED ] = "1", + [ FCOE_CTLR_DISABLED ] = "0", +}; +fcoe_enum_name_search(ctlr_enabled_state, ctlr_enabled_state, + ctlr_enabled_state_names) +#define FCOE_CTLR_ENABLED_MAX_NAMELEN 50 + +static ssize_t show_ctlr_enabled_state(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct fcoe_ctlr_device *ctlr = dev_to_ctlr(dev); + const char *name; + + name = get_fcoe_ctlr_enabled_state_name(ctlr->enabled); + if (!name) + return -EINVAL; + return snprintf(buf, FCOE_CTLR_ENABLED_MAX_NAMELEN, "%s\n", name); } -static FCOE_DEVICE_ATTR(ctlr, mode, S_IRUGO, - show_ctlr_mode, NULL); + +static FCOE_DEVICE_ATTR(ctlr, enabled, S_IRUGO | S_IWUSR, + show_ctlr_enabled_state, + store_ctlr_enabled); static ssize_t store_private_fcoe_ctlr_fcf_dev_loss_tmo(struct device *dev, @@ -359,6 +468,7 @@ static struct attribute_group fcoe_ctlr_lesb_attr_group = { static struct attribute *fcoe_ctlr_attrs[] = { &device_attr_fcoe_ctlr_fcf_dev_loss_tmo.attr, + &device_attr_fcoe_ctlr_enabled.attr, &device_attr_fcoe_ctlr_mode.attr, NULL, }; @@ -443,9 +553,16 @@ struct device_type fcoe_fcf_device_type = { .release = fcoe_fcf_device_release, }; +struct bus_attribute fcoe_bus_attr_group[] = { + __ATTR(ctlr_create, S_IWUSR, NULL, fcoe_ctlr_create_store), + __ATTR(ctlr_destroy, S_IWUSR, NULL, fcoe_ctlr_destroy_store), + __ATTR_NULL +}; + struct bus_type fcoe_bus_type = { .name = "fcoe", .match = &fcoe_bus_match, + .bus_attrs = fcoe_bus_attr_group, }; /** @@ -566,6 +683,7 @@ struct fcoe_ctlr_device *fcoe_ctlr_device_add(struct device *parent, ctlr->id = atomic_inc_return(&ctlr_num) - 1; ctlr->f = f; + ctlr->mode = FIP_CONN_TYPE_FABRIC; INIT_LIST_HEAD(&ctlr->fcfs); mutex_init(&ctlr->lock); ctlr->dev.parent = parent; diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c index ac76d8a..f3a5a53 100644 --- a/drivers/scsi/fcoe/fcoe_transport.c +++ b/drivers/scsi/fcoe/fcoe_transport.c @@ -83,6 +83,50 @@ static struct notifier_block libfcoe_notifier = { .notifier_call = libfcoe_device_notification, }; +/** + * fcoe_link_speed_update() - Update the supported and actual link speeds + * @lport: The local port to update speeds for + * + * Returns: 0 if the ethtool query was successful + * -1 if the ethtool query failed + */ +int fcoe_link_speed_update(struct fc_lport *lport) +{ + struct net_device *netdev = fcoe_get_netdev(lport); + struct ethtool_cmd ecmd; + + if (!__ethtool_get_settings(netdev, &ecmd)) { + lport->link_supported_speeds &= + ~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT); + if (ecmd.supported & (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full)) + lport->link_supported_speeds |= FC_PORTSPEED_1GBIT; + if (ecmd.supported & SUPPORTED_10000baseT_Full) + lport->link_supported_speeds |= + FC_PORTSPEED_10GBIT; + switch (ethtool_cmd_speed(&ecmd)) { + case SPEED_1000: + lport->link_speed = FC_PORTSPEED_1GBIT; + break; + case SPEED_10000: + lport->link_speed = FC_PORTSPEED_10GBIT; + break; + } + return 0; + } + return -1; +} +EXPORT_SYMBOL_GPL(fcoe_link_speed_update); + +/** + * __fcoe_get_lesb() - Get the Link Error Status Block (LESB) for a given lport + * @lport: The local port to update speeds for + * @fc_lesb: Pointer to the LESB to be filled up + * @netdev: Pointer to the netdev that is associated with the lport + * + * Note, the Link Error Status Block (LESB) for FCoE is defined in FC-BB-6 + * Clause 7.11 in v1.04. + */ void __fcoe_get_lesb(struct fc_lport *lport, struct fc_els_lesb *fc_lesb, struct net_device *netdev) @@ -112,6 +156,51 @@ void __fcoe_get_lesb(struct fc_lport *lport, } EXPORT_SYMBOL_GPL(__fcoe_get_lesb); +/** + * fcoe_get_lesb() - Fill the FCoE Link Error Status Block + * @lport: the local port + * @fc_lesb: the link error status block + */ +void fcoe_get_lesb(struct fc_lport *lport, + struct fc_els_lesb *fc_lesb) +{ + struct net_device *netdev = fcoe_get_netdev(lport); + + __fcoe_get_lesb(lport, fc_lesb, netdev); +} +EXPORT_SYMBOL_GPL(fcoe_get_lesb); + +/** + * fcoe_ctlr_get_lesb() - Get the Link Error Status Block (LESB) for a given + * fcoe controller device + * @ctlr_dev: The given fcoe controller device + * + */ +void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev) +{ + struct fcoe_ctlr *fip = fcoe_ctlr_device_priv(ctlr_dev); + struct net_device *netdev = fcoe_get_netdev(fip->lp); + struct fcoe_fc_els_lesb *fcoe_lesb; + struct fc_els_lesb fc_lesb; + + __fcoe_get_lesb(fip->lp, &fc_lesb, netdev); + fcoe_lesb = (struct fcoe_fc_els_lesb *)(&fc_lesb); + + ctlr_dev->lesb.lesb_link_fail = + ntohl(fcoe_lesb->lesb_link_fail); + ctlr_dev->lesb.lesb_vlink_fail = + ntohl(fcoe_lesb->lesb_vlink_fail); + ctlr_dev->lesb.lesb_miss_fka = + ntohl(fcoe_lesb->lesb_miss_fka); + ctlr_dev->lesb.lesb_symb_err = + ntohl(fcoe_lesb->lesb_symb_err); + ctlr_dev->lesb.lesb_err_block = + ntohl(fcoe_lesb->lesb_err_block); + ctlr_dev->lesb.lesb_fcs_error = + ntohl(fcoe_lesb->lesb_fcs_error); +} +EXPORT_SYMBOL_GPL(fcoe_ctlr_get_lesb); + void fcoe_wwn_to_str(u64 wwn, char *buf, int len) { u8 wwpn[8]; @@ -627,6 +716,110 @@ static int libfcoe_device_notification(struct notifier_block *notifier, return NOTIFY_OK; } +ssize_t fcoe_ctlr_create_store(struct bus_type *bus, + const char *buf, size_t count) +{ + struct net_device *netdev = NULL; + struct fcoe_transport *ft = NULL; + struct fcoe_ctlr_device *ctlr_dev = NULL; + int rc = 0; + int err; + + mutex_lock(&ft_mutex); + + netdev = fcoe_if_to_netdev(buf); + if (!netdev) { + LIBFCOE_TRANSPORT_DBG("Invalid device %s.\n", buf); + rc = -ENODEV; + goto out_nodev; + } + + ft = fcoe_netdev_map_lookup(netdev); + if (ft) { + LIBFCOE_TRANSPORT_DBG("transport %s already has existing " + "FCoE instance on %s.\n", + ft->name, netdev->name); + rc = -EEXIST; + goto out_putdev; + } + + ft = fcoe_transport_lookup(netdev); + if (!ft) { + LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n", + netdev->name); + rc = -ENODEV; + goto out_putdev; + } + + /* pass to transport create */ + err = ft->alloc ? ft->alloc(netdev) : -ENODEV; + if (err) { + fcoe_del_netdev_mapping(netdev); + rc = -ENOMEM; + goto out_putdev; + } + + err = fcoe_add_netdev_mapping(netdev, ft); + if (err) { + LIBFCOE_TRANSPORT_DBG("failed to add new netdev mapping " + "for FCoE transport %s for %s.\n", + ft->name, netdev->name); + rc = -ENODEV; + goto out_putdev; + } + + LIBFCOE_TRANSPORT_DBG("transport %s %s to create fcoe on %s.\n", + ft->name, (ctlr_dev) ? "succeeded" : "failed", + netdev->name); + +out_putdev: + dev_put(netdev); +out_nodev: + mutex_unlock(&ft_mutex); + if (rc) + return rc; + return count; +} + +ssize_t fcoe_ctlr_destroy_store(struct bus_type *bus, + const char *buf, size_t count) +{ + int rc = -ENODEV; + struct net_device *netdev = NULL; + struct fcoe_transport *ft = NULL; + + mutex_lock(&ft_mutex); + + netdev = fcoe_if_to_netdev(buf); + if (!netdev) { + LIBFCOE_TRANSPORT_DBG("invalid device %s.\n", buf); + goto out_nodev; + } + + ft = fcoe_netdev_map_lookup(netdev); + if (!ft) { + LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n", + netdev->name); + goto out_putdev; + } + + /* pass to transport destroy */ + rc = ft->destroy(netdev); + if (rc) + goto out_putdev; + + fcoe_del_netdev_mapping(netdev); + LIBFCOE_TRANSPORT_DBG("transport %s %s to destroy fcoe on %s.\n", + ft->name, (rc) ? "failed" : "succeeded", + netdev->name); + rc = count; /* required for successful return */ +out_putdev: + dev_put(netdev); +out_nodev: + mutex_unlock(&ft_mutex); + return rc; +} +EXPORT_SYMBOL(fcoe_ctlr_destroy_store); /** * fcoe_transport_create() - Create a fcoe interface @@ -769,11 +962,7 @@ out_putdev: dev_put(netdev); out_nodev: mutex_unlock(&ft_mutex); - - if (rc == -ERESTARTSYS) - return restart_syscall(); - else - return rc; + return rc; } /** diff --git a/drivers/scsi/fcoe/libfcoe.h b/drivers/scsi/fcoe/libfcoe.h index 6af5fc3..d3bb16d 100644 --- a/drivers/scsi/fcoe/libfcoe.h +++ b/drivers/scsi/fcoe/libfcoe.h @@ -2,9 +2,10 @@ #define _FCOE_LIBFCOE_H_ extern unsigned int libfcoe_debug_logging; -#define LIBFCOE_LOGGING 0x01 /* General logging, not categorized */ -#define LIBFCOE_FIP_LOGGING 0x02 /* FIP logging */ -#define LIBFCOE_TRANSPORT_LOGGING 0x04 /* FCoE transport logging */ +#define LIBFCOE_LOGGING 0x01 /* General logging, not categorized */ +#define LIBFCOE_FIP_LOGGING 0x02 /* FIP logging */ +#define LIBFCOE_TRANSPORT_LOGGING 0x04 /* FCoE transport logging */ +#define LIBFCOE_SYSFS_LOGGING 0x08 /* fcoe_sysfs logging */ #define LIBFCOE_CHECK_LOGGING(LEVEL, CMD) \ do { \ @@ -16,16 +17,19 @@ do { \ #define LIBFCOE_DBG(fmt, args...) \ LIBFCOE_CHECK_LOGGING(LIBFCOE_LOGGING, \ - printk(KERN_INFO "libfcoe: " fmt, ##args);) + pr_info("libfcoe: " fmt, ##args);) #define LIBFCOE_FIP_DBG(fip, fmt, args...) \ LIBFCOE_CHECK_LOGGING(LIBFCOE_FIP_LOGGING, \ - printk(KERN_INFO "host%d: fip: " fmt, \ - (fip)->lp->host->host_no, ##args);) + pr_info("host%d: fip: " fmt, \ + (fip)->lp->host->host_no, ##args);) #define LIBFCOE_TRANSPORT_DBG(fmt, args...) \ LIBFCOE_CHECK_LOGGING(LIBFCOE_TRANSPORT_LOGGING, \ - printk(KERN_INFO "%s: " fmt, \ - __func__, ##args);) + pr_info("%s: " fmt, __func__, ##args);) + +#define LIBFCOE_SYSFS_DBG(cdev, fmt, args...) \ + LIBFCOE_CHECK_LOGGING(LIBFCOE_SYSFS_LOGGING, \ + pr_info("ctlr_%d: " fmt, cdev->id, ##args);) #endif /* _FCOE_LIBFCOE_H_ */ diff --git a/drivers/scsi/fnic/Makefile b/drivers/scsi/fnic/Makefile index 37c3440..383598f 100644 --- a/drivers/scsi/fnic/Makefile +++ b/drivers/scsi/fnic/Makefile @@ -7,6 +7,8 @@ fnic-y := \ fnic_res.o \ fnic_fcs.o \ fnic_scsi.o \ + fnic_trace.o \ + fnic_debugfs.o \ vnic_cq.o \ vnic_dev.o \ vnic_intr.o \ diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h index 95a5ba2..98436c3 100644 --- a/drivers/scsi/fnic/fnic.h +++ b/drivers/scsi/fnic/fnic.h @@ -26,6 +26,7 @@ #include #include "fnic_io.h" #include "fnic_res.h" +#include "fnic_trace.h" #include "vnic_dev.h" #include "vnic_wq.h" #include "vnic_rq.h" @@ -56,6 +57,34 @@ #define FNIC_NO_TAG -1 /* + * Command flags to identify the type of command and for other future + * use. + */ +#define FNIC_NO_FLAGS 0 +#define FNIC_IO_INITIALIZED BIT(0) +#define FNIC_IO_ISSUED BIT(1) +#define FNIC_IO_DONE BIT(2) +#define FNIC_IO_REQ_NULL BIT(3) +#define FNIC_IO_ABTS_PENDING BIT(4) +#define FNIC_IO_ABORTED BIT(5) +#define FNIC_IO_ABTS_ISSUED BIT(6) +#define FNIC_IO_TERM_ISSUED BIT(7) +#define FNIC_IO_INTERNAL_TERM_ISSUED BIT(8) +#define FNIC_IO_ABT_TERM_DONE BIT(9) +#define FNIC_IO_ABT_TERM_REQ_NULL BIT(10) +#define FNIC_IO_ABT_TERM_TIMED_OUT BIT(11) +#define FNIC_DEVICE_RESET BIT(12) /* Device reset request */ +#define FNIC_DEV_RST_ISSUED BIT(13) +#define FNIC_DEV_RST_TIMED_OUT BIT(14) +#define FNIC_DEV_RST_ABTS_ISSUED BIT(15) +#define FNIC_DEV_RST_TERM_ISSUED BIT(16) +#define FNIC_DEV_RST_DONE BIT(17) +#define FNIC_DEV_RST_REQ_NULL BIT(18) +#define FNIC_DEV_RST_ABTS_DONE BIT(19) +#define FNIC_DEV_RST_TERM_DONE BIT(20) +#define FNIC_DEV_RST_ABTS_PENDING BIT(21) + +/* * Usage of the scsi_cmnd scratchpad. * These fields are locked by the hashed io_req_lock. */ @@ -64,6 +93,7 @@ #define CMD_ABTS_STATUS(Cmnd) ((Cmnd)->SCp.Message) #define CMD_LR_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in) #define CMD_TAG(Cmnd) ((Cmnd)->SCp.sent_command) +#define CMD_FLAGS(Cmnd) ((Cmnd)->SCp.Status) #define FCPIO_INVALID_CODE 0x100 /* hdr_status value unused by firmware */ @@ -71,9 +101,28 @@ #define FNIC_HOST_RESET_TIMEOUT 10000 /* mSec */ #define FNIC_RMDEVICE_TIMEOUT 1000 /* mSec */ #define FNIC_HOST_RESET_SETTLE_TIME 30 /* Sec */ +#define FNIC_ABT_TERM_DELAY_TIMEOUT 500 /* mSec */ #define FNIC_MAX_FCP_TARGET 256 +/** + * state_flags to identify host state along along with fnic's state + **/ +#define __FNIC_FLAGS_FWRESET BIT(0) /* fwreset in progress */ +#define __FNIC_FLAGS_BLOCK_IO BIT(1) /* IOs are blocked */ + +#define FNIC_FLAGS_NONE (0) +#define FNIC_FLAGS_FWRESET (__FNIC_FLAGS_FWRESET | \ + __FNIC_FLAGS_BLOCK_IO) + +#define FNIC_FLAGS_IO_BLOCKED (__FNIC_FLAGS_BLOCK_IO) + +#define fnic_set_state_flags(fnicp, st_flags) \ + __fnic_set_state_flags(fnicp, st_flags, 0) + +#define fnic_clear_state_flags(fnicp, st_flags) \ + __fnic_set_state_flags(fnicp, st_flags, 1) + extern unsigned int fnic_log_level; #define FNIC_MAIN_LOGGING 0x01 @@ -170,6 +219,9 @@ struct fnic { struct completion *remove_wait; /* device remove thread blocks */ + atomic_t in_flight; /* io counter */ + u32 _reserved; /* fill hole */ + unsigned long state_flags; /* protected by host lock */ enum fnic_state state; spinlock_t fnic_lock; @@ -267,4 +319,12 @@ const char *fnic_state_to_str(unsigned int state); void fnic_log_q_error(struct fnic *fnic); void fnic_handle_link_event(struct fnic *fnic); +int fnic_is_abts_pending(struct fnic *, struct scsi_cmnd *); + +static inline int +fnic_chk_state_flags_locked(struct fnic *fnic, unsigned long st_flags) +{ + return ((fnic->state_flags & st_flags) == st_flags); +} +void __fnic_set_state_flags(struct fnic *, unsigned long, unsigned long); #endif /* _FNIC_H_ */ diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c new file mode 100644 index 0000000..adc1f7f --- /dev/null +++ b/drivers/scsi/fnic/fnic_debugfs.c @@ -0,0 +1,314 @@ +/* + * Copyright 2012 Cisco Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include "fnic.h" + +static struct dentry *fnic_trace_debugfs_root; +static struct dentry *fnic_trace_debugfs_file; +static struct dentry *fnic_trace_enable; + +/* + * fnic_trace_ctrl_open - Open the trace_enable file + * @inode: The inode pointer. + * @file: The file pointer to attach the trace enable/disable flag. + * + * Description: + * This routine opens a debugsfs file trace_enable. + * + * Returns: + * This function returns zero if successful. + */ +static int fnic_trace_ctrl_open(struct inode *inode, struct file *filp) +{ + filp->private_data = inode->i_private; + return 0; +} + +/* + * fnic_trace_ctrl_read - Read a trace_enable debugfs file + * @filp: The file pointer to read from. + * @ubuf: The buffer to copy the data to. + * @cnt: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads value of variable fnic_tracing_enabled + * and stores into local @buf. It will start reading file at @ppos and + * copy up to @cnt of data to @ubuf from @buf. + * + * Returns: + * This function returns the amount of data that was read. + */ +static ssize_t fnic_trace_ctrl_read(struct file *filp, + char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[64]; + int len; + len = sprintf(buf, "%u\n", fnic_tracing_enabled); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, len); +} + +/* + * fnic_trace_ctrl_write - Write to trace_enable debugfs file + * @filp: The file pointer to write from. + * @ubuf: The buffer to copy the data from. + * @cnt: The number of bytes to write. + * @ppos: The position in the file to start writing to. + * + * Description: + * This routine writes data from user buffer @ubuf to buffer @buf and + * sets fnic_tracing_enabled value as per user input. + * + * Returns: + * This function returns the amount of data that was written. + */ +static ssize_t fnic_trace_ctrl_write(struct file *filp, + const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[64]; + unsigned long val; + int ret; + + if (cnt >= sizeof(buf)) + return -EINVAL; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + ret = kstrtoul(buf, 10, &val); + if (ret < 0) + return ret; + + fnic_tracing_enabled = val; + (*ppos)++; + + return cnt; +} + +/* + * fnic_trace_debugfs_open - Open the fnic trace log + * @inode: The inode pointer + * @file: The file pointer to attach the log output + * + * Description: + * This routine is the entry point for the debugfs open file operation. + * It allocates the necessary buffer for the log, fills the buffer from + * the in-memory log and then returns a pointer to that log in + * the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return + * a negative error value. + */ +static int fnic_trace_debugfs_open(struct inode *inode, + struct file *file) +{ + fnic_dbgfs_t *fnic_dbg_prt; + fnic_dbg_prt = kzalloc(sizeof(fnic_dbgfs_t), GFP_KERNEL); + if (!fnic_dbg_prt) + return -ENOMEM; + + fnic_dbg_prt->buffer = vmalloc((3*(trace_max_pages * PAGE_SIZE))); + if (!fnic_dbg_prt->buffer) { + kfree(fnic_dbg_prt); + return -ENOMEM; + } + memset((void *)fnic_dbg_prt->buffer, 0, + (3*(trace_max_pages * PAGE_SIZE))); + fnic_dbg_prt->buffer_len = fnic_get_trace_data(fnic_dbg_prt); + file->private_data = fnic_dbg_prt; + return 0; +} + +/* + * fnic_trace_debugfs_lseek - Seek through a debugfs file + * @file: The file pointer to seek through. + * @offset: The offset to seek to or the amount to seek by. + * @howto: Indicates how to seek. + * + * Description: + * This routine is the entry point for the debugfs lseek file operation. + * The @howto parameter indicates whether @offset is the offset to directly + * seek to, or if it is a value to seek forward or reverse by. This function + * figures out what the new offset of the debugfs file will be and assigns + * that value to the f_pos field of @file. + * + * Returns: + * This function returns the new offset if successful and returns a negative + * error if unable to process the seek. + */ +static loff_t fnic_trace_debugfs_lseek(struct file *file, + loff_t offset, + int howto) +{ + fnic_dbgfs_t *fnic_dbg_prt = file->private_data; + loff_t pos = -1; + + switch (howto) { + case 0: + pos = offset; + break; + case 1: + pos = file->f_pos + offset; + break; + case 2: + pos = fnic_dbg_prt->buffer_len - offset; + } + return (pos < 0 || pos > fnic_dbg_prt->buffer_len) ? + -EINVAL : (file->f_pos = pos); +} + +/* + * fnic_trace_debugfs_read - Read a debugfs file + * @file: The file pointer to read from. + * @ubuf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @pos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the buffer indicated in the private_data + * field of @file. It will start reading at @pos and copy up to @nbytes of + * data to @ubuf. + * + * Returns: + * This function returns the amount of data that was read (this could be + * less than @nbytes if the end of the file was reached). + */ +static ssize_t fnic_trace_debugfs_read(struct file *file, + char __user *ubuf, + size_t nbytes, + loff_t *pos) +{ + fnic_dbgfs_t *fnic_dbg_prt = file->private_data; + int rc = 0; + rc = simple_read_from_buffer(ubuf, nbytes, pos, + fnic_dbg_prt->buffer, + fnic_dbg_prt->buffer_len); + return rc; +} + +/* + * fnic_trace_debugfs_release - Release the buffer used to store + * debugfs file data + * @inode: The inode pointer + * @file: The file pointer that contains the buffer to release + * + * Description: + * This routine frees the buffer that was allocated when the debugfs + * file was opened. + * + * Returns: + * This function returns zero. + */ +static int fnic_trace_debugfs_release(struct inode *inode, + struct file *file) +{ + fnic_dbgfs_t *fnic_dbg_prt = file->private_data; + + vfree(fnic_dbg_prt->buffer); + kfree(fnic_dbg_prt); + return 0; +} + +static const struct file_operations fnic_trace_ctrl_fops = { + .owner = THIS_MODULE, + .open = fnic_trace_ctrl_open, + .read = fnic_trace_ctrl_read, + .write = fnic_trace_ctrl_write, +}; + +static const struct file_operations fnic_trace_debugfs_fops = { + .owner = THIS_MODULE, + .open = fnic_trace_debugfs_open, + .llseek = fnic_trace_debugfs_lseek, + .read = fnic_trace_debugfs_read, + .release = fnic_trace_debugfs_release, +}; + +/* + * fnic_trace_debugfs_init - Initialize debugfs for fnic trace logging + * + * Description: + * When Debugfs is configured this routine sets up the fnic debugfs + * file system. If not already created, this routine will create the + * fnic directory. It will create file trace to log fnic trace buffer + * output into debugfs and it will also create file trace_enable to + * control enable/disable of trace logging into trace buffer. + */ +int fnic_trace_debugfs_init(void) +{ + int rc = -1; + fnic_trace_debugfs_root = debugfs_create_dir("fnic", NULL); + if (!fnic_trace_debugfs_root) { + printk(KERN_DEBUG "Cannot create debugfs root\n"); + return rc; + } + fnic_trace_enable = debugfs_create_file("tracing_enable", + S_IFREG|S_IRUGO|S_IWUSR, + fnic_trace_debugfs_root, + NULL, &fnic_trace_ctrl_fops); + + if (!fnic_trace_enable) { + printk(KERN_DEBUG "Cannot create trace_enable file" + " under debugfs"); + return rc; + } + + fnic_trace_debugfs_file = debugfs_create_file("trace", + S_IFREG|S_IRUGO|S_IWUSR, + fnic_trace_debugfs_root, + NULL, + &fnic_trace_debugfs_fops); + + if (!fnic_trace_debugfs_file) { + printk(KERN_DEBUG "Cannot create trace file under debugfs"); + return rc; + } + rc = 0; + return rc; +} + +/* + * fnic_trace_debugfs_terminate - Tear down debugfs infrastructure + * + * Description: + * When Debugfs is configured this routine removes debugfs file system + * elements that are specific to fnic trace logging. + */ +void fnic_trace_debugfs_terminate(void) +{ + if (fnic_trace_debugfs_file) { + debugfs_remove(fnic_trace_debugfs_file); + fnic_trace_debugfs_file = NULL; + } + if (fnic_trace_enable) { + debugfs_remove(fnic_trace_enable); + fnic_trace_enable = NULL; + } + if (fnic_trace_debugfs_root) { + debugfs_remove(fnic_trace_debugfs_root); + fnic_trace_debugfs_root = NULL; + } +} diff --git a/drivers/scsi/fnic/fnic_io.h b/drivers/scsi/fnic/fnic_io.h index f0b8969..c35b8f1 100644 --- a/drivers/scsi/fnic/fnic_io.h +++ b/drivers/scsi/fnic/fnic_io.h @@ -21,7 +21,7 @@ #include #define FNIC_DFLT_SG_DESC_CNT 32 -#define FNIC_MAX_SG_DESC_CNT 1024 /* Maximum descriptors per sgl */ +#define FNIC_MAX_SG_DESC_CNT 256 /* Maximum descriptors per sgl */ #define FNIC_SG_DESC_ALIGN 16 /* Descriptor address alignment */ struct host_sg_desc { @@ -45,7 +45,8 @@ enum fnic_sgl_list_type { }; enum fnic_ioreq_state { - FNIC_IOREQ_CMD_PENDING = 0, + FNIC_IOREQ_NOT_INITED = 0, + FNIC_IOREQ_CMD_PENDING, FNIC_IOREQ_ABTS_PENDING, FNIC_IOREQ_ABTS_COMPLETE, FNIC_IOREQ_CMD_COMPLETE, @@ -60,6 +61,7 @@ struct fnic_io_req { u8 sgl_type; /* device DMA descriptor list type */ u8 io_completed:1; /* set to 1 when fw completes IO */ u32 port_id; /* remote port DID */ + unsigned long start_time; /* in jiffies */ struct completion *abts_done; /* completion for abts */ struct completion *dr_done; /* completion for device reset */ }; diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c index fbf3ac6..d601ac5 100644 --- a/drivers/scsi/fnic/fnic_main.c +++ b/drivers/scsi/fnic/fnic_main.c @@ -68,6 +68,10 @@ unsigned int fnic_log_level; module_param(fnic_log_level, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(fnic_log_level, "bit mask of fnic logging levels"); +unsigned int fnic_trace_max_pages = 16; +module_param(fnic_trace_max_pages, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(fnic_trace_max_pages, "Total allocated memory pages " + "for fnic trace buffer"); static struct libfc_function_template fnic_transport_template = { .frame_send = fnic_send, @@ -624,6 +628,9 @@ static int fnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } fnic->state = FNIC_IN_FC_MODE; + atomic_set(&fnic->in_flight, 0); + fnic->state_flags = FNIC_FLAGS_NONE; + /* Enable hardware stripping of vlan header on ingress */ fnic_set_nic_config(fnic, 0, 0, 0, 0, 0, 0, 1); @@ -858,6 +865,14 @@ static int __init fnic_init_module(void) printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION); + /* Allocate memory for trace buffer */ + err = fnic_trace_buf_init(); + if (err < 0) { + printk(KERN_ERR PFX "Trace buffer initialization Failed " + "Fnic Tracing utility is disabled\n"); + fnic_trace_free(); + } + /* Create a cache for allocation of default size sgls */ len = sizeof(struct fnic_dflt_sgl_list); fnic_sgl_cache[FNIC_SGL_CACHE_DFLT] = kmem_cache_create @@ -928,6 +943,7 @@ err_create_fnic_ioreq_slab: err_create_fnic_sgl_slab_max: kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); err_create_fnic_sgl_slab_dflt: + fnic_trace_free(); return err; } @@ -939,6 +955,7 @@ static void __exit fnic_cleanup_module(void) kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); kmem_cache_destroy(fnic_io_req_cache); fc_release_transport(fnic_fc_transport); + fnic_trace_free(); } module_init(fnic_init_module); diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index c40ce52..be99e75 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -47,6 +47,7 @@ const char *fnic_state_str[] = { }; static const char *fnic_ioreq_state_str[] = { + [FNIC_IOREQ_NOT_INITED] = "FNIC_IOREQ_NOT_INITED", [FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING", [FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING", [FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE", @@ -165,6 +166,33 @@ static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq) } +/** + * __fnic_set_state_flags + * Sets/Clears bits in fnic's state_flags + **/ +void +__fnic_set_state_flags(struct fnic *fnic, unsigned long st_flags, + unsigned long clearbits) +{ + struct Scsi_Host *host = fnic->lport->host; + int sh_locked = spin_is_locked(host->host_lock); + unsigned long flags = 0; + + if (!sh_locked) + spin_lock_irqsave(host->host_lock, flags); + + if (clearbits) + fnic->state_flags &= ~st_flags; + else + fnic->state_flags |= st_flags; + + if (!sh_locked) + spin_unlock_irqrestore(host->host_lock, flags); + + return; +} + + /* * fnic_fw_reset_handler * Routine to send reset msg to fw @@ -175,9 +203,16 @@ int fnic_fw_reset_handler(struct fnic *fnic) int ret = 0; unsigned long flags; + /* indicate fwreset to io path */ + fnic_set_state_flags(fnic, FNIC_FLAGS_FWRESET); + skb_queue_purge(&fnic->frame_queue); skb_queue_purge(&fnic->tx_queue); + /* wait for io cmpl */ + while (atomic_read(&fnic->in_flight)) + schedule_timeout(msecs_to_jiffies(1)); + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) @@ -193,9 +228,12 @@ int fnic_fw_reset_handler(struct fnic *fnic) if (!ret) FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "Issued fw reset\n"); - else + else { + fnic_clear_state_flags(fnic, FNIC_FLAGS_FWRESET); FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "Failed to issue fw reset\n"); + } + return ret; } @@ -312,6 +350,8 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, if (unlikely(!vnic_wq_copy_desc_avail(wq))) { spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host, + "fnic_queue_wq_copy_desc failure - no descriptors\n"); return SCSI_MLQUEUE_HOST_BUSY; } @@ -351,16 +391,20 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, */ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) { - struct fc_lport *lp; + struct fc_lport *lp = shost_priv(sc->device->host); struct fc_rport *rport; - struct fnic_io_req *io_req; - struct fnic *fnic; + struct fnic_io_req *io_req = NULL; + struct fnic *fnic = lport_priv(lp); struct vnic_wq_copy *wq; int ret; - int sg_count; + u64 cmd_trace; + int sg_count = 0; unsigned long flags; unsigned long ptr; + if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_IO_BLOCKED))) + return SCSI_MLQUEUE_HOST_BUSY; + rport = starget_to_rport(scsi_target(sc->device)); ret = fc_remote_port_chkready(rport); if (ret) { @@ -369,20 +413,21 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_ return 0; } - lp = shost_priv(sc->device->host); if (lp->state != LPORT_ST_READY || !(lp->link_up)) return SCSI_MLQUEUE_HOST_BUSY; + atomic_inc(&fnic->in_flight); + /* * Release host lock, use driver resource specific locks from here. * Don't re-enable interrupts in case they were disabled prior to the * caller disabling them. */ spin_unlock(lp->host->host_lock); + CMD_STATE(sc) = FNIC_IOREQ_NOT_INITED; + CMD_FLAGS(sc) = FNIC_NO_FLAGS; /* Get a new io_req for this SCSI IO */ - fnic = lport_priv(lp); - io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC); if (!io_req) { ret = SCSI_MLQUEUE_HOST_BUSY; @@ -393,6 +438,9 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_ /* Map the data buffer */ sg_count = scsi_dma_map(sc); if (sg_count < 0) { + FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no, + sc->request->tag, sc, 0, sc->cmnd[0], + sg_count, CMD_STATE(sc)); mempool_free(io_req, fnic->io_req_pool); goto out; } @@ -427,8 +475,10 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_ /* initialize rest of io_req */ io_req->port_id = rport->port_id; + io_req->start_time = jiffies; CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING; CMD_SP(sc) = (char *)io_req; + CMD_FLAGS(sc) |= FNIC_IO_INITIALIZED; sc->scsi_done = done; /* create copy wq desc and enqueue it */ @@ -440,7 +490,9 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_ * refetch the pointer under the lock. */ spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc); - + FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no, + sc->request->tag, sc, 0, 0, 0, + (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc))); spin_lock_irqsave(io_lock, flags); io_req = (struct fnic_io_req *)CMD_SP(sc); CMD_SP(sc) = NULL; @@ -450,8 +502,21 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_ fnic_release_ioreq_buf(fnic, io_req, sc); mempool_free(io_req, fnic->io_req_pool); } + } else { + /* REVISIT: Use per IO lock in the final code */ + CMD_FLAGS(sc) |= FNIC_IO_ISSUED; } out: + cmd_trace = ((u64)sc->cmnd[0] << 56 | (u64)sc->cmnd[7] << 40 | + (u64)sc->cmnd[8] << 32 | (u64)sc->cmnd[2] << 24 | + (u64)sc->cmnd[3] << 16 | (u64)sc->cmnd[4] << 8 | + sc->cmnd[5]); + + FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no, + sc->request->tag, sc, io_req, + sg_count, cmd_trace, + (((u64)CMD_FLAGS(sc) >> 32) | CMD_STATE(sc))); + atomic_dec(&fnic->in_flight); /* acquire host lock before returning to SCSI */ spin_lock(lp->host->host_lock); return ret; @@ -529,6 +594,8 @@ static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic, fnic_flush_tx(fnic); reset_cmpl_handler_end: + fnic_clear_state_flags(fnic, FNIC_FLAGS_FWRESET); + return ret; } @@ -622,6 +689,7 @@ static inline void fnic_fcpio_ack_handler(struct fnic *fnic, struct vnic_wq_copy *wq; u16 request_out = desc->u.ack.request_out; unsigned long flags; + u64 *ox_id_tag = (u64 *)(void *)desc; /* mark the ack state */ wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count]; @@ -632,6 +700,9 @@ static inline void fnic_fcpio_ack_handler(struct fnic *fnic, fnic->fw_ack_recd[0] = 1; } spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + FNIC_TRACE(fnic_fcpio_ack_handler, + fnic->lport->host->host_no, 0, 0, ox_id_tag[2], ox_id_tag[3], + ox_id_tag[4], ox_id_tag[5]); } /* @@ -651,27 +722,53 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, struct scsi_cmnd *sc; unsigned long flags; spinlock_t *io_lock; + u64 cmd_trace; + unsigned long start_time; /* Decode the cmpl description to get the io_req id */ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); fcpio_tag_id_dec(&tag, &id); + icmnd_cmpl = &desc->u.icmnd_cmpl; - if (id >= FNIC_MAX_IO_REQ) + if (id >= FNIC_MAX_IO_REQ) { + shost_printk(KERN_ERR, fnic->lport->host, + "Tag out of range tag %x hdr status = %s\n", + id, fnic_fcpio_status_to_str(hdr_status)); return; + } sc = scsi_host_find_tag(fnic->lport->host, id); WARN_ON_ONCE(!sc); - if (!sc) + if (!sc) { + shost_printk(KERN_ERR, fnic->lport->host, + "icmnd_cmpl sc is null - " + "hdr status = %s tag = 0x%x desc = 0x%p\n", + fnic_fcpio_status_to_str(hdr_status), id, desc); + FNIC_TRACE(fnic_fcpio_icmnd_cmpl_handler, + fnic->lport->host->host_no, id, + ((u64)icmnd_cmpl->_resvd0[1] << 16 | + (u64)icmnd_cmpl->_resvd0[0]), + ((u64)hdr_status << 16 | + (u64)icmnd_cmpl->scsi_status << 8 | + (u64)icmnd_cmpl->flags), desc, + (u64)icmnd_cmpl->residual, 0); return; + } io_lock = fnic_io_lock_hash(fnic, sc); spin_lock_irqsave(io_lock, flags); io_req = (struct fnic_io_req *)CMD_SP(sc); WARN_ON_ONCE(!io_req); if (!io_req) { + CMD_FLAGS(sc) |= FNIC_IO_REQ_NULL; spin_unlock_irqrestore(io_lock, flags); + shost_printk(KERN_ERR, fnic->lport->host, + "icmnd_cmpl io_req is null - " + "hdr status = %s tag = 0x%x sc 0x%p\n", + fnic_fcpio_status_to_str(hdr_status), id, sc); return; } + start_time = io_req->start_time; /* firmware completed the io */ io_req->io_completed = 1; @@ -682,6 +779,28 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, */ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { spin_unlock_irqrestore(io_lock, flags); + CMD_FLAGS(sc) |= FNIC_IO_ABTS_PENDING; + switch (hdr_status) { + case FCPIO_SUCCESS: + CMD_FLAGS(sc) |= FNIC_IO_DONE; + FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host, + "icmnd_cmpl ABTS pending hdr status = %s " + "sc 0x%p scsi_status %x residual %d\n", + fnic_fcpio_status_to_str(hdr_status), sc, + icmnd_cmpl->scsi_status, + icmnd_cmpl->residual); + break; + case FCPIO_ABORTED: + CMD_FLAGS(sc) |= FNIC_IO_ABORTED; + break; + default: + FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host, + "icmnd_cmpl abts pending " + "hdr status = %s tag = 0x%x sc = 0x%p\n", + fnic_fcpio_status_to_str(hdr_status), + id, sc); + break; + } return; } @@ -765,6 +884,7 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, /* Break link with the SCSI command */ CMD_SP(sc) = NULL; + CMD_FLAGS(sc) |= FNIC_IO_DONE; spin_unlock_irqrestore(io_lock, flags); @@ -772,6 +892,20 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, mempool_free(io_req, fnic->io_req_pool); + cmd_trace = ((u64)hdr_status << 56) | + (u64)icmnd_cmpl->scsi_status << 48 | + (u64)icmnd_cmpl->flags << 40 | (u64)sc->cmnd[0] << 32 | + (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 | + (u64)sc->cmnd[4] << 8 | sc->cmnd[5]; + + FNIC_TRACE(fnic_fcpio_icmnd_cmpl_handler, + sc->device->host->host_no, id, sc, + ((u64)icmnd_cmpl->_resvd0[1] << 56 | + (u64)icmnd_cmpl->_resvd0[0] << 48 | + jiffies_to_msecs(jiffies - start_time)), + desc, cmd_trace, + (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc))); + if (sc->sc_data_direction == DMA_FROM_DEVICE) { fnic->lport->host_stats.fcp_input_requests++; fnic->fcp_input_bytes += xfer_len; @@ -784,7 +918,6 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, /* Call SCSI completion function to complete the IO */ if (sc->scsi_done) sc->scsi_done(sc); - } /* fnic_fcpio_itmf_cmpl_handler @@ -801,28 +934,54 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, struct fnic_io_req *io_req; unsigned long flags; spinlock_t *io_lock; + unsigned long start_time; fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); fcpio_tag_id_dec(&tag, &id); - if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ) + if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ) { + shost_printk(KERN_ERR, fnic->lport->host, + "Tag out of range tag %x hdr status = %s\n", + id, fnic_fcpio_status_to_str(hdr_status)); return; + } sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK); WARN_ON_ONCE(!sc); - if (!sc) + if (!sc) { + shost_printk(KERN_ERR, fnic->lport->host, + "itmf_cmpl sc is null - hdr status = %s tag = 0x%x\n", + fnic_fcpio_status_to_str(hdr_status), id); return; - + } io_lock = fnic_io_lock_hash(fnic, sc); spin_lock_irqsave(io_lock, flags); io_req = (struct fnic_io_req *)CMD_SP(sc); WARN_ON_ONCE(!io_req); if (!io_req) { spin_unlock_irqrestore(io_lock, flags); + CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_REQ_NULL; + shost_printk(KERN_ERR, fnic->lport->host, + "itmf_cmpl io_req is null - " + "hdr status = %s tag = 0x%x sc 0x%p\n", + fnic_fcpio_status_to_str(hdr_status), id, sc); return; } + start_time = io_req->start_time; - if (id & FNIC_TAG_ABORT) { + if ((id & FNIC_TAG_ABORT) && (id & FNIC_TAG_DEV_RST)) { + /* Abort and terminate completion of device reset req */ + /* REVISIT : Add asserts about various flags */ + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "dev reset abts cmpl recd. id %x status %s\n", + id, fnic_fcpio_status_to_str(hdr_status)); + CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE; + CMD_ABTS_STATUS(sc) = hdr_status; + CMD_FLAGS(sc) |= FNIC_DEV_RST_DONE; + if (io_req->abts_done) + complete(io_req->abts_done); + spin_unlock_irqrestore(io_lock, flags); + } else if (id & FNIC_TAG_ABORT) { /* Completion of abort cmd */ if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) { /* This is a late completion. Ignore it */ @@ -832,6 +991,7 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE; CMD_ABTS_STATUS(sc) = hdr_status; + CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE; FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "abts cmpl recd. id %d status %s\n", (int)(id & FNIC_TAG_MASK), @@ -855,14 +1015,58 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, fnic_release_ioreq_buf(fnic, io_req, sc); mempool_free(io_req, fnic->io_req_pool); - if (sc->scsi_done) + if (sc->scsi_done) { + FNIC_TRACE(fnic_fcpio_itmf_cmpl_handler, + sc->device->host->host_no, id, + sc, + jiffies_to_msecs(jiffies - start_time), + desc, + (((u64)hdr_status << 40) | + (u64)sc->cmnd[0] << 32 | + (u64)sc->cmnd[2] << 24 | + (u64)sc->cmnd[3] << 16 | + (u64)sc->cmnd[4] << 8 | sc->cmnd[5]), + (((u64)CMD_FLAGS(sc) << 32) | + CMD_STATE(sc))); sc->scsi_done(sc); + } } } else if (id & FNIC_TAG_DEV_RST) { /* Completion of device reset */ CMD_LR_STATUS(sc) = hdr_status; + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + CMD_FLAGS(sc) |= FNIC_DEV_RST_ABTS_PENDING; + FNIC_TRACE(fnic_fcpio_itmf_cmpl_handler, + sc->device->host->host_no, id, sc, + jiffies_to_msecs(jiffies - start_time), + desc, 0, + (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc))); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Terminate pending " + "dev reset cmpl recd. id %d status %s\n", + (int)(id & FNIC_TAG_MASK), + fnic_fcpio_status_to_str(hdr_status)); + return; + } + if (CMD_FLAGS(sc) & FNIC_DEV_RST_TIMED_OUT) { + /* Need to wait for terminate completion */ + spin_unlock_irqrestore(io_lock, flags); + FNIC_TRACE(fnic_fcpio_itmf_cmpl_handler, + sc->device->host->host_no, id, sc, + jiffies_to_msecs(jiffies - start_time), + desc, 0, + (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc))); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "dev reset cmpl recd after time out. " + "id %d status %s\n", + (int)(id & FNIC_TAG_MASK), + fnic_fcpio_status_to_str(hdr_status)); + return; + } CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + CMD_FLAGS(sc) |= FNIC_DEV_RST_DONE; FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "dev reset cmpl recd. id %d status %s\n", (int)(id & FNIC_TAG_MASK), @@ -889,7 +1093,6 @@ static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev, struct fcpio_fw_req *desc) { struct fnic *fnic = vnic_dev_priv(vdev); - int ret = 0; switch (desc->hdr.type) { case FCPIO_ACK: /* fw copied copy wq desc to its queue */ @@ -906,11 +1109,11 @@ static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev, case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */ case FCPIO_FLOGI_FIP_REG_CMPL: /* fw completed flogi_fip_reg */ - ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc); + fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc); break; case FCPIO_RESET_CMPL: /* fw completed reset */ - ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc); + fnic_fcpio_fw_reset_cmpl_handler(fnic, desc); break; default: @@ -920,7 +1123,7 @@ static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev, break; } - return ret; + return 0; } /* @@ -950,6 +1153,7 @@ static void fnic_cleanup_io(struct fnic *fnic, int exclude_id) unsigned long flags = 0; struct scsi_cmnd *sc; spinlock_t *io_lock; + unsigned long start_time = 0; for (i = 0; i < FNIC_MAX_IO_REQ; i++) { if (i == exclude_id) @@ -962,6 +1166,23 @@ static void fnic_cleanup_io(struct fnic *fnic, int exclude_id) io_lock = fnic_io_lock_hash(fnic, sc); spin_lock_irqsave(io_lock, flags); io_req = (struct fnic_io_req *)CMD_SP(sc); + if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) && + !(CMD_FLAGS(sc) & FNIC_DEV_RST_DONE)) { + /* + * We will be here only when FW completes reset + * without sending completions for outstanding ios. + */ + CMD_FLAGS(sc) |= FNIC_DEV_RST_DONE; + if (io_req && io_req->dr_done) + complete(io_req->dr_done); + else if (io_req && io_req->abts_done) + complete(io_req->abts_done); + spin_unlock_irqrestore(io_lock, flags); + continue; + } else if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } if (!io_req) { spin_unlock_irqrestore(io_lock, flags); goto cleanup_scsi_cmd; @@ -975,6 +1196,7 @@ static void fnic_cleanup_io(struct fnic *fnic, int exclude_id) * If there is a scsi_cmnd associated with this io_req, then * free the corresponding state */ + start_time = io_req->start_time; fnic_release_ioreq_buf(fnic, io_req, sc); mempool_free(io_req, fnic->io_req_pool); @@ -984,8 +1206,18 @@ cleanup_scsi_cmd: " DID_TRANSPORT_DISRUPTED\n"); /* Complete the command to SCSI */ - if (sc->scsi_done) + if (sc->scsi_done) { + FNIC_TRACE(fnic_cleanup_io, + sc->device->host->host_no, i, sc, + jiffies_to_msecs(jiffies - start_time), + 0, ((u64)sc->cmnd[0] << 32 | + (u64)sc->cmnd[2] << 24 | + (u64)sc->cmnd[3] << 16 | + (u64)sc->cmnd[4] << 8 | sc->cmnd[5]), + (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc))); + sc->scsi_done(sc); + } } } @@ -998,6 +1230,7 @@ void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, struct scsi_cmnd *sc; unsigned long flags; spinlock_t *io_lock; + unsigned long start_time = 0; /* get the tag reference */ fcpio_tag_id_dec(&desc->hdr.tag, &id); @@ -1027,6 +1260,7 @@ void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, spin_unlock_irqrestore(io_lock, flags); + start_time = io_req->start_time; fnic_release_ioreq_buf(fnic, io_req, sc); mempool_free(io_req, fnic->io_req_pool); @@ -1035,8 +1269,17 @@ wq_copy_cleanup_scsi_cmd: FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:" " DID_NO_CONNECT\n"); - if (sc->scsi_done) + if (sc->scsi_done) { + FNIC_TRACE(fnic_wq_copy_cleanup_handler, + sc->device->host->host_no, id, sc, + jiffies_to_msecs(jiffies - start_time), + 0, ((u64)sc->cmnd[0] << 32 | + (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 | + (u64)sc->cmnd[4] << 8 | sc->cmnd[5]), + (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc))); + sc->scsi_done(sc); + } } static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag, @@ -1044,8 +1287,18 @@ static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag, struct fnic_io_req *io_req) { struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + struct Scsi_Host *host = fnic->lport->host; unsigned long flags; + spin_lock_irqsave(host->host_lock, flags); + if (unlikely(fnic_chk_state_flags_locked(fnic, + FNIC_FLAGS_IO_BLOCKED))) { + spin_unlock_irqrestore(host->host_lock, flags); + return 1; + } else + atomic_inc(&fnic->in_flight); + spin_unlock_irqrestore(host->host_lock, flags); + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) @@ -1053,6 +1306,9 @@ static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag, if (!vnic_wq_copy_desc_avail(wq)) { spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + atomic_dec(&fnic->in_flight); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_queue_abort_io_req: failure: no descriptors\n"); return 1; } fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT, @@ -1060,12 +1316,15 @@ static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag, fnic->config.ra_tov, fnic->config.ed_tov); spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + atomic_dec(&fnic->in_flight); + return 0; } -void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) +static void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) { int tag; + int abt_tag; struct fnic_io_req *io_req; spinlock_t *io_lock; unsigned long flags; @@ -1075,13 +1334,14 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, - "fnic_rport_reset_exch called portid 0x%06x\n", + "fnic_rport_exch_reset called portid 0x%06x\n", port_id); if (fnic->in_remove) return; for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + abt_tag = tag; sc = scsi_host_find_tag(fnic->lport->host, tag); if (!sc) continue; @@ -1096,6 +1356,15 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) continue; } + if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) && + (!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_rport_exch_reset dev rst not pending sc 0x%p\n", + sc); + spin_unlock_irqrestore(io_lock, flags); + continue; + } + /* * Found IO that is still pending with firmware and * belongs to rport that went away @@ -1104,9 +1373,29 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) spin_unlock_irqrestore(io_lock, flags); continue; } + if (io_req->abts_done) { + shost_printk(KERN_ERR, fnic->lport->host, + "fnic_rport_exch_reset: io_req->abts_done is set " + "state is %s\n", + fnic_ioreq_state_to_str(CMD_STATE(sc))); + } + + if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED)) { + shost_printk(KERN_ERR, fnic->lport->host, + "rport_exch_reset " + "IO not yet issued %p tag 0x%x flags " + "%x state %d\n", + sc, tag, CMD_FLAGS(sc), CMD_STATE(sc)); + } old_ioreq_state = CMD_STATE(sc); CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) { + abt_tag = (tag | FNIC_TAG_DEV_RST); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_rport_exch_reset dev rst sc 0x%p\n", + sc); + } BUG_ON(io_req->abts_done); @@ -1118,7 +1407,7 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) /* Now queue the abort command to firmware */ int_to_scsilun(sc->device->lun, &fc_lun); - if (fnic_queue_abort_io_req(fnic, tag, + if (fnic_queue_abort_io_req(fnic, abt_tag, FCPIO_ITMF_ABT_TASK_TERM, fc_lun.scsi_lun, io_req)) { /* @@ -1127,12 +1416,17 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) * aborted later by scsi_eh, or cleaned up during * lun reset */ - io_lock = fnic_io_lock_hash(fnic, sc); - spin_lock_irqsave(io_lock, flags); if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) CMD_STATE(sc) = old_ioreq_state; spin_unlock_irqrestore(io_lock, flags); + } else { + spin_lock_irqsave(io_lock, flags); + if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) + CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED; + else + CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED; + spin_unlock_irqrestore(io_lock, flags); } } @@ -1141,6 +1435,7 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) void fnic_terminate_rport_io(struct fc_rport *rport) { int tag; + int abt_tag; struct fnic_io_req *io_req; spinlock_t *io_lock; unsigned long flags; @@ -1154,14 +1449,15 @@ void fnic_terminate_rport_io(struct fc_rport *rport) FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "fnic_terminate_rport_io called" - " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n", - rport->port_name, rport->node_name, + " wwpn 0x%llx, wwnn0x%llx, rport 0x%p, portid 0x%06x\n", + rport->port_name, rport->node_name, rport, rport->port_id); if (fnic->in_remove) return; for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + abt_tag = tag; sc = scsi_host_find_tag(fnic->lport->host, tag); if (!sc) continue; @@ -1180,6 +1476,14 @@ void fnic_terminate_rport_io(struct fc_rport *rport) continue; } + if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) && + (!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_terminate_rport_io dev rst not pending sc 0x%p\n", + sc); + spin_unlock_irqrestore(io_lock, flags); + continue; + } /* * Found IO that is still pending with firmware and * belongs to rport that went away @@ -1188,9 +1492,27 @@ void fnic_terminate_rport_io(struct fc_rport *rport) spin_unlock_irqrestore(io_lock, flags); continue; } + if (io_req->abts_done) { + shost_printk(KERN_ERR, fnic->lport->host, + "fnic_terminate_rport_io: io_req->abts_done is set " + "state is %s\n", + fnic_ioreq_state_to_str(CMD_STATE(sc))); + } + if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED)) { + FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host, + "fnic_terminate_rport_io " + "IO not yet issued %p tag 0x%x flags " + "%x state %d\n", + sc, tag, CMD_FLAGS(sc), CMD_STATE(sc)); + } old_ioreq_state = CMD_STATE(sc); CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) { + abt_tag = (tag | FNIC_TAG_DEV_RST); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_terminate_rport_io dev rst sc 0x%p\n", sc); + } BUG_ON(io_req->abts_done); @@ -1203,7 +1525,7 @@ void fnic_terminate_rport_io(struct fc_rport *rport) /* Now queue the abort command to firmware */ int_to_scsilun(sc->device->lun, &fc_lun); - if (fnic_queue_abort_io_req(fnic, tag, + if (fnic_queue_abort_io_req(fnic, abt_tag, FCPIO_ITMF_ABT_TASK_TERM, fc_lun.scsi_lun, io_req)) { /* @@ -1212,12 +1534,17 @@ void fnic_terminate_rport_io(struct fc_rport *rport) * aborted later by scsi_eh, or cleaned up during * lun reset */ - io_lock = fnic_io_lock_hash(fnic, sc); - spin_lock_irqsave(io_lock, flags); if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) CMD_STATE(sc) = old_ioreq_state; spin_unlock_irqrestore(io_lock, flags); + } else { + spin_lock_irqsave(io_lock, flags); + if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) + CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED; + else + CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED; + spin_unlock_irqrestore(io_lock, flags); } } @@ -1232,13 +1559,15 @@ int fnic_abort_cmd(struct scsi_cmnd *sc) { struct fc_lport *lp; struct fnic *fnic; - struct fnic_io_req *io_req; + struct fnic_io_req *io_req = NULL; struct fc_rport *rport; spinlock_t *io_lock; unsigned long flags; + unsigned long start_time = 0; int ret = SUCCESS; - u32 task_req; + u32 task_req = 0; struct scsi_lun fc_lun; + int tag; DECLARE_COMPLETION_ONSTACK(tm_done); /* Wait for rport to unblock */ @@ -1249,9 +1578,13 @@ int fnic_abort_cmd(struct scsi_cmnd *sc) fnic = lport_priv(lp); rport = starget_to_rport(scsi_target(sc->device)); - FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, - "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n", - rport->port_id, sc->device->lun, sc->request->tag); + tag = sc->request->tag; + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %x flags %x\n", + rport->port_id, sc->device->lun, tag, CMD_FLAGS(sc)); + + CMD_FLAGS(sc) = FNIC_NO_FLAGS; if (lp->state != LPORT_ST_READY || !(lp->link_up)) { ret = FAILED; @@ -1318,6 +1651,10 @@ int fnic_abort_cmd(struct scsi_cmnd *sc) ret = FAILED; goto fnic_abort_cmd_end; } + if (task_req == FCPIO_ITMF_ABT_TASK) + CMD_FLAGS(sc) |= FNIC_IO_ABTS_ISSUED; + else + CMD_FLAGS(sc) |= FNIC_IO_TERM_ISSUED; /* * We queued an abort IO, wait for its completion. @@ -1336,6 +1673,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc) io_req = (struct fnic_io_req *)CMD_SP(sc); if (!io_req) { spin_unlock_irqrestore(io_lock, flags); + CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_REQ_NULL; ret = FAILED; goto fnic_abort_cmd_end; } @@ -1344,6 +1682,7 @@ int fnic_abort_cmd(struct scsi_cmnd *sc) /* fw did not complete abort, timed out */ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { spin_unlock_irqrestore(io_lock, flags); + CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_TIMED_OUT; ret = FAILED; goto fnic_abort_cmd_end; } @@ -1359,12 +1698,21 @@ int fnic_abort_cmd(struct scsi_cmnd *sc) spin_unlock_irqrestore(io_lock, flags); + start_time = io_req->start_time; fnic_release_ioreq_buf(fnic, io_req, sc); mempool_free(io_req, fnic->io_req_pool); fnic_abort_cmd_end: + FNIC_TRACE(fnic_abort_cmd, sc->device->host->host_no, + sc->request->tag, sc, + jiffies_to_msecs(jiffies - start_time), + 0, ((u64)sc->cmnd[0] << 32 | + (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 | + (u64)sc->cmnd[4] << 8 | sc->cmnd[5]), + (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc))); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, - "Returning from abort cmd %s\n", + "Returning from abort cmd type %x %s\n", task_req, (ret == SUCCESS) ? "SUCCESS" : "FAILED"); return ret; @@ -1375,16 +1723,28 @@ static inline int fnic_queue_dr_io_req(struct fnic *fnic, struct fnic_io_req *io_req) { struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + struct Scsi_Host *host = fnic->lport->host; struct scsi_lun fc_lun; int ret = 0; unsigned long intr_flags; + spin_lock_irqsave(host->host_lock, intr_flags); + if (unlikely(fnic_chk_state_flags_locked(fnic, + FNIC_FLAGS_IO_BLOCKED))) { + spin_unlock_irqrestore(host->host_lock, intr_flags); + return FAILED; + } else + atomic_inc(&fnic->in_flight); + spin_unlock_irqrestore(host->host_lock, intr_flags); + spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags); if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) free_wq_copy_descs(fnic, wq); if (!vnic_wq_copy_desc_avail(wq)) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "queue_dr_io_req failure - no descriptors\n"); ret = -EAGAIN; goto lr_io_req_end; } @@ -1399,6 +1759,7 @@ static inline int fnic_queue_dr_io_req(struct fnic *fnic, lr_io_req_end: spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + atomic_dec(&fnic->in_flight); return ret; } @@ -1412,7 +1773,7 @@ lr_io_req_end: static int fnic_clean_pending_aborts(struct fnic *fnic, struct scsi_cmnd *lr_sc) { - int tag; + int tag, abt_tag; struct fnic_io_req *io_req; spinlock_t *io_lock; unsigned long flags; @@ -1421,6 +1782,7 @@ static int fnic_clean_pending_aborts(struct fnic *fnic, struct scsi_lun fc_lun; struct scsi_device *lun_dev = lr_sc->device; DECLARE_COMPLETION_ONSTACK(tm_done); + enum fnic_ioreq_state old_ioreq_state; for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { sc = scsi_host_find_tag(fnic->lport->host, tag); @@ -1449,7 +1811,41 @@ static int fnic_clean_pending_aborts(struct fnic *fnic, "Found IO in %s on lun\n", fnic_ioreq_state_to_str(CMD_STATE(sc))); - BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING); + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) && + (!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) { + FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host, + "%s dev rst not pending sc 0x%p\n", __func__, + sc); + spin_unlock_irqrestore(io_lock, flags); + continue; + } + old_ioreq_state = CMD_STATE(sc); + /* + * Any pending IO issued prior to reset is expected to be + * in abts pending state, if not we need to set + * FNIC_IOREQ_ABTS_PENDING to indicate the IO is abort pending. + * When IO is completed, the IO will be handed over and + * handled in this function. + */ + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + + if (io_req->abts_done) + shost_printk(KERN_ERR, fnic->lport->host, + "%s: io_req->abts_done is set state is %s\n", + __func__, fnic_ioreq_state_to_str(CMD_STATE(sc))); + + BUG_ON(io_req->abts_done); + + abt_tag = tag; + if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) { + abt_tag |= FNIC_TAG_DEV_RST; + FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host, + "%s: dev rst sc 0x%p\n", __func__, sc); + } CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; io_req->abts_done = &tm_done; @@ -1458,17 +1854,25 @@ static int fnic_clean_pending_aborts(struct fnic *fnic, /* Now queue the abort command to firmware */ int_to_scsilun(sc->device->lun, &fc_lun); - if (fnic_queue_abort_io_req(fnic, tag, + if (fnic_queue_abort_io_req(fnic, abt_tag, FCPIO_ITMF_ABT_TASK_TERM, fc_lun.scsi_lun, io_req)) { spin_lock_irqsave(io_lock, flags); io_req = (struct fnic_io_req *)CMD_SP(sc); if (io_req) io_req->abts_done = NULL; + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) + CMD_STATE(sc) = old_ioreq_state; spin_unlock_irqrestore(io_lock, flags); ret = 1; goto clean_pending_aborts_end; + } else { + spin_lock_irqsave(io_lock, flags); + if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) + CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED; + spin_unlock_irqrestore(io_lock, flags); } + CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED; wait_for_completion_timeout(&tm_done, msecs_to_jiffies @@ -1479,8 +1883,8 @@ static int fnic_clean_pending_aborts(struct fnic *fnic, io_req = (struct fnic_io_req *)CMD_SP(sc); if (!io_req) { spin_unlock_irqrestore(io_lock, flags); - ret = 1; - goto clean_pending_aborts_end; + CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_REQ_NULL; + continue; } io_req->abts_done = NULL; @@ -1488,6 +1892,7 @@ static int fnic_clean_pending_aborts(struct fnic *fnic, /* if abort is still pending with fw, fail */ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { spin_unlock_irqrestore(io_lock, flags); + CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE; ret = 1; goto clean_pending_aborts_end; } @@ -1498,10 +1903,75 @@ static int fnic_clean_pending_aborts(struct fnic *fnic, mempool_free(io_req, fnic->io_req_pool); } + schedule_timeout(msecs_to_jiffies(2 * fnic->config.ed_tov)); + + /* walk again to check, if IOs are still pending in fw */ + if (fnic_is_abts_pending(fnic, lr_sc)) + ret = FAILED; + clean_pending_aborts_end: return ret; } +/** + * fnic_scsi_host_start_tag + * Allocates tagid from host's tag list + **/ +static inline int +fnic_scsi_host_start_tag(struct fnic *fnic, struct scsi_cmnd *sc) +{ + struct blk_queue_tag *bqt = fnic->lport->host->bqt; + int tag, ret = SCSI_NO_TAG; + + BUG_ON(!bqt); + if (!bqt) { + pr_err("Tags are not supported\n"); + goto end; + } + + do { + tag = find_next_zero_bit(bqt->tag_map, bqt->max_depth, 1); + if (tag >= bqt->max_depth) { + pr_err("Tag allocation failure\n"); + goto end; + } + } while (test_and_set_bit(tag, bqt->tag_map)); + + bqt->tag_index[tag] = sc->request; + sc->request->tag = tag; + sc->tag = tag; + if (!sc->request->special) + sc->request->special = sc; + + ret = tag; + +end: + return ret; +} + +/** + * fnic_scsi_host_end_tag + * frees tag allocated by fnic_scsi_host_start_tag. + **/ +static inline void +fnic_scsi_host_end_tag(struct fnic *fnic, struct scsi_cmnd *sc) +{ + struct blk_queue_tag *bqt = fnic->lport->host->bqt; + int tag = sc->request->tag; + + if (tag == SCSI_NO_TAG) + return; + + BUG_ON(!bqt || !bqt->tag_index[tag]); + if (!bqt) + return; + + bqt->tag_index[tag] = NULL; + clear_bit(tag, bqt->tag_map); + + return; +} + /* * SCSI Eh thread issues a Lun Reset when one or more commands on a LUN * fail to get aborted. It calls driver's eh_device_reset with a SCSI command @@ -1511,13 +1981,17 @@ int fnic_device_reset(struct scsi_cmnd *sc) { struct fc_lport *lp; struct fnic *fnic; - struct fnic_io_req *io_req; + struct fnic_io_req *io_req = NULL; struct fc_rport *rport; int status; int ret = FAILED; spinlock_t *io_lock; unsigned long flags; + unsigned long start_time = 0; + struct scsi_lun fc_lun; + int tag = 0; DECLARE_COMPLETION_ONSTACK(tm_done); + int tag_gen_flag = 0; /*to track tags allocated by fnic driver*/ /* Wait for rport to unblock */ fc_block_scsi_eh(sc); @@ -1529,8 +2003,8 @@ int fnic_device_reset(struct scsi_cmnd *sc) rport = starget_to_rport(scsi_target(sc->device)); FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, - "Device reset called FCID 0x%x, LUN 0x%x\n", - rport->port_id, sc->device->lun); + "Device reset called FCID 0x%x, LUN 0x%x sc 0x%p\n", + rport->port_id, sc->device->lun, sc); if (lp->state != LPORT_ST_READY || !(lp->link_up)) goto fnic_device_reset_end; @@ -1539,6 +2013,16 @@ int fnic_device_reset(struct scsi_cmnd *sc) if (fc_remote_port_chkready(rport)) goto fnic_device_reset_end; + CMD_FLAGS(sc) = FNIC_DEVICE_RESET; + /* Allocate tag if not present */ + + tag = sc->request->tag; + if (unlikely(tag < 0)) { + tag = fnic_scsi_host_start_tag(fnic, sc); + if (unlikely(tag == SCSI_NO_TAG)) + goto fnic_device_reset_end; + tag_gen_flag = 1; + } io_lock = fnic_io_lock_hash(fnic, sc); spin_lock_irqsave(io_lock, flags); io_req = (struct fnic_io_req *)CMD_SP(sc); @@ -1562,8 +2046,7 @@ int fnic_device_reset(struct scsi_cmnd *sc) CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE; spin_unlock_irqrestore(io_lock, flags); - FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n", - sc->request->tag); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %x\n", tag); /* * issue the device reset, if enqueue failed, clean up the ioreq @@ -1576,6 +2059,9 @@ int fnic_device_reset(struct scsi_cmnd *sc) io_req->dr_done = NULL; goto fnic_device_reset_clean; } + spin_lock_irqsave(io_lock, flags); + CMD_FLAGS(sc) |= FNIC_DEV_RST_ISSUED; + spin_unlock_irqrestore(io_lock, flags); /* * Wait on the local completion for LUN reset. The io_req may be @@ -1588,12 +2074,13 @@ int fnic_device_reset(struct scsi_cmnd *sc) io_req = (struct fnic_io_req *)CMD_SP(sc); if (!io_req) { spin_unlock_irqrestore(io_lock, flags); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "io_req is null tag 0x%x sc 0x%p\n", tag, sc); goto fnic_device_reset_end; } io_req->dr_done = NULL; status = CMD_LR_STATUS(sc); - spin_unlock_irqrestore(io_lock, flags); /* * If lun reset not completed, bail out with failed. io_req @@ -1602,7 +2089,53 @@ int fnic_device_reset(struct scsi_cmnd *sc) if (status == FCPIO_INVALID_CODE) { FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "Device reset timed out\n"); - goto fnic_device_reset_end; + CMD_FLAGS(sc) |= FNIC_DEV_RST_TIMED_OUT; + spin_unlock_irqrestore(io_lock, flags); + int_to_scsilun(sc->device->lun, &fc_lun); + /* + * Issue abort and terminate on the device reset request. + * If q'ing of the abort fails, retry issue it after a delay. + */ + while (1) { + spin_lock_irqsave(io_lock, flags); + if (CMD_FLAGS(sc) & FNIC_DEV_RST_TERM_ISSUED) { + spin_unlock_irqrestore(io_lock, flags); + break; + } + spin_unlock_irqrestore(io_lock, flags); + if (fnic_queue_abort_io_req(fnic, + tag | FNIC_TAG_DEV_RST, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies(FNIC_ABT_TERM_DELAY_TIMEOUT)); + } else { + spin_lock_irqsave(io_lock, flags); + CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED; + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + io_req->abts_done = &tm_done; + spin_unlock_irqrestore(io_lock, flags); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Abort and terminate issued on Device reset " + "tag 0x%x sc 0x%p\n", tag, sc); + break; + } + } + while (1) { + spin_lock_irqsave(io_lock, flags); + if (!(CMD_FLAGS(sc) & FNIC_DEV_RST_DONE)) { + spin_unlock_irqrestore(io_lock, flags); + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT)); + break; + } else { + io_req = (struct fnic_io_req *)CMD_SP(sc); + io_req->abts_done = NULL; + goto fnic_device_reset_clean; + } + } + } else { + spin_unlock_irqrestore(io_lock, flags); } /* Completed, but not successful, clean up the io_req, return fail */ @@ -1645,11 +2178,24 @@ fnic_device_reset_clean: spin_unlock_irqrestore(io_lock, flags); if (io_req) { + start_time = io_req->start_time; fnic_release_ioreq_buf(fnic, io_req, sc); mempool_free(io_req, fnic->io_req_pool); } fnic_device_reset_end: + FNIC_TRACE(fnic_device_reset, sc->device->host->host_no, + sc->request->tag, sc, + jiffies_to_msecs(jiffies - start_time), + 0, ((u64)sc->cmnd[0] << 32 | + (u64)sc->cmnd[2] << 24 | (u64)sc->cmnd[3] << 16 | + (u64)sc->cmnd[4] << 8 | sc->cmnd[5]), + (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc))); + + /* free tag if it is allocated */ + if (unlikely(tag_gen_flag)) + fnic_scsi_host_end_tag(fnic, sc); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "Returning from device reset %s\n", (ret == SUCCESS) ? @@ -1735,7 +2281,15 @@ void fnic_scsi_abort_io(struct fc_lport *lp) DECLARE_COMPLETION_ONSTACK(remove_wait); /* Issue firmware reset for fnic, wait for reset to complete */ +retry_fw_reset: spin_lock_irqsave(&fnic->fnic_lock, flags); + if (unlikely(fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)) { + /* fw reset is in progress, poll for its completion */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + schedule_timeout(msecs_to_jiffies(100)); + goto retry_fw_reset; + } + fnic->remove_wait = &remove_wait; old_state = fnic->state; fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; @@ -1776,7 +2330,14 @@ void fnic_scsi_cleanup(struct fc_lport *lp) struct fnic *fnic = lport_priv(lp); /* issue fw reset */ +retry_fw_reset: spin_lock_irqsave(&fnic->fnic_lock, flags); + if (unlikely(fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)) { + /* fw reset is in progress, poll for its completion */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + schedule_timeout(msecs_to_jiffies(100)); + goto retry_fw_reset; + } old_state = fnic->state; fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; fnic_update_mac_locked(fnic, fnic->ctlr.ctl_src_addr); @@ -1822,3 +2383,61 @@ call_fc_exch_mgr_reset: fc_exch_mgr_reset(lp, sid, did); } + +/* + * fnic_is_abts_pending() is a helper function that + * walks through tag map to check if there is any IOs pending,if there is one, + * then it returns 1 (true), otherwise 0 (false) + * if @lr_sc is non NULL, then it checks IOs specific to particular LUN, + * otherwise, it checks for all IOs. + */ +int fnic_is_abts_pending(struct fnic *fnic, struct scsi_cmnd *lr_sc) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + int ret = 0; + struct scsi_cmnd *sc; + struct scsi_device *lun_dev = NULL; + + if (lr_sc) + lun_dev = lr_sc->device; + + /* walk again to check, if IOs are still pending in fw */ + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + /* + * ignore this lun reset cmd or cmds that do not belong to + * this lun + */ + if (!sc || (lr_sc && (sc->device != lun_dev || sc == lr_sc))) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || sc->device != lun_dev) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to the LUN that we are resetting + */ + FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host, + "Found IO in %s on lun\n", + fnic_ioreq_state_to_str(CMD_STATE(sc))); + + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + continue; + } + } + + return ret; +} diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c new file mode 100644 index 0000000..23a60e3 --- /dev/null +++ b/drivers/scsi/fnic/fnic_trace.c @@ -0,0 +1,273 @@ +/* + * Copyright 2012 Cisco Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic.h" + +unsigned int trace_max_pages; +static int fnic_max_trace_entries; + +static unsigned long fnic_trace_buf_p; +static DEFINE_SPINLOCK(fnic_trace_lock); + +static fnic_trace_dbg_t fnic_trace_entries; +int fnic_tracing_enabled = 1; + +/* + * fnic_trace_get_buf - Give buffer pointer to user to fill up trace information + * + * Description: + * This routine gets next available trace buffer entry location @wr_idx + * from allocated trace buffer pages and give that memory location + * to user to store the trace information. + * + * Return Value: + * This routine returns pointer to next available trace entry + * @fnic_buf_head for user to fill trace information. + */ +fnic_trace_data_t *fnic_trace_get_buf(void) +{ + unsigned long fnic_buf_head; + unsigned long flags; + + spin_lock_irqsave(&fnic_trace_lock, flags); + + /* + * Get next available memory location for writing trace information + * at @wr_idx and increment @wr_idx + */ + fnic_buf_head = + fnic_trace_entries.page_offset[fnic_trace_entries.wr_idx]; + fnic_trace_entries.wr_idx++; + + /* + * Verify if trace buffer is full then change wd_idx to + * start from zero + */ + if (fnic_trace_entries.wr_idx >= fnic_max_trace_entries) + fnic_trace_entries.wr_idx = 0; + + /* + * Verify if write index @wr_idx and read index @rd_idx are same then + * increment @rd_idx to move to next entry in trace buffer + */ + if (fnic_trace_entries.wr_idx == fnic_trace_entries.rd_idx) { + fnic_trace_entries.rd_idx++; + if (fnic_trace_entries.rd_idx >= fnic_max_trace_entries) + fnic_trace_entries.rd_idx = 0; + } + spin_unlock_irqrestore(&fnic_trace_lock, flags); + return (fnic_trace_data_t *)fnic_buf_head; +} + +/* + * fnic_get_trace_data - Copy trace buffer to a memory file + * @fnic_dbgfs_t: pointer to debugfs trace buffer + * + * Description: + * This routine gathers the fnic trace debugfs data from the fnic_trace_data_t + * buffer and dumps it to fnic_dbgfs_t. It will start at the rd_idx entry in + * the log and process the log until the end of the buffer. Then it will gather + * from the beginning of the log and process until the current entry @wr_idx. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into fnic_dbgfs_t + */ +int fnic_get_trace_data(fnic_dbgfs_t *fnic_dbgfs_prt) +{ + int rd_idx; + int wr_idx; + int len = 0; + unsigned long flags; + char str[KSYM_SYMBOL_LEN]; + struct timespec val; + fnic_trace_data_t *tbp; + + spin_lock_irqsave(&fnic_trace_lock, flags); + rd_idx = fnic_trace_entries.rd_idx; + wr_idx = fnic_trace_entries.wr_idx; + if (wr_idx < rd_idx) { + while (1) { + /* Start from read index @rd_idx */ + tbp = (fnic_trace_data_t *) + fnic_trace_entries.page_offset[rd_idx]; + if (!tbp) { + spin_unlock_irqrestore(&fnic_trace_lock, flags); + return 0; + } + /* Convert function pointer to function name */ + if (sizeof(unsigned long) < 8) { + sprint_symbol(str, tbp->fnaddr.low); + jiffies_to_timespec(tbp->timestamp.low, &val); + } else { + sprint_symbol(str, tbp->fnaddr.val); + jiffies_to_timespec(tbp->timestamp.val, &val); + } + /* + * Dump trace buffer entry to memory file + * and increment read index @rd_idx + */ + len += snprintf(fnic_dbgfs_prt->buffer + len, + (trace_max_pages * PAGE_SIZE * 3) - len, + "%16lu.%16lu %-50s %8x %8x %16llx %16llx " + "%16llx %16llx %16llx\n", val.tv_sec, + val.tv_nsec, str, tbp->host_no, tbp->tag, + tbp->data[0], tbp->data[1], tbp->data[2], + tbp->data[3], tbp->data[4]); + rd_idx++; + /* + * If rd_idx is reached to maximum trace entries + * then move rd_idx to zero + */ + if (rd_idx > (fnic_max_trace_entries-1)) + rd_idx = 0; + /* + * Continure dumpping trace buffer entries into + * memory file till rd_idx reaches write index + */ + if (rd_idx == wr_idx) + break; + } + } else if (wr_idx > rd_idx) { + while (1) { + /* Start from read index @rd_idx */ + tbp = (fnic_trace_data_t *) + fnic_trace_entries.page_offset[rd_idx]; + if (!tbp) { + spin_unlock_irqrestore(&fnic_trace_lock, flags); + return 0; + } + /* Convert function pointer to function name */ + if (sizeof(unsigned long) < 8) { + sprint_symbol(str, tbp->fnaddr.low); + jiffies_to_timespec(tbp->timestamp.low, &val); + } else { + sprint_symbol(str, tbp->fnaddr.val); + jiffies_to_timespec(tbp->timestamp.val, &val); + } + /* + * Dump trace buffer entry to memory file + * and increment read index @rd_idx + */ + len += snprintf(fnic_dbgfs_prt->buffer + len, + (trace_max_pages * PAGE_SIZE * 3) - len, + "%16lu.%16lu %-50s %8x %8x %16llx %16llx " + "%16llx %16llx %16llx\n", val.tv_sec, + val.tv_nsec, str, tbp->host_no, tbp->tag, + tbp->data[0], tbp->data[1], tbp->data[2], + tbp->data[3], tbp->data[4]); + rd_idx++; + /* + * Continue dumpping trace buffer entries into + * memory file till rd_idx reaches write index + */ + if (rd_idx == wr_idx) + break; + } + } + spin_unlock_irqrestore(&fnic_trace_lock, flags); + return len; +} + +/* + * fnic_trace_buf_init - Initialize fnic trace buffer logging facility + * + * Description: + * Initialize trace buffer data structure by allocating required memory and + * setting page_offset information for every trace entry by adding trace entry + * length to previous page_offset value. + */ +int fnic_trace_buf_init(void) +{ + unsigned long fnic_buf_head; + int i; + int err = 0; + + trace_max_pages = fnic_trace_max_pages; + fnic_max_trace_entries = (trace_max_pages * PAGE_SIZE)/ + FNIC_ENTRY_SIZE_BYTES; + + fnic_trace_buf_p = (unsigned long)vmalloc((trace_max_pages * PAGE_SIZE)); + if (!fnic_trace_buf_p) { + printk(KERN_ERR PFX "Failed to allocate memory " + "for fnic_trace_buf_p\n"); + err = -ENOMEM; + goto err_fnic_trace_buf_init; + } + memset((void *)fnic_trace_buf_p, 0, (trace_max_pages * PAGE_SIZE)); + + fnic_trace_entries.page_offset = vmalloc(fnic_max_trace_entries * + sizeof(unsigned long)); + if (!fnic_trace_entries.page_offset) { + printk(KERN_ERR PFX "Failed to allocate memory for" + " page_offset\n"); + if (fnic_trace_buf_p) { + vfree((void *)fnic_trace_buf_p); + fnic_trace_buf_p = 0; + } + err = -ENOMEM; + goto err_fnic_trace_buf_init; + } + memset((void *)fnic_trace_entries.page_offset, 0, + (fnic_max_trace_entries * sizeof(unsigned long))); + fnic_trace_entries.wr_idx = fnic_trace_entries.rd_idx = 0; + fnic_buf_head = fnic_trace_buf_p; + + /* + * Set page_offset field of fnic_trace_entries struct by + * calculating memory location for every trace entry using + * length of each trace entry + */ + for (i = 0; i < fnic_max_trace_entries; i++) { + fnic_trace_entries.page_offset[i] = fnic_buf_head; + fnic_buf_head += FNIC_ENTRY_SIZE_BYTES; + } + err = fnic_trace_debugfs_init(); + if (err < 0) { + printk(KERN_ERR PFX "Failed to initialize debugfs for tracing\n"); + goto err_fnic_trace_debugfs_init; + } + printk(KERN_INFO PFX "Successfully Initialized Trace Buffer\n"); + return err; +err_fnic_trace_debugfs_init: + fnic_trace_free(); +err_fnic_trace_buf_init: + return err; +} + +/* + * fnic_trace_free - Free memory of fnic trace data structures. + */ +void fnic_trace_free(void) +{ + fnic_tracing_enabled = 0; + fnic_trace_debugfs_terminate(); + if (fnic_trace_entries.page_offset) { + vfree((void *)fnic_trace_entries.page_offset); + fnic_trace_entries.page_offset = NULL; + } + if (fnic_trace_buf_p) { + vfree((void *)fnic_trace_buf_p); + fnic_trace_buf_p = 0; + } + printk(KERN_INFO PFX "Successfully Freed Trace Buffer\n"); +} diff --git a/drivers/scsi/fnic/fnic_trace.h b/drivers/scsi/fnic/fnic_trace.h new file mode 100644 index 0000000..cef42b4 --- /dev/null +++ b/drivers/scsi/fnic/fnic_trace.h @@ -0,0 +1,90 @@ +/* + * Copyright 2012 Cisco Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __FNIC_TRACE_H__ +#define __FNIC_TRACE_H__ + +#define FNIC_ENTRY_SIZE_BYTES 64 + +extern ssize_t simple_read_from_buffer(void __user *to, + size_t count, + loff_t *ppos, + const void *from, + size_t available); + +extern unsigned int fnic_trace_max_pages; +extern int fnic_tracing_enabled; +extern unsigned int trace_max_pages; + +typedef struct fnic_trace_dbg { + int wr_idx; + int rd_idx; + unsigned long *page_offset; +} fnic_trace_dbg_t; + +typedef struct fnic_dbgfs { + int buffer_len; + char *buffer; +} fnic_dbgfs_t; + +struct fnic_trace_data { + union { + struct { + u32 low; + u32 high; + }; + u64 val; + } timestamp, fnaddr; + u32 host_no; + u32 tag; + u64 data[5]; +} __attribute__((__packed__)); + +typedef struct fnic_trace_data fnic_trace_data_t; + +#define FNIC_TRACE_ENTRY_SIZE \ + (FNIC_ENTRY_SIZE_BYTES - sizeof(fnic_trace_data_t)) + +#define FNIC_TRACE(_fn, _hn, _t, _a, _b, _c, _d, _e) \ + if (unlikely(fnic_tracing_enabled)) { \ + fnic_trace_data_t *trace_buf = fnic_trace_get_buf(); \ + if (trace_buf) { \ + if (sizeof(unsigned long) < 8) { \ + trace_buf->timestamp.low = jiffies; \ + trace_buf->fnaddr.low = (u32)(unsigned long)_fn; \ + } else { \ + trace_buf->timestamp.val = jiffies; \ + trace_buf->fnaddr.val = (u64)(unsigned long)_fn; \ + } \ + trace_buf->host_no = _hn; \ + trace_buf->tag = _t; \ + trace_buf->data[0] = (u64)(unsigned long)_a; \ + trace_buf->data[1] = (u64)(unsigned long)_b; \ + trace_buf->data[2] = (u64)(unsigned long)_c; \ + trace_buf->data[3] = (u64)(unsigned long)_d; \ + trace_buf->data[4] = (u64)(unsigned long)_e; \ + } \ + } + +fnic_trace_data_t *fnic_trace_get_buf(void); +int fnic_get_trace_data(fnic_dbgfs_t *); +int fnic_trace_buf_init(void); +void fnic_trace_free(void); +int fnic_trace_debugfs_init(void); +void fnic_trace_debugfs_terminate(void); + +#endif diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 4f33806..7f4f790 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -165,7 +165,7 @@ static void cmd_free(struct ctlr_info *h, struct CommandList *c); static void cmd_special_free(struct ctlr_info *h, struct CommandList *c); static struct CommandList *cmd_alloc(struct ctlr_info *h); static struct CommandList *cmd_special_alloc(struct ctlr_info *h); -static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, +static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, void *buff, size_t size, u8 page_code, unsigned char *scsi3addr, int cmd_type); @@ -1131,7 +1131,7 @@ clean: return -ENOMEM; } -static void hpsa_map_sg_chain_block(struct ctlr_info *h, +static int hpsa_map_sg_chain_block(struct ctlr_info *h, struct CommandList *c) { struct SGDescriptor *chain_sg, *chain_block; @@ -1144,8 +1144,15 @@ static void hpsa_map_sg_chain_block(struct ctlr_info *h, (c->Header.SGTotal - h->max_cmd_sg_entries); temp64 = pci_map_single(h->pdev, chain_block, chain_sg->Len, PCI_DMA_TODEVICE); + if (dma_mapping_error(&h->pdev->dev, temp64)) { + /* prevent subsequent unmapping */ + chain_sg->Addr.lower = 0; + chain_sg->Addr.upper = 0; + return -1; + } chain_sg->Addr.lower = (u32) (temp64 & 0x0FFFFFFFFULL); chain_sg->Addr.upper = (u32) ((temp64 >> 32) & 0x0FFFFFFFFULL); + return 0; } static void hpsa_unmap_sg_chain_block(struct ctlr_info *h, @@ -1390,7 +1397,7 @@ static void hpsa_pci_unmap(struct pci_dev *pdev, } } -static void hpsa_map_one(struct pci_dev *pdev, +static int hpsa_map_one(struct pci_dev *pdev, struct CommandList *cp, unsigned char *buf, size_t buflen, @@ -1401,10 +1408,16 @@ static void hpsa_map_one(struct pci_dev *pdev, if (buflen == 0 || data_direction == PCI_DMA_NONE) { cp->Header.SGList = 0; cp->Header.SGTotal = 0; - return; + return 0; } addr64 = (u64) pci_map_single(pdev, buf, buflen, data_direction); + if (dma_mapping_error(&pdev->dev, addr64)) { + /* Prevent subsequent unmap of something never mapped */ + cp->Header.SGList = 0; + cp->Header.SGTotal = 0; + return -1; + } cp->SG[0].Addr.lower = (u32) (addr64 & (u64) 0x00000000FFFFFFFF); cp->SG[0].Addr.upper = @@ -1412,6 +1425,7 @@ static void hpsa_map_one(struct pci_dev *pdev, cp->SG[0].Len = buflen; cp->Header.SGList = (u8) 1; /* no. SGs contig in this cmd */ cp->Header.SGTotal = (u16) 1; /* total sgs in this cmd list */ + return 0; } static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, @@ -1540,13 +1554,18 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, return -ENOMEM; } - fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD); + if (fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, + page, scsi3addr, TYPE_CMD)) { + rc = -1; + goto out; + } hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); ei = c->err_info; if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { hpsa_scsi_interpret_error(c); rc = -1; } +out: cmd_special_free(h, c); return rc; } @@ -1564,7 +1583,9 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr) return -ENOMEM; } - fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG); + /* fill_cmd can't fail here, no data buffer to map. */ + (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, + NULL, 0, 0, scsi3addr, TYPE_MSG); hpsa_scsi_do_simple_cmd_core(h, c); /* no unmap needed here because no data xfer. */ @@ -1631,8 +1652,11 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, } /* address the controller */ memset(scsi3addr, 0, sizeof(scsi3addr)); - fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, - buf, bufsize, 0, scsi3addr, TYPE_CMD); + if (fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, + buf, bufsize, 0, scsi3addr, TYPE_CMD)) { + rc = -1; + goto out; + } if (extended_response) c->Request.CDB[1] = extended_response; hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); @@ -1642,6 +1666,7 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, hpsa_scsi_interpret_error(c); rc = -1; } +out: cmd_special_free(h, c); return rc; } @@ -2105,7 +2130,10 @@ static int hpsa_scatter_gather(struct ctlr_info *h, if (chained) { cp->Header.SGList = h->max_cmd_sg_entries; cp->Header.SGTotal = (u16) (use_sg + 1); - hpsa_map_sg_chain_block(h, cp); + if (hpsa_map_sg_chain_block(h, cp)) { + scsi_dma_unmap(cmd); + return -1; + } return 0; } @@ -2353,8 +2381,9 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h, if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS) waittime = waittime * 2; - /* Send the Test Unit Ready */ - fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD); + /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */ + (void) fill_cmd(c, TEST_UNIT_READY, h, + NULL, 0, 0, lunaddr, TYPE_CMD); hpsa_scsi_do_simple_cmd_core(h, c); /* no unmap needed here because no data xfer. */ @@ -2439,7 +2468,9 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr, return -ENOMEM; } - fill_cmd(c, HPSA_ABORT_MSG, h, abort, 0, 0, scsi3addr, TYPE_MSG); + /* fill_cmd can't fail here, no buffer to map */ + (void) fill_cmd(c, HPSA_ABORT_MSG, h, abort, + 0, 0, scsi3addr, TYPE_MSG); if (swizzle) swizzle_abort_tag(&c->Request.CDB[4]); hpsa_scsi_do_simple_cmd_core(h, c); @@ -2928,6 +2959,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) struct CommandList *c; char *buff = NULL; union u64bit temp64; + int rc = 0; if (!argp) return -EINVAL; @@ -2947,8 +2979,8 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) /* Copy the data into the buffer we created */ if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { - kfree(buff); - return -EFAULT; + rc = -EFAULT; + goto out_kfree; } } else { memset(buff, 0, iocommand.buf_size); @@ -2956,8 +2988,8 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) } c = cmd_special_alloc(h); if (c == NULL) { - kfree(buff); - return -ENOMEM; + rc = -ENOMEM; + goto out_kfree; } /* Fill in the command type */ c->cmd_type = CMD_IOCTL_PEND; @@ -2982,6 +3014,13 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) if (iocommand.buf_size > 0) { temp64.val = pci_map_single(h->pdev, buff, iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); + if (dma_mapping_error(&h->pdev->dev, temp64.val)) { + c->SG[0].Addr.lower = 0; + c->SG[0].Addr.upper = 0; + c->SG[0].Len = 0; + rc = -ENOMEM; + goto out; + } c->SG[0].Addr.lower = temp64.val32.lower; c->SG[0].Addr.upper = temp64.val32.upper; c->SG[0].Len = iocommand.buf_size; @@ -2996,22 +3035,22 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) memcpy(&iocommand.error_info, c->err_info, sizeof(iocommand.error_info)); if (copy_to_user(argp, &iocommand, sizeof(iocommand))) { - kfree(buff); - cmd_special_free(h, c); - return -EFAULT; + rc = -EFAULT; + goto out; } if (iocommand.Request.Type.Direction == XFER_READ && iocommand.buf_size > 0) { /* Copy the data out of the buffer we created */ if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { - kfree(buff); - cmd_special_free(h, c); - return -EFAULT; + rc = -EFAULT; + goto out; } } - kfree(buff); +out: cmd_special_free(h, c); - return 0; +out_kfree: + kfree(buff); + return rc; } static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) @@ -3103,6 +3142,15 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) for (i = 0; i < sg_used; i++) { temp64.val = pci_map_single(h->pdev, buff[i], buff_size[i], PCI_DMA_BIDIRECTIONAL); + if (dma_mapping_error(&h->pdev->dev, temp64.val)) { + c->SG[i].Addr.lower = 0; + c->SG[i].Addr.upper = 0; + c->SG[i].Len = 0; + hpsa_pci_unmap(h->pdev, c, i, + PCI_DMA_BIDIRECTIONAL); + status = -ENOMEM; + goto cleanup1; + } c->SG[i].Addr.lower = temp64.val32.lower; c->SG[i].Addr.upper = temp64.val32.upper; c->SG[i].Len = buff_size[i]; @@ -3190,7 +3238,8 @@ static int hpsa_send_host_reset(struct ctlr_info *h, unsigned char *scsi3addr, c = cmd_alloc(h); if (!c) return -ENOMEM; - fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, + /* fill_cmd can't fail here, no data buffer to map */ + (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, RAID_CTLR_LUNID, TYPE_MSG); c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */ c->waiting = NULL; @@ -3202,7 +3251,7 @@ static int hpsa_send_host_reset(struct ctlr_info *h, unsigned char *scsi3addr, return 0; } -static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, +static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, void *buff, size_t size, u8 page_code, unsigned char *scsi3addr, int cmd_type) { @@ -3271,7 +3320,7 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, default: dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); BUG(); - return; + return -1; } } else if (cmd_type == TYPE_MSG) { switch (cmd) { @@ -3343,10 +3392,9 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, default: pci_dir = PCI_DMA_BIDIRECTIONAL; } - - hpsa_map_one(h->pdev, c, buff, size, pci_dir); - - return; + if (hpsa_map_one(h->pdev, c, buff, size, pci_dir)) + return -1; + return 0; } /* @@ -4882,10 +4930,13 @@ static void hpsa_flush_cache(struct ctlr_info *h) dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); goto out_of_memory; } - fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, - RAID_CTLR_LUNID, TYPE_CMD); + if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, + RAID_CTLR_LUNID, TYPE_CMD)) { + goto out; + } hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE); if (c->err_info->CommandStatus != 0) +out: dev_warn(&h->pdev->dev, "error flushing cache on controller\n"); cmd_special_free(h, c); diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 8fa79b8..f328089 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -6112,7 +6112,7 @@ static int ipr_queuecommand(struct Scsi_Host *shost, * We have told the host to stop giving us new requests, but * ERP ops don't count. FIXME */ - if (unlikely(!hrrq->allow_cmds && !hrrq->ioa_is_dead)) { + if (unlikely(!hrrq->allow_cmds && !hrrq->ioa_is_dead && !hrrq->removing_ioa)) { spin_unlock_irqrestore(hrrq->lock, hrrq_flags); return SCSI_MLQUEUE_HOST_BUSY; } @@ -6121,7 +6121,7 @@ static int ipr_queuecommand(struct Scsi_Host *shost, * FIXME - Create scsi_set_host_offline interface * and the ioa_is_dead check can be removed */ - if (unlikely(hrrq->ioa_is_dead || !res)) { + if (unlikely(hrrq->ioa_is_dead || hrrq->removing_ioa || !res)) { spin_unlock_irqrestore(hrrq->lock, hrrq_flags); goto err_nodev; } @@ -6741,14 +6741,17 @@ static int ipr_ioa_bringdown_done(struct ipr_cmnd *ipr_cmd) struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; ENTER; + if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) { + ipr_trace; + spin_unlock_irq(ioa_cfg->host->host_lock); + scsi_unblock_requests(ioa_cfg->host); + spin_lock_irq(ioa_cfg->host->host_lock); + } + ioa_cfg->in_reset_reload = 0; ioa_cfg->reset_retries = 0; list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); wake_up_all(&ioa_cfg->reset_wait_q); - - spin_unlock_irq(ioa_cfg->host->host_lock); - scsi_unblock_requests(ioa_cfg->host); - spin_lock_irq(ioa_cfg->host->host_lock); LEAVE; return IPR_RC_JOB_RETURN; @@ -8494,7 +8497,8 @@ static void _ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg, spin_unlock(&ioa_cfg->hrrq[i]._lock); } wmb(); - scsi_block_requests(ioa_cfg->host); + if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) + scsi_block_requests(ioa_cfg->host); ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); ioa_cfg->reset_cmd = ipr_cmd; @@ -8549,9 +8553,11 @@ static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg, ipr_fail_all_ops(ioa_cfg); wake_up_all(&ioa_cfg->reset_wait_q); - spin_unlock_irq(ioa_cfg->host->host_lock); - scsi_unblock_requests(ioa_cfg->host); - spin_lock_irq(ioa_cfg->host->host_lock); + if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) { + spin_unlock_irq(ioa_cfg->host->host_lock); + scsi_unblock_requests(ioa_cfg->host); + spin_lock_irq(ioa_cfg->host->host_lock); + } return; } else { ioa_cfg->in_ioa_bringdown = 1; @@ -9695,6 +9701,7 @@ static void __ipr_remove(struct pci_dev *pdev) { unsigned long host_lock_flags = 0; struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); + int i; ENTER; spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); @@ -9704,6 +9711,12 @@ static void __ipr_remove(struct pci_dev *pdev) spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); } + for (i = 0; i < ioa_cfg->hrrq_num; i++) { + spin_lock(&ioa_cfg->hrrq[i]._lock); + ioa_cfg->hrrq[i].removing_ioa = 1; + spin_unlock(&ioa_cfg->hrrq[i]._lock); + } + wmb(); ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL); spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index 1a9a246..21a6ff1 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -493,6 +493,7 @@ struct ipr_hrr_queue { u8 allow_interrupts:1; u8 ioa_is_dead:1; u8 allow_cmds:1; + u8 removing_ioa:1; struct blk_iopoll iopoll; }; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index fcb9d0b..09c81b2 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1381,10 +1381,10 @@ static void fc_fcp_timeout(unsigned long data) fsp->state |= FC_SRB_FCP_PROCESSING_TMO; - if (fsp->state & FC_SRB_RCV_STATUS) - fc_fcp_complete_locked(fsp); - else if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED) + if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED) fc_fcp_rec(fsp); + else if (fsp->state & FC_SRB_RCV_STATUS) + fc_fcp_complete_locked(fsp); else fc_fcp_recovery(fsp, FC_TIMED_OUT); fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO; diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h index c2830cc..b74189d 100644 --- a/drivers/scsi/libfc/fc_libfc.h +++ b/drivers/scsi/libfc/fc_libfc.h @@ -41,25 +41,25 @@ extern unsigned int fc_debug_logging; #define FC_LIBFC_DBG(fmt, args...) \ FC_CHECK_LOGGING(FC_LIBFC_LOGGING, \ - printk(KERN_INFO "libfc: " fmt, ##args)) + pr_info("libfc: " fmt, ##args)) #define FC_LPORT_DBG(lport, fmt, args...) \ FC_CHECK_LOGGING(FC_LPORT_LOGGING, \ - printk(KERN_INFO "host%u: lport %6.6x: " fmt, \ - (lport)->host->host_no, \ - (lport)->port_id, ##args)) + pr_info("host%u: lport %6.6x: " fmt, \ + (lport)->host->host_no, \ + (lport)->port_id, ##args)) -#define FC_DISC_DBG(disc, fmt, args...) \ - FC_CHECK_LOGGING(FC_DISC_LOGGING, \ - printk(KERN_INFO "host%u: disc: " fmt, \ - fc_disc_lport(disc)->host->host_no, \ - ##args)) +#define FC_DISC_DBG(disc, fmt, args...) \ + FC_CHECK_LOGGING(FC_DISC_LOGGING, \ + pr_info("host%u: disc: " fmt, \ + fc_disc_lport(disc)->host->host_no, \ + ##args)) #define FC_RPORT_ID_DBG(lport, port_id, fmt, args...) \ FC_CHECK_LOGGING(FC_RPORT_LOGGING, \ - printk(KERN_INFO "host%u: rport %6.6x: " fmt, \ - (lport)->host->host_no, \ - (port_id), ##args)) + pr_info("host%u: rport %6.6x: " fmt, \ + (lport)->host->host_no, \ + (port_id), ##args)) #define FC_RPORT_DBG(rdata, fmt, args...) \ FC_RPORT_ID_DBG((rdata)->local_port, (rdata)->ids.port_id, fmt, ##args) @@ -70,13 +70,13 @@ extern unsigned int fc_debug_logging; if ((pkt)->seq_ptr) { \ struct fc_exch *_ep = NULL; \ _ep = fc_seq_exch((pkt)->seq_ptr); \ - printk(KERN_INFO "host%u: fcp: %6.6x: " \ + pr_info("host%u: fcp: %6.6x: " \ "xid %04x-%04x: " fmt, \ (pkt)->lp->host->host_no, \ (pkt)->rport->port_id, \ (_ep)->oxid, (_ep)->rxid, ##args); \ } else { \ - printk(KERN_INFO "host%u: fcp: %6.6x: " fmt, \ + pr_info("host%u: fcp: %6.6x: " fmt, \ (pkt)->lp->host->host_no, \ (pkt)->rport->port_id, ##args); \ } \ @@ -84,14 +84,14 @@ extern unsigned int fc_debug_logging; #define FC_EXCH_DBG(exch, fmt, args...) \ FC_CHECK_LOGGING(FC_EXCH_LOGGING, \ - printk(KERN_INFO "host%u: xid %4x: " fmt, \ - (exch)->lp->host->host_no, \ - exch->xid, ##args)) + pr_info("host%u: xid %4x: " fmt, \ + (exch)->lp->host->host_no, \ + exch->xid, ##args)) #define FC_SCSI_DBG(lport, fmt, args...) \ FC_CHECK_LOGGING(FC_SCSI_LOGGING, \ - printk(KERN_INFO "host%u: scsi: " fmt, \ - (lport)->host->host_no, ##args)) + pr_info("host%u: scsi: " fmt, \ + (lport)->host->host_no, ##args)) /* * FC-4 Providers. diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 83aa1ef..d518d17 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -582,7 +582,7 @@ static void fc_rport_error(struct fc_rport_priv *rdata, struct fc_frame *fp) static void fc_rport_error_retry(struct fc_rport_priv *rdata, struct fc_frame *fp) { - unsigned long delay = FC_DEF_E_D_TOV; + unsigned long delay = msecs_to_jiffies(FC_DEF_E_D_TOV); /* make sure this isn't an FC_EX_CLOSED error, never retry those */ if (PTR_ERR(fp) == -FC_EX_CLOSED) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 55b6fc8..74b67d9 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -6644,7 +6644,7 @@ static int lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) { - MAILBOX_t *mb; + MAILBOX_t *mbx; struct lpfc_sli *psli = &phba->sli; uint32_t status, evtctr; uint32_t ha_copy, hc_copy; @@ -6698,7 +6698,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, psli = &phba->sli; - mb = &pmbox->u.mb; + mbx = &pmbox->u.mb; status = MBX_SUCCESS; if (phba->link_state == LPFC_HBA_ERROR) { @@ -6713,7 +6713,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, goto out_not_finished; } - if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT) { + if (mbx->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT) { if (lpfc_readl(phba->HCregaddr, &hc_copy) || !(hc_copy & HC_MBINT_ENA)) { spin_unlock_irqrestore(&phba->hbalock, drvr_flag); @@ -6767,7 +6767,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, "(%d):0308 Mbox cmd issue - BUSY Data: " "x%x x%x x%x x%x\n", pmbox->vport ? pmbox->vport->vpi : 0xffffff, - mb->mbxCommand, phba->pport->port_state, + mbx->mbxCommand, phba->pport->port_state, psli->sli_flag, flag); psli->slistat.mbox_busy++; @@ -6777,15 +6777,15 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, lpfc_debugfs_disc_trc(pmbox->vport, LPFC_DISC_TRC_MBOX_VPORT, "MBOX Bsy vport: cmd:x%x mb:x%x x%x", - (uint32_t)mb->mbxCommand, - mb->un.varWords[0], mb->un.varWords[1]); + (uint32_t)mbx->mbxCommand, + mbx->un.varWords[0], mbx->un.varWords[1]); } else { lpfc_debugfs_disc_trc(phba->pport, LPFC_DISC_TRC_MBOX, "MBOX Bsy: cmd:x%x mb:x%x x%x", - (uint32_t)mb->mbxCommand, - mb->un.varWords[0], mb->un.varWords[1]); + (uint32_t)mbx->mbxCommand, + mbx->un.varWords[0], mbx->un.varWords[1]); } return MBX_BUSY; @@ -6796,7 +6796,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, /* If we are not polling, we MUST be in SLI2 mode */ if (flag != MBX_POLL) { if (!(psli->sli_flag & LPFC_SLI_ACTIVE) && - (mb->mbxCommand != MBX_KILL_BOARD)) { + (mbx->mbxCommand != MBX_KILL_BOARD)) { psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; spin_unlock_irqrestore(&phba->hbalock, drvr_flag); /* Mbox command cannot issue */ @@ -6818,23 +6818,23 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, "(%d):0309 Mailbox cmd x%x issue Data: x%x x%x " "x%x\n", pmbox->vport ? pmbox->vport->vpi : 0, - mb->mbxCommand, phba->pport->port_state, + mbx->mbxCommand, phba->pport->port_state, psli->sli_flag, flag); - if (mb->mbxCommand != MBX_HEARTBEAT) { + if (mbx->mbxCommand != MBX_HEARTBEAT) { if (pmbox->vport) { lpfc_debugfs_disc_trc(pmbox->vport, LPFC_DISC_TRC_MBOX_VPORT, "MBOX Send vport: cmd:x%x mb:x%x x%x", - (uint32_t)mb->mbxCommand, - mb->un.varWords[0], mb->un.varWords[1]); + (uint32_t)mbx->mbxCommand, + mbx->un.varWords[0], mbx->un.varWords[1]); } else { lpfc_debugfs_disc_trc(phba->pport, LPFC_DISC_TRC_MBOX, "MBOX Send: cmd:x%x mb:x%x x%x", - (uint32_t)mb->mbxCommand, - mb->un.varWords[0], mb->un.varWords[1]); + (uint32_t)mbx->mbxCommand, + mbx->un.varWords[0], mbx->un.varWords[1]); } } @@ -6842,12 +6842,12 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, evtctr = psli->slistat.mbox_event; /* next set own bit for the adapter and copy over command word */ - mb->mbxOwner = OWN_CHIP; + mbx->mbxOwner = OWN_CHIP; if (psli->sli_flag & LPFC_SLI_ACTIVE) { /* Populate mbox extension offset word. */ if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len) { - *(((uint32_t *)mb) + pmbox->mbox_offset_word) + *(((uint32_t *)mbx) + pmbox->mbox_offset_word) = (uint8_t *)phba->mbox_ext - (uint8_t *)phba->mbox; } @@ -6859,11 +6859,11 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, pmbox->in_ext_byte_len); } /* Copy command data to host SLIM area */ - lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE); + lpfc_sli_pcimem_bcopy(mbx, phba->mbox, MAILBOX_CMD_SIZE); } else { /* Populate mbox extension offset word. */ if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len) - *(((uint32_t *)mb) + pmbox->mbox_offset_word) + *(((uint32_t *)mbx) + pmbox->mbox_offset_word) = MAILBOX_HBA_EXT_OFFSET; /* Copy the mailbox extension data */ @@ -6873,24 +6873,24 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, pmbox->context2, pmbox->in_ext_byte_len); } - if (mb->mbxCommand == MBX_CONFIG_PORT) { + if (mbx->mbxCommand == MBX_CONFIG_PORT) { /* copy command data into host mbox for cmpl */ - lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE); + lpfc_sli_pcimem_bcopy(mbx, phba->mbox, MAILBOX_CMD_SIZE); } /* First copy mbox command data to HBA SLIM, skip past first word */ to_slim = phba->MBslimaddr + sizeof (uint32_t); - lpfc_memcpy_to_slim(to_slim, &mb->un.varWords[0], + lpfc_memcpy_to_slim(to_slim, &mbx->un.varWords[0], MAILBOX_CMD_SIZE - sizeof (uint32_t)); /* Next copy over first word, with mbxOwner set */ - ldata = *((uint32_t *)mb); + ldata = *((uint32_t *)mbx); to_slim = phba->MBslimaddr; writel(ldata, to_slim); readl(to_slim); /* flush */ - if (mb->mbxCommand == MBX_CONFIG_PORT) { + if (mbx->mbxCommand == MBX_CONFIG_PORT) { /* switch over to host mailbox */ psli->sli_flag |= LPFC_SLI_ACTIVE; } @@ -6965,7 +6965,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, /* First copy command data */ word0 = *((uint32_t *)phba->mbox); word0 = le32_to_cpu(word0); - if (mb->mbxCommand == MBX_CONFIG_PORT) { + if (mbx->mbxCommand == MBX_CONFIG_PORT) { MAILBOX_t *slimmb; uint32_t slimword0; /* Check real SLIM for any errors */ @@ -6992,7 +6992,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, if (psli->sli_flag & LPFC_SLI_ACTIVE) { /* copy results back to user */ - lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE); + lpfc_sli_pcimem_bcopy(phba->mbox, mbx, MAILBOX_CMD_SIZE); /* Copy the mailbox extension data */ if (pmbox->out_ext_byte_len && pmbox->context2) { lpfc_sli_pcimem_bcopy(phba->mbox_ext, @@ -7001,7 +7001,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, } } else { /* First copy command data */ - lpfc_memcpy_from_slim(mb, phba->MBslimaddr, + lpfc_memcpy_from_slim(mbx, phba->MBslimaddr, MAILBOX_CMD_SIZE); /* Copy the mailbox extension data */ if (pmbox->out_ext_byte_len && pmbox->context2) { @@ -7016,7 +7016,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, readl(phba->HAregaddr); /* flush */ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; - status = mb->mbxStatus; + status = mbx->mbxStatus; } spin_unlock_irqrestore(&phba->hbalock, drvr_flag); diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 3b2365c..408d254 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -33,9 +33,9 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "06.504.01.00-rc1" -#define MEGASAS_RELDATE "Oct. 1, 2012" -#define MEGASAS_EXT_VERSION "Mon. Oct. 1 17:00:00 PDT 2012" +#define MEGASAS_VERSION "06.506.00.00-rc1" +#define MEGASAS_RELDATE "Feb. 9, 2013" +#define MEGASAS_EXT_VERSION "Sat. Feb. 9 17:00:00 PDT 2013" /* * Device IDs diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 66a0fec..9d53540 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -18,7 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * FILE: megaraid_sas_base.c - * Version : v06.504.01.00-rc1 + * Version : v06.506.00.00-rc1 * * Authors: LSI Corporation * Sreenivas Bagalkote diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 74030af..a7d5668 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -1206,7 +1206,7 @@ megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len, MPI2_SCSIIO_EEDPFLAGS_INSERT_OP; } io_request->Control |= (0x4 << 26); - io_request->EEDPBlockSize = MEGASAS_EEDPBLOCKSIZE; + io_request->EEDPBlockSize = scp->device->sector_size; } else { /* Some drives don't support 16/12 byte CDB's, convert to 10 */ if (((cdb_len == 12) || (cdb_len == 16)) && @@ -1511,7 +1511,8 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance, if (scmd->device->channel < MEGASAS_MAX_PD_CHANNELS && instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) { io_request->Function = 0; - io_request->DevHandle = + if (fusion->fast_path_io) + io_request->DevHandle = local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl; io_request->RaidContext.timeoutValue = local_map_ptr->raidMap.fpPdIoTimeoutSec; diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index a7c64f0..f68a3cd 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -61,7 +61,6 @@ #define MEGASAS_SCSI_ADDL_CDB_LEN 0x18 #define MEGASAS_RD_WR_PROTECT_CHECK_ALL 0x20 #define MEGASAS_RD_WR_PROTECT_CHECK_NONE 0x60 -#define MEGASAS_EEDPBLOCKSIZE 512 /* * Raid context flags diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 5e24e7e..bcb23d2 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -2023,6 +2023,14 @@ _base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc) printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, MPT2SAS_INTEL_RMS25KB040_BRANDING); break; + case MPT2SAS_INTEL_RMS25LB040_SSDID: + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS25LB040_BRANDING); + break; + case MPT2SAS_INTEL_RMS25LB080_SSDID: + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS25LB080_BRANDING); + break; default: break; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index c6ee7aa..4caaac1 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -165,6 +165,10 @@ "Intel(R) Integrated RAID Module RMS25KB080" #define MPT2SAS_INTEL_RMS25KB040_BRANDING \ "Intel(R) Integrated RAID Module RMS25KB040" +#define MPT2SAS_INTEL_RMS25LB040_BRANDING \ + "Intel(R) Integrated RAID Module RMS25LB040" +#define MPT2SAS_INTEL_RMS25LB080_BRANDING \ + "Intel(R) Integrated RAID Module RMS25LB080" #define MPT2SAS_INTEL_RMS2LL080_BRANDING \ "Intel Integrated RAID Module RMS2LL080" #define MPT2SAS_INTEL_RMS2LL040_BRANDING \ @@ -180,6 +184,8 @@ #define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517 #define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518 #define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519 +#define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A +#define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B #define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E #define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F #define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000 diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c index 078c639..532110f 100644 --- a/drivers/scsi/mvsas/mv_sas.c +++ b/drivers/scsi/mvsas/mv_sas.c @@ -316,10 +316,13 @@ static int mvs_task_prep_smp(struct mvs_info *mvi, struct mvs_task_exec_info *tei) { int elem, rc, i; + struct sas_ha_struct *sha = mvi->sas; struct sas_task *task = tei->task; struct mvs_cmd_hdr *hdr = tei->hdr; struct domain_device *dev = task->dev; struct asd_sas_port *sas_port = dev->port; + struct sas_phy *sphy = dev->phy; + struct asd_sas_phy *sas_phy = sha->sas_phy[sphy->number]; struct scatterlist *sg_req, *sg_resp; u32 req_len, resp_len, tag = tei->tag; void *buf_tmp; @@ -392,7 +395,7 @@ static int mvs_task_prep_smp(struct mvs_info *mvi, slot->tx = mvi->tx_prod; mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) | TXQ_MODE_I | tag | - (sas_port->phy_mask << TXQ_PHY_SHIFT)); + (MVS_PHY_ID << TXQ_PHY_SHIFT)); hdr->flags |= flags; hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4)); @@ -438,11 +441,14 @@ static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag) static int mvs_task_prep_ata(struct mvs_info *mvi, struct mvs_task_exec_info *tei) { + struct sas_ha_struct *sha = mvi->sas; struct sas_task *task = tei->task; struct domain_device *dev = task->dev; struct mvs_device *mvi_dev = dev->lldd_dev; struct mvs_cmd_hdr *hdr = tei->hdr; struct asd_sas_port *sas_port = dev->port; + struct sas_phy *sphy = dev->phy; + struct asd_sas_phy *sas_phy = sha->sas_phy[sphy->number]; struct mvs_slot_info *slot; void *buf_prd; u32 tag = tei->tag, hdr_tag; @@ -462,7 +468,7 @@ static int mvs_task_prep_ata(struct mvs_info *mvi, slot->tx = mvi->tx_prod; del_q = TXQ_MODE_I | tag | (TXQ_CMD_STP << TXQ_CMD_SHIFT) | - (sas_port->phy_mask << TXQ_PHY_SHIFT) | + (MVS_PHY_ID << TXQ_PHY_SHIFT) | (mvi_dev->taskfileset << TXQ_SRS_SHIFT); mvi->tx[mvi->tx_prod] = cpu_to_le32(del_q); diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h index 2ae77a0..9f3cc13 100644 --- a/drivers/scsi/mvsas/mv_sas.h +++ b/drivers/scsi/mvsas/mv_sas.h @@ -76,6 +76,7 @@ extern struct kmem_cache *mvs_task_list_cache; (__mc) != 0 ; \ (++__lseq), (__mc) >>= 1) +#define MVS_PHY_ID (1U << sas_phy->id) #define MV_INIT_DELAYED_WORK(w, f, d) INIT_DELAYED_WORK(w, f) #define UNASSOC_D2H_FIS(id) \ ((void *) mvi->rx_fis + 0x100 * id) diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index c06b8e5..d8293f2 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -144,6 +144,10 @@ static int _osd_get_print_system_info(struct osd_dev *od, odi->osdname_len = get_attrs[a].len; /* Avoid NULL for memcmp optimization 0-length is good enough */ odi->osdname = kzalloc(odi->osdname_len + 1, GFP_KERNEL); + if (!odi->osdname) { + ret = -ENOMEM; + goto out; + } if (odi->osdname_len) memcpy(odi->osdname, get_attrs[a].val_ptr, odi->osdname_len); OSD_INFO("OSD_NAME [%s]\n", odi->osdname); diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 4c9fe73..3d5e522 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -140,7 +140,8 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha) for (i = 0; i < USI_MAX_MEMCNT; i++) { if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) { pci_free_consistent(pm8001_ha->pdev, - pm8001_ha->memoryMap.region[i].element_size, + (pm8001_ha->memoryMap.region[i].total_len + + pm8001_ha->memoryMap.region[i].alignment), pm8001_ha->memoryMap.region[i].virt_ptr, pm8001_ha->memoryMap.region[i].phys_addr); } diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 83d7984..1d82eef 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -1272,22 +1272,29 @@ qla2x00_thermal_temp_show(struct device *dev, struct device_attribute *attr, char *buf) { scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); - int rval = QLA_FUNCTION_FAILED; - uint16_t temp, frac; + uint16_t temp = 0; - if (!vha->hw->flags.thermal_supported) - return snprintf(buf, PAGE_SIZE, "\n"); + if (!vha->hw->thermal_support) { + ql_log(ql_log_warn, vha, 0x70db, + "Thermal not supported by this card.\n"); + goto done; + } - temp = frac = 0; - if (qla2x00_reset_active(vha)) - ql_log(ql_log_warn, vha, 0x707b, - "ISP reset active.\n"); - else if (!vha->hw->flags.eeh_busy) - rval = qla2x00_get_thermal_temp(vha, &temp, &frac); - if (rval != QLA_SUCCESS) - return snprintf(buf, PAGE_SIZE, "\n"); + if (qla2x00_reset_active(vha)) { + ql_log(ql_log_warn, vha, 0x70dc, "ISP reset active.\n"); + goto done; + } + + if (vha->hw->flags.eeh_busy) { + ql_log(ql_log_warn, vha, 0x70dd, "PCI EEH busy.\n"); + goto done; + } + + if (qla2x00_get_thermal_temp(vha, &temp) == QLA_SUCCESS) + return snprintf(buf, PAGE_SIZE, "%d\n", temp); - return snprintf(buf, PAGE_SIZE, "%d.%02d\n", temp, frac); +done: + return snprintf(buf, PAGE_SIZE, "\n"); } static ssize_t diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 9f34ded..ad54099 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -27,7 +27,7 @@ void qla2x00_bsg_sp_free(void *data, void *ptr) { srb_t *sp = (srb_t *)ptr; - struct scsi_qla_host *vha = (scsi_qla_host_t *)data; + struct scsi_qla_host *vha = sp->fcport->vha; struct fc_bsg_job *bsg_job = sp->u.bsg_job; struct qla_hw_data *ha = vha->hw; @@ -40,7 +40,7 @@ qla2x00_bsg_sp_free(void *data, void *ptr) if (sp->type == SRB_CT_CMD || sp->type == SRB_ELS_CMD_HST) kfree(sp->fcport); - mempool_free(sp, vha->hw->srb_mempool); + qla2x00_rel_sp(vha, sp); } int @@ -368,7 +368,7 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) if (rval != QLA_SUCCESS) { ql_log(ql_log_warn, vha, 0x700e, "qla2x00_start_sp failed = %d\n", rval); - mempool_free(sp, ha->srb_mempool); + qla2x00_rel_sp(vha, sp); rval = -EIO; goto done_unmap_sg; } @@ -515,7 +515,7 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) if (rval != QLA_SUCCESS) { ql_log(ql_log_warn, vha, 0x7017, "qla2x00_start_sp failed=%d.\n", rval); - mempool_free(sp, ha->srb_mempool); + qla2x00_rel_sp(vha, sp); rval = -EIO; goto done_free_fcport; } @@ -531,6 +531,75 @@ done_unmap_sg: done: return rval; } + +/* Disable loopback mode */ +static inline int +qla81xx_reset_loopback_mode(scsi_qla_host_t *vha, uint16_t *config, + int wait, int wait2) +{ + int ret = 0; + int rval = 0; + uint16_t new_config[4]; + struct qla_hw_data *ha = vha->hw; + + if (!IS_QLA81XX(ha) && !IS_QLA8031(ha)) + goto done_reset_internal; + + memset(new_config, 0 , sizeof(new_config)); + if ((config[0] & INTERNAL_LOOPBACK_MASK) >> 1 == + ENABLE_INTERNAL_LOOPBACK || + (config[0] & INTERNAL_LOOPBACK_MASK) >> 1 == + ENABLE_EXTERNAL_LOOPBACK) { + new_config[0] = config[0] & ~INTERNAL_LOOPBACK_MASK; + ql_dbg(ql_dbg_user, vha, 0x70bf, "new_config[0]=%02x\n", + (new_config[0] & INTERNAL_LOOPBACK_MASK)); + memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ; + + ha->notify_dcbx_comp = wait; + ha->notify_lb_portup_comp = wait2; + + ret = qla81xx_set_port_config(vha, new_config); + if (ret != QLA_SUCCESS) { + ql_log(ql_log_warn, vha, 0x7025, + "Set port config failed.\n"); + ha->notify_dcbx_comp = 0; + ha->notify_lb_portup_comp = 0; + rval = -EINVAL; + goto done_reset_internal; + } + + /* Wait for DCBX complete event */ + if (wait && !wait_for_completion_timeout(&ha->dcbx_comp, + (DCBX_COMP_TIMEOUT * HZ))) { + ql_dbg(ql_dbg_user, vha, 0x7026, + "DCBX completion not received.\n"); + ha->notify_dcbx_comp = 0; + ha->notify_lb_portup_comp = 0; + rval = -EINVAL; + goto done_reset_internal; + } else + ql_dbg(ql_dbg_user, vha, 0x7027, + "DCBX completion received.\n"); + + if (wait2 && + !wait_for_completion_timeout(&ha->lb_portup_comp, + (LB_PORTUP_COMP_TIMEOUT * HZ))) { + ql_dbg(ql_dbg_user, vha, 0x70c5, + "Port up completion not received.\n"); + ha->notify_lb_portup_comp = 0; + rval = -EINVAL; + goto done_reset_internal; + } else + ql_dbg(ql_dbg_user, vha, 0x70c6, + "Port up completion received.\n"); + + ha->notify_dcbx_comp = 0; + ha->notify_lb_portup_comp = 0; + } +done_reset_internal: + return rval; +} + /* * Set the port configuration to enable the internal or external loopback * depending on the loopback mode. @@ -566,9 +635,19 @@ qla81xx_set_loopback_mode(scsi_qla_host_t *vha, uint16_t *config, } /* Wait for DCBX complete event */ - if (!wait_for_completion_timeout(&ha->dcbx_comp, (20 * HZ))) { + if (!wait_for_completion_timeout(&ha->dcbx_comp, + (DCBX_COMP_TIMEOUT * HZ))) { ql_dbg(ql_dbg_user, vha, 0x7022, - "State change notification not received.\n"); + "DCBX completion not received.\n"); + ret = qla81xx_reset_loopback_mode(vha, new_config, 0, 0); + /* + * If the reset of the loopback mode doesn't work take a FCoE + * dump and reset the chip. + */ + if (ret) { + ha->isp_ops->fw_dump(vha, 0); + set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + } rval = -EINVAL; } else { if (ha->flags.idc_compl_status) { @@ -578,7 +657,7 @@ qla81xx_set_loopback_mode(scsi_qla_host_t *vha, uint16_t *config, ha->flags.idc_compl_status = 0; } else ql_dbg(ql_dbg_user, vha, 0x7023, - "State change received.\n"); + "DCBX completion received.\n"); } ha->notify_dcbx_comp = 0; @@ -587,57 +666,6 @@ done_set_internal: return rval; } -/* Disable loopback mode */ -static inline int -qla81xx_reset_loopback_mode(scsi_qla_host_t *vha, uint16_t *config, - int wait) -{ - int ret = 0; - int rval = 0; - uint16_t new_config[4]; - struct qla_hw_data *ha = vha->hw; - - if (!IS_QLA81XX(ha) && !IS_QLA8031(ha)) - goto done_reset_internal; - - memset(new_config, 0 , sizeof(new_config)); - if ((config[0] & INTERNAL_LOOPBACK_MASK) >> 1 == - ENABLE_INTERNAL_LOOPBACK || - (config[0] & INTERNAL_LOOPBACK_MASK) >> 1 == - ENABLE_EXTERNAL_LOOPBACK) { - new_config[0] = config[0] & ~INTERNAL_LOOPBACK_MASK; - ql_dbg(ql_dbg_user, vha, 0x70bf, "new_config[0]=%02x\n", - (new_config[0] & INTERNAL_LOOPBACK_MASK)); - memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ; - - ha->notify_dcbx_comp = wait; - ret = qla81xx_set_port_config(vha, new_config); - if (ret != QLA_SUCCESS) { - ql_log(ql_log_warn, vha, 0x7025, - "Set port config failed.\n"); - ha->notify_dcbx_comp = 0; - rval = -EINVAL; - goto done_reset_internal; - } - - /* Wait for DCBX complete event */ - if (wait && !wait_for_completion_timeout(&ha->dcbx_comp, - (20 * HZ))) { - ql_dbg(ql_dbg_user, vha, 0x7026, - "State change notification not received.\n"); - ha->notify_dcbx_comp = 0; - rval = -EINVAL; - goto done_reset_internal; - } else - ql_dbg(ql_dbg_user, vha, 0x7027, - "State change received.\n"); - - ha->notify_dcbx_comp = 0; - } -done_reset_internal: - return rval; -} - static int qla2x00_process_loopback(struct fc_bsg_job *bsg_job) { @@ -739,6 +767,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) if (IS_QLA81XX(ha) || IS_QLA8031(ha)) { memset(config, 0, sizeof(config)); memset(new_config, 0, sizeof(new_config)); + if (qla81xx_get_port_config(vha, config)) { ql_log(ql_log_warn, vha, 0x701f, "Get port config failed.\n"); @@ -746,6 +775,14 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) goto done_free_dma_rsp; } + if ((config[0] & INTERNAL_LOOPBACK_MASK) != 0) { + ql_dbg(ql_dbg_user, vha, 0x70c4, + "Loopback operation already in " + "progress.\n"); + rval = -EAGAIN; + goto done_free_dma_rsp; + } + ql_dbg(ql_dbg_user, vha, 0x70c0, "elreq.options=%04x\n", elreq.options); @@ -755,7 +792,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) config, new_config, elreq.options); else rval = qla81xx_reset_loopback_mode(vha, - config, 1); + config, 1, 0); else rval = qla81xx_set_loopback_mode(vha, config, new_config, elreq.options); @@ -772,14 +809,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) command_sent = INT_DEF_LB_LOOPBACK_CMD; rval = qla2x00_loopback_test(vha, &elreq, response); - if (new_config[0]) { - /* Revert back to original port config - * Also clear internal loopback - */ - qla81xx_reset_loopback_mode(vha, - new_config, 0); - } - if (response[0] == MBS_COMMAND_ERROR && response[1] == MBS_LB_RESET) { ql_log(ql_log_warn, vha, 0x7029, @@ -788,15 +817,39 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) qla2xxx_wake_dpc(vha); qla2x00_wait_for_chip_reset(vha); /* Also reset the MPI */ - if (qla81xx_restart_mpi_firmware(vha) != - QLA_SUCCESS) { - ql_log(ql_log_warn, vha, 0x702a, - "MPI reset failed.\n"); + if (IS_QLA81XX(ha)) { + if (qla81xx_restart_mpi_firmware(vha) != + QLA_SUCCESS) { + ql_log(ql_log_warn, vha, 0x702a, + "MPI reset failed.\n"); + } } rval = -EIO; goto done_free_dma_rsp; } + + if (new_config[0]) { + int ret; + + /* Revert back to original port config + * Also clear internal loopback + */ + ret = qla81xx_reset_loopback_mode(vha, + new_config, 0, 1); + if (ret) { + /* + * If the reset of the loopback mode + * doesn't work take FCoE dump and then + * reset the chip. + */ + ha->isp_ops->fw_dump(vha, 0); + set_bit(ISP_ABORT_NEEDED, + &vha->dpc_flags); + } + + } + } else { type = "FC_BSG_HST_VENDOR_LOOPBACK"; ql_dbg(ql_dbg_user, vha, 0x702b, @@ -1950,7 +2003,7 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job) if (!req) continue; - for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { if (((sp->type == SRB_CT_CMD) || @@ -1985,6 +2038,6 @@ done: spin_unlock_irqrestore(&ha->hardware_lock, flags); if (bsg_job->request->msgcode == FC_BSG_HST_CT) kfree(sp->fcport); - mempool_free(sp, ha->srb_mempool); + qla2x00_rel_sp(vha, sp); return 0; } diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h index 37b8b7b..e9f6b9b 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.h +++ b/drivers/scsi/qla2xxx/qla_bsg.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 53f9e49..1626de5 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -11,20 +11,21 @@ * ---------------------------------------------------------------------- * | Level | Last Value Used | Holes | * ---------------------------------------------------------------------- - * | Module Init and Probe | 0x0125 | 0x4b,0xba,0xfa | - * | Mailbox commands | 0x114f | 0x111a-0x111b | + * | Module Init and Probe | 0x0126 | 0x4b,0xba,0xfa | + * | Mailbox commands | 0x115b | 0x111a-0x111b | * | | | 0x112c-0x112e | * | | | 0x113a | * | Device Discovery | 0x2087 | 0x2020-0x2022, | * | | | 0x2016 | - * | Queue Command and IO tracing | 0x3030 | 0x3006-0x300b | + * | Queue Command and IO tracing | 0x3031 | 0x3006-0x300b | * | | | 0x3027-0x3028 | * | | | 0x302d-0x302e | * | DPC Thread | 0x401d | 0x4002,0x4013 | * | Async Events | 0x5071 | 0x502b-0x502f | * | | | 0x5047,0x5052 | * | Timer Routines | 0x6011 | | - * | User Space Interactions | 0x70c3 | 0x7018,0x702e, | + * | User Space Interactions | 0x70c4 | 0x7018,0x702e, | + * | | | 0x7020,0x7024, | * | | | 0x7039,0x7045, | * | | | 0x7073-0x7075, | * | | | 0x708c, | @@ -35,11 +36,11 @@ * | | | 0x800b,0x8039 | * | AER/EEH | 0x9011 | | * | Virtual Port | 0xa007 | | - * | ISP82XX Specific | 0xb084 | 0xb002,0xb024 | + * | ISP82XX Specific | 0xb086 | 0xb002,0xb024 | * | MultiQ | 0xc00c | | * | Misc | 0xd010 | | - * | Target Mode | 0xe06f | | - * | Target Mode Management | 0xf071 | | + * | Target Mode | 0xe070 | | + * | Target Mode Management | 0xf072 | | * | Target Mode Task Management | 0x1000b | | * ---------------------------------------------------------------------- */ diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h index 8f911c0..35e20b4 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.h +++ b/drivers/scsi/qla2xxx/qla_dbg.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 6e7727f..c650991 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -37,6 +37,7 @@ #include "qla_nx.h" #define QLA2XXX_DRIVER_NAME "qla2xxx" #define QLA2XXX_APIDEV "ql2xapidev" +#define QLA2XXX_MANUFACTURER "QLogic Corporation" /* * We have MAILBOX_REGISTER_COUNT sized arrays in a few places, @@ -253,8 +254,8 @@ #define LOOP_DOWN_TIME 255 /* 240 */ #define LOOP_DOWN_RESET (LOOP_DOWN_TIME - 30) -/* Maximum outstanding commands in ISP queues (1-65535) */ -#define MAX_OUTSTANDING_COMMANDS 1024 +#define DEFAULT_OUTSTANDING_COMMANDS 1024 +#define MIN_OUTSTANDING_COMMANDS 128 /* ISP request and response entry counts (37-65535) */ #define REQUEST_ENTRY_CNT_2100 128 /* Number of request entries. */ @@ -537,6 +538,8 @@ struct device_reg_25xxmq { uint32_t req_q_out; uint32_t rsp_q_in; uint32_t rsp_q_out; + uint32_t atio_q_in; + uint32_t atio_q_out; }; typedef union { @@ -563,6 +566,9 @@ typedef union { &(reg)->u.isp2100.mailbox5 : \ &(reg)->u.isp2300.rsp_q_out) +#define ISP_ATIO_Q_IN(vha) (vha->hw->tgt.atio_q_in) +#define ISP_ATIO_Q_OUT(vha) (vha->hw->tgt.atio_q_out) + #define MAILBOX_REG(ha, reg, num) \ (IS_QLA2100(ha) || IS_QLA2200(ha) ? \ (num < 8 ? \ @@ -762,8 +768,8 @@ typedef struct { #define MBC_PORT_LOGOUT 0x56 /* Port Logout request */ #define MBC_SEND_RNID_ELS 0x57 /* Send RNID ELS request */ #define MBC_SET_RNID_PARAMS 0x59 /* Set RNID parameters */ -#define MBC_GET_RNID_PARAMS 0x5a /* Data Rate */ -#define MBC_DATA_RATE 0x5d /* Get RNID parameters */ +#define MBC_GET_RNID_PARAMS 0x5a /* Get RNID parameters */ +#define MBC_DATA_RATE 0x5d /* Data Rate */ #define MBC_INITIALIZE_FIRMWARE 0x60 /* Initialize firmware */ #define MBC_INITIATE_LIP 0x62 /* Initiate Loop */ /* Initialization Procedure */ @@ -809,6 +815,7 @@ typedef struct { #define MBC_HOST_MEMORY_COPY 0x53 /* Host Memory Copy. */ #define MBC_SEND_RNFT_ELS 0x5e /* Send RNFT ELS request */ #define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */ +#define MBC_LINK_INITIALIZATION 0x72 /* Do link initialization. */ #define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */ #define MBC_PORT_RESET 0x120 /* Port Reset */ #define MBC_SET_PORT_CONFIG 0x122 /* Set port configuration */ @@ -856,6 +863,9 @@ typedef struct { #define MBX_1 BIT_1 #define MBX_0 BIT_0 +#define RNID_TYPE_SET_VERSION 0x9 +#define RNID_TYPE_ASIC_TEMP 0xC + /* * Firmware state codes from get firmware state mailbox command */ @@ -1841,9 +1851,6 @@ typedef struct fc_port { uint8_t scan_state; } fc_port_t; -#define QLA_FCPORT_SCAN_NONE 0 -#define QLA_FCPORT_SCAN_FOUND 1 - /* * Fibre channel port/lun states. */ @@ -2533,8 +2540,10 @@ struct req_que { uint16_t qos; uint16_t vp_idx; struct rsp_que *rsp; - srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS]; + srb_t **outstanding_cmds; uint32_t current_outstanding_cmd; + uint16_t num_outstanding_cmds; +#define MAX_Q_DEPTH 32 int max_q_depth; }; @@ -2557,11 +2566,13 @@ struct qlt_hw_data { struct atio *atio_ring_ptr; /* Current address. */ uint16_t atio_ring_index; /* Current index. */ uint16_t atio_q_length; + uint32_t __iomem *atio_q_in; + uint32_t __iomem *atio_q_out; void *target_lport_ptr; struct qla_tgt_func_tmpl *tgt_ops; struct qla_tgt *qla_tgt; - struct qla_tgt_cmd *cmds[MAX_OUTSTANDING_COMMANDS]; + struct qla_tgt_cmd *cmds[DEFAULT_OUTSTANDING_COMMANDS]; uint16_t current_handle; struct qla_tgt_vp_map *tgt_vp_map; @@ -2618,7 +2629,6 @@ struct qla_hw_data { uint32_t nic_core_hung:1; uint32_t quiesce_owner:1; - uint32_t thermal_supported:1; uint32_t nic_core_reset_hdlr_active:1; uint32_t nic_core_reset_owner:1; uint32_t isp82xx_no_md_cap:1; @@ -2788,6 +2798,8 @@ struct qla_hw_data { #define IS_PI_SPLIT_DET_CAPABLE_HBA(ha) (IS_QLA83XX(ha)) #define IS_PI_SPLIT_DET_CAPABLE(ha) (IS_PI_SPLIT_DET_CAPABLE_HBA(ha) && \ (((ha)->fw_attributes_h << 16 | (ha)->fw_attributes) & BIT_22)) +#define IS_ATIO_MSIX_CAPABLE(ha) (IS_QLA83XX(ha)) +#define IS_TGT_MODE_CAPABLE(ha) (ha->tgt.atio_q_length) /* HBA serial number */ uint8_t serial0; @@ -2870,7 +2882,13 @@ struct qla_hw_data { struct completion mbx_cmd_comp; /* Serialize mbx access */ struct completion mbx_intr_comp; /* Used for completion notification */ struct completion dcbx_comp; /* For set port config notification */ + struct completion lb_portup_comp; /* Used to wait for link up during + * loopback */ +#define DCBX_COMP_TIMEOUT 20 +#define LB_PORTUP_COMP_TIMEOUT 10 + int notify_dcbx_comp; + int notify_lb_portup_comp; struct mutex selflogin_lock; /* Basic firmware related information. */ @@ -2887,6 +2905,7 @@ struct qla_hw_data { #define RISC_START_ADDRESS_2300 0x800 #define RISC_START_ADDRESS_2400 0x100000 uint16_t fw_xcb_count; + uint16_t fw_iocb_count; uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */ uint8_t fw_seriallink_options[4]; @@ -3056,7 +3075,16 @@ struct qla_hw_data { struct work_struct idc_state_handler; struct work_struct nic_core_unrecoverable; +#define HOST_QUEUE_RAMPDOWN_INTERVAL (60 * HZ) +#define HOST_QUEUE_RAMPUP_INTERVAL (30 * HZ) + unsigned long host_last_rampdown_time; + unsigned long host_last_rampup_time; + int cfg_lun_q_depth; + struct qlt_hw_data tgt; + uint16_t thermal_support; +#define THERMAL_SUPPORT_I2C BIT_0 +#define THERMAL_SUPPORT_ISP BIT_1 }; /* @@ -3115,6 +3143,8 @@ typedef struct scsi_qla_host { #define MPI_RESET_NEEDED 19 /* Initiate MPI FW reset */ #define ISP_QUIESCE_NEEDED 20 /* Driver need some quiescence */ #define SCR_PENDING 21 /* SCR in target mode */ +#define HOST_RAMP_DOWN_QUEUE_DEPTH 22 +#define HOST_RAMP_UP_QUEUE_DEPTH 23 uint32_t device_flags; #define SWITCH_FOUND BIT_0 @@ -3248,8 +3278,6 @@ struct qla_tgt_vp_map { #define NVRAM_DELAY() udelay(10) -#define INVALID_HANDLE (MAX_OUTSTANDING_COMMANDS+1) - /* * Flash support definitions */ diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c index 706c4f7..792a292 100644 --- a/drivers/scsi/qla2xxx/qla_dfs.c +++ b/drivers/scsi/qla2xxx/qla_dfs.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index be6d61a..1ac2b0e 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -300,7 +300,8 @@ struct init_cb_24xx { uint32_t prio_request_q_address[2]; uint16_t msix; - uint8_t reserved_2[6]; + uint16_t msix_atio; + uint8_t reserved_2[4]; uint16_t atio_q_inpointer; uint16_t atio_q_length; @@ -1387,9 +1388,7 @@ struct qla_flt_header { #define FLT_REG_FCP_PRIO_0 0x87 #define FLT_REG_FCP_PRIO_1 0x88 #define FLT_REG_FCOE_FW 0xA4 -#define FLT_REG_FCOE_VPD_0 0xA9 #define FLT_REG_FCOE_NVRAM_0 0xAA -#define FLT_REG_FCOE_VPD_1 0xAB #define FLT_REG_FCOE_NVRAM_1 0xAC struct qla_flt_region { diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 2411d1a..eb3ca21 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -55,7 +55,7 @@ extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *); extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *); extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *); -extern int qla2x00_get_thermal_temp(scsi_qla_host_t *, uint16_t *, uint16_t *); +extern int qla2x00_get_thermal_temp(scsi_qla_host_t *, uint16_t *); extern void qla84xx_put_chip(struct scsi_qla_host *); @@ -84,6 +84,9 @@ extern int qla83xx_nic_core_reset(scsi_qla_host_t *); extern void qla83xx_reset_ownership(scsi_qla_host_t *); extern int qla2xxx_mctp_dump(scsi_qla_host_t *); +extern int +qla2x00_alloc_outstanding_cmds(struct qla_hw_data *, struct req_que *); + /* * Global Data in qla_os.c source file. */ @@ -94,6 +97,7 @@ extern int qlport_down_retry; extern int ql2xplogiabsentdevice; extern int ql2xloginretrycount; extern int ql2xfdmienable; +extern int ql2xmaxqdepth; extern int ql2xallocfwdump; extern int ql2xextended_error_logging; extern int ql2xiidmaenable; @@ -278,6 +282,9 @@ extern int qla2x00_get_port_name(scsi_qla_host_t *, uint16_t, uint8_t *, uint8_t); extern int +qla24xx_link_initialize(scsi_qla_host_t *); + +extern int qla2x00_lip_reset(scsi_qla_host_t *); extern int @@ -351,6 +358,9 @@ extern int qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *); extern int +qla2x00_set_driver_version(scsi_qla_host_t *, char *); + +extern int qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *, uint16_t, uint16_t, uint16_t, uint16_t); @@ -436,6 +446,7 @@ extern uint8_t *qla25xx_read_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t, uint32_t); extern int qla25xx_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t, uint32_t); +extern int qla2x00_is_a_vp_did(scsi_qla_host_t *, uint32_t); extern int qla2x00_beacon_on(struct scsi_qla_host *); extern int qla2x00_beacon_off(struct scsi_qla_host *); diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 01efc0e..9b45525 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -1328,8 +1328,8 @@ qla2x00_fdmi_rhba(scsi_qla_host_t *vha) /* Manufacturer. */ eiter = (struct ct_fdmi_hba_attr *) (entries + size); eiter->type = __constant_cpu_to_be16(FDMI_HBA_MANUFACTURER); - strcpy(eiter->a.manufacturer, "QLogic Corporation"); - alen = strlen(eiter->a.manufacturer); + alen = strlen(QLA2XXX_MANUFACTURER); + strncpy(eiter->a.manufacturer, QLA2XXX_MANUFACTURER, alen + 1); alen += (alen & 3) ? (4 - (alen & 3)) : 4; eiter->len = cpu_to_be16(4 + alen); size += 4 + alen; @@ -1649,8 +1649,8 @@ qla2x00_fdmi_rpa(scsi_qla_host_t *vha) /* OS device name. */ eiter = (struct ct_fdmi_port_attr *) (entries + size); eiter->type = __constant_cpu_to_be16(FDMI_PORT_OS_DEVICE_NAME); - strcpy(eiter->a.os_dev_name, QLA2XXX_DRIVER_NAME); - alen = strlen(eiter->a.os_dev_name); + alen = strlen(QLA2XXX_DRIVER_NAME); + strncpy(eiter->a.os_dev_name, QLA2XXX_DRIVER_NAME, alen + 1); alen += (alen & 3) ? (4 - (alen & 3)) : 4; eiter->len = cpu_to_be16(4 + alen); size += 4 + alen; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 563eee3..edf4d14 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -70,9 +70,7 @@ qla2x00_sp_free(void *data, void *ptr) struct scsi_qla_host *vha = (scsi_qla_host_t *)data; del_timer(&iocb->timer); - mempool_free(sp, vha->hw->srb_mempool); - - QLA_VHA_MARK_NOT_BUSY(vha); + qla2x00_rel_sp(vha, sp); } /* Asynchronous Login/Logout Routines -------------------------------------- */ @@ -525,7 +523,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) vha->flags.reset_active = 0; ha->flags.pci_channel_io_perm_failure = 0; ha->flags.eeh_busy = 0; - ha->flags.thermal_supported = 1; + ha->thermal_support = THERMAL_SUPPORT_I2C|THERMAL_SUPPORT_ISP; atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); atomic_set(&vha->loop_state, LOOP_DOWN); vha->device_flags = DFLG_NO_CABLE; @@ -621,6 +619,8 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) qla24xx_read_fcp_prio_cfg(vha); + qla2x00_set_driver_version(vha, QLA2XXX_VERSION); + return (rval); } @@ -1559,6 +1559,47 @@ done: return rval; } +int +qla2x00_alloc_outstanding_cmds(struct qla_hw_data *ha, struct req_que *req) +{ + /* Don't try to reallocate the array */ + if (req->outstanding_cmds) + return QLA_SUCCESS; + + if (!IS_FWI2_CAPABLE(ha) || (ha->mqiobase && + (ql2xmultique_tag || ql2xmaxqueues > 1))) + req->num_outstanding_cmds = DEFAULT_OUTSTANDING_COMMANDS; + else { + if (ha->fw_xcb_count <= ha->fw_iocb_count) + req->num_outstanding_cmds = ha->fw_xcb_count; + else + req->num_outstanding_cmds = ha->fw_iocb_count; + } + + req->outstanding_cmds = kzalloc(sizeof(srb_t *) * + req->num_outstanding_cmds, GFP_KERNEL); + + if (!req->outstanding_cmds) { + /* + * Try to allocate a minimal size just so we can get through + * initialization. + */ + req->num_outstanding_cmds = MIN_OUTSTANDING_COMMANDS; + req->outstanding_cmds = kzalloc(sizeof(srb_t *) * + req->num_outstanding_cmds, GFP_KERNEL); + + if (!req->outstanding_cmds) { + ql_log(ql_log_fatal, NULL, 0x0126, + "Failed to allocate memory for " + "outstanding_cmds for req_que %p.\n", req); + req->num_outstanding_cmds = 0; + return QLA_FUNCTION_FAILED; + } + } + + return QLA_SUCCESS; +} + /** * qla2x00_setup_chip() - Load and start RISC firmware. * @ha: HA context @@ -1628,9 +1669,18 @@ enable_82xx_npiv: MIN_MULTI_ID_FABRIC - 1; } qla2x00_get_resource_cnts(vha, NULL, - &ha->fw_xcb_count, NULL, NULL, + &ha->fw_xcb_count, NULL, &ha->fw_iocb_count, &ha->max_npiv_vports, NULL); + /* + * Allocate the array of outstanding commands + * now that we know the firmware resources. + */ + rval = qla2x00_alloc_outstanding_cmds(ha, + vha->req); + if (rval != QLA_SUCCESS) + goto failed; + if (!fw_major_version && ql2xallocfwdump && !IS_QLA82XX(ha)) qla2x00_alloc_fw_dump(vha); @@ -1914,7 +1964,7 @@ qla24xx_config_rings(struct scsi_qla_host *vha) WRT_REG_DWORD(®->isp24.rsp_q_in, 0); WRT_REG_DWORD(®->isp24.rsp_q_out, 0); } - qlt_24xx_config_rings(vha, reg); + qlt_24xx_config_rings(vha); /* PCI posting */ RD_REG_DWORD(&ioreg->hccr); @@ -1948,7 +1998,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha) req = ha->req_q_map[que]; if (!req) continue; - for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) + for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) req->outstanding_cmds[cnt] = NULL; req->current_outstanding_cmd = 1; @@ -2157,6 +2207,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha) char connect_type[22]; struct qla_hw_data *ha = vha->hw; unsigned long flags; + scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); /* Get host addresses. */ rval = qla2x00_get_adapter_id(vha, @@ -2170,6 +2221,13 @@ qla2x00_configure_hba(scsi_qla_host_t *vha) } else { ql_log(ql_log_warn, vha, 0x2009, "Unable to get host loop ID.\n"); + if (IS_FWI2_CAPABLE(ha) && (vha == base_vha) && + (rval == QLA_COMMAND_ERROR && loop_id == 0x1b)) { + ql_log(ql_log_warn, vha, 0x1151, + "Doing link init.\n"); + if (qla24xx_link_initialize(vha) == QLA_SUCCESS) + return rval; + } set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); } return (rval); @@ -2690,7 +2748,6 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags) fcport->loop_id = FC_NO_LOOP_ID; qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED); fcport->supported_classes = FC_COS_UNSPECIFIED; - fcport->scan_state = QLA_FCPORT_SCAN_NONE; return fcport; } @@ -3103,7 +3160,7 @@ static int qla2x00_configure_fabric(scsi_qla_host_t *vha) { int rval; - fc_port_t *fcport; + fc_port_t *fcport, *fcptemp; uint16_t next_loopid; uint16_t mb[MAILBOX_REGISTER_COUNT]; uint16_t loop_id; @@ -3141,7 +3198,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) 0xfc, mb, BIT_1|BIT_0); if (rval != QLA_SUCCESS) { set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); - break; + return rval; } if (mb[0] != MBS_COMMAND_COMPLETE) { ql_dbg(ql_dbg_disc, vha, 0x2042, @@ -3173,16 +3230,21 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) } } +#define QLA_FCPORT_SCAN 1 +#define QLA_FCPORT_FOUND 2 + + list_for_each_entry(fcport, &vha->vp_fcports, list) { + fcport->scan_state = QLA_FCPORT_SCAN; + } + rval = qla2x00_find_all_fabric_devs(vha, &new_fcports); if (rval != QLA_SUCCESS) break; - /* Add new ports to existing port list */ - list_splice_tail_init(&new_fcports, &vha->vp_fcports); - - /* Starting free loop ID. */ - next_loopid = ha->min_external_loopid; - + /* + * Logout all previous fabric devices marked lost, except + * FCP2 devices. + */ list_for_each_entry(fcport, &vha->vp_fcports, list) { if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) break; @@ -3190,8 +3252,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) continue; - /* Logout lost/gone fabric devices (non-FCP2) */ - if (fcport->scan_state != QLA_FCPORT_SCAN_FOUND && + if (fcport->scan_state == QLA_FCPORT_SCAN && atomic_read(&fcport->state) == FCS_ONLINE) { qla2x00_mark_device_lost(vha, fcport, ql2xplogiabsentdevice, 0); @@ -3204,30 +3265,74 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa); + fcport->loop_id = FC_NO_LOOP_ID; } - continue; } - fcport->scan_state = QLA_FCPORT_SCAN_NONE; - - /* Login fabric devices that need a login */ - if ((fcport->flags & FCF_LOGIN_NEEDED) != 0 && - atomic_read(&vha->loop_down_timer) == 0) { - if (fcport->loop_id == FC_NO_LOOP_ID) { - fcport->loop_id = next_loopid; - rval = qla2x00_find_new_loop_id( - base_vha, fcport); - if (rval != QLA_SUCCESS) { - /* Ran out of IDs to use */ - continue; - } + } + + /* Starting free loop ID. */ + next_loopid = ha->min_external_loopid; + + /* + * Scan through our port list and login entries that need to be + * logged in. + */ + list_for_each_entry(fcport, &vha->vp_fcports, list) { + if (atomic_read(&vha->loop_down_timer) || + test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) + break; + + if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 || + (fcport->flags & FCF_LOGIN_NEEDED) == 0) + continue; + + if (fcport->loop_id == FC_NO_LOOP_ID) { + fcport->loop_id = next_loopid; + rval = qla2x00_find_new_loop_id( + base_vha, fcport); + if (rval != QLA_SUCCESS) { + /* Ran out of IDs to use */ + break; } } + /* Login and update database */ + qla2x00_fabric_dev_login(vha, fcport, &next_loopid); + } + + /* Exit if out of loop IDs. */ + if (rval != QLA_SUCCESS) { + break; + } + + /* + * Login and add the new devices to our port list. + */ + list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) { + if (atomic_read(&vha->loop_down_timer) || + test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) + break; + + /* Find a new loop ID to use. */ + fcport->loop_id = next_loopid; + rval = qla2x00_find_new_loop_id(base_vha, fcport); + if (rval != QLA_SUCCESS) { + /* Ran out of IDs to use */ + break; + } /* Login and update database */ qla2x00_fabric_dev_login(vha, fcport, &next_loopid); + + list_move_tail(&fcport->list, &vha->vp_fcports); } } while (0); + /* Free all new device structures not processed. */ + list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) { + list_del(&fcport->list); + kfree(fcport); + } + if (rval) { ql_dbg(ql_dbg_disc, vha, 0x2068, "Configure fabric error exit rval=%d.\n", rval); @@ -3263,8 +3368,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, int first_dev, last_dev; port_id_t wrap = {}, nxt_d_id; struct qla_hw_data *ha = vha->hw; - struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev); - struct scsi_qla_host *tvp; + struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); rval = QLA_SUCCESS; @@ -3377,22 +3481,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, continue; /* Bypass virtual ports of the same host. */ - found = 0; - if (ha->num_vhosts) { - unsigned long flags; - - spin_lock_irqsave(&ha->vport_slock, flags); - list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { - if (new_fcport->d_id.b24 == vp->d_id.b24) { - found = 1; - break; - } - } - spin_unlock_irqrestore(&ha->vport_slock, flags); - - if (found) - continue; - } + if (qla2x00_is_a_vp_did(vha, new_fcport->d_id.b24)) + continue; /* Bypass if same domain and area of adapter. */ if (((new_fcport->d_id.b24 & 0xffff00) == @@ -3417,7 +3507,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, WWN_SIZE)) continue; - fcport->scan_state = QLA_FCPORT_SCAN_FOUND; + fcport->scan_state = QLA_FCPORT_FOUND; found++; @@ -5004,7 +5094,7 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr, return rval; } -#define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/" +#define QLA_FW_URL "http://ldriver.qlogic.com/firmware/" int qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) @@ -5529,6 +5619,8 @@ qla81xx_nvram_config(scsi_qla_host_t *vha) if (IS_T10_PI_CAPABLE(ha)) nv->frame_payload_size &= ~7; + qlt_81xx_config_nvram_stage1(vha, nv); + /* Reset Initialization control block */ memset(icb, 0, ha->init_cb_size); @@ -5569,6 +5661,8 @@ qla81xx_nvram_config(scsi_qla_host_t *vha) qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name), "QLE8XXX"); + qlt_81xx_config_nvram_stage2(vha, icb); + /* Use alternate WWN? */ if (nv->host_p & __constant_cpu_to_le32(BIT_15)) { memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE); diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index c0462c0..68e2c4a 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -198,6 +198,13 @@ done: } static inline void +qla2x00_rel_sp(scsi_qla_host_t *vha, srb_t *sp) +{ + mempool_free(sp, vha->hw->srb_mempool); + QLA_VHA_MARK_NOT_BUSY(vha); +} + +static inline void qla2x00_init_timer(srb_t *sp, unsigned long tmo) { init_timer(&sp->u.iocb_cmd.timer); @@ -213,3 +220,22 @@ qla2x00_gid_list_size(struct qla_hw_data *ha) { return sizeof(struct gid_list_info) * ha->max_fibre_devices; } + +static inline void +qla2x00_do_host_ramp_up(scsi_qla_host_t *vha) +{ + if (vha->hw->cfg_lun_q_depth >= ql2xmaxqdepth) + return; + + /* Wait at least HOST_QUEUE_RAMPDOWN_INTERVAL before ramping up */ + if (time_before(jiffies, (vha->hw->host_last_rampdown_time + + HOST_QUEUE_RAMPDOWN_INTERVAL))) + return; + + /* Wait at least HOST_QUEUE_RAMPUP_INTERVAL between each ramp up */ + if (time_before(jiffies, (vha->hw->host_last_rampup_time + + HOST_QUEUE_RAMPUP_INTERVAL))) + return; + + set_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags); +} diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index a481684..d263031 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -349,14 +349,14 @@ qla2x00_start_scsi(srb_t *sp) /* Check for room in outstanding command list. */ handle = req->current_outstanding_cmd; - for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { + for (index = 1; index < req->num_outstanding_cmds; index++) { handle++; - if (handle == MAX_OUTSTANDING_COMMANDS) + if (handle == req->num_outstanding_cmds) handle = 1; if (!req->outstanding_cmds[handle]) break; } - if (index == MAX_OUTSTANDING_COMMANDS) + if (index == req->num_outstanding_cmds) goto queuing_error; /* Map the sg table so we have an accurate count of sg entries needed */ @@ -1467,16 +1467,15 @@ qla24xx_start_scsi(srb_t *sp) /* Check for room in outstanding command list. */ handle = req->current_outstanding_cmd; - for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { + for (index = 1; index < req->num_outstanding_cmds; index++) { handle++; - if (handle == MAX_OUTSTANDING_COMMANDS) + if (handle == req->num_outstanding_cmds) handle = 1; if (!req->outstanding_cmds[handle]) break; } - if (index == MAX_OUTSTANDING_COMMANDS) { + if (index == req->num_outstanding_cmds) goto queuing_error; - } /* Map the sg table so we have an accurate count of sg entries needed */ if (scsi_sg_count(cmd)) { @@ -1641,15 +1640,15 @@ qla24xx_dif_start_scsi(srb_t *sp) /* Check for room in outstanding command list. */ handle = req->current_outstanding_cmd; - for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { + for (index = 1; index < req->num_outstanding_cmds; index++) { handle++; - if (handle == MAX_OUTSTANDING_COMMANDS) + if (handle == req->num_outstanding_cmds) handle = 1; if (!req->outstanding_cmds[handle]) break; } - if (index == MAX_OUTSTANDING_COMMANDS) + if (index == req->num_outstanding_cmds) goto queuing_error; /* Compute number of required data segments */ @@ -1822,14 +1821,14 @@ qla2x00_alloc_iocbs(scsi_qla_host_t *vha, srb_t *sp) /* Check for room in outstanding command list. */ handle = req->current_outstanding_cmd; - for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { + for (index = 1; req->num_outstanding_cmds; index++) { handle++; - if (handle == MAX_OUTSTANDING_COMMANDS) + if (handle == req->num_outstanding_cmds) handle = 1; if (!req->outstanding_cmds[handle]) break; } - if (index == MAX_OUTSTANDING_COMMANDS) { + if (index == req->num_outstanding_cmds) { ql_log(ql_log_warn, vha, 0x700b, "No room on outstanding cmd array.\n"); goto queuing_error; @@ -2263,14 +2262,14 @@ qla82xx_start_scsi(srb_t *sp) /* Check for room in outstanding command list. */ handle = req->current_outstanding_cmd; - for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { + for (index = 1; index < req->num_outstanding_cmds; index++) { handle++; - if (handle == MAX_OUTSTANDING_COMMANDS) + if (handle == req->num_outstanding_cmds) handle = 1; if (!req->outstanding_cmds[handle]) break; } - if (index == MAX_OUTSTANDING_COMMANDS) + if (index == req->num_outstanding_cmds) goto queuing_error; /* Map the sg table so we have an accurate count of sg entries needed */ @@ -2767,15 +2766,15 @@ qla2x00_start_bidir(srb_t *sp, struct scsi_qla_host *vha, uint32_t tot_dsds) /* Check for room in outstanding command list. */ handle = req->current_outstanding_cmd; - for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { + for (index = 1; index < req->num_outstanding_cmds; index++) { handle++; - if (handle == MAX_OUTSTANDING_COMMANDS) + if (handle == req->num_outstanding_cmds) handle = 1; if (!req->outstanding_cmds[handle]) break; } - if (index == MAX_OUTSTANDING_COMMANDS) { + if (index == req->num_outstanding_cmds) { rval = EXT_STATUS_BUSY; goto queuing_error; } diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 873c820..e9dbd74 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -13,6 +13,8 @@ #include #include +#include "qla_target.h" + static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t); static void qla2x00_process_completed_request(struct scsi_qla_host *, struct req_que *, uint32_t); @@ -489,10 +491,37 @@ qla83xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb) if (mb[1] & IDC_DEVICE_STATE_CHANGE) { ql_log(ql_log_info, vha, 0x506a, "IDC Device-State changed = 0x%x.\n", mb[4]); + if (ha->flags.nic_core_reset_owner) + return; qla83xx_schedule_work(vha, MBA_IDC_AEN); } } +int +qla2x00_is_a_vp_did(scsi_qla_host_t *vha, uint32_t rscn_entry) +{ + struct qla_hw_data *ha = vha->hw; + scsi_qla_host_t *vp; + uint32_t vp_did; + unsigned long flags; + int ret = 0; + + if (!ha->num_vhosts) + return ret; + + spin_lock_irqsave(&ha->vport_slock, flags); + list_for_each_entry(vp, &ha->vp_list, list) { + vp_did = vp->d_id.b24; + if (vp_did == rscn_entry) { + ret = 1; + break; + } + } + spin_unlock_irqrestore(&ha->vport_slock, flags); + + return ret; +} + /** * qla2x00_async_event() - Process aynchronous events. * @ha: SCSI driver HA context @@ -899,6 +928,10 @@ skip_rio: /* Ignore reserved bits from RSCN-payload. */ rscn_entry = ((mb[1] & 0x3ff) << 16) | mb[2]; + /* Skip RSCNs for virtual ports on the same physical port */ + if (qla2x00_is_a_vp_did(vha, rscn_entry)) + break; + atomic_set(&vha->loop_down_timer, 0); vha->flags.management_server_logged_in = 0; @@ -983,14 +1016,25 @@ skip_rio: mb[1], mb[2], mb[3]); break; case MBA_IDC_NOTIFY: - /* See if we need to quiesce any I/O */ - if (IS_QLA8031(vha->hw)) - if ((mb[2] & 0x7fff) == MBC_PORT_RESET || - (mb[2] & 0x7fff) == MBC_SET_PORT_CONFIG) { + if (IS_QLA8031(vha->hw)) { + mb[4] = RD_REG_WORD(®24->mailbox4); + if (((mb[2] & 0x7fff) == MBC_PORT_RESET || + (mb[2] & 0x7fff) == MBC_SET_PORT_CONFIG) && + (mb[4] & INTERNAL_LOOPBACK_MASK) != 0) { set_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags); + /* + * Extend loop down timer since port is active. + */ + if (atomic_read(&vha->loop_state) == LOOP_DOWN) + atomic_set(&vha->loop_down_timer, + LOOP_DOWN_TIME); qla2xxx_wake_dpc(vha); } + } case MBA_IDC_COMPLETE: + if (ha->notify_lb_portup_comp) + complete(&ha->lb_portup_comp); + /* Fallthru */ case MBA_IDC_TIME_EXT: if (IS_QLA81XX(vha->hw) || IS_QLA8031(vha->hw)) qla81xx_idc_event(vha, mb[0], mb[1]); @@ -1029,7 +1073,7 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha, struct qla_hw_data *ha = vha->hw; /* Validate handle. */ - if (index >= MAX_OUTSTANDING_COMMANDS) { + if (index >= req->num_outstanding_cmds) { ql_log(ql_log_warn, vha, 0x3014, "Invalid SCSI command index (%x).\n", index); @@ -1067,7 +1111,7 @@ qla2x00_get_sp_from_handle(scsi_qla_host_t *vha, const char *func, uint16_t index; index = LSW(pkt->handle); - if (index >= MAX_OUTSTANDING_COMMANDS) { + if (index >= req->num_outstanding_cmds) { ql_log(ql_log_warn, vha, 0x5031, "Invalid command index (%x).\n", index); if (IS_QLA82XX(ha)) @@ -1740,7 +1784,7 @@ qla25xx_process_bidir_status_iocb(scsi_qla_host_t *vha, void *pkt, sts24 = (struct sts_entry_24xx *) pkt; /* Validate handle. */ - if (index >= MAX_OUTSTANDING_COMMANDS) { + if (index >= req->num_outstanding_cmds) { ql_log(ql_log_warn, vha, 0x70af, "Invalid SCSI completion handle 0x%x.\n", index); set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); @@ -1910,9 +1954,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) req = ha->req_q_map[que]; /* Validate handle. */ - if (handle < MAX_OUTSTANDING_COMMANDS) { + if (handle < req->num_outstanding_cmds) sp = req->outstanding_cmds[handle]; - } else + else sp = NULL; if (sp == NULL) { @@ -1934,6 +1978,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) /* Fast path completion. */ if (comp_status == CS_COMPLETE && scsi_status == 0) { + qla2x00_do_host_ramp_up(vha); qla2x00_process_completed_request(vha, req, handle); return; @@ -2193,6 +2238,9 @@ out: cp->cmnd[8], cp->cmnd[9], scsi_bufflen(cp), rsp_info_len, resid_len, fw_resid_len); + if (!res) + qla2x00_do_host_ramp_up(vha); + if (rsp->status_srb == NULL) sp->done(ha, sp, res); } @@ -2747,6 +2795,12 @@ static struct qla_init_msix_entry qla82xx_msix_entries[2] = { { "qla2xxx (rsp_q)", qla82xx_msix_rsp_q }, }; +static struct qla_init_msix_entry qla83xx_msix_entries[3] = { + { "qla2xxx (default)", qla24xx_msix_default }, + { "qla2xxx (rsp_q)", qla24xx_msix_rsp_q }, + { "qla2xxx (atio_q)", qla83xx_msix_atio_q }, +}; + static void qla24xx_disable_msix(struct qla_hw_data *ha) { @@ -2827,9 +2881,13 @@ msix_failed: } /* Enable MSI-X vectors for the base queue */ - for (i = 0; i < 2; i++) { + for (i = 0; i < ha->msix_count; i++) { qentry = &ha->msix_entries[i]; - if (IS_QLA82XX(ha)) { + if (QLA_TGT_MODE_ENABLED() && IS_ATIO_MSIX_CAPABLE(ha)) { + ret = request_irq(qentry->vector, + qla83xx_msix_entries[i].handler, + 0, qla83xx_msix_entries[i].name, rsp); + } else if (IS_QLA82XX(ha)) { ret = request_irq(qentry->vector, qla82xx_msix_entries[i].handler, 0, qla82xx_msix_entries[i].name, rsp); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 68c55ea..186dd59 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -900,13 +900,13 @@ qla2x00_abort_command(srb_t *sp) "Entered %s.\n", __func__); spin_lock_irqsave(&ha->hardware_lock, flags); - for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) { + for (handle = 1; handle < req->num_outstanding_cmds; handle++) { if (req->outstanding_cmds[handle] == sp) break; } spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (handle == MAX_OUTSTANDING_COMMANDS) { + if (handle == req->num_outstanding_cmds) { /* command not found */ return QLA_FUNCTION_FAILED; } @@ -1633,6 +1633,54 @@ qla2x00_get_port_name(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t *name, } /* + * qla24xx_link_initialization + * Issue link initialization mailbox command. + * + * Input: + * ha = adapter block pointer. + * TARGET_QUEUE_LOCK must be released. + * ADAPTER_STATE_LOCK must be released. + * + * Returns: + * qla2x00 local function return status code. + * + * Context: + * Kernel context. + */ +int +qla24xx_link_initialize(scsi_qla_host_t *vha) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1152, + "Entered %s.\n", __func__); + + if (!IS_FWI2_CAPABLE(vha->hw) || IS_CNA_CAPABLE(vha->hw)) + return QLA_FUNCTION_FAILED; + + mcp->mb[0] = MBC_LINK_INITIALIZATION; + mcp->mb[1] = BIT_6|BIT_4; + mcp->mb[2] = 0; + mcp->mb[3] = 0; + mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + + if (rval != QLA_SUCCESS) { + ql_dbg(ql_dbg_mbx, vha, 0x1153, "Failed=%x.\n", rval); + } else { + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1154, + "Done %s.\n", __func__); + } + + return rval; +} + +/* * qla2x00_lip_reset * Issue LIP reset mailbox command. * @@ -2535,12 +2583,12 @@ qla24xx_abort_command(srb_t *sp) "Entered %s.\n", __func__); spin_lock_irqsave(&ha->hardware_lock, flags); - for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) { + for (handle = 1; handle < req->num_outstanding_cmds; handle++) { if (req->outstanding_cmds[handle] == sp) break; } spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (handle == MAX_OUTSTANDING_COMMANDS) { + if (handle == req->num_outstanding_cmds) { /* Command not found. */ return QLA_FUNCTION_FAILED; } @@ -3093,6 +3141,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, struct qla_hw_data *ha = vha->hw; scsi_qla_host_t *vp; unsigned long flags; + int found; ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10b6, "Entered %s.\n", __func__); @@ -3128,13 +3177,17 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, return; } + found = 0; spin_lock_irqsave(&ha->vport_slock, flags); - list_for_each_entry(vp, &ha->vp_list, list) - if (vp_idx == vp->vp_idx) + list_for_each_entry(vp, &ha->vp_list, list) { + if (vp_idx == vp->vp_idx) { + found = 1; break; + } + } spin_unlock_irqrestore(&ha->vport_slock, flags); - if (!vp) + if (!found) return; vp->d_id.b.domain = rptid_entry->port_id[2]; @@ -3814,6 +3867,97 @@ qla81xx_restart_mpi_firmware(scsi_qla_host_t *vha) } int +qla2x00_set_driver_version(scsi_qla_host_t *vha, char *version) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + int len; + uint16_t dwlen; + uint8_t *str; + dma_addr_t str_dma; + struct qla_hw_data *ha = vha->hw; + + if (!IS_FWI2_CAPABLE(ha) || IS_QLA82XX(ha)) + return QLA_FUNCTION_FAILED; + + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1155, + "Entered %s.\n", __func__); + + str = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &str_dma); + if (!str) { + ql_log(ql_log_warn, vha, 0x1156, + "Failed to allocate driver version param.\n"); + return QLA_MEMORY_ALLOC_FAILED; + } + + memcpy(str, "\x7\x3\x11\x0", 4); + dwlen = str[0]; + len = dwlen * sizeof(uint32_t) - 4; + memset(str + 4, 0, len); + if (len > strlen(version)) + len = strlen(version); + memcpy(str + 4, version, len); + + mcp->mb[0] = MBC_SET_RNID_PARAMS; + mcp->mb[1] = RNID_TYPE_SET_VERSION << 8 | dwlen; + mcp->mb[2] = MSW(LSD(str_dma)); + mcp->mb[3] = LSW(LSD(str_dma)); + mcp->mb[6] = MSW(MSD(str_dma)); + mcp->mb[7] = LSW(MSD(str_dma)); + mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + + if (rval != QLA_SUCCESS) { + ql_dbg(ql_dbg_mbx, vha, 0x1157, + "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]); + } else { + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1158, + "Done %s.\n", __func__); + } + + dma_pool_free(ha->s_dma_pool, str, str_dma); + + return rval; +} + +static int +qla2x00_read_asic_temperature(scsi_qla_host_t *vha, uint16_t *temp) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_FWI2_CAPABLE(vha->hw)) + return QLA_FUNCTION_FAILED; + + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1159, + "Entered %s.\n", __func__); + + mcp->mb[0] = MBC_GET_RNID_PARAMS; + mcp->mb[1] = RNID_TYPE_ASIC_TEMP << 8; + mcp->out_mb = MBX_1|MBX_0; + mcp->in_mb = MBX_1|MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + *temp = mcp->mb[1]; + + if (rval != QLA_SUCCESS) { + ql_dbg(ql_dbg_mbx, vha, 0x115a, + "Failed=%x mb[0]=%x,%x.\n", rval, mcp->mb[0], mcp->mb[1]); + } else { + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x115b, + "Done %s.\n", __func__); + } + + return rval; +} + +int qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp, uint16_t dev, uint16_t off, uint16_t len, uint16_t opt) { @@ -4415,38 +4559,45 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority, } int -qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp, uint16_t *frac) +qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp) { - int rval; - uint8_t byte; + int rval = QLA_FUNCTION_FAILED; struct qla_hw_data *ha = vha->hw; + uint8_t byte; ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10ca, "Entered %s.\n", __func__); - /* Integer part */ - rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x01, 1, - BIT_13|BIT_12|BIT_0); - if (rval != QLA_SUCCESS) { - ql_dbg(ql_dbg_mbx, vha, 0x10c9, "Failed=%x.\n", rval); - ha->flags.thermal_supported = 0; - goto fail; + if (ha->thermal_support & THERMAL_SUPPORT_I2C) { + rval = qla2x00_read_sfp(vha, 0, &byte, + 0x98, 0x1, 1, BIT_13|BIT_12|BIT_0); + *temp = byte; + if (rval == QLA_SUCCESS) + goto done; + + ql_log(ql_log_warn, vha, 0x10c9, + "Thermal not supported by I2C.\n"); + ha->thermal_support &= ~THERMAL_SUPPORT_I2C; } - *temp = byte; - /* Fraction part */ - rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x10, 1, - BIT_13|BIT_12|BIT_0); - if (rval != QLA_SUCCESS) { - ql_dbg(ql_dbg_mbx, vha, 0x1019, "Failed=%x.\n", rval); - ha->flags.thermal_supported = 0; - goto fail; + if (ha->thermal_support & THERMAL_SUPPORT_ISP) { + rval = qla2x00_read_asic_temperature(vha, temp); + if (rval == QLA_SUCCESS) + goto done; + + ql_log(ql_log_warn, vha, 0x1019, + "Thermal not supported by ISP.\n"); + ha->thermal_support &= ~THERMAL_SUPPORT_ISP; } - *frac = (byte >> 6) * 25; + ql_log(ql_log_warn, vha, 0x1150, + "Thermal not supported by this card " + "(ignoring further requests).\n"); + return rval; + +done: ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1018, "Done %s.\n", __func__); -fail: return rval; } diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 20fd974..f868a9f 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -523,6 +523,7 @@ qla25xx_free_req_que(struct scsi_qla_host *vha, struct req_que *req) clear_bit(que_id, ha->req_qid_map); mutex_unlock(&ha->vport_lock); } + kfree(req->outstanding_cmds); kfree(req); req = NULL; } @@ -649,6 +650,10 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options, goto que_failed; } + ret = qla2x00_alloc_outstanding_cmds(ha, req); + if (ret != QLA_SUCCESS) + goto que_failed; + mutex_lock(&ha->vport_lock); que_id = find_first_zero_bit(ha->req_qid_map, ha->max_req_queues); if (que_id >= ha->max_req_queues) { @@ -685,7 +690,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options, "options=0x%x.\n", req->options); ql_dbg(ql_dbg_init, base_vha, 0x00dd, "options=0x%x.\n", req->options); - for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) + for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) req->outstanding_cmds[cnt] = NULL; req->current_outstanding_cmd = 1; diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 3e3f593..10754f51 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -847,14 +847,21 @@ static int qla82xx_rom_lock(struct qla_hw_data *ha) { int done = 0, timeout = 0; + uint32_t lock_owner = 0; + scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); while (!done) { /* acquire semaphore2 from PCI HW block */ done = qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_LOCK)); if (done == 1) break; - if (timeout >= qla82xx_rom_lock_timeout) + if (timeout >= qla82xx_rom_lock_timeout) { + lock_owner = qla82xx_rd_32(ha, QLA82XX_ROM_LOCK_ID); + ql_dbg(ql_dbg_p3p, vha, 0xb085, + "Failed to acquire rom lock, acquired by %d.\n", + lock_owner); return -1; + } timeout++; } qla82xx_wr_32(ha, QLA82XX_ROM_LOCK_ID, ROM_LOCK_DRIVER); @@ -3629,7 +3636,7 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha) req = ha->req_q_map[que]; if (!req) continue; - for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { if (!sp->u.scmd.ctx || diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h index 6c953e8..d268e84 100644 --- a/drivers/scsi/qla2xxx/qla_nx.h +++ b/drivers/scsi/qla2xxx/qla_nx.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -897,7 +897,7 @@ struct ct6_dsd { #define FLT_REG_BOOT_CODE_82XX 0x78 #define FLT_REG_FW_82XX 0x74 #define FLT_REG_GOLD_FW_82XX 0x75 -#define FLT_REG_VPD_82XX 0x81 +#define FLT_REG_VPD_8XXX 0x81 #define FA_VPD_SIZE_82XX 0x400 diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 10d23f8..2c6dd3d 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -111,8 +111,7 @@ MODULE_PARM_DESC(ql2xfdmienable, "Enables FDMI registrations. " "0 - no FDMI. Default is 1 - perform FDMI."); -#define MAX_Q_DEPTH 32 -static int ql2xmaxqdepth = MAX_Q_DEPTH; +int ql2xmaxqdepth = MAX_Q_DEPTH; module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xmaxqdepth, "Maximum queue depth to set for each LUN. " @@ -360,6 +359,9 @@ static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req) (req->length + 1) * sizeof(request_t), req->ring, req->dma); + if (req) + kfree(req->outstanding_cmds); + kfree(req); req = NULL; } @@ -628,7 +630,7 @@ qla2x00_sp_free_dma(void *vha, void *ptr) } CMD_SP(cmd) = NULL; - mempool_free(sp, ha->srb_mempool); + qla2x00_rel_sp(sp->fcport->vha, sp); } static void @@ -716,9 +718,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) goto qc24_target_busy; } - sp = qla2x00_get_sp(base_vha, fcport, GFP_ATOMIC); - if (!sp) + sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC); + if (!sp) { + set_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags); goto qc24_host_busy; + } sp->u.scmd.cmd = cmd; sp->type = SRB_SCSI_CMD; @@ -731,6 +735,7 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) if (rval != QLA_SUCCESS) { ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3013, "Start scsi failed rval=%d for cmd=%p.\n", rval, cmd); + set_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags); goto qc24_host_busy_free_sp; } @@ -1010,7 +1015,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t, spin_lock_irqsave(&ha->hardware_lock, flags); req = vha->req; for (cnt = 1; status == QLA_SUCCESS && - cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + cnt < req->num_outstanding_cmds; cnt++) { sp = req->outstanding_cmds[cnt]; if (!sp) continue; @@ -1300,14 +1305,14 @@ qla2x00_loop_reset(scsi_qla_host_t *vha) } if (ha->flags.enable_lip_full_login && !IS_CNA_CAPABLE(ha)) { + atomic_set(&vha->loop_state, LOOP_DOWN); + atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); + qla2x00_mark_all_devices_lost(vha, 0); ret = qla2x00_full_login_lip(vha); if (ret != QLA_SUCCESS) { ql_dbg(ql_dbg_taskm, vha, 0x802d, "full_login_lip=%d.\n", ret); } - atomic_set(&vha->loop_state, LOOP_DOWN); - atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); - qla2x00_mark_all_devices_lost(vha, 0); } if (ha->flags.enable_lip_reset) { @@ -1337,7 +1342,9 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) req = ha->req_q_map[que]; if (!req) continue; - for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + if (!req->outstanding_cmds) + continue; + for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { req->outstanding_cmds[cnt] = NULL; @@ -1453,6 +1460,81 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type) return tag_type; } +static void +qla2x00_host_ramp_down_queuedepth(scsi_qla_host_t *vha) +{ + scsi_qla_host_t *vp; + struct Scsi_Host *shost; + struct scsi_device *sdev; + struct qla_hw_data *ha = vha->hw; + unsigned long flags; + + ha->host_last_rampdown_time = jiffies; + + if (ha->cfg_lun_q_depth <= vha->host->cmd_per_lun) + return; + + if ((ha->cfg_lun_q_depth / 2) < vha->host->cmd_per_lun) + ha->cfg_lun_q_depth = vha->host->cmd_per_lun; + else + ha->cfg_lun_q_depth = ha->cfg_lun_q_depth / 2; + + /* + * Geometrically ramp down the queue depth for all devices on this + * adapter + */ + spin_lock_irqsave(&ha->vport_slock, flags); + list_for_each_entry(vp, &ha->vp_list, list) { + shost = vp->host; + shost_for_each_device(sdev, shost) { + if (sdev->queue_depth > shost->cmd_per_lun) { + if (sdev->queue_depth < ha->cfg_lun_q_depth) + continue; + ql_log(ql_log_warn, vp, 0x3031, + "%ld:%d:%d: Ramping down queue depth to %d", + vp->host_no, sdev->id, sdev->lun, + ha->cfg_lun_q_depth); + qla2x00_change_queue_depth(sdev, + ha->cfg_lun_q_depth, SCSI_QDEPTH_DEFAULT); + } + } + } + spin_unlock_irqrestore(&ha->vport_slock, flags); + + return; +} + +static void +qla2x00_host_ramp_up_queuedepth(scsi_qla_host_t *vha) +{ + scsi_qla_host_t *vp; + struct Scsi_Host *shost; + struct scsi_device *sdev; + struct qla_hw_data *ha = vha->hw; + unsigned long flags; + + ha->host_last_rampup_time = jiffies; + ha->cfg_lun_q_depth++; + + /* + * Linearly ramp up the queue depth for all devices on this + * adapter + */ + spin_lock_irqsave(&ha->vport_slock, flags); + list_for_each_entry(vp, &ha->vp_list, list) { + shost = vp->host; + shost_for_each_device(sdev, shost) { + if (sdev->queue_depth > ha->cfg_lun_q_depth) + continue; + qla2x00_change_queue_depth(sdev, ha->cfg_lun_q_depth, + SCSI_QDEPTH_RAMP_UP); + } + } + spin_unlock_irqrestore(&ha->vport_slock, flags); + + return; +} + /** * qla2x00_config_dma_addressing() - Configure OS DMA addressing method. * @ha: HA context @@ -1730,6 +1812,9 @@ qla83xx_iospace_config(struct qla_hw_data *ha) mqiobase_exit: ha->msix_count = ha->max_rsp_queues + 1; + + qlt_83xx_iospace_config(ha); + ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011f, "MSIX Count:%d.\n", ha->msix_count); return 0; @@ -2230,6 +2315,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->init_cb_size = sizeof(init_cb_t); ha->link_data_rate = PORT_SPEED_UNKNOWN; ha->optrom_size = OPTROM_SIZE_2300; + ha->cfg_lun_q_depth = ql2xmaxqdepth; /* Assign ISP specific operations. */ if (IS_QLA2100(ha)) { @@ -2307,6 +2393,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->mbx_count = MAILBOX_REGISTER_COUNT; req_length = REQUEST_ENTRY_CNT_24XX; rsp_length = RESPONSE_ENTRY_CNT_2300; + ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX; ha->max_loop_id = SNS_LAST_LOOP_ID_2300; ha->init_cb_size = sizeof(struct mid_init_cb_81xx); ha->gid_list_info_size = 8; @@ -2338,6 +2425,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->mbx_count = MAILBOX_REGISTER_COUNT; req_length = REQUEST_ENTRY_CNT_24XX; rsp_length = RESPONSE_ENTRY_CNT_2300; + ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX; ha->max_loop_id = SNS_LAST_LOOP_ID_2300; ha->init_cb_size = sizeof(struct mid_init_cb_81xx); ha->gid_list_info_size = 8; @@ -2377,6 +2465,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) complete(&ha->mbx_cmd_comp); init_completion(&ha->mbx_intr_comp); init_completion(&ha->dcbx_comp); + init_completion(&ha->lb_portup_comp); set_bit(0, (unsigned long *) ha->vp_idx_map); @@ -2720,6 +2809,9 @@ qla2x00_shutdown(struct pci_dev *pdev) scsi_qla_host_t *vha; struct qla_hw_data *ha; + if (!atomic_read(&pdev->enable_cnt)) + return; + vha = pci_get_drvdata(pdev); ha = vha->hw; @@ -3974,6 +4066,8 @@ qla83xx_force_lock_recovery(scsi_qla_host_t *base_vha) uint32_t idc_lck_rcvry_stage_mask = 0x3; uint32_t idc_lck_rcvry_owner_mask = 0x3c; struct qla_hw_data *ha = base_vha->hw; + ql_dbg(ql_dbg_p3p, base_vha, 0xb086, + "Trying force recovery of the IDC lock.\n"); rval = qla83xx_rd_reg(base_vha, QLA83XX_IDC_LOCK_RECOVERY, &data); if (rval) @@ -4065,6 +4159,7 @@ qla83xx_idc_lock(scsi_qla_host_t *base_vha, uint16_t requester_id) { uint16_t options = (requester_id << 15) | BIT_6; uint32_t data; + uint32_t lock_owner; struct qla_hw_data *ha = base_vha->hw; /* IDC-lock implementation using driver-lock/lock-id remote registers */ @@ -4076,8 +4171,11 @@ retry_lock: qla83xx_wr_reg(base_vha, QLA83XX_DRIVER_LOCKID, ha->portnum); } else { + qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCKID, + &lock_owner); ql_dbg(ql_dbg_p3p, base_vha, 0xb063, - "Failed to acquire IDC lock. retrying...\n"); + "Failed to acquire IDC lock, acquired by %d, " + "retrying...\n", lock_owner); /* Retry/Perform IDC-Lock recovery */ if (qla83xx_idc_lock_recovery(base_vha) @@ -4605,6 +4703,18 @@ qla2x00_do_dpc(void *data) qla2xxx_flash_npiv_conf(base_vha); } + if (test_and_clear_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, + &base_vha->dpc_flags)) { + /* Prevents simultaneous ramp up and down */ + clear_bit(HOST_RAMP_UP_QUEUE_DEPTH, + &base_vha->dpc_flags); + qla2x00_host_ramp_down_queuedepth(base_vha); + } + + if (test_and_clear_bit(HOST_RAMP_UP_QUEUE_DEPTH, + &base_vha->dpc_flags)) + qla2x00_host_ramp_up_queuedepth(base_vha); + if (!ha->interrupts_on) ha->isp_ops->enable_intrs(ha); @@ -4733,7 +4843,7 @@ qla2x00_timer(scsi_qla_host_t *vha) cpu_flags); req = ha->req_q_map[0]; for (index = 1; - index < MAX_OUTSTANDING_COMMANDS; + index < req->num_outstanding_cmds; index++) { fc_port_t *sfcp; @@ -4802,7 +4912,9 @@ qla2x00_timer(scsi_qla_host_t *vha) test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) || test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) || test_bit(VP_DPC_NEEDED, &vha->dpc_flags) || - test_bit(RELOGIN_NEEDED, &vha->dpc_flags))) { + test_bit(RELOGIN_NEEDED, &vha->dpc_flags) || + test_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags) || + test_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags))) { ql_dbg(ql_dbg_timer, vha, 0x600b, "isp_abort_needed=%d loop_resync_needed=%d " "fcport_update_needed=%d start_dpc=%d " @@ -4815,12 +4927,15 @@ qla2x00_timer(scsi_qla_host_t *vha) ql_dbg(ql_dbg_timer, vha, 0x600c, "beacon_blink_needed=%d isp_unrecoverable=%d " "fcoe_ctx_reset_needed=%d vp_dpc_needed=%d " - "relogin_needed=%d.\n", + "relogin_needed=%d, host_ramp_down_needed=%d " + "host_ramp_up_needed=%d.\n", test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags), test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags), test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags), test_bit(VP_DPC_NEEDED, &vha->dpc_flags), - test_bit(RELOGIN_NEEDED, &vha->dpc_flags)); + test_bit(RELOGIN_NEEDED, &vha->dpc_flags), + test_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags), + test_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags)); qla2xxx_wake_dpc(vha); } diff --git a/drivers/scsi/qla2xxx/qla_settings.h b/drivers/scsi/qla2xxx/qla_settings.h index 892a81e..46ef0ac 100644 --- a/drivers/scsi/qla2xxx/qla_settings.h +++ b/drivers/scsi/qla2xxx/qla_settings.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 32fdc2a..3bef673 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -798,20 +798,8 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) case FLT_REG_BOOTLOAD_82XX: ha->flt_region_bootload = start; break; - case FLT_REG_VPD_82XX: - ha->flt_region_vpd = start; - break; - case FLT_REG_FCOE_VPD_0: - if (!IS_QLA8031(ha)) - break; - ha->flt_region_vpd_nvram = start; - if (ha->flags.port0) - ha->flt_region_vpd = start; - break; - case FLT_REG_FCOE_VPD_1: - if (!IS_QLA8031(ha)) - break; - if (!ha->flags.port0) + case FLT_REG_VPD_8XXX: + if (IS_CNA_CAPABLE(ha)) ha->flt_region_vpd = start; break; case FLT_REG_FCOE_NVRAM_0: diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 80f4b84..61b5d8c 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -52,7 +52,7 @@ MODULE_PARM_DESC(qlini_mode, "\"disabled\" - initiator mode will never be enabled; " "\"enabled\" (default) - initiator mode will always stay enabled."); -static int ql2x_ini_mode = QLA2XXX_INI_MODE_EXCLUSIVE; +int ql2x_ini_mode = QLA2XXX_INI_MODE_EXCLUSIVE; /* * From scsi/fc/fc_fcp.h @@ -1119,6 +1119,7 @@ static void qlt_send_notify_ack(struct scsi_qla_host *vha, nack->u.isp24.srr_rx_id = ntfy->u.isp24.srr_rx_id; nack->u.isp24.status = ntfy->u.isp24.status; nack->u.isp24.status_subcode = ntfy->u.isp24.status_subcode; + nack->u.isp24.fw_handle = ntfy->u.isp24.fw_handle; nack->u.isp24.exchange_address = ntfy->u.isp24.exchange_address; nack->u.isp24.srr_rel_offs = ntfy->u.isp24.srr_rel_offs; nack->u.isp24.srr_ui = ntfy->u.isp24.srr_ui; @@ -1570,7 +1571,7 @@ static inline uint32_t qlt_make_handle(struct scsi_qla_host *vha) /* always increment cmd handle */ do { ++h; - if (h > MAX_OUTSTANDING_COMMANDS) + if (h > DEFAULT_OUTSTANDING_COMMANDS) h = 1; /* 0 is QLA_TGT_NULL_HANDLE */ if (h == ha->tgt.current_handle) { ql_dbg(ql_dbg_tgt, vha, 0xe04e, @@ -2441,7 +2442,7 @@ static struct qla_tgt_cmd *qlt_ctio_to_cmd(struct scsi_qla_host *vha, return NULL; } /* handle-1 is actually used */ - if (unlikely(handle > MAX_OUTSTANDING_COMMANDS)) { + if (unlikely(handle > DEFAULT_OUTSTANDING_COMMANDS)) { ql_dbg(ql_dbg_tgt, vha, 0xe052, "qla_target(%d): Wrong handle %x received\n", vha->vp_idx, handle); @@ -4305,6 +4306,12 @@ int qlt_add_target(struct qla_hw_data *ha, struct scsi_qla_host *base_vha) if (!QLA_TGT_MODE_ENABLED()) return 0; + if (!IS_TGT_MODE_CAPABLE(ha)) { + ql_log(ql_log_warn, base_vha, 0xe070, + "This adapter does not support target mode.\n"); + return 0; + } + ql_dbg(ql_dbg_tgt, base_vha, 0xe03b, "Registering target for host %ld(%p)", base_vha->host_no, ha); @@ -4666,7 +4673,6 @@ void qlt_24xx_process_atio_queue(struct scsi_qla_host *vha) { struct qla_hw_data *ha = vha->hw; - struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; struct atio_from_isp *pkt; int cnt, i; @@ -4694,26 +4700,28 @@ qlt_24xx_process_atio_queue(struct scsi_qla_host *vha) } /* Adjust ring index */ - WRT_REG_DWORD(®->atio_q_out, ha->tgt.atio_ring_index); + WRT_REG_DWORD(ISP_ATIO_Q_OUT(vha), ha->tgt.atio_ring_index); } void -qlt_24xx_config_rings(struct scsi_qla_host *vha, device_reg_t __iomem *reg) +qlt_24xx_config_rings(struct scsi_qla_host *vha) { struct qla_hw_data *ha = vha->hw; + if (!QLA_TGT_MODE_ENABLED()) + return; -/* FIXME: atio_q in/out for ha->mqenable=1..? */ - if (ha->mqenable) { -#if 0 - WRT_REG_DWORD(®->isp25mq.atio_q_in, 0); - WRT_REG_DWORD(®->isp25mq.atio_q_out, 0); - RD_REG_DWORD(®->isp25mq.atio_q_out); -#endif - } else { - /* Setup APTIO registers for target mode */ - WRT_REG_DWORD(®->isp24.atio_q_in, 0); - WRT_REG_DWORD(®->isp24.atio_q_out, 0); - RD_REG_DWORD(®->isp24.atio_q_out); + WRT_REG_DWORD(ISP_ATIO_Q_IN(vha), 0); + WRT_REG_DWORD(ISP_ATIO_Q_OUT(vha), 0); + RD_REG_DWORD(ISP_ATIO_Q_OUT(vha)); + + if (IS_ATIO_MSIX_CAPABLE(ha)) { + struct qla_msix_entry *msix = &ha->msix_entries[2]; + struct init_cb_24xx *icb = (struct init_cb_24xx *)ha->init_cb; + + icb->msix_atio = cpu_to_le16(msix->entry); + ql_dbg(ql_dbg_init, vha, 0xf072, + "Registering ICB vector 0x%x for atio que.\n", + msix->entry); } } @@ -4796,6 +4804,101 @@ qlt_24xx_config_nvram_stage2(struct scsi_qla_host *vha, } } +void +qlt_81xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_81xx *nv) +{ + struct qla_hw_data *ha = vha->hw; + + if (!QLA_TGT_MODE_ENABLED()) + return; + + if (qla_tgt_mode_enabled(vha)) { + if (!ha->tgt.saved_set) { + /* We save only once */ + ha->tgt.saved_exchange_count = nv->exchange_count; + ha->tgt.saved_firmware_options_1 = + nv->firmware_options_1; + ha->tgt.saved_firmware_options_2 = + nv->firmware_options_2; + ha->tgt.saved_firmware_options_3 = + nv->firmware_options_3; + ha->tgt.saved_set = 1; + } + + nv->exchange_count = __constant_cpu_to_le16(0xFFFF); + + /* Enable target mode */ + nv->firmware_options_1 |= __constant_cpu_to_le32(BIT_4); + + /* Disable ini mode, if requested */ + if (!qla_ini_mode_enabled(vha)) + nv->firmware_options_1 |= + __constant_cpu_to_le32(BIT_5); + + /* Disable Full Login after LIP */ + nv->firmware_options_1 &= __constant_cpu_to_le32(~BIT_13); + /* Enable initial LIP */ + nv->firmware_options_1 &= __constant_cpu_to_le32(~BIT_9); + /* Enable FC tapes support */ + nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12); + /* Disable Full Login after LIP */ + nv->host_p &= __constant_cpu_to_le32(~BIT_10); + /* Enable target PRLI control */ + nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_14); + } else { + if (ha->tgt.saved_set) { + nv->exchange_count = ha->tgt.saved_exchange_count; + nv->firmware_options_1 = + ha->tgt.saved_firmware_options_1; + nv->firmware_options_2 = + ha->tgt.saved_firmware_options_2; + nv->firmware_options_3 = + ha->tgt.saved_firmware_options_3; + } + return; + } + + /* out-of-order frames reassembly */ + nv->firmware_options_3 |= BIT_6|BIT_9; + + if (ha->tgt.enable_class_2) { + if (vha->flags.init_done) + fc_host_supported_classes(vha->host) = + FC_COS_CLASS2 | FC_COS_CLASS3; + + nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_8); + } else { + if (vha->flags.init_done) + fc_host_supported_classes(vha->host) = FC_COS_CLASS3; + + nv->firmware_options_2 &= ~__constant_cpu_to_le32(BIT_8); + } +} + +void +qlt_81xx_config_nvram_stage2(struct scsi_qla_host *vha, + struct init_cb_81xx *icb) +{ + struct qla_hw_data *ha = vha->hw; + + if (!QLA_TGT_MODE_ENABLED()) + return; + + if (ha->tgt.node_name_set) { + memcpy(icb->node_name, ha->tgt.tgt_node_name, WWN_SIZE); + icb->firmware_options_1 |= __constant_cpu_to_le32(BIT_14); + } +} + +void +qlt_83xx_iospace_config(struct qla_hw_data *ha) +{ + if (!QLA_TGT_MODE_ENABLED()) + return; + + ha->msix_count += 1; /* For ATIO Q */ +} + int qlt_24xx_process_response_error(struct scsi_qla_host *vha, struct sts_entry_24xx *pkt) @@ -4828,11 +4931,41 @@ qlt_probe_one_stage1(struct scsi_qla_host *base_vha, struct qla_hw_data *ha) if (!QLA_TGT_MODE_ENABLED()) return; + if (ha->mqenable || IS_QLA83XX(ha)) { + ISP_ATIO_Q_IN(base_vha) = &ha->mqiobase->isp25mq.atio_q_in; + ISP_ATIO_Q_OUT(base_vha) = &ha->mqiobase->isp25mq.atio_q_out; + } else { + ISP_ATIO_Q_IN(base_vha) = &ha->iobase->isp24.atio_q_in; + ISP_ATIO_Q_OUT(base_vha) = &ha->iobase->isp24.atio_q_out; + } + mutex_init(&ha->tgt.tgt_mutex); mutex_init(&ha->tgt.tgt_host_action_mutex); qlt_clear_mode(base_vha); } +irqreturn_t +qla83xx_msix_atio_q(int irq, void *dev_id) +{ + struct rsp_que *rsp; + scsi_qla_host_t *vha; + struct qla_hw_data *ha; + unsigned long flags; + + rsp = (struct rsp_que *) dev_id; + ha = rsp->hw; + vha = pci_get_drvdata(ha->pdev); + + spin_lock_irqsave(&ha->hardware_lock, flags); + + qlt_24xx_process_atio_queue(vha); + qla24xx_process_response_queue(vha, rsp); + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + return IRQ_HANDLED; +} + int qlt_mem_alloc(struct qla_hw_data *ha) { diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index bad7495..ff9ccb9 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -60,8 +60,9 @@ * multi-complete should come to the tgt driver or be handled there by qla2xxx */ #define CTIO_COMPLETION_HANDLE_MARK BIT_29 -#if (CTIO_COMPLETION_HANDLE_MARK <= MAX_OUTSTANDING_COMMANDS) -#error "CTIO_COMPLETION_HANDLE_MARK not larger than MAX_OUTSTANDING_COMMANDS" +#if (CTIO_COMPLETION_HANDLE_MARK <= DEFAULT_OUTSTANDING_COMMANDS) +#error "CTIO_COMPLETION_HANDLE_MARK not larger than " + "DEFAULT_OUTSTANDING_COMMANDS" #endif #define HANDLE_IS_CTIO_COMP(h) (h & CTIO_COMPLETION_HANDLE_MARK) @@ -161,7 +162,7 @@ struct imm_ntfy_from_isp { uint16_t srr_rx_id; uint16_t status; uint8_t status_subcode; - uint8_t reserved_3; + uint8_t fw_handle; uint32_t exchange_address; uint32_t srr_rel_offs; uint16_t srr_ui; @@ -217,7 +218,7 @@ struct nack_to_isp { uint16_t srr_rx_id; uint16_t status; uint8_t status_subcode; - uint8_t reserved_3; + uint8_t fw_handle; uint32_t exchange_address; uint32_t srr_rel_offs; uint16_t srr_ui; @@ -948,6 +949,7 @@ extern void qlt_update_vp_map(struct scsi_qla_host *, int); * is not set. Right now, ha value is ignored. */ #define QLA_TGT_MODE_ENABLED() (ql2x_ini_mode != QLA2XXX_INI_MODE_ENABLED) +extern int ql2x_ini_mode; static inline bool qla_tgt_mode_enabled(struct scsi_qla_host *ha) { @@ -985,12 +987,15 @@ extern void qlt_vport_create(struct scsi_qla_host *, struct qla_hw_data *); extern void qlt_rff_id(struct scsi_qla_host *, struct ct_sns_req *); extern void qlt_init_atio_q_entries(struct scsi_qla_host *); extern void qlt_24xx_process_atio_queue(struct scsi_qla_host *); -extern void qlt_24xx_config_rings(struct scsi_qla_host *, - device_reg_t __iomem *); +extern void qlt_24xx_config_rings(struct scsi_qla_host *); extern void qlt_24xx_config_nvram_stage1(struct scsi_qla_host *, struct nvram_24xx *); extern void qlt_24xx_config_nvram_stage2(struct scsi_qla_host *, struct init_cb_24xx *); +extern void qlt_81xx_config_nvram_stage2(struct scsi_qla_host *, + struct init_cb_81xx *); +extern void qlt_81xx_config_nvram_stage1(struct scsi_qla_host *, + struct nvram_81xx *); extern int qlt_24xx_process_response_error(struct scsi_qla_host *, struct sts_entry_24xx *); extern void qlt_modify_vp_config(struct scsi_qla_host *, @@ -1000,5 +1005,7 @@ extern int qlt_mem_alloc(struct qla_hw_data *); extern void qlt_mem_free(struct qla_hw_data *); extern void qlt_stop_phase1(struct qla_tgt *); extern void qlt_stop_phase2(struct qla_tgt *); +extern irqreturn_t qla83xx_msix_atio_q(int, void *); +extern void qlt_83xx_iospace_config(struct qla_hw_data *); #endif /* __QLA_TARGET_H */ diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 49697ca..2b6e478 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2012 QLogic Corporation + * Copyright (c) 2003-2013 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 81e738d..160d336 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -1420,10 +1420,8 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password, dma_addr_t chap_dma; chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma); - if (chap_table == NULL) { - ret = -ENOMEM; - goto exit_get_chap; - } + if (chap_table == NULL) + return -ENOMEM; chap_size = sizeof(struct ql4_chap_table); memset(chap_table, 0, chap_size); diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 0144078..5dd6c49 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -201,6 +201,7 @@ enum storvsc_request_type { #define SRB_STATUS_AUTOSENSE_VALID 0x80 #define SRB_STATUS_INVALID_LUN 0x20 #define SRB_STATUS_SUCCESS 0x01 +#define SRB_STATUS_ABORTED 0x02 #define SRB_STATUS_ERROR 0x04 /* @@ -295,6 +296,25 @@ struct storvsc_scan_work { uint lun; }; +static void storvsc_device_scan(struct work_struct *work) +{ + struct storvsc_scan_work *wrk; + uint lun; + struct scsi_device *sdev; + + wrk = container_of(work, struct storvsc_scan_work, work); + lun = wrk->lun; + + sdev = scsi_device_lookup(wrk->host, 0, 0, lun); + if (!sdev) + goto done; + scsi_rescan_device(&sdev->sdev_gendev); + scsi_device_put(sdev); + +done: + kfree(wrk); +} + static void storvsc_bus_scan(struct work_struct *work) { struct storvsc_scan_work *wrk; @@ -467,6 +487,7 @@ static struct scatterlist *create_bounce_buffer(struct scatterlist *sgl, if (!bounce_sgl) return NULL; + sg_init_table(bounce_sgl, num_pages); for (i = 0; i < num_pages; i++) { page_buf = alloc_page(GFP_ATOMIC); if (!page_buf) @@ -760,6 +781,66 @@ cleanup: return ret; } +static void storvsc_handle_error(struct vmscsi_request *vm_srb, + struct scsi_cmnd *scmnd, + struct Scsi_Host *host, + u8 asc, u8 ascq) +{ + struct storvsc_scan_work *wrk; + void (*process_err_fn)(struct work_struct *work); + bool do_work = false; + + switch (vm_srb->srb_status) { + case SRB_STATUS_ERROR: + /* + * If there is an error; offline the device since all + * error recovery strategies would have already been + * deployed on the host side. However, if the command + * were a pass-through command deal with it appropriately. + */ + switch (scmnd->cmnd[0]) { + case ATA_16: + case ATA_12: + set_host_byte(scmnd, DID_PASSTHROUGH); + break; + default: + set_host_byte(scmnd, DID_TARGET_FAILURE); + } + break; + case SRB_STATUS_INVALID_LUN: + do_work = true; + process_err_fn = storvsc_remove_lun; + break; + case (SRB_STATUS_ABORTED | SRB_STATUS_AUTOSENSE_VALID): + if ((asc == 0x2a) && (ascq == 0x9)) { + do_work = true; + process_err_fn = storvsc_device_scan; + /* + * Retry the I/O that trigerred this. + */ + set_host_byte(scmnd, DID_REQUEUE); + } + break; + } + + if (!do_work) + return; + + /* + * We need to schedule work to process this error; schedule it. + */ + wrk = kmalloc(sizeof(struct storvsc_scan_work), GFP_ATOMIC); + if (!wrk) { + set_host_byte(scmnd, DID_TARGET_FAILURE); + return; + } + + wrk->host = host; + wrk->lun = vm_srb->lun; + INIT_WORK(&wrk->work, process_err_fn); + schedule_work(&wrk->work); +} + static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request) { @@ -768,8 +849,13 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request) void (*scsi_done_fn)(struct scsi_cmnd *); struct scsi_sense_hdr sense_hdr; struct vmscsi_request *vm_srb; - struct storvsc_scan_work *wrk; struct stor_mem_pools *memp = scmnd->device->hostdata; + struct Scsi_Host *host; + struct storvsc_device *stor_dev; + struct hv_device *dev = host_dev->dev; + + stor_dev = get_in_stor_device(dev); + host = stor_dev->host; vm_srb = &cmd_request->vstor_packet.vm_srb; if (cmd_request->bounce_sgl_count) { @@ -782,55 +868,18 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request) cmd_request->bounce_sgl_count); } - /* - * If there is an error; offline the device since all - * error recovery strategies would have already been - * deployed on the host side. However, if the command - * were a pass-through command deal with it appropriately. - */ scmnd->result = vm_srb->scsi_status; - if (vm_srb->srb_status == SRB_STATUS_ERROR) { - switch (scmnd->cmnd[0]) { - case ATA_16: - case ATA_12: - set_host_byte(scmnd, DID_PASSTHROUGH); - break; - default: - set_host_byte(scmnd, DID_TARGET_FAILURE); - } - } - - - /* - * If the LUN is invalid; remove the device. - */ - if (vm_srb->srb_status == SRB_STATUS_INVALID_LUN) { - struct storvsc_device *stor_dev; - struct hv_device *dev = host_dev->dev; - struct Scsi_Host *host; - - stor_dev = get_in_stor_device(dev); - host = stor_dev->host; - - wrk = kmalloc(sizeof(struct storvsc_scan_work), - GFP_ATOMIC); - if (!wrk) { - scmnd->result = DID_TARGET_FAILURE << 16; - } else { - wrk->host = host; - wrk->lun = vm_srb->lun; - INIT_WORK(&wrk->work, storvsc_remove_lun); - schedule_work(&wrk->work); - } - } - if (scmnd->result) { if (scsi_normalize_sense(scmnd->sense_buffer, SCSI_SENSE_BUFFERSIZE, &sense_hdr)) scsi_print_sense_hdr("storvsc", &sense_hdr); } + if (vm_srb->srb_status != SRB_STATUS_SUCCESS) + storvsc_handle_error(vm_srb, scmnd, host, sense_hdr.asc, + sense_hdr.ascq); + scsi_set_resid(scmnd, cmd_request->data_buffer.len - vm_srb->data_transfer_length); @@ -1155,6 +1204,8 @@ static int storvsc_device_configure(struct scsi_device *sdevice) blk_queue_bounce_limit(sdevice->request_queue, BLK_BOUNCE_ANY); + sdevice->no_write_same = 1; + return 0; } @@ -1237,6 +1288,8 @@ static bool storvsc_scsi_cmd_ok(struct scsi_cmnd *scmnd) u8 scsi_op = scmnd->cmnd[0]; switch (scsi_op) { + /* the host does not handle WRITE_SAME, log accident usage */ + case WRITE_SAME: /* * smartd sends this command and the host does not handle * this. So, don't send it. diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig index 8f27f9d..0371047 100644 --- a/drivers/scsi/ufs/Kconfig +++ b/drivers/scsi/ufs/Kconfig @@ -2,48 +2,58 @@ # Kernel configuration file for the UFS Host Controller # # This code is based on drivers/scsi/ufs/Kconfig -# Copyright (C) 2011 Samsung Samsung India Software Operations +# Copyright (C) 2011-2013 Samsung India Software Operations +# +# Authors: +# Santosh Yaraganavi +# Vinayak Holikatti # -# Santosh Yaraganavi -# Vinayak Holikatti - # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation; either version 2 # of the License, or (at your option) any later version. - +# See the COPYING file in the top-level directory or visit +# +# # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. +# +# This program is provided "AS IS" and "WITH ALL FAULTS" and +# without warranty of any kind. You are solely responsible for +# determining the appropriateness of using and distributing +# the program and assume all risks associated with your exercise +# of rights with respect to the program, including but not limited +# to infringement of third party rights, the risks and costs of +# program errors, damage to or loss of data, programs or equipment, +# and unavailability or interruption of operations. Under no +# circumstances will the contributor of this Program be liable for +# any damages of any kind arising from your use or distribution of +# this program. -# NO WARRANTY -# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR -# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT -# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, -# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is -# solely responsible for determining the appropriateness of using and -# distributing the Program and assumes all risks associated with its -# exercise of rights under this Agreement, including but not limited to -# the risks and costs of program errors, damage to or loss of data, -# programs or equipment, and unavailability or interruption of operations. - -# DISCLAIMER OF LIABILITY -# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY -# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND -# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR -# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED -# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES +config SCSI_UFSHCD + tristate "Universal Flash Storage Controller Driver Core" + depends on SCSI + ---help--- + This selects the support for UFS devices in Linux, say Y and make + sure that you know the name of your UFS host adapter (the card + inside your computer that "speaks" the UFS protocol, also + called UFS Host Controller), because you will be asked for it. + The module will be called ufshcd. -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, -# USA. + To compile this driver as a module, choose M here and read + . + However, do not compile this as a module if your root file system + (the one containing the directory /) is located on a UFS device. -config SCSI_UFSHCD - tristate "Universal Flash Storage host controller driver" - depends on PCI && SCSI +config SCSI_UFSHCD_PCI + tristate "PCI bus based UFS Controller support" + depends on SCSI_UFSHCD && PCI ---help--- - This is a generic driver which supports PCIe UFS Host controllers. + This selects the PCI UFS Host Controller Interface. Select this if + you have UFS Host Controller with PCI Interface. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile index adf7895..9eda0df 100644 --- a/drivers/scsi/ufs/Makefile +++ b/drivers/scsi/ufs/Makefile @@ -1,2 +1,3 @@ # UFSHCD makefile obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o +obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h index b207529..139bc06 100644 --- a/drivers/scsi/ufs/ufs.h +++ b/drivers/scsi/ufs/ufs.h @@ -2,45 +2,35 @@ * Universal Flash Storage Host controller driver * * This code is based on drivers/scsi/ufs/ufs.h - * Copyright (C) 2011-2012 Samsung India Software Operations + * Copyright (C) 2011-2013 Samsung India Software Operations * - * Santosh Yaraganavi - * Vinayak Holikatti + * Authors: + * Santosh Yaraganavi + * Vinayak Holikatti * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * NO WARRANTY - * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR - * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT - * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is - * solely responsible for determining the appropriateness of using and - * distributing the Program and assumes all risks associated with its - * exercise of rights under this Agreement, including but not limited to - * the risks and costs of program errors, damage to or loss of data, - * programs or equipment, and unavailability or interruption of operations. - - * DISCLAIMER OF LIABILITY - * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED - * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES - - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA. + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. */ #ifndef _UFS_H diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c new file mode 100644 index 0000000..5cb1d75 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -0,0 +1,211 @@ +/* + * Universal Flash Storage Host controller PCI glue driver + * + * This code is based on drivers/scsi/ufs/ufshcd-pci.c + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi + * Vinayak Holikatti + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#include "ufshcd.h" +#include + +#ifdef CONFIG_PM +/** + * ufshcd_pci_suspend - suspend power management function + * @pdev: pointer to PCI device handle + * @state: power state + * + * Returns -ENOSYS + */ +static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + /* + * TODO: + * 1. Call ufshcd_suspend + * 2. Do bus specific power management + */ + + return -ENOSYS; +} + +/** + * ufshcd_pci_resume - resume power management function + * @pdev: pointer to PCI device handle + * + * Returns -ENOSYS + */ +static int ufshcd_pci_resume(struct pci_dev *pdev) +{ + /* + * TODO: + * 1. Call ufshcd_resume. + * 2. Do bus specific wake up + */ + + return -ENOSYS; +} +#endif /* CONFIG_PM */ + +/** + * ufshcd_pci_shutdown - main function to put the controller in reset state + * @pdev: pointer to PCI device handle + */ +static void ufshcd_pci_shutdown(struct pci_dev *pdev) +{ + ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev)); +} + +/** + * ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space + * data structure memory + * @pdev - pointer to PCI handle + */ +static void ufshcd_pci_remove(struct pci_dev *pdev) +{ + struct ufs_hba *hba = pci_get_drvdata(pdev); + + disable_irq(pdev->irq); + free_irq(pdev->irq, hba); + ufshcd_remove(hba); + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + pci_clear_master(pdev); + pci_disable_device(pdev); +} + +/** + * ufshcd_set_dma_mask - Set dma mask based on the controller + * addressing capability + * @pdev: PCI device structure + * + * Returns 0 for success, non-zero for failure + */ +static int ufshcd_set_dma_mask(struct pci_dev *pdev) +{ + int err; + + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) + && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) + return 0; + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + return err; +} + +/** + * ufshcd_pci_probe - probe routine of the driver + * @pdev: pointer to PCI device handle + * @id: PCI device id + * + * Returns 0 on success, non-zero value on failure + */ +static int +ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct ufs_hba *hba; + void __iomem *mmio_base; + int err; + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "pci_enable_device failed\n"); + goto out_error; + } + + pci_set_master(pdev); + + + err = pci_request_regions(pdev, UFSHCD); + if (err < 0) { + dev_err(&pdev->dev, "request regions failed\n"); + goto out_disable; + } + + mmio_base = pci_ioremap_bar(pdev, 0); + if (!mmio_base) { + dev_err(&pdev->dev, "memory map failed\n"); + err = -ENOMEM; + goto out_release_regions; + } + + err = ufshcd_set_dma_mask(pdev); + if (err) { + dev_err(&pdev->dev, "set dma mask failed\n"); + goto out_iounmap; + } + + err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq); + if (err) { + dev_err(&pdev->dev, "Initialization failed\n"); + goto out_iounmap; + } + + pci_set_drvdata(pdev, hba); + + return 0; + +out_iounmap: + iounmap(mmio_base); +out_release_regions: + pci_release_regions(pdev); +out_disable: + pci_clear_master(pdev); + pci_disable_device(pdev); +out_error: + return err; +} + +static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = { + { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl); + +static struct pci_driver ufshcd_pci_driver = { + .name = UFSHCD, + .id_table = ufshcd_pci_tbl, + .probe = ufshcd_pci_probe, + .remove = ufshcd_pci_remove, + .shutdown = ufshcd_pci_shutdown, +#ifdef CONFIG_PM + .suspend = ufshcd_pci_suspend, + .resume = ufshcd_pci_resume, +#endif +}; + +module_pci_driver(ufshcd_pci_driver); + +MODULE_AUTHOR("Santosh Yaragnavi "); +MODULE_AUTHOR("Vinayak Holikatti "); +MODULE_DESCRIPTION("UFS host controller PCI glue driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UFSHCD_DRIVER_VERSION); diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 91a4046..60fd40c 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -1,77 +1,39 @@ /* - * Universal Flash Storage Host controller driver + * Universal Flash Storage Host controller driver Core * * This code is based on drivers/scsi/ufs/ufshcd.c - * Copyright (C) 2011-2012 Samsung India Software Operations + * Copyright (C) 2011-2013 Samsung India Software Operations * - * Santosh Yaraganavi - * Vinayak Holikatti + * Authors: + * Santosh Yaraganavi + * Vinayak Holikatti * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * NO WARRANTY - * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR - * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT - * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is - * solely responsible for determining the appropriateness of using and - * distributing the Program and assumes all risks associated with its - * exercise of rights under this Agreement, including but not limited to - * the risks and costs of program errors, damage to or loss of data, - * programs or equipment, and unavailability or interruption of operations. - - * DISCLAIMER OF LIABILITY - * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED - * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES - - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA. + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ufs.h" -#include "ufshci.h" - -#define UFSHCD "ufshcd" -#define UFSHCD_DRIVER_VERSION "0.1" +#include "ufshcd.h" enum { UFSHCD_MAX_CHANNEL = 0, @@ -102,121 +64,6 @@ enum { }; /** - * struct uic_command - UIC command structure - * @command: UIC command - * @argument1: UIC command argument 1 - * @argument2: UIC command argument 2 - * @argument3: UIC command argument 3 - * @cmd_active: Indicate if UIC command is outstanding - * @result: UIC command result - */ -struct uic_command { - u32 command; - u32 argument1; - u32 argument2; - u32 argument3; - int cmd_active; - int result; -}; - -/** - * struct ufs_hba - per adapter private structure - * @mmio_base: UFSHCI base register address - * @ucdl_base_addr: UFS Command Descriptor base address - * @utrdl_base_addr: UTP Transfer Request Descriptor base address - * @utmrdl_base_addr: UTP Task Management Descriptor base address - * @ucdl_dma_addr: UFS Command Descriptor DMA address - * @utrdl_dma_addr: UTRDL DMA address - * @utmrdl_dma_addr: UTMRDL DMA address - * @host: Scsi_Host instance of the driver - * @pdev: PCI device handle - * @lrb: local reference block - * @outstanding_tasks: Bits representing outstanding task requests - * @outstanding_reqs: Bits representing outstanding transfer requests - * @capabilities: UFS Controller Capabilities - * @nutrs: Transfer Request Queue depth supported by controller - * @nutmrs: Task Management Queue depth supported by controller - * @active_uic_cmd: handle of active UIC command - * @ufshcd_tm_wait_queue: wait queue for task management - * @tm_condition: condition variable for task management - * @ufshcd_state: UFSHCD states - * @int_enable_mask: Interrupt Mask Bits - * @uic_workq: Work queue for UIC completion handling - * @feh_workq: Work queue for fatal controller error handling - * @errors: HBA errors - */ -struct ufs_hba { - void __iomem *mmio_base; - - /* Virtual memory reference */ - struct utp_transfer_cmd_desc *ucdl_base_addr; - struct utp_transfer_req_desc *utrdl_base_addr; - struct utp_task_req_desc *utmrdl_base_addr; - - /* DMA memory reference */ - dma_addr_t ucdl_dma_addr; - dma_addr_t utrdl_dma_addr; - dma_addr_t utmrdl_dma_addr; - - struct Scsi_Host *host; - struct pci_dev *pdev; - - struct ufshcd_lrb *lrb; - - unsigned long outstanding_tasks; - unsigned long outstanding_reqs; - - u32 capabilities; - int nutrs; - int nutmrs; - u32 ufs_version; - - struct uic_command active_uic_cmd; - wait_queue_head_t ufshcd_tm_wait_queue; - unsigned long tm_condition; - - u32 ufshcd_state; - u32 int_enable_mask; - - /* Work Queues */ - struct work_struct uic_workq; - struct work_struct feh_workq; - - /* HBA Errors */ - u32 errors; -}; - -/** - * struct ufshcd_lrb - local reference block - * @utr_descriptor_ptr: UTRD address of the command - * @ucd_cmd_ptr: UCD address of the command - * @ucd_rsp_ptr: Response UPIU address for this command - * @ucd_prdt_ptr: PRDT address of the command - * @cmd: pointer to SCSI command - * @sense_buffer: pointer to sense buffer address of the SCSI command - * @sense_bufflen: Length of the sense buffer - * @scsi_status: SCSI status of the command - * @command_type: SCSI, UFS, Query. - * @task_tag: Task tag of the command - * @lun: LUN of the command - */ -struct ufshcd_lrb { - struct utp_transfer_req_desc *utr_descriptor_ptr; - struct utp_upiu_cmd *ucd_cmd_ptr; - struct utp_upiu_rsp *ucd_rsp_ptr; - struct ufshcd_sg_entry *ucd_prdt_ptr; - - struct scsi_cmnd *cmd; - u8 *sense_buffer; - unsigned int sense_bufflen; - int scsi_status; - - int command_type; - int task_tag; - unsigned int lun; -}; - -/** * ufshcd_get_ufs_version - Get the UFS version supported by the HBA * @hba - Pointer to adapter instance * @@ -335,21 +182,21 @@ static inline void ufshcd_free_hba_memory(struct ufs_hba *hba) if (hba->utmrdl_base_addr) { utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; - dma_free_coherent(&hba->pdev->dev, utmrdl_size, + dma_free_coherent(hba->dev, utmrdl_size, hba->utmrdl_base_addr, hba->utmrdl_dma_addr); } if (hba->utrdl_base_addr) { utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs); - dma_free_coherent(&hba->pdev->dev, utrdl_size, + dma_free_coherent(hba->dev, utrdl_size, hba->utrdl_base_addr, hba->utrdl_dma_addr); } if (hba->ucdl_base_addr) { ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); - dma_free_coherent(&hba->pdev->dev, ucdl_size, + dma_free_coherent(hba->dev, ucdl_size, hba->ucdl_base_addr, hba->ucdl_dma_addr); } } @@ -429,15 +276,6 @@ static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) } /** - * ufshcd_hba_stop - Send controller to reset state - * @hba: per adapter instance - */ -static inline void ufshcd_hba_stop(struct ufs_hba *hba) -{ - writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE)); -} - -/** * ufshcd_hba_start - Start controller initialization sequence * @hba: per adapter instance */ @@ -724,7 +562,7 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba) /* Allocate memory for UTP command descriptors */ ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); - hba->ucdl_base_addr = dma_alloc_coherent(&hba->pdev->dev, + hba->ucdl_base_addr = dma_alloc_coherent(hba->dev, ucdl_size, &hba->ucdl_dma_addr, GFP_KERNEL); @@ -737,7 +575,7 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba) */ if (!hba->ucdl_base_addr || WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) { - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "Command Descriptor Memory allocation failed\n"); goto out; } @@ -747,13 +585,13 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba) * UFSHCI requires 1024 byte alignment of UTRD */ utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs); - hba->utrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev, + hba->utrdl_base_addr = dma_alloc_coherent(hba->dev, utrdl_size, &hba->utrdl_dma_addr, GFP_KERNEL); if (!hba->utrdl_base_addr || WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) { - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "Transfer Descriptor Memory allocation failed\n"); goto out; } @@ -763,13 +601,13 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba) * UFSHCI requires 1024 byte alignment of UTMRD */ utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; - hba->utmrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev, + hba->utmrdl_base_addr = dma_alloc_coherent(hba->dev, utmrdl_size, &hba->utmrdl_dma_addr, GFP_KERNEL); if (!hba->utmrdl_base_addr || WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) { - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "Task Management Descriptor Memory allocation failed\n"); goto out; } @@ -777,7 +615,7 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba) /* Allocate memory for local reference block */ hba->lrb = kcalloc(hba->nutrs, sizeof(struct ufshcd_lrb), GFP_KERNEL); if (!hba->lrb) { - dev_err(&hba->pdev->dev, "LRB Memory allocation failed\n"); + dev_err(hba->dev, "LRB Memory allocation failed\n"); goto out; } return 0; @@ -867,7 +705,7 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba) /* check if controller is ready to accept UIC commands */ if (((readl(hba->mmio_base + REG_CONTROLLER_STATUS)) & UIC_COMMAND_READY) == 0x0) { - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "Controller not ready" " to accept UIC commands\n"); return -EIO; @@ -912,7 +750,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba) /* check if device present */ reg = readl((hba->mmio_base + REG_CONTROLLER_STATUS)); if (!ufshcd_is_device_present(reg)) { - dev_err(&hba->pdev->dev, "cc: Device not present\n"); + dev_err(hba->dev, "cc: Device not present\n"); err = -ENXIO; goto out; } @@ -924,7 +762,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba) if (!(ufshcd_get_lists_status(reg))) { ufshcd_enable_run_stop_reg(hba); } else { - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "Host controller not ready to process requests"); err = -EIO; goto out; @@ -1005,7 +843,7 @@ static int ufshcd_hba_enable(struct ufs_hba *hba) if (retry) { retry--; } else { - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "Controller enable failed\n"); return -EIO; } @@ -1084,7 +922,7 @@ static int ufshcd_do_reset(struct ufs_hba *hba) /* start the initialization process */ if (ufshcd_initialize_hba(hba)) { - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "Reset: Controller initialization failed\n"); return FAILED; } @@ -1167,7 +1005,7 @@ static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index) task_result = SUCCESS; } else { task_result = FAILED; - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "trc: Invalid ocs = %x\n", ocs_value); } spin_unlock_irqrestore(hba->host->host_lock, flags); @@ -1281,7 +1119,7 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) /* check if the returned transfer response is valid */ result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr); if (result) { - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "Invalid response = %x\n", result); break; } @@ -1310,7 +1148,7 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) case OCS_FATAL_ERROR: default: result |= DID_ERROR << 16; - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "OCS error from controller = %x\n", ocs); break; } /* end of switch */ @@ -1374,7 +1212,7 @@ static void ufshcd_uic_cc_handler (struct work_struct *work) !(ufshcd_get_uic_cmd_result(hba))) { if (ufshcd_make_hba_operational(hba)) - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "cc: hba not operational state\n"); return; } @@ -1509,7 +1347,7 @@ ufshcd_issue_tm_cmd(struct ufs_hba *hba, free_slot = ufshcd_get_tm_free_slot(hba); if (free_slot >= hba->nutmrs) { spin_unlock_irqrestore(host->host_lock, flags); - dev_err(&hba->pdev->dev, "Task management queue full\n"); + dev_err(hba->dev, "Task management queue full\n"); err = FAILED; goto out; } @@ -1552,7 +1390,7 @@ ufshcd_issue_tm_cmd(struct ufs_hba *hba, &hba->tm_condition) != 0), 60 * HZ); if (!err) { - dev_err(&hba->pdev->dev, + dev_err(hba->dev, "Task management command timed-out\n"); err = FAILED; goto out; @@ -1688,23 +1526,13 @@ static struct scsi_host_template ufshcd_driver_template = { }; /** - * ufshcd_shutdown - main function to put the controller in reset state - * @pdev: pointer to PCI device handle - */ -static void ufshcd_shutdown(struct pci_dev *pdev) -{ - ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev)); -} - -#ifdef CONFIG_PM -/** * ufshcd_suspend - suspend power management function - * @pdev: pointer to PCI device handle + * @hba: per adapter instance * @state: power state * * Returns -ENOSYS */ -static int ufshcd_suspend(struct pci_dev *pdev, pm_message_t state) +int ufshcd_suspend(struct ufs_hba *hba, pm_message_t state) { /* * TODO: @@ -1717,14 +1545,15 @@ static int ufshcd_suspend(struct pci_dev *pdev, pm_message_t state) return -ENOSYS; } +EXPORT_SYMBOL_GPL(ufshcd_suspend); /** * ufshcd_resume - resume power management function - * @pdev: pointer to PCI device handle + * @hba: per adapter instance * * Returns -ENOSYS */ -static int ufshcd_resume(struct pci_dev *pdev) +int ufshcd_resume(struct ufs_hba *hba) { /* * TODO: @@ -1737,7 +1566,7 @@ static int ufshcd_resume(struct pci_dev *pdev) return -ENOSYS; } -#endif /* CONFIG_PM */ +EXPORT_SYMBOL_GPL(ufshcd_resume); /** * ufshcd_hba_free - free allocated memory for @@ -1748,107 +1577,67 @@ static void ufshcd_hba_free(struct ufs_hba *hba) { iounmap(hba->mmio_base); ufshcd_free_hba_memory(hba); - pci_release_regions(hba->pdev); } /** - * ufshcd_remove - de-allocate PCI/SCSI host and host memory space + * ufshcd_remove - de-allocate SCSI host and host memory space * data structure memory - * @pdev - pointer to PCI handle + * @hba - per adapter instance */ -static void ufshcd_remove(struct pci_dev *pdev) +void ufshcd_remove(struct ufs_hba *hba) { - struct ufs_hba *hba = pci_get_drvdata(pdev); - /* disable interrupts */ ufshcd_int_config(hba, UFSHCD_INT_DISABLE); - free_irq(pdev->irq, hba); ufshcd_hba_stop(hba); ufshcd_hba_free(hba); scsi_remove_host(hba->host); scsi_host_put(hba->host); - pci_set_drvdata(pdev, NULL); - pci_clear_master(pdev); - pci_disable_device(pdev); -} - -/** - * ufshcd_set_dma_mask - Set dma mask based on the controller - * addressing capability - * @pdev: PCI device structure - * - * Returns 0 for success, non-zero for failure - */ -static int ufshcd_set_dma_mask(struct ufs_hba *hba) -{ - int err; - u64 dma_mask; - - /* - * If controller supports 64 bit addressing mode, then set the DMA - * mask to 64-bit, else set the DMA mask to 32-bit - */ - if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) - dma_mask = DMA_BIT_MASK(64); - else - dma_mask = DMA_BIT_MASK(32); - - err = pci_set_dma_mask(hba->pdev, dma_mask); - if (err) - return err; - - err = pci_set_consistent_dma_mask(hba->pdev, dma_mask); - - return err; } +EXPORT_SYMBOL_GPL(ufshcd_remove); /** - * ufshcd_probe - probe routine of the driver - * @pdev: pointer to PCI device handle - * @id: PCI device id - * + * ufshcd_init - Driver initialization routine + * @dev: pointer to device handle + * @hba_handle: driver private handle + * @mmio_base: base register address + * @irq: Interrupt line of device * Returns 0 on success, non-zero value on failure */ -static int ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id) +int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle, + void __iomem *mmio_base, unsigned int irq) { struct Scsi_Host *host; struct ufs_hba *hba; int err; - err = pci_enable_device(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_device failed\n"); + if (!dev) { + dev_err(dev, + "Invalid memory reference for dev is NULL\n"); + err = -ENODEV; goto out_error; } - pci_set_master(pdev); + if (!mmio_base) { + dev_err(dev, + "Invalid memory reference for mmio_base is NULL\n"); + err = -ENODEV; + goto out_error; + } host = scsi_host_alloc(&ufshcd_driver_template, sizeof(struct ufs_hba)); if (!host) { - dev_err(&pdev->dev, "scsi_host_alloc failed\n"); + dev_err(dev, "scsi_host_alloc failed\n"); err = -ENOMEM; - goto out_disable; + goto out_error; } hba = shost_priv(host); - - err = pci_request_regions(pdev, UFSHCD); - if (err < 0) { - dev_err(&pdev->dev, "request regions failed\n"); - goto out_host_put; - } - - hba->mmio_base = pci_ioremap_bar(pdev, 0); - if (!hba->mmio_base) { - dev_err(&pdev->dev, "memory map failed\n"); - err = -ENOMEM; - goto out_release_regions; - } - hba->host = host; - hba->pdev = pdev; + hba->dev = dev; + hba->mmio_base = mmio_base; + hba->irq = irq; /* Read capabilities registers */ ufshcd_hba_capabilities(hba); @@ -1856,17 +1645,11 @@ static int ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* Get UFS version supported by the controller */ hba->ufs_version = ufshcd_get_ufs_version(hba); - err = ufshcd_set_dma_mask(hba); - if (err) { - dev_err(&pdev->dev, "set dma mask failed\n"); - goto out_iounmap; - } - /* Allocate memory for host memory space */ err = ufshcd_memory_alloc(hba); if (err) { - dev_err(&pdev->dev, "Memory allocation failed\n"); - goto out_iounmap; + dev_err(hba->dev, "Memory allocation failed\n"); + goto out_disable; } /* Configure LRB */ @@ -1888,76 +1671,50 @@ static int ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id) INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler); /* IRQ registration */ - err = request_irq(pdev->irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); + err = request_irq(irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); if (err) { - dev_err(&pdev->dev, "request irq failed\n"); + dev_err(hba->dev, "request irq failed\n"); goto out_lrb_free; } /* Enable SCSI tag mapping */ err = scsi_init_shared_tag_map(host, host->can_queue); if (err) { - dev_err(&pdev->dev, "init shared queue failed\n"); + dev_err(hba->dev, "init shared queue failed\n"); goto out_free_irq; } - pci_set_drvdata(pdev, hba); - - err = scsi_add_host(host, &pdev->dev); + err = scsi_add_host(host, hba->dev); if (err) { - dev_err(&pdev->dev, "scsi_add_host failed\n"); + dev_err(hba->dev, "scsi_add_host failed\n"); goto out_free_irq; } /* Initialization routine */ err = ufshcd_initialize_hba(hba); if (err) { - dev_err(&pdev->dev, "Initialization failed\n"); - goto out_free_irq; + dev_err(hba->dev, "Initialization failed\n"); + goto out_remove_scsi_host; } + *hba_handle = hba; return 0; +out_remove_scsi_host: + scsi_remove_host(hba->host); out_free_irq: - free_irq(pdev->irq, hba); + free_irq(irq, hba); out_lrb_free: ufshcd_free_hba_memory(hba); -out_iounmap: - iounmap(hba->mmio_base); -out_release_regions: - pci_release_regions(pdev); -out_host_put: - scsi_host_put(host); out_disable: - pci_clear_master(pdev); - pci_disable_device(pdev); + scsi_host_put(host); out_error: return err; } +EXPORT_SYMBOL_GPL(ufshcd_init); -static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = { - { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { } /* terminate list */ -}; - -MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl); - -static struct pci_driver ufshcd_pci_driver = { - .name = UFSHCD, - .id_table = ufshcd_pci_tbl, - .probe = ufshcd_probe, - .remove = ufshcd_remove, - .shutdown = ufshcd_shutdown, -#ifdef CONFIG_PM - .suspend = ufshcd_suspend, - .resume = ufshcd_resume, -#endif -}; - -module_pci_driver(ufshcd_pci_driver); - -MODULE_AUTHOR("Santosh Yaragnavi , " - "Vinayak Holikatti "); -MODULE_DESCRIPTION("Generic UFS host controller driver"); +MODULE_AUTHOR("Santosh Yaragnavi "); +MODULE_AUTHOR("Vinayak Holikatti "); +MODULE_DESCRIPTION("Generic UFS host controller driver Core"); MODULE_LICENSE("GPL"); MODULE_VERSION(UFSHCD_DRIVER_VERSION); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h new file mode 100644 index 0000000..6b99a42 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd.h @@ -0,0 +1,202 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufshcd.h + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi + * Vinayak Holikatti + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#ifndef _UFSHCD_H +#define _UFSHCD_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ufs.h" +#include "ufshci.h" + +#define UFSHCD "ufshcd" +#define UFSHCD_DRIVER_VERSION "0.2" + +/** + * struct uic_command - UIC command structure + * @command: UIC command + * @argument1: UIC command argument 1 + * @argument2: UIC command argument 2 + * @argument3: UIC command argument 3 + * @cmd_active: Indicate if UIC command is outstanding + * @result: UIC command result + */ +struct uic_command { + u32 command; + u32 argument1; + u32 argument2; + u32 argument3; + int cmd_active; + int result; +}; + +/** + * struct ufshcd_lrb - local reference block + * @utr_descriptor_ptr: UTRD address of the command + * @ucd_cmd_ptr: UCD address of the command + * @ucd_rsp_ptr: Response UPIU address for this command + * @ucd_prdt_ptr: PRDT address of the command + * @cmd: pointer to SCSI command + * @sense_buffer: pointer to sense buffer address of the SCSI command + * @sense_bufflen: Length of the sense buffer + * @scsi_status: SCSI status of the command + * @command_type: SCSI, UFS, Query. + * @task_tag: Task tag of the command + * @lun: LUN of the command + */ +struct ufshcd_lrb { + struct utp_transfer_req_desc *utr_descriptor_ptr; + struct utp_upiu_cmd *ucd_cmd_ptr; + struct utp_upiu_rsp *ucd_rsp_ptr; + struct ufshcd_sg_entry *ucd_prdt_ptr; + + struct scsi_cmnd *cmd; + u8 *sense_buffer; + unsigned int sense_bufflen; + int scsi_status; + + int command_type; + int task_tag; + unsigned int lun; +}; + + +/** + * struct ufs_hba - per adapter private structure + * @mmio_base: UFSHCI base register address + * @ucdl_base_addr: UFS Command Descriptor base address + * @utrdl_base_addr: UTP Transfer Request Descriptor base address + * @utmrdl_base_addr: UTP Task Management Descriptor base address + * @ucdl_dma_addr: UFS Command Descriptor DMA address + * @utrdl_dma_addr: UTRDL DMA address + * @utmrdl_dma_addr: UTMRDL DMA address + * @host: Scsi_Host instance of the driver + * @dev: device handle + * @lrb: local reference block + * @outstanding_tasks: Bits representing outstanding task requests + * @outstanding_reqs: Bits representing outstanding transfer requests + * @capabilities: UFS Controller Capabilities + * @nutrs: Transfer Request Queue depth supported by controller + * @nutmrs: Task Management Queue depth supported by controller + * @ufs_version: UFS Version to which controller complies + * @irq: Irq number of the controller + * @active_uic_cmd: handle of active UIC command + * @ufshcd_tm_wait_queue: wait queue for task management + * @tm_condition: condition variable for task management + * @ufshcd_state: UFSHCD states + * @int_enable_mask: Interrupt Mask Bits + * @uic_workq: Work queue for UIC completion handling + * @feh_workq: Work queue for fatal controller error handling + * @errors: HBA errors + */ +struct ufs_hba { + void __iomem *mmio_base; + + /* Virtual memory reference */ + struct utp_transfer_cmd_desc *ucdl_base_addr; + struct utp_transfer_req_desc *utrdl_base_addr; + struct utp_task_req_desc *utmrdl_base_addr; + + /* DMA memory reference */ + dma_addr_t ucdl_dma_addr; + dma_addr_t utrdl_dma_addr; + dma_addr_t utmrdl_dma_addr; + + struct Scsi_Host *host; + struct device *dev; + + struct ufshcd_lrb *lrb; + + unsigned long outstanding_tasks; + unsigned long outstanding_reqs; + + u32 capabilities; + int nutrs; + int nutmrs; + u32 ufs_version; + unsigned int irq; + + struct uic_command active_uic_cmd; + wait_queue_head_t ufshcd_tm_wait_queue; + unsigned long tm_condition; + + u32 ufshcd_state; + u32 int_enable_mask; + + /* Work Queues */ + struct work_struct uic_workq; + struct work_struct feh_workq; + + /* HBA Errors */ + u32 errors; +}; + +int ufshcd_init(struct device *, struct ufs_hba ** , void __iomem * , + unsigned int); +void ufshcd_remove(struct ufs_hba *); + +/** + * ufshcd_hba_stop - Send controller to reset state + * @hba: per adapter instance + */ +static inline void ufshcd_hba_stop(struct ufs_hba *hba) +{ + writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE)); +} + +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h index 6e3510f..0c16484 100644 --- a/drivers/scsi/ufs/ufshci.h +++ b/drivers/scsi/ufs/ufshci.h @@ -2,45 +2,35 @@ * Universal Flash Storage Host controller driver * * This code is based on drivers/scsi/ufs/ufshci.h - * Copyright (C) 2011-2012 Samsung India Software Operations + * Copyright (C) 2011-2013 Samsung India Software Operations * - * Santosh Yaraganavi - * Vinayak Holikatti + * Authors: + * Santosh Yaraganavi + * Vinayak Holikatti * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * NO WARRANTY - * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR - * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT - * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is - * solely responsible for determining the appropriateness of using and - * distributing the Program and assumes all risks associated with its - * exercise of rights under this Agreement, including but not limited to - * the risks and costs of program errors, damage to or loss of data, - * programs or equipment, and unavailability or interruption of operations. - - * DISCLAIMER OF LIABILITY - * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED - * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES - - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA. + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. */ #ifndef _UFSHCI_H diff --git a/include/scsi/Kbuild b/include/scsi/Kbuild index f2b9491..562ff9d 100644 --- a/include/scsi/Kbuild +++ b/include/scsi/Kbuild @@ -1,4 +1 @@ -header-y += scsi_netlink.h -header-y += scsi_netlink_fc.h -header-y += scsi_bsg_fc.h header-y += fc/ diff --git a/include/scsi/fc/Kbuild b/include/scsi/fc/Kbuild index 5660381..e69de29 100644 --- a/include/scsi/fc/Kbuild +++ b/include/scsi/fc/Kbuild @@ -1,4 +0,0 @@ -header-y += fc_els.h -header-y += fc_fs.h -header-y += fc_gs.h -header-y += fc_ns.h diff --git a/include/scsi/fc/fc_els.h b/include/scsi/fc/fc_els.h deleted file mode 100644 index 481abbd..0000000 --- a/include/scsi/fc/fc_els.h +++ /dev/null @@ -1,831 +0,0 @@ -/* - * Copyright(c) 2007 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Maintained at www.Open-FCoE.org - */ - -#ifndef _FC_ELS_H_ -#define _FC_ELS_H_ - -#include - -/* - * Fibre Channel Switch - Enhanced Link Services definitions. - * From T11 FC-LS Rev 1.2 June 7, 2005. - */ - -/* - * ELS Command codes - byte 0 of the frame payload - */ -enum fc_els_cmd { - ELS_LS_RJT = 0x01, /* ESL reject */ - ELS_LS_ACC = 0x02, /* ESL Accept */ - ELS_PLOGI = 0x03, /* N_Port login */ - ELS_FLOGI = 0x04, /* F_Port login */ - ELS_LOGO = 0x05, /* Logout */ - ELS_ABTX = 0x06, /* Abort exchange - obsolete */ - ELS_RCS = 0x07, /* read connection status */ - ELS_RES = 0x08, /* read exchange status block */ - ELS_RSS = 0x09, /* read sequence status block */ - ELS_RSI = 0x0a, /* read sequence initiative */ - ELS_ESTS = 0x0b, /* establish streaming */ - ELS_ESTC = 0x0c, /* estimate credit */ - ELS_ADVC = 0x0d, /* advise credit */ - ELS_RTV = 0x0e, /* read timeout value */ - ELS_RLS = 0x0f, /* read link error status block */ - ELS_ECHO = 0x10, /* echo */ - ELS_TEST = 0x11, /* test */ - ELS_RRQ = 0x12, /* reinstate recovery qualifier */ - ELS_REC = 0x13, /* read exchange concise */ - ELS_SRR = 0x14, /* sequence retransmission request */ - ELS_PRLI = 0x20, /* process login */ - ELS_PRLO = 0x21, /* process logout */ - ELS_SCN = 0x22, /* state change notification */ - ELS_TPLS = 0x23, /* test process login state */ - ELS_TPRLO = 0x24, /* third party process logout */ - ELS_LCLM = 0x25, /* login control list mgmt (obs) */ - ELS_GAID = 0x30, /* get alias_ID */ - ELS_FACT = 0x31, /* fabric activate alias_id */ - ELS_FDACDT = 0x32, /* fabric deactivate alias_id */ - ELS_NACT = 0x33, /* N-port activate alias_id */ - ELS_NDACT = 0x34, /* N-port deactivate alias_id */ - ELS_QOSR = 0x40, /* quality of service request */ - ELS_RVCS = 0x41, /* read virtual circuit status */ - ELS_PDISC = 0x50, /* discover N_port service params */ - ELS_FDISC = 0x51, /* discover F_port service params */ - ELS_ADISC = 0x52, /* discover address */ - ELS_RNC = 0x53, /* report node cap (obs) */ - ELS_FARP_REQ = 0x54, /* FC ARP request */ - ELS_FARP_REPL = 0x55, /* FC ARP reply */ - ELS_RPS = 0x56, /* read port status block */ - ELS_RPL = 0x57, /* read port list */ - ELS_RPBC = 0x58, /* read port buffer condition */ - ELS_FAN = 0x60, /* fabric address notification */ - ELS_RSCN = 0x61, /* registered state change notification */ - ELS_SCR = 0x62, /* state change registration */ - ELS_RNFT = 0x63, /* report node FC-4 types */ - ELS_CSR = 0x68, /* clock synch. request */ - ELS_CSU = 0x69, /* clock synch. update */ - ELS_LINIT = 0x70, /* loop initialize */ - ELS_LSTS = 0x72, /* loop status */ - ELS_RNID = 0x78, /* request node ID data */ - ELS_RLIR = 0x79, /* registered link incident report */ - ELS_LIRR = 0x7a, /* link incident record registration */ - ELS_SRL = 0x7b, /* scan remote loop */ - ELS_SBRP = 0x7c, /* set bit-error reporting params */ - ELS_RPSC = 0x7d, /* report speed capabilities */ - ELS_QSA = 0x7e, /* query security attributes */ - ELS_EVFP = 0x7f, /* exchange virt. fabrics params */ - ELS_LKA = 0x80, /* link keep-alive */ - ELS_AUTH_ELS = 0x90, /* authentication ELS */ -}; - -/* - * Initializer useful for decoding table. - * Please keep this in sync with the above definitions. - */ -#define FC_ELS_CMDS_INIT { \ - [ELS_LS_RJT] = "LS_RJT", \ - [ELS_LS_ACC] = "LS_ACC", \ - [ELS_PLOGI] = "PLOGI", \ - [ELS_FLOGI] = "FLOGI", \ - [ELS_LOGO] = "LOGO", \ - [ELS_ABTX] = "ABTX", \ - [ELS_RCS] = "RCS", \ - [ELS_RES] = "RES", \ - [ELS_RSS] = "RSS", \ - [ELS_RSI] = "RSI", \ - [ELS_ESTS] = "ESTS", \ - [ELS_ESTC] = "ESTC", \ - [ELS_ADVC] = "ADVC", \ - [ELS_RTV] = "RTV", \ - [ELS_RLS] = "RLS", \ - [ELS_ECHO] = "ECHO", \ - [ELS_TEST] = "TEST", \ - [ELS_RRQ] = "RRQ", \ - [ELS_REC] = "REC", \ - [ELS_SRR] = "SRR", \ - [ELS_PRLI] = "PRLI", \ - [ELS_PRLO] = "PRLO", \ - [ELS_SCN] = "SCN", \ - [ELS_TPLS] = "TPLS", \ - [ELS_TPRLO] = "TPRLO", \ - [ELS_LCLM] = "LCLM", \ - [ELS_GAID] = "GAID", \ - [ELS_FACT] = "FACT", \ - [ELS_FDACDT] = "FDACDT", \ - [ELS_NACT] = "NACT", \ - [ELS_NDACT] = "NDACT", \ - [ELS_QOSR] = "QOSR", \ - [ELS_RVCS] = "RVCS", \ - [ELS_PDISC] = "PDISC", \ - [ELS_FDISC] = "FDISC", \ - [ELS_ADISC] = "ADISC", \ - [ELS_RNC] = "RNC", \ - [ELS_FARP_REQ] = "FARP_REQ", \ - [ELS_FARP_REPL] = "FARP_REPL", \ - [ELS_RPS] = "RPS", \ - [ELS_RPL] = "RPL", \ - [ELS_RPBC] = "RPBC", \ - [ELS_FAN] = "FAN", \ - [ELS_RSCN] = "RSCN", \ - [ELS_SCR] = "SCR", \ - [ELS_RNFT] = "RNFT", \ - [ELS_CSR] = "CSR", \ - [ELS_CSU] = "CSU", \ - [ELS_LINIT] = "LINIT", \ - [ELS_LSTS] = "LSTS", \ - [ELS_RNID] = "RNID", \ - [ELS_RLIR] = "RLIR", \ - [ELS_LIRR] = "LIRR", \ - [ELS_SRL] = "SRL", \ - [ELS_SBRP] = "SBRP", \ - [ELS_RPSC] = "RPSC", \ - [ELS_QSA] = "QSA", \ - [ELS_EVFP] = "EVFP", \ - [ELS_LKA] = "LKA", \ - [ELS_AUTH_ELS] = "AUTH_ELS", \ -} - -/* - * LS_ACC payload. - */ -struct fc_els_ls_acc { - __u8 la_cmd; /* command code ELS_LS_ACC */ - __u8 la_resv[3]; /* reserved */ -}; - -/* - * ELS reject payload. - */ -struct fc_els_ls_rjt { - __u8 er_cmd; /* command code ELS_LS_RJT */ - __u8 er_resv[4]; /* reserved must be zero */ - __u8 er_reason; /* reason (enum fc_els_rjt_reason below) */ - __u8 er_explan; /* explanation (enum fc_els_rjt_explan below) */ - __u8 er_vendor; /* vendor specific code */ -}; - -/* - * ELS reject reason codes (er_reason). - */ -enum fc_els_rjt_reason { - ELS_RJT_NONE = 0, /* no reject - not to be sent */ - ELS_RJT_INVAL = 0x01, /* invalid ELS command code */ - ELS_RJT_LOGIC = 0x03, /* logical error */ - ELS_RJT_BUSY = 0x05, /* logical busy */ - ELS_RJT_PROT = 0x07, /* protocol error */ - ELS_RJT_UNAB = 0x09, /* unable to perform command request */ - ELS_RJT_UNSUP = 0x0b, /* command not supported */ - ELS_RJT_INPROG = 0x0e, /* command already in progress */ - ELS_RJT_FIP = 0x20, /* FIP error */ - ELS_RJT_VENDOR = 0xff, /* vendor specific error */ -}; - - -/* - * reason code explanation (er_explan). - */ -enum fc_els_rjt_explan { - ELS_EXPL_NONE = 0x00, /* No additional explanation */ - ELS_EXPL_SPP_OPT_ERR = 0x01, /* service parameter error - options */ - ELS_EXPL_SPP_ICTL_ERR = 0x03, /* service parm error - initiator ctl */ - ELS_EXPL_AH = 0x11, /* invalid association header */ - ELS_EXPL_AH_REQ = 0x13, /* association_header required */ - ELS_EXPL_SID = 0x15, /* invalid originator S_ID */ - ELS_EXPL_OXID_RXID = 0x17, /* invalid OX_ID-RX_ID combination */ - ELS_EXPL_INPROG = 0x19, /* Request already in progress */ - ELS_EXPL_PLOGI_REQD = 0x1e, /* N_Port login required */ - ELS_EXPL_INSUF_RES = 0x29, /* insufficient resources */ - ELS_EXPL_UNAB_DATA = 0x2a, /* unable to supply requested data */ - ELS_EXPL_UNSUPR = 0x2c, /* Request not supported */ - ELS_EXPL_INV_LEN = 0x2d, /* Invalid payload length */ - ELS_EXPL_NOT_NEIGHBOR = 0x62, /* VN2VN_Port not in neighbor set */ - /* TBD - above definitions incomplete */ -}; - -/* - * Common service parameters (N ports). - */ -struct fc_els_csp { - __u8 sp_hi_ver; /* highest version supported (obs.) */ - __u8 sp_lo_ver; /* highest version supported (obs.) */ - __be16 sp_bb_cred; /* buffer-to-buffer credits */ - __be16 sp_features; /* common feature flags */ - __be16 sp_bb_data; /* b-b state number and data field sz */ - union { - struct { - __be16 _sp_tot_seq; /* total concurrent sequences */ - __be16 _sp_rel_off; /* rel. offset by info cat */ - } sp_plogi; - struct { - __be32 _sp_r_a_tov; /* resource alloc. timeout msec */ - } sp_flogi_acc; - } sp_u; - __be32 sp_e_d_tov; /* error detect timeout value */ -}; -#define sp_tot_seq sp_u.sp_plogi._sp_tot_seq -#define sp_rel_off sp_u.sp_plogi._sp_rel_off -#define sp_r_a_tov sp_u.sp_flogi_acc._sp_r_a_tov - -#define FC_SP_BB_DATA_MASK 0xfff /* mask for data field size in sp_bb_data */ - -/* - * Minimum and maximum values for max data field size in service parameters. - */ -#define FC_SP_MIN_MAX_PAYLOAD FC_MIN_MAX_PAYLOAD -#define FC_SP_MAX_MAX_PAYLOAD FC_MAX_PAYLOAD - -/* - * sp_features - */ -#define FC_SP_FT_NPIV 0x8000 /* multiple N_Port_ID support (FLOGI) */ -#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel off (PLOGI) */ -#define FC_SP_FT_CLAD 0x8000 /* clean address (in FLOGI LS_ACC) */ -#define FC_SP_FT_RAND 0x4000 /* random relative offset */ -#define FC_SP_FT_VAL 0x2000 /* valid vendor version level */ -#define FC_SP_FT_NPIV_ACC 0x2000 /* NPIV assignment (FLOGI LS_ACC) */ -#define FC_SP_FT_FPORT 0x1000 /* F port (1) vs. N port (0) */ -#define FC_SP_FT_ABB 0x0800 /* alternate BB_credit management */ -#define FC_SP_FT_EDTR 0x0400 /* E_D_TOV Resolution is nanoseconds */ -#define FC_SP_FT_MCAST 0x0200 /* multicast */ -#define FC_SP_FT_BCAST 0x0100 /* broadcast */ -#define FC_SP_FT_HUNT 0x0080 /* hunt group */ -#define FC_SP_FT_SIMP 0x0040 /* dedicated simplex */ -#define FC_SP_FT_SEC 0x0020 /* reserved for security */ -#define FC_SP_FT_CSYN 0x0010 /* clock synch. supported */ -#define FC_SP_FT_RTTOV 0x0008 /* R_T_TOV value 100 uS, else 100 mS */ -#define FC_SP_FT_HALF 0x0004 /* dynamic half duplex */ -#define FC_SP_FT_SEQC 0x0002 /* SEQ_CNT */ -#define FC_SP_FT_PAYL 0x0001 /* FLOGI payload length 256, else 116 */ - -/* - * Class-specific service parameters. - */ -struct fc_els_cssp { - __be16 cp_class; /* class flags */ - __be16 cp_init; /* initiator flags */ - __be16 cp_recip; /* recipient flags */ - __be16 cp_rdfs; /* receive data field size */ - __be16 cp_con_seq; /* concurrent sequences */ - __be16 cp_ee_cred; /* N-port end-to-end credit */ - __u8 cp_resv1; /* reserved */ - __u8 cp_open_seq; /* open sequences per exchange */ - __u8 _cp_resv2[2]; /* reserved */ -}; - -/* - * cp_class flags. - */ -#define FC_CPC_VALID 0x8000 /* class valid */ -#define FC_CPC_IMIX 0x4000 /* intermix mode */ -#define FC_CPC_SEQ 0x0800 /* sequential delivery */ -#define FC_CPC_CAMP 0x0200 /* camp-on */ -#define FC_CPC_PRI 0x0080 /* priority */ - -/* - * cp_init flags. - * (TBD: not all flags defined here). - */ -#define FC_CPI_CSYN 0x0010 /* clock synch. capable */ - -/* - * cp_recip flags. - */ -#define FC_CPR_CSYN 0x0008 /* clock synch. capable */ - -/* - * NFC_ELS_FLOGI: Fabric login request. - * NFC_ELS_PLOGI: Port login request (same format). - */ -struct fc_els_flogi { - __u8 fl_cmd; /* command */ - __u8 _fl_resvd[3]; /* must be zero */ - struct fc_els_csp fl_csp; /* common service parameters */ - __be64 fl_wwpn; /* port name */ - __be64 fl_wwnn; /* node name */ - struct fc_els_cssp fl_cssp[4]; /* class 1-4 service parameters */ - __u8 fl_vend[16]; /* vendor version level */ -} __attribute__((__packed__)); - -/* - * Process login service parameter page. - */ -struct fc_els_spp { - __u8 spp_type; /* type code or common service params */ - __u8 spp_type_ext; /* type code extension */ - __u8 spp_flags; - __u8 _spp_resvd; - __be32 spp_orig_pa; /* originator process associator */ - __be32 spp_resp_pa; /* responder process associator */ - __be32 spp_params; /* service parameters */ -}; - -/* - * spp_flags. - */ -#define FC_SPP_OPA_VAL 0x80 /* originator proc. assoc. valid */ -#define FC_SPP_RPA_VAL 0x40 /* responder proc. assoc. valid */ -#define FC_SPP_EST_IMG_PAIR 0x20 /* establish image pair */ -#define FC_SPP_RESP_MASK 0x0f /* mask for response code (below) */ - -/* - * SPP response code in spp_flags - lower 4 bits. - */ -enum fc_els_spp_resp { - FC_SPP_RESP_ACK = 1, /* request executed */ - FC_SPP_RESP_RES = 2, /* unable due to lack of resources */ - FC_SPP_RESP_INIT = 3, /* initialization not complete */ - FC_SPP_RESP_NO_PA = 4, /* unknown process associator */ - FC_SPP_RESP_CONF = 5, /* configuration precludes image pair */ - FC_SPP_RESP_COND = 6, /* request completed conditionally */ - FC_SPP_RESP_MULT = 7, /* unable to handle multiple SPPs */ - FC_SPP_RESP_INVL = 8, /* SPP is invalid */ -}; - -/* - * ELS_RRQ - Reinstate Recovery Qualifier - */ -struct fc_els_rrq { - __u8 rrq_cmd; /* command (0x12) */ - __u8 rrq_zero[3]; /* specified as zero - part of cmd */ - __u8 rrq_resvd; /* reserved */ - __u8 rrq_s_id[3]; /* originator FID */ - __be16 rrq_ox_id; /* originator exchange ID */ - __be16 rrq_rx_id; /* responders exchange ID */ -}; - -/* - * ELS_REC - Read exchange concise. - */ -struct fc_els_rec { - __u8 rec_cmd; /* command (0x13) */ - __u8 rec_zero[3]; /* specified as zero - part of cmd */ - __u8 rec_resvd; /* reserved */ - __u8 rec_s_id[3]; /* originator FID */ - __be16 rec_ox_id; /* originator exchange ID */ - __be16 rec_rx_id; /* responders exchange ID */ -}; - -/* - * ELS_REC LS_ACC payload. - */ -struct fc_els_rec_acc { - __u8 reca_cmd; /* accept (0x02) */ - __u8 reca_zero[3]; /* specified as zero - part of cmd */ - __be16 reca_ox_id; /* originator exchange ID */ - __be16 reca_rx_id; /* responders exchange ID */ - __u8 reca_resvd1; /* reserved */ - __u8 reca_ofid[3]; /* originator FID */ - __u8 reca_resvd2; /* reserved */ - __u8 reca_rfid[3]; /* responder FID */ - __be32 reca_fc4value; /* FC4 value */ - __be32 reca_e_stat; /* ESB (exchange status block) status */ -}; - -/* - * ELS_PRLI - Process login request and response. - */ -struct fc_els_prli { - __u8 prli_cmd; /* command */ - __u8 prli_spp_len; /* length of each serv. parm. page */ - __be16 prli_len; /* length of entire payload */ - /* service parameter pages follow */ -}; - -/* - * ELS_PRLO - Process logout request and response. - */ -struct fc_els_prlo { - __u8 prlo_cmd; /* command */ - __u8 prlo_obs; /* obsolete, but shall be set to 10h */ - __be16 prlo_len; /* payload length */ -}; - -/* - * ELS_ADISC payload - */ -struct fc_els_adisc { - __u8 adisc_cmd; - __u8 adisc_resv[3]; - __u8 adisc_resv1; - __u8 adisc_hard_addr[3]; - __be64 adisc_wwpn; - __be64 adisc_wwnn; - __u8 adisc_resv2; - __u8 adisc_port_id[3]; -} __attribute__((__packed__)); - -/* - * ELS_LOGO - process or fabric logout. - */ -struct fc_els_logo { - __u8 fl_cmd; /* command code */ - __u8 fl_zero[3]; /* specified as zero - part of cmd */ - __u8 fl_resvd; /* reserved */ - __u8 fl_n_port_id[3];/* N port ID */ - __be64 fl_n_port_wwn; /* port name */ -}; - -/* - * ELS_RTV - read timeout value. - */ -struct fc_els_rtv { - __u8 rtv_cmd; /* command code 0x0e */ - __u8 rtv_zero[3]; /* specified as zero - part of cmd */ -}; - -/* - * LS_ACC for ELS_RTV - read timeout value. - */ -struct fc_els_rtv_acc { - __u8 rtv_cmd; /* command code 0x02 */ - __u8 rtv_zero[3]; /* specified as zero - part of cmd */ - __be32 rtv_r_a_tov; /* resource allocation timeout value */ - __be32 rtv_e_d_tov; /* error detection timeout value */ - __be32 rtv_toq; /* timeout qualifier (see below) */ -}; - -/* - * rtv_toq bits. - */ -#define FC_ELS_RTV_EDRES (1 << 26) /* E_D_TOV resolution is nS else mS */ -#define FC_ELS_RTV_RTTOV (1 << 19) /* R_T_TOV is 100 uS else 100 mS */ - -/* - * ELS_SCR - state change registration payload. - */ -struct fc_els_scr { - __u8 scr_cmd; /* command code */ - __u8 scr_resv[6]; /* reserved */ - __u8 scr_reg_func; /* registration function (see below) */ -}; - -enum fc_els_scr_func { - ELS_SCRF_FAB = 1, /* fabric-detected registration */ - ELS_SCRF_NPORT = 2, /* Nx_Port-detected registration */ - ELS_SCRF_FULL = 3, /* full registration */ - ELS_SCRF_CLEAR = 255, /* remove any current registrations */ -}; - -/* - * ELS_RSCN - registered state change notification payload. - */ -struct fc_els_rscn { - __u8 rscn_cmd; /* RSCN opcode (0x61) */ - __u8 rscn_page_len; /* page length (4) */ - __be16 rscn_plen; /* payload length including this word */ - - /* followed by 4-byte generic affected Port_ID pages */ -}; - -struct fc_els_rscn_page { - __u8 rscn_page_flags; /* event and address format */ - __u8 rscn_fid[3]; /* fabric ID */ -}; - -#define ELS_RSCN_EV_QUAL_BIT 2 /* shift count for event qualifier */ -#define ELS_RSCN_EV_QUAL_MASK 0xf /* mask for event qualifier */ -#define ELS_RSCN_ADDR_FMT_BIT 0 /* shift count for address format */ -#define ELS_RSCN_ADDR_FMT_MASK 0x3 /* mask for address format */ - -enum fc_els_rscn_ev_qual { - ELS_EV_QUAL_NONE = 0, /* unspecified */ - ELS_EV_QUAL_NS_OBJ = 1, /* changed name server object */ - ELS_EV_QUAL_PORT_ATTR = 2, /* changed port attribute */ - ELS_EV_QUAL_SERV_OBJ = 3, /* changed service object */ - ELS_EV_QUAL_SW_CONFIG = 4, /* changed switch configuration */ - ELS_EV_QUAL_REM_OBJ = 5, /* removed object */ -}; - -enum fc_els_rscn_addr_fmt { - ELS_ADDR_FMT_PORT = 0, /* rscn_fid is a port address */ - ELS_ADDR_FMT_AREA = 1, /* rscn_fid is a area address */ - ELS_ADDR_FMT_DOM = 2, /* rscn_fid is a domain address */ - ELS_ADDR_FMT_FAB = 3, /* anything on fabric may have changed */ -}; - -/* - * ELS_RNID - request Node ID. - */ -struct fc_els_rnid { - __u8 rnid_cmd; /* RNID opcode (0x78) */ - __u8 rnid_resv[3]; /* reserved */ - __u8 rnid_fmt; /* data format */ - __u8 rnid_resv2[3]; /* reserved */ -}; - -/* - * Node Identification Data formats (rnid_fmt) - */ -enum fc_els_rnid_fmt { - ELS_RNIDF_NONE = 0, /* no specific identification data */ - ELS_RNIDF_GEN = 0xdf, /* general topology discovery format */ -}; - -/* - * ELS_RNID response. - */ -struct fc_els_rnid_resp { - __u8 rnid_cmd; /* response code (LS_ACC) */ - __u8 rnid_resv[3]; /* reserved */ - __u8 rnid_fmt; /* data format */ - __u8 rnid_cid_len; /* common ID data length */ - __u8 rnid_resv2; /* reserved */ - __u8 rnid_sid_len; /* specific ID data length */ -}; - -struct fc_els_rnid_cid { - __be64 rnid_wwpn; /* N port name */ - __be64 rnid_wwnn; /* node name */ -}; - -struct fc_els_rnid_gen { - __u8 rnid_vend_id[16]; /* vendor-unique ID */ - __be32 rnid_atype; /* associated type (see below) */ - __be32 rnid_phys_port; /* physical port number */ - __be32 rnid_att_nodes; /* number of attached nodes */ - __u8 rnid_node_mgmt; /* node management (see below) */ - __u8 rnid_ip_ver; /* IP version (see below) */ - __be16 rnid_prot_port; /* UDP / TCP port number */ - __be32 rnid_ip_addr[4]; /* IP address */ - __u8 rnid_resvd[2]; /* reserved */ - __be16 rnid_vend_spec; /* vendor-specific field */ -}; - -enum fc_els_rnid_atype { - ELS_RNIDA_UNK = 0x01, /* unknown */ - ELS_RNIDA_OTHER = 0x02, /* none of the following */ - ELS_RNIDA_HUB = 0x03, - ELS_RNIDA_SWITCH = 0x04, - ELS_RNIDA_GATEWAY = 0x05, - ELS_RNIDA_CONV = 0x06, /* Obsolete, do not use this value */ - ELS_RNIDA_HBA = 0x07, /* Obsolete, do not use this value */ - ELS_RNIDA_PROXY = 0x08, /* Obsolete, do not use this value */ - ELS_RNIDA_STORAGE = 0x09, - ELS_RNIDA_HOST = 0x0a, - ELS_RNIDA_SUBSYS = 0x0b, /* storage subsystem (e.g., RAID) */ - ELS_RNIDA_ACCESS = 0x0e, /* access device (e.g. media changer) */ - ELS_RNIDA_NAS = 0x11, /* NAS server */ - ELS_RNIDA_BRIDGE = 0x12, /* bridge */ - ELS_RNIDA_VIRT = 0x13, /* virtualization device */ - ELS_RNIDA_MF = 0xff, /* multifunction device (bits below) */ - ELS_RNIDA_MF_HUB = 1UL << 31, /* hub */ - ELS_RNIDA_MF_SW = 1UL << 30, /* switch */ - ELS_RNIDA_MF_GW = 1UL << 29, /* gateway */ - ELS_RNIDA_MF_ST = 1UL << 28, /* storage */ - ELS_RNIDA_MF_HOST = 1UL << 27, /* host */ - ELS_RNIDA_MF_SUB = 1UL << 26, /* storage subsystem */ - ELS_RNIDA_MF_ACC = 1UL << 25, /* storage access dev */ - ELS_RNIDA_MF_WDM = 1UL << 24, /* wavelength division mux */ - ELS_RNIDA_MF_NAS = 1UL << 23, /* NAS server */ - ELS_RNIDA_MF_BR = 1UL << 22, /* bridge */ - ELS_RNIDA_MF_VIRT = 1UL << 21, /* virtualization device */ -}; - -enum fc_els_rnid_mgmt { - ELS_RNIDM_SNMP = 0, - ELS_RNIDM_TELNET = 1, - ELS_RNIDM_HTTP = 2, - ELS_RNIDM_HTTPS = 3, - ELS_RNIDM_XML = 4, /* HTTP + XML */ -}; - -enum fc_els_rnid_ipver { - ELS_RNIDIP_NONE = 0, /* no IP support or node mgmt. */ - ELS_RNIDIP_V4 = 1, /* IPv4 */ - ELS_RNIDIP_V6 = 2, /* IPv6 */ -}; - -/* - * ELS RPL - Read Port List. - */ -struct fc_els_rpl { - __u8 rpl_cmd; /* command */ - __u8 rpl_resv[5]; /* reserved - must be zero */ - __be16 rpl_max_size; /* maximum response size or zero */ - __u8 rpl_resv1; /* reserved - must be zero */ - __u8 rpl_index[3]; /* starting index */ -}; - -/* - * Port number block in RPL response. - */ -struct fc_els_pnb { - __be32 pnb_phys_pn; /* physical port number */ - __u8 pnb_resv; /* reserved */ - __u8 pnb_port_id[3]; /* port ID */ - __be64 pnb_wwpn; /* port name */ -}; - -/* - * RPL LS_ACC response. - */ -struct fc_els_rpl_resp { - __u8 rpl_cmd; /* ELS_LS_ACC */ - __u8 rpl_resv1; /* reserved - must be zero */ - __be16 rpl_plen; /* payload length */ - __u8 rpl_resv2; /* reserved - must be zero */ - __u8 rpl_llen[3]; /* list length */ - __u8 rpl_resv3; /* reserved - must be zero */ - __u8 rpl_index[3]; /* starting index */ - struct fc_els_pnb rpl_pnb[1]; /* variable number of PNBs */ -}; - -/* - * Link Error Status Block. - */ -struct fc_els_lesb { - __be32 lesb_link_fail; /* link failure count */ - __be32 lesb_sync_loss; /* loss of synchronization count */ - __be32 lesb_sig_loss; /* loss of signal count */ - __be32 lesb_prim_err; /* primitive sequence error count */ - __be32 lesb_inv_word; /* invalid transmission word count */ - __be32 lesb_inv_crc; /* invalid CRC count */ -}; - -/* - * ELS RPS - Read Port Status Block request. - */ -struct fc_els_rps { - __u8 rps_cmd; /* command */ - __u8 rps_resv[2]; /* reserved - must be zero */ - __u8 rps_flag; /* flag - see below */ - __be64 rps_port_spec; /* port selection */ -}; - -enum fc_els_rps_flag { - FC_ELS_RPS_DID = 0x00, /* port identified by D_ID of req. */ - FC_ELS_RPS_PPN = 0x01, /* port_spec is physical port number */ - FC_ELS_RPS_WWPN = 0x02, /* port_spec is port WWN */ -}; - -/* - * ELS RPS LS_ACC response. - */ -struct fc_els_rps_resp { - __u8 rps_cmd; /* command - LS_ACC */ - __u8 rps_resv[2]; /* reserved - must be zero */ - __u8 rps_flag; /* flag - see below */ - __u8 rps_resv2[2]; /* reserved */ - __be16 rps_status; /* port status - see below */ - struct fc_els_lesb rps_lesb; /* link error status block */ -}; - -enum fc_els_rps_resp_flag { - FC_ELS_RPS_LPEV = 0x01, /* L_port extension valid */ -}; - -enum fc_els_rps_resp_status { - FC_ELS_RPS_PTP = 1 << 5, /* point-to-point connection */ - FC_ELS_RPS_LOOP = 1 << 4, /* loop mode */ - FC_ELS_RPS_FAB = 1 << 3, /* fabric present */ - FC_ELS_RPS_NO_SIG = 1 << 2, /* loss of signal */ - FC_ELS_RPS_NO_SYNC = 1 << 1, /* loss of synchronization */ - FC_ELS_RPS_RESET = 1 << 0, /* in link reset protocol */ -}; - -/* - * ELS LIRR - Link Incident Record Registration request. - */ -struct fc_els_lirr { - __u8 lirr_cmd; /* command */ - __u8 lirr_resv[3]; /* reserved - must be zero */ - __u8 lirr_func; /* registration function */ - __u8 lirr_fmt; /* FC-4 type of RLIR requested */ - __u8 lirr_resv2[2]; /* reserved - must be zero */ -}; - -enum fc_els_lirr_func { - ELS_LIRR_SET_COND = 0x01, /* set - conditionally receive */ - ELS_LIRR_SET_UNCOND = 0x02, /* set - unconditionally receive */ - ELS_LIRR_CLEAR = 0xff /* clear registration */ -}; - -/* - * ELS SRL - Scan Remote Loop request. - */ -struct fc_els_srl { - __u8 srl_cmd; /* command */ - __u8 srl_resv[3]; /* reserved - must be zero */ - __u8 srl_flag; /* flag - see below */ - __u8 srl_flag_param[3]; /* flag parameter */ -}; - -enum fc_els_srl_flag { - FC_ELS_SRL_ALL = 0x00, /* scan all FL ports */ - FC_ELS_SRL_ONE = 0x01, /* scan specified loop */ - FC_ELS_SRL_EN_PER = 0x02, /* enable periodic scanning (param) */ - FC_ELS_SRL_DIS_PER = 0x03, /* disable periodic scanning */ -}; - -/* - * ELS RLS - Read Link Error Status Block request. - */ -struct fc_els_rls { - __u8 rls_cmd; /* command */ - __u8 rls_resv[4]; /* reserved - must be zero */ - __u8 rls_port_id[3]; /* port ID */ -}; - -/* - * ELS RLS LS_ACC Response. - */ -struct fc_els_rls_resp { - __u8 rls_cmd; /* ELS_LS_ACC */ - __u8 rls_resv[3]; /* reserved - must be zero */ - struct fc_els_lesb rls_lesb; /* link error status block */ -}; - -/* - * ELS RLIR - Registered Link Incident Report. - * This is followed by the CLIR and the CLID, described below. - */ -struct fc_els_rlir { - __u8 rlir_cmd; /* command */ - __u8 rlir_resv[3]; /* reserved - must be zero */ - __u8 rlir_fmt; /* format (FC4-type if type specific) */ - __u8 rlir_clr_len; /* common link incident record length */ - __u8 rlir_cld_len; /* common link incident desc. length */ - __u8 rlir_slr_len; /* spec. link incident record length */ -}; - -/* - * CLIR - Common Link Incident Record Data. - Sent via RLIR. - */ -struct fc_els_clir { - __be64 clir_wwpn; /* incident port name */ - __be64 clir_wwnn; /* incident port node name */ - __u8 clir_port_type; /* incident port type */ - __u8 clir_port_id[3]; /* incident port ID */ - - __be64 clir_conn_wwpn; /* connected port name */ - __be64 clir_conn_wwnn; /* connected node name */ - __be64 clir_fab_name; /* fabric name */ - __be32 clir_phys_port; /* physical port number */ - __be32 clir_trans_id; /* transaction ID */ - __u8 clir_resv[3]; /* reserved */ - __u8 clir_ts_fmt; /* time stamp format */ - __be64 clir_timestamp; /* time stamp */ -}; - -/* - * CLIR clir_ts_fmt - time stamp format values. - */ -enum fc_els_clir_ts_fmt { - ELS_CLIR_TS_UNKNOWN = 0, /* time stamp field unknown */ - ELS_CLIR_TS_SEC_FRAC = 1, /* time in seconds and fractions */ - ELS_CLIR_TS_CSU = 2, /* time in clock synch update format */ -}; - -/* - * Common Link Incident Descriptor - sent via RLIR. - */ -struct fc_els_clid { - __u8 clid_iq; /* incident qualifier flags */ - __u8 clid_ic; /* incident code */ - __be16 clid_epai; /* domain/area of ISL */ -}; - -/* - * CLID incident qualifier flags. - */ -enum fc_els_clid_iq { - ELS_CLID_SWITCH = 0x20, /* incident port is a switch node */ - ELS_CLID_E_PORT = 0x10, /* incident is an ISL (E) port */ - ELS_CLID_SEV_MASK = 0x0c, /* severity 2-bit field mask */ - ELS_CLID_SEV_INFO = 0x00, /* report is informational */ - ELS_CLID_SEV_INOP = 0x08, /* link not operational */ - ELS_CLID_SEV_DEG = 0x04, /* link degraded but operational */ - ELS_CLID_LASER = 0x02, /* subassembly is a laser */ - ELS_CLID_FRU = 0x01, /* format can identify a FRU */ -}; - -/* - * CLID incident code. - */ -enum fc_els_clid_ic { - ELS_CLID_IC_IMPL = 1, /* implicit incident */ - ELS_CLID_IC_BER = 2, /* bit-error-rate threshold exceeded */ - ELS_CLID_IC_LOS = 3, /* loss of synch or signal */ - ELS_CLID_IC_NOS = 4, /* non-operational primitive sequence */ - ELS_CLID_IC_PST = 5, /* primitive sequence timeout */ - ELS_CLID_IC_INVAL = 6, /* invalid primitive sequence */ - ELS_CLID_IC_LOOP_TO = 7, /* loop initialization time out */ - ELS_CLID_IC_LIP = 8, /* receiving LIP */ -}; - -#endif /* _FC_ELS_H_ */ diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h deleted file mode 100644 index 50f28b1..0000000 --- a/include/scsi/fc/fc_fs.h +++ /dev/null @@ -1,348 +0,0 @@ -/* - * Copyright(c) 2007 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Maintained at www.Open-FCoE.org - */ - -#ifndef _FC_FS_H_ -#define _FC_FS_H_ - -#include - -/* - * Fibre Channel Framing and Signalling definitions. - * From T11 FC-FS-2 Rev 0.90 - 9 August 2005. - */ - -/* - * Frame header - */ -struct fc_frame_header { - __u8 fh_r_ctl; /* routing control */ - __u8 fh_d_id[3]; /* Destination ID */ - - __u8 fh_cs_ctl; /* class of service control / pri */ - __u8 fh_s_id[3]; /* Source ID */ - - __u8 fh_type; /* see enum fc_fh_type below */ - __u8 fh_f_ctl[3]; /* frame control */ - - __u8 fh_seq_id; /* sequence ID */ - __u8 fh_df_ctl; /* data field control */ - __be16 fh_seq_cnt; /* sequence count */ - - __be16 fh_ox_id; /* originator exchange ID */ - __be16 fh_rx_id; /* responder exchange ID */ - __be32 fh_parm_offset; /* parameter or relative offset */ -}; - -#define FC_FRAME_HEADER_LEN 24 /* expected length of structure */ - -#define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */ -#define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */ - -#define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) -#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) - -/* - * fh_r_ctl - Routing control definitions. - */ - /* - * FC-4 device_data. - */ -enum fc_rctl { - FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */ - FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */ - FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */ - FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */ - FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */ - FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */ - FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */ - FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */ - -#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */ -#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */ - - /* - * Extended Link_Data - */ - FC_RCTL_ELS_REQ = 0x22, /* extended link services request */ - FC_RCTL_ELS_REP = 0x23, /* extended link services reply */ - FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */ - FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */ - /* - * Optional Extended Headers - */ - FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */ - FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */ - FC_RCTL_ENCH = 0x52, /* encapsulation header */ - /* - * Basic Link Services fh_r_ctl values. - */ - FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */ - FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */ - FC_RCTL_BA_RMC = 0x82, /* remove connection */ - FC_RCTL_BA_ACC = 0x84, /* basic accept */ - FC_RCTL_BA_RJT = 0x85, /* basic reject */ - FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */ - /* - * Link Control Information. - */ - FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */ - FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */ - FC_RCTL_P_RJT = 0xc2, /* port reject */ - FC_RCTL_F_RJT = 0xc3, /* fabric reject */ - FC_RCTL_P_BSY = 0xc4, /* port busy */ - FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */ - FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */ - FC_RCTL_LCR = 0xc7, /* link credit reset */ - FC_RCTL_END = 0xc9, /* end */ -}; - /* incomplete list of definitions */ - -/* - * R_CTL names initializer. - * Please keep this matching the above definitions. - */ -#define FC_RCTL_NAMES_INIT { \ - [FC_RCTL_DD_UNCAT] = "uncat", \ - [FC_RCTL_DD_SOL_DATA] = "sol data", \ - [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \ - [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \ - [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \ - [FC_RCTL_DD_DATA_DESC] = "data desc", \ - [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \ - [FC_RCTL_DD_CMD_STATUS] = "cmd status", \ - [FC_RCTL_ELS_REQ] = "ELS req", \ - [FC_RCTL_ELS_REP] = "ELS rep", \ - [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \ - [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \ - [FC_RCTL_BA_NOP] = "BLS NOP", \ - [FC_RCTL_BA_ABTS] = "BLS abort", \ - [FC_RCTL_BA_RMC] = "BLS remove connection", \ - [FC_RCTL_BA_ACC] = "BLS accept", \ - [FC_RCTL_BA_RJT] = "BLS reject", \ - [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \ - [FC_RCTL_ACK_1] = "LC ACK_1", \ - [FC_RCTL_ACK_0] = "LC ACK_0", \ - [FC_RCTL_P_RJT] = "LC port reject", \ - [FC_RCTL_F_RJT] = "LC fabric reject", \ - [FC_RCTL_P_BSY] = "LC port busy", \ - [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \ - [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\ - [FC_RCTL_LCR] = "LC link credit reset", \ - [FC_RCTL_END] = "LC end", \ -} - -/* - * Well-known fabric addresses. - */ -enum fc_well_known_fid { - FC_FID_NONE = 0x000000, /* No destination */ - FC_FID_BCAST = 0xffffff, /* broadcast */ - FC_FID_FLOGI = 0xfffffe, /* fabric login */ - FC_FID_FCTRL = 0xfffffd, /* fabric controller */ - FC_FID_DIR_SERV = 0xfffffc, /* directory server */ - FC_FID_TIME_SERV = 0xfffffb, /* time server */ - FC_FID_MGMT_SERV = 0xfffffa, /* management server */ - FC_FID_QOS = 0xfffff9, /* QoS Facilitator */ - FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */ - FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */ - FC_FID_CLOCK = 0xfffff6, /* clock synch server */ - FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */ -}; - -#define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */ -#define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */ - -/* - * Other well-known addresses, outside the above contiguous range. - */ -#define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */ - -/* - * Fabric ID bytes. - */ -#define FC_FID_DOMAIN 0 -#define FC_FID_PORT 1 -#define FC_FID_LINK 2 - -/* - * fh_type codes - */ -enum fc_fh_type { - FC_TYPE_BLS = 0x00, /* basic link service */ - FC_TYPE_ELS = 0x01, /* extended link service */ - FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */ - FC_TYPE_FCP = 0x08, /* SCSI FCP */ - FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */ - FC_TYPE_ILS = 0x22, /* internal link service */ -}; - -/* - * FC_TYPE names initializer. - * Please keep this matching the above definitions. - */ -#define FC_TYPE_NAMES_INIT { \ - [FC_TYPE_BLS] = "BLS", \ - [FC_TYPE_ELS] = "ELS", \ - [FC_TYPE_IP] = "IP", \ - [FC_TYPE_FCP] = "FCP", \ - [FC_TYPE_CT] = "CT", \ - [FC_TYPE_ILS] = "ILS", \ -} - -/* - * Exchange IDs. - */ -#define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */ -#define FC_XID_MIN 0x0 /* supported min exchange ID */ -#define FC_XID_MAX 0xfffe /* supported max exchange ID */ - -/* - * fh_f_ctl - Frame control flags. - */ -#define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */ -#define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */ -#define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */ -#define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */ -#define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */ -#define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */ -#define FC_FC_RES_B17 (1 << 17) /* reserved */ -#define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */ -#define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */ -#define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */ - -#define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */ -#define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */ -#define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */ - -#define FC_FC_RES_B11 (1 << 11) /* reserved */ -#define FC_FC_RES_B10 (1 << 10) /* reserved */ -#define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */ -#define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */ -#define FC_FC_CONT_SEQ(i) ((i) << 6) -#define FC_FC_ABT_SEQ(i) ((i) << 4) -#define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */ -#define FC_FC_RES2 (1 << 2) /* reserved */ -#define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */ - -/* - * BA_ACC payload. - */ -struct fc_ba_acc { - __u8 ba_seq_id_val; /* SEQ_ID validity */ -#define FC_BA_SEQ_ID_VAL 0x80 - __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */ - __u8 ba_resvd[2]; /* reserved */ - __be16 ba_ox_id; /* OX_ID for aborted seq or exch */ - __be16 ba_rx_id; /* RX_ID for aborted seq or exch */ - __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */ - __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */ -}; - -/* - * BA_RJT: Basic Reject payload. - */ -struct fc_ba_rjt { - __u8 br_resvd; /* reserved */ - __u8 br_reason; /* reason code */ - __u8 br_explan; /* reason explanation */ - __u8 br_vendor; /* vendor unique code */ -}; - -/* - * BA_RJT reason codes. - * From FS-2. - */ -enum fc_ba_rjt_reason { - FC_BA_RJT_NONE = 0, /* in software this means no reject */ - FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */ - FC_BA_RJT_LOG_ERR = 0x03, /* logical error */ - FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */ - FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */ - FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */ - FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */ -}; - -/* - * BA_RJT reason code explanations. - */ -enum fc_ba_rjt_explan { - FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */ - FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */ - FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */ -}; - -/* - * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field. - */ -struct fc_pf_rjt { - __u8 rj_action; /* reserved */ - __u8 rj_reason; /* reason code */ - __u8 rj_resvd; /* reserved */ - __u8 rj_vendor; /* vendor unique code */ -}; - -/* - * P_RJT and F_RJT reject reason codes. - */ -enum fc_pf_rjt_reason { - FC_RJT_NONE = 0, /* non-reject (reserved by standard) */ - FC_RJT_INVL_DID = 0x01, /* invalid destination ID */ - FC_RJT_INVL_SID = 0x02, /* invalid source ID */ - FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */ - FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */ - FC_RJT_CLS_UNSUP = 0x05, /* class not supported */ - FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */ - FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */ - FC_RJT_LINK_CTL = 0x08, /* invalid link control */ - FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */ - FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */ - FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */ - FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */ - FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */ - FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */ - FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */ - FC_RJT_PARAM = 0x10, /* invalid parameter field */ - FC_RJT_EXCH_ERR = 0x11, /* exchange error */ - FC_RJT_PROTO = 0x12, /* protocol error */ - FC_RJT_LEN = 0x13, /* incorrect length */ - FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */ - FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */ - FC_RJT_LOGI_REQ = 0x16, /* login required */ - FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */ - FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */ - FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */ - FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */ - FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */ - FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */ - FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */ - FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */ - FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */ - FC_RJT_MCAST_ERR = 0x22, /* multicast error */ - FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */ - FC_RJT_PRLI_REQ = 0x24, /* process login required */ - FC_RJT_INVL_ATT = 0x25, /* invalid attachment */ - FC_RJT_VENDOR = 0xff, /* vendor specific reject */ -}; - -/* default timeout values */ - -#define FC_DEF_E_D_TOV 2000UL -#define FC_DEF_R_A_TOV 10000UL - -#endif /* _FC_FS_H_ */ diff --git a/include/scsi/fc/fc_gs.h b/include/scsi/fc/fc_gs.h deleted file mode 100644 index a37346d..0000000 --- a/include/scsi/fc/fc_gs.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright(c) 2007 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Maintained at www.Open-FCoE.org - */ - -#ifndef _FC_GS_H_ -#define _FC_GS_H_ - -#include - -/* - * Fibre Channel Services - Common Transport. - * From T11.org FC-GS-2 Rev 5.3 November 1998. - */ - -struct fc_ct_hdr { - __u8 ct_rev; /* revision */ - __u8 ct_in_id[3]; /* N_Port ID of original requestor */ - __u8 ct_fs_type; /* type of fibre channel service */ - __u8 ct_fs_subtype; /* subtype */ - __u8 ct_options; - __u8 _ct_resvd1; - __be16 ct_cmd; /* command / response code */ - __be16 ct_mr_size; /* maximum / residual size */ - __u8 _ct_resvd2; - __u8 ct_reason; /* reject reason */ - __u8 ct_explan; /* reason code explanation */ - __u8 ct_vendor; /* vendor unique data */ -}; - -#define FC_CT_HDR_LEN 16 /* expected sizeof (struct fc_ct_hdr) */ - -enum fc_ct_rev { - FC_CT_REV = 1 /* common transport revision */ -}; - -/* - * ct_fs_type values. - */ -enum fc_ct_fs_type { - FC_FST_ALIAS = 0xf8, /* alias service */ - FC_FST_MGMT = 0xfa, /* management service */ - FC_FST_TIME = 0xfb, /* time service */ - FC_FST_DIR = 0xfc, /* directory service */ -}; - -/* - * ct_cmd: Command / response codes - */ -enum fc_ct_cmd { - FC_FS_RJT = 0x8001, /* reject */ - FC_FS_ACC = 0x8002, /* accept */ -}; - -/* - * FS_RJT reason codes. - */ -enum fc_ct_reason { - FC_FS_RJT_CMD = 0x01, /* invalid command code */ - FC_FS_RJT_VER = 0x02, /* invalid version level */ - FC_FS_RJT_LOG = 0x03, /* logical error */ - FC_FS_RJT_IUSIZ = 0x04, /* invalid IU size */ - FC_FS_RJT_BSY = 0x05, /* logical busy */ - FC_FS_RJT_PROTO = 0x07, /* protocol error */ - FC_FS_RJT_UNABL = 0x09, /* unable to perform command request */ - FC_FS_RJT_UNSUP = 0x0b, /* command not supported */ -}; - -/* - * FS_RJT reason code explanations. - */ -enum fc_ct_explan { - FC_FS_EXP_NONE = 0x00, /* no additional explanation */ - FC_FS_EXP_PID = 0x01, /* port ID not registered */ - FC_FS_EXP_PNAM = 0x02, /* port name not registered */ - FC_FS_EXP_NNAM = 0x03, /* node name not registered */ - FC_FS_EXP_COS = 0x04, /* class of service not registered */ - FC_FS_EXP_FTNR = 0x07, /* FC-4 types not registered */ - /* definitions not complete */ -}; - -#endif /* _FC_GS_H_ */ diff --git a/include/scsi/fc/fc_ns.h b/include/scsi/fc/fc_ns.h deleted file mode 100644 index f7751d5..0000000 --- a/include/scsi/fc/fc_ns.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - * Copyright(c) 2007 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Maintained at www.Open-FCoE.org - */ - -#ifndef _FC_NS_H_ -#define _FC_NS_H_ - -#include - -/* - * Fibre Channel Services - Name Service (dNS) - * From T11.org FC-GS-2 Rev 5.3 November 1998. - */ - -/* - * Common-transport sub-type for Name Server. - */ -#define FC_NS_SUBTYPE 2 /* fs_ct_hdr.ct_fs_subtype */ - -/* - * Name server Requests. - * Note: this is an incomplete list, some unused requests are omitted. - */ -enum fc_ns_req { - FC_NS_GA_NXT = 0x0100, /* get all next */ - FC_NS_GI_A = 0x0101, /* get identifiers - scope */ - FC_NS_GPN_ID = 0x0112, /* get port name by ID */ - FC_NS_GNN_ID = 0x0113, /* get node name by ID */ - FC_NS_GSPN_ID = 0x0118, /* get symbolic port name */ - FC_NS_GID_PN = 0x0121, /* get ID for port name */ - FC_NS_GID_NN = 0x0131, /* get IDs for node name */ - FC_NS_GID_FT = 0x0171, /* get IDs by FC4 type */ - FC_NS_GPN_FT = 0x0172, /* get port names by FC4 type */ - FC_NS_GID_PT = 0x01a1, /* get IDs by port type */ - FC_NS_RPN_ID = 0x0212, /* reg port name for ID */ - FC_NS_RNN_ID = 0x0213, /* reg node name for ID */ - FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */ - FC_NS_RSPN_ID = 0x0218, /* reg symbolic port name */ - FC_NS_RFF_ID = 0x021f, /* reg FC4 Features for ID */ - FC_NS_RSNN_NN = 0x0239, /* reg symbolic node name */ -}; - -/* - * Port type values. - */ -enum fc_ns_pt { - FC_NS_UNID_PORT = 0x00, /* unidentified */ - FC_NS_N_PORT = 0x01, /* N port */ - FC_NS_NL_PORT = 0x02, /* NL port */ - FC_NS_FNL_PORT = 0x03, /* F/NL port */ - FC_NS_NX_PORT = 0x7f, /* Nx port */ - FC_NS_F_PORT = 0x81, /* F port */ - FC_NS_FL_PORT = 0x82, /* FL port */ - FC_NS_E_PORT = 0x84, /* E port */ - FC_NS_B_PORT = 0x85, /* B port */ -}; - -/* - * Port type object. - */ -struct fc_ns_pt_obj { - __u8 pt_type; -}; - -/* - * Port ID object - */ -struct fc_ns_fid { - __u8 fp_flags; /* flags for responses only */ - __u8 fp_fid[3]; -}; - -/* - * fp_flags in port ID object, for responses only. - */ -#define FC_NS_FID_LAST 0x80 /* last object */ - -/* - * FC4-types object. - */ -#define FC_NS_TYPES 256 /* number of possible FC-4 types */ -#define FC_NS_BPW 32 /* bits per word in bitmap */ - -struct fc_ns_fts { - __be32 ff_type_map[FC_NS_TYPES / FC_NS_BPW]; /* bitmap of FC-4 types */ -}; - -/* - * FC4-features object. - */ -struct fc_ns_ff { - __be32 fd_feat[FC_NS_TYPES * 4 / FC_NS_BPW]; /* 4-bits per FC-type */ -}; - -/* - * GID_PT request. - */ -struct fc_ns_gid_pt { - __u8 fn_pt_type; - __u8 fn_domain_id_scope; - __u8 fn_area_id_scope; - __u8 fn_resvd; -}; - -/* - * GID_FT or GPN_FT request. - */ -struct fc_ns_gid_ft { - __u8 fn_resvd; - __u8 fn_domain_id_scope; - __u8 fn_area_id_scope; - __u8 fn_fc4_type; -}; - -/* - * GPN_FT response. - */ -struct fc_gpn_ft_resp { - __u8 fp_flags; /* see fp_flags definitions above */ - __u8 fp_fid[3]; /* port ID */ - __be32 fp_resvd; - __be64 fp_wwpn; /* port name */ -}; - -/* - * GID_PN request - */ -struct fc_ns_gid_pn { - __be64 fn_wwpn; /* port name */ -}; - -/* - * GID_PN response or GSPN_ID request - */ -struct fc_gid_pn_resp { - __u8 fp_resvd; - __u8 fp_fid[3]; /* port ID */ -}; - -/* - * GSPN_ID response - */ -struct fc_gspn_resp { - __u8 fp_name_len; - char fp_name[]; -}; - -/* - * RFT_ID request - register FC-4 types for ID. - */ -struct fc_ns_rft_id { - struct fc_ns_fid fr_fid; /* port ID object */ - struct fc_ns_fts fr_fts; /* FC-4 types object */ -}; - -/* - * RPN_ID request - register port name for ID. - * RNN_ID request - register node name for ID. - */ -struct fc_ns_rn_id { - struct fc_ns_fid fr_fid; /* port ID object */ - __be64 fr_wwn; /* node name or port name */ -} __attribute__((__packed__)); - -/* - * RSNN_NN request - register symbolic node name - */ -struct fc_ns_rsnn { - __be64 fr_wwn; /* node name */ - __u8 fr_name_len; - char fr_name[]; -} __attribute__((__packed__)); - -/* - * RSPN_ID request - register symbolic port name - */ -struct fc_ns_rspn { - struct fc_ns_fid fr_fid; /* port ID object */ - __u8 fr_name_len; - char fr_name[]; -} __attribute__((__packed__)); - -/* - * RFF_ID request - register FC-4 Features for ID. - */ -struct fc_ns_rff_id { - struct fc_ns_fid fr_fid; /* port ID object */ - __u8 fr_resvd[2]; - __u8 fr_feat; /* FC-4 Feature bits */ - __u8 fr_type; /* FC-4 type */ -} __attribute__((__packed__)); - -#endif /* _FC_NS_H_ */ diff --git a/include/scsi/fcoe_sysfs.h b/include/scsi/fcoe_sysfs.h index 604cb9b..7e23148 100644 --- a/include/scsi/fcoe_sysfs.h +++ b/include/scsi/fcoe_sysfs.h @@ -34,7 +34,8 @@ struct fcoe_sysfs_function_template { void (*get_fcoe_ctlr_symb_err)(struct fcoe_ctlr_device *); void (*get_fcoe_ctlr_err_block)(struct fcoe_ctlr_device *); void (*get_fcoe_ctlr_fcs_error)(struct fcoe_ctlr_device *); - void (*get_fcoe_ctlr_mode)(struct fcoe_ctlr_device *); + void (*set_fcoe_ctlr_mode)(struct fcoe_ctlr_device *); + int (*set_fcoe_ctlr_enabled)(struct fcoe_ctlr_device *); void (*get_fcoe_fcf_selected)(struct fcoe_fcf_device *); void (*get_fcoe_fcf_vlan_id)(struct fcoe_fcf_device *); }; @@ -48,6 +49,12 @@ enum fip_conn_type { FIP_CONN_TYPE_VN2VN, }; +enum ctlr_enabled_state { + FCOE_CTLR_ENABLED, + FCOE_CTLR_DISABLED, + FCOE_CTLR_UNUSED, +}; + struct fcoe_ctlr_device { u32 id; @@ -64,6 +71,8 @@ struct fcoe_ctlr_device { int fcf_dev_loss_tmo; enum fip_conn_type mode; + enum ctlr_enabled_state enabled; + /* expected in host order for displaying */ struct fcoe_fc_els_lesb lesb; }; diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index 8742d85..4427393 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -260,6 +260,9 @@ void __fcoe_get_lesb(struct fc_lport *lport, struct fc_els_lesb *fc_lesb, struct net_device *netdev); void fcoe_wwn_to_str(u64 wwn, char *buf, int len); int fcoe_validate_vport_create(struct fc_vport *vport); +int fcoe_link_speed_update(struct fc_lport *); +void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *); +void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev); /** * is_fip_mode() - returns true if FIP mode selected. @@ -289,8 +292,11 @@ static inline bool is_fip_mode(struct fcoe_ctlr *fip) * @attached: whether this transport is already attached * @list: list linkage to all attached transports * @match: handler to allow the transport driver to match up a given netdev + * @alloc: handler to allocate per-instance FCoE structures + * (no discovery or login) * @create: handler to sysfs entry of create for FCoE instances - * @destroy: handler to sysfs entry of destroy for FCoE instances + * @destroy: handler to delete per-instance FCoE structures + * (frees all memory) * @enable: handler to sysfs entry of enable for FCoE instances * @disable: handler to sysfs entry of disable for FCoE instances */ @@ -299,6 +305,7 @@ struct fcoe_transport { bool attached; struct list_head list; bool (*match) (struct net_device *device); + int (*alloc) (struct net_device *device); int (*create) (struct net_device *device, enum fip_state fip_mode); int (*destroy) (struct net_device *device); int (*enable) (struct net_device *device); @@ -347,7 +354,20 @@ struct fcoe_port { struct timer_list timer; struct work_struct destroy_work; u8 data_src_addr[ETH_ALEN]; + struct net_device * (*get_netdev)(const struct fc_lport *lport); }; + +/** + * fcoe_get_netdev() - Return the net device associated with a local port + * @lport: The local port to get the net device from + */ +static inline struct net_device *fcoe_get_netdev(const struct fc_lport *lport) +{ + struct fcoe_port *port = ((struct fcoe_port *)lport_priv(lport)); + + return (port->get_netdev) ? port->get_netdev(lport) : NULL; +} + void fcoe_clean_pending_queue(struct fc_lport *); void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb); void fcoe_queue_timer(ulong lport); @@ -356,7 +376,7 @@ int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen, /* FCoE Sysfs helpers */ void fcoe_fcf_get_selected(struct fcoe_fcf_device *); -void fcoe_ctlr_get_fip_mode(struct fcoe_ctlr_device *); +void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *); /** * struct netdev_list @@ -372,4 +392,12 @@ struct fcoe_netdev_mapping { int fcoe_transport_attach(struct fcoe_transport *ft); int fcoe_transport_detach(struct fcoe_transport *ft); +/* sysfs store handler for ctrl_control interface */ +ssize_t fcoe_ctlr_create_store(struct bus_type *bus, + const char *buf, size_t count); +ssize_t fcoe_ctlr_destroy_store(struct bus_type *bus, + const char *buf, size_t count); + #endif /* _LIBFCOE_H */ + + diff --git a/include/scsi/scsi_bsg_fc.h b/include/scsi/scsi_bsg_fc.h deleted file mode 100644 index 3031b90..0000000 --- a/include/scsi/scsi_bsg_fc.h +++ /dev/null @@ -1,320 +0,0 @@ -/* - * FC Transport BSG Interface - * - * Copyright (C) 2008 James Smart, Emulex Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef SCSI_BSG_FC_H -#define SCSI_BSG_FC_H - -/* - * This file intended to be included by both kernel and user space - */ - -/* - * FC Transport SGIO v4 BSG Message Support - */ - -/* Default BSG request timeout (in seconds) */ -#define FC_DEFAULT_BSG_TIMEOUT (10 * HZ) - - -/* - * Request Message Codes supported by the FC Transport - */ - -/* define the class masks for the message codes */ -#define FC_BSG_CLS_MASK 0xF0000000 /* find object class */ -#define FC_BSG_HST_MASK 0x80000000 /* fc host class */ -#define FC_BSG_RPT_MASK 0x40000000 /* fc rport class */ - - /* fc_host Message Codes */ -#define FC_BSG_HST_ADD_RPORT (FC_BSG_HST_MASK | 0x00000001) -#define FC_BSG_HST_DEL_RPORT (FC_BSG_HST_MASK | 0x00000002) -#define FC_BSG_HST_ELS_NOLOGIN (FC_BSG_HST_MASK | 0x00000003) -#define FC_BSG_HST_CT (FC_BSG_HST_MASK | 0x00000004) -#define FC_BSG_HST_VENDOR (FC_BSG_HST_MASK | 0x000000FF) - - /* fc_rport Message Codes */ -#define FC_BSG_RPT_ELS (FC_BSG_RPT_MASK | 0x00000001) -#define FC_BSG_RPT_CT (FC_BSG_RPT_MASK | 0x00000002) - - - -/* - * FC Address Identifiers in Message Structures : - * - * Whenever a command payload contains a FC Address Identifier - * (aka port_id), the value is effectively in big-endian - * order, thus the array elements are decoded as follows: - * element [0] is bits 23:16 of the FC Address Identifier - * element [1] is bits 15:8 of the FC Address Identifier - * element [2] is bits 7:0 of the FC Address Identifier - */ - - -/* - * FC Host Messages - */ - -/* FC_BSG_HST_ADDR_PORT : */ - -/* Request: - * This message requests the FC host to login to the remote port - * at the specified N_Port_Id. The remote port is to be enumerated - * with the transport upon completion of the login. - */ -struct fc_bsg_host_add_rport { - uint8_t reserved; - - /* FC Address Identier of the remote port to login to */ - uint8_t port_id[3]; -}; - -/* Response: - * There is no additional response data - fc_bsg_reply->result is sufficient - */ - - -/* FC_BSG_HST_DEL_RPORT : */ - -/* Request: - * This message requests the FC host to remove an enumerated - * remote port and to terminate the login to it. - * - * Note: The driver is free to reject this request if it desires to - * remain logged in with the remote port. - */ -struct fc_bsg_host_del_rport { - uint8_t reserved; - - /* FC Address Identier of the remote port to logout of */ - uint8_t port_id[3]; -}; - -/* Response: - * There is no additional response data - fc_bsg_reply->result is sufficient - */ - - -/* FC_BSG_HST_ELS_NOLOGIN : */ - -/* Request: - * This message requests the FC_Host to send an ELS to a specific - * N_Port_ID. The host does not need to log into the remote port, - * nor does it need to enumerate the rport for further traffic - * (although, the FC host is free to do so if it desires). - */ -struct fc_bsg_host_els { - /* - * ELS Command Code being sent (must be the same as byte 0 - * of the payload) - */ - uint8_t command_code; - - /* FC Address Identier of the remote port to send the ELS to */ - uint8_t port_id[3]; -}; - -/* Response: - */ -/* fc_bsg_ctels_reply->status values */ -#define FC_CTELS_STATUS_OK 0x00000000 -#define FC_CTELS_STATUS_REJECT 0x00000001 -#define FC_CTELS_STATUS_P_RJT 0x00000002 -#define FC_CTELS_STATUS_F_RJT 0x00000003 -#define FC_CTELS_STATUS_P_BSY 0x00000004 -#define FC_CTELS_STATUS_F_BSY 0x00000006 -struct fc_bsg_ctels_reply { - /* - * Note: An ELS LS_RJT may be reported in 2 ways: - * a) A status of FC_CTELS_STATUS_OK is returned. The caller - * is to look into the ELS receive payload to determine - * LS_ACC or LS_RJT (by contents of word 0). The reject - * data will be in word 1. - * b) A status of FC_CTELS_STATUS_REJECT is returned, The - * rjt_data field will contain valid data. - * - * Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and - * the receive payload word 0 indicates LS_ACC - * (e.g. value is 0x02xxxxxx). - * - * Note: Similarly, a CT Reject may be reported in 2 ways: - * a) A status of FC_CTELS_STATUS_OK is returned. The caller - * is to look into the CT receive payload to determine - * Accept or Reject (by contents of word 2). The reject - * data will be in word 3. - * b) A status of FC_CTELS_STATUS_REJECT is returned, The - * rjt_data field will contain valid data. - * - * Note: x_RJT/BSY status will indicae that the rjt_data field - * is valid and contains the reason/explanation values. - */ - uint32_t status; /* See FC_CTELS_STATUS_xxx */ - - /* valid if status is not FC_CTELS_STATUS_OK */ - struct { - uint8_t action; /* fragment_id for CT REJECT */ - uint8_t reason_code; - uint8_t reason_explanation; - uint8_t vendor_unique; - } rjt_data; -}; - - -/* FC_BSG_HST_CT : */ - -/* Request: - * This message requests that a CT Request be performed with the - * indicated N_Port_ID. The driver is responsible for logging in with - * the fabric and/or N_Port_ID, etc as per FC rules. This request does - * not mandate that the driver must enumerate the destination in the - * transport. The driver is allowed to decide whether to enumerate it, - * and whether to tear it down after the request. - */ -struct fc_bsg_host_ct { - uint8_t reserved; - - /* FC Address Identier of the remote port to send the ELS to */ - uint8_t port_id[3]; - - /* - * We need words 0-2 of the generic preamble for the LLD's - */ - uint32_t preamble_word0; /* revision & IN_ID */ - uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ - uint32_t preamble_word2; /* Cmd Code, Max Size */ - -}; -/* Response: - * - * The reply structure is an fc_bsg_ctels_reply structure - */ - - -/* FC_BSG_HST_VENDOR : */ - -/* Request: - * Note: When specifying vendor_id, be sure to read the Vendor Type and ID - * formatting requirements specified in scsi_netlink.h - */ -struct fc_bsg_host_vendor { - /* - * Identifies the vendor that the message is formatted for. This - * should be the recipient of the message. - */ - uint64_t vendor_id; - - /* start of vendor command area */ - uint32_t vendor_cmd[0]; -}; - -/* Response: - */ -struct fc_bsg_host_vendor_reply { - /* start of vendor response area */ - uint32_t vendor_rsp[0]; -}; - - - -/* - * FC Remote Port Messages - */ - -/* FC_BSG_RPT_ELS : */ - -/* Request: - * This message requests that an ELS be performed with the rport. - */ -struct fc_bsg_rport_els { - /* - * ELS Command Code being sent (must be the same as - * byte 0 of the payload) - */ - uint8_t els_code; -}; - -/* Response: - * - * The reply structure is an fc_bsg_ctels_reply structure - */ - - -/* FC_BSG_RPT_CT : */ - -/* Request: - * This message requests that a CT Request be performed with the rport. - */ -struct fc_bsg_rport_ct { - /* - * We need words 0-2 of the generic preamble for the LLD's - */ - uint32_t preamble_word0; /* revision & IN_ID */ - uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ - uint32_t preamble_word2; /* Cmd Code, Max Size */ -}; -/* Response: - * - * The reply structure is an fc_bsg_ctels_reply structure - */ - - - - -/* request (CDB) structure of the sg_io_v4 */ -struct fc_bsg_request { - uint32_t msgcode; - union { - struct fc_bsg_host_add_rport h_addrport; - struct fc_bsg_host_del_rport h_delrport; - struct fc_bsg_host_els h_els; - struct fc_bsg_host_ct h_ct; - struct fc_bsg_host_vendor h_vendor; - - struct fc_bsg_rport_els r_els; - struct fc_bsg_rport_ct r_ct; - } rqst_data; -} __attribute__((packed)); - - -/* response (request sense data) structure of the sg_io_v4 */ -struct fc_bsg_reply { - /* - * The completion result. Result exists in two forms: - * if negative, it is an -Exxx system errno value. There will - * be no further reply information supplied. - * else, it's the 4-byte scsi error result, with driver, host, - * msg and status fields. The per-msgcode reply structure - * will contain valid data. - */ - uint32_t result; - - /* If there was reply_payload, how much was recevied ? */ - uint32_t reply_payload_rcv_len; - - union { - struct fc_bsg_host_vendor_reply vendor_reply; - - struct fc_bsg_ctels_reply ctels_reply; - } reply_data; -}; - - -#endif /* SCSI_BSG_FC_H */ - diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 4908480..2b6956e 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -873,7 +873,7 @@ static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsign SHOST_DIF_TYPE2_PROTECTION, SHOST_DIF_TYPE3_PROTECTION }; - if (target_type > SHOST_DIF_TYPE3_PROTECTION) + if (target_type >= ARRAY_SIZE(cap)) return 0; return shost->prot_capabilities & cap[target_type] ? target_type : 0; @@ -887,7 +887,7 @@ static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsign SHOST_DIX_TYPE2_PROTECTION, SHOST_DIX_TYPE3_PROTECTION }; - if (target_type > SHOST_DIX_TYPE3_PROTECTION) + if (target_type >= ARRAY_SIZE(cap)) return 0; return shost->prot_capabilities & cap[target_type]; diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h deleted file mode 100644 index 62b4eda..0000000 --- a/include/scsi/scsi_netlink.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * SCSI Transport Netlink Interface - * Used for the posting of outbound SCSI transport events - * - * Copyright (C) 2006 James Smart, Emulex Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef SCSI_NETLINK_H -#define SCSI_NETLINK_H - -#include -#include - -/* - * This file intended to be included by both kernel and user space - */ - -/* Single Netlink Message type to send all SCSI Transport messages */ -#define SCSI_TRANSPORT_MSG NLMSG_MIN_TYPE + 1 - -/* SCSI Transport Broadcast Groups */ - /* leaving groups 0 and 1 unassigned */ -#define SCSI_NL_GRP_FC_EVENTS (1<<2) /* Group 2 */ -#define SCSI_NL_GRP_CNT 3 - - -/* SCSI_TRANSPORT_MSG event message header */ -struct scsi_nl_hdr { - uint8_t version; - uint8_t transport; - uint16_t magic; - uint16_t msgtype; - uint16_t msglen; -} __attribute__((aligned(sizeof(uint64_t)))); - -/* scsi_nl_hdr->version value */ -#define SCSI_NL_VERSION 1 - -/* scsi_nl_hdr->magic value */ -#define SCSI_NL_MAGIC 0xA1B2 - -/* scsi_nl_hdr->transport value */ -#define SCSI_NL_TRANSPORT 0 -#define SCSI_NL_TRANSPORT_FC 1 -#define SCSI_NL_MAX_TRANSPORTS 2 - -/* Transport-based scsi_nl_hdr->msgtype values are defined in each transport */ - -/* - * GENERIC SCSI scsi_nl_hdr->msgtype Values - */ - /* kernel -> user */ -#define SCSI_NL_SHOST_VENDOR 0x0001 - /* user -> kernel */ -/* SCSI_NL_SHOST_VENDOR msgtype is kernel->user and user->kernel */ - - -/* - * Message Structures : - */ - -/* macro to round up message lengths to 8byte boundary */ -#define SCSI_NL_MSGALIGN(len) (((len) + 7) & ~7) - - -/* - * SCSI HOST Vendor Unique messages : - * SCSI_NL_SHOST_VENDOR - * - * Note: The Vendor Unique message payload will begin directly after - * this structure, with the length of the payload per vmsg_datalen. - * - * Note: When specifying vendor_id, be sure to read the Vendor Type and ID - * formatting requirements specified below - */ -struct scsi_nl_host_vendor_msg { - struct scsi_nl_hdr snlh; /* must be 1st element ! */ - uint64_t vendor_id; - uint16_t host_no; - uint16_t vmsg_datalen; -} __attribute__((aligned(sizeof(uint64_t)))); - - -/* - * Vendor ID: - * If transports post vendor-unique events, they must pass a well-known - * 32-bit vendor identifier. This identifier consists of 8 bits indicating - * the "type" of identifier contained, and 24 bits of id data. - * - * Identifiers for each type: - * PCI : ID data is the 16 bit PCI Registered Vendor ID - */ -#define SCSI_NL_VID_TYPE_SHIFT 56 -#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT) -#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT) -#define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK) - - -#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen) \ - { \ - (hdr)->version = SCSI_NL_VERSION; \ - (hdr)->transport = t; \ - (hdr)->magic = SCSI_NL_MAGIC; \ - (hdr)->msgtype = mtype; \ - (hdr)->msglen = mlen; \ - } - -#endif /* SCSI_NETLINK_H */ - diff --git a/include/scsi/scsi_netlink_fc.h b/include/scsi/scsi_netlink_fc.h deleted file mode 100644 index cbf76e4..0000000 --- a/include/scsi/scsi_netlink_fc.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * FC Transport Netlink Interface - * - * Copyright (C) 2006 James Smart, Emulex Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef SCSI_NETLINK_FC_H -#define SCSI_NETLINK_FC_H - -#include - -/* - * This file intended to be included by both kernel and user space - */ - -/* - * FC Transport Message Types - */ - /* kernel -> user */ -#define FC_NL_ASYNC_EVENT 0x0100 - /* user -> kernel */ -/* none */ - - -/* - * Message Structures : - */ - -/* macro to round up message lengths to 8byte boundary */ -#define FC_NL_MSGALIGN(len) (((len) + 7) & ~7) - - -/* - * FC Transport Broadcast Event Message : - * FC_NL_ASYNC_EVENT - * - * Note: if Vendor Unique message, &event_data will be start of - * vendor unique payload, and the length of the payload is - * per event_datalen - * - * Note: When specifying vendor_id, be sure to read the Vendor Type and ID - * formatting requirements specified in scsi_netlink.h - */ -struct fc_nl_event { - struct scsi_nl_hdr snlh; /* must be 1st element ! */ - uint64_t seconds; - uint64_t vendor_id; - uint16_t host_no; - uint16_t event_datalen; - uint32_t event_num; - uint32_t event_code; - uint32_t event_data; -} __attribute__((aligned(sizeof(uint64_t)))); - - -#endif /* SCSI_NETLINK_FC_H */ - diff --git a/include/uapi/scsi/Kbuild b/include/uapi/scsi/Kbuild index 29a87dd..75746d5 100644 --- a/include/uapi/scsi/Kbuild +++ b/include/uapi/scsi/Kbuild @@ -1,2 +1,5 @@ # UAPI Header export list header-y += fc/ +header-y += scsi_bsg_fc.h +header-y += scsi_netlink.h +header-y += scsi_netlink_fc.h diff --git a/include/uapi/scsi/fc/Kbuild b/include/uapi/scsi/fc/Kbuild index aafaa5a..5ead9fa 100644 --- a/include/uapi/scsi/fc/Kbuild +++ b/include/uapi/scsi/fc/Kbuild @@ -1 +1,5 @@ # UAPI Header export list +header-y += fc_els.h +header-y += fc_fs.h +header-y += fc_gs.h +header-y += fc_ns.h diff --git a/include/uapi/scsi/fc/fc_els.h b/include/uapi/scsi/fc/fc_els.h new file mode 100644 index 0000000..481abbd --- /dev/null +++ b/include/uapi/scsi/fc/fc_els.h @@ -0,0 +1,831 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_ELS_H_ +#define _FC_ELS_H_ + +#include + +/* + * Fibre Channel Switch - Enhanced Link Services definitions. + * From T11 FC-LS Rev 1.2 June 7, 2005. + */ + +/* + * ELS Command codes - byte 0 of the frame payload + */ +enum fc_els_cmd { + ELS_LS_RJT = 0x01, /* ESL reject */ + ELS_LS_ACC = 0x02, /* ESL Accept */ + ELS_PLOGI = 0x03, /* N_Port login */ + ELS_FLOGI = 0x04, /* F_Port login */ + ELS_LOGO = 0x05, /* Logout */ + ELS_ABTX = 0x06, /* Abort exchange - obsolete */ + ELS_RCS = 0x07, /* read connection status */ + ELS_RES = 0x08, /* read exchange status block */ + ELS_RSS = 0x09, /* read sequence status block */ + ELS_RSI = 0x0a, /* read sequence initiative */ + ELS_ESTS = 0x0b, /* establish streaming */ + ELS_ESTC = 0x0c, /* estimate credit */ + ELS_ADVC = 0x0d, /* advise credit */ + ELS_RTV = 0x0e, /* read timeout value */ + ELS_RLS = 0x0f, /* read link error status block */ + ELS_ECHO = 0x10, /* echo */ + ELS_TEST = 0x11, /* test */ + ELS_RRQ = 0x12, /* reinstate recovery qualifier */ + ELS_REC = 0x13, /* read exchange concise */ + ELS_SRR = 0x14, /* sequence retransmission request */ + ELS_PRLI = 0x20, /* process login */ + ELS_PRLO = 0x21, /* process logout */ + ELS_SCN = 0x22, /* state change notification */ + ELS_TPLS = 0x23, /* test process login state */ + ELS_TPRLO = 0x24, /* third party process logout */ + ELS_LCLM = 0x25, /* login control list mgmt (obs) */ + ELS_GAID = 0x30, /* get alias_ID */ + ELS_FACT = 0x31, /* fabric activate alias_id */ + ELS_FDACDT = 0x32, /* fabric deactivate alias_id */ + ELS_NACT = 0x33, /* N-port activate alias_id */ + ELS_NDACT = 0x34, /* N-port deactivate alias_id */ + ELS_QOSR = 0x40, /* quality of service request */ + ELS_RVCS = 0x41, /* read virtual circuit status */ + ELS_PDISC = 0x50, /* discover N_port service params */ + ELS_FDISC = 0x51, /* discover F_port service params */ + ELS_ADISC = 0x52, /* discover address */ + ELS_RNC = 0x53, /* report node cap (obs) */ + ELS_FARP_REQ = 0x54, /* FC ARP request */ + ELS_FARP_REPL = 0x55, /* FC ARP reply */ + ELS_RPS = 0x56, /* read port status block */ + ELS_RPL = 0x57, /* read port list */ + ELS_RPBC = 0x58, /* read port buffer condition */ + ELS_FAN = 0x60, /* fabric address notification */ + ELS_RSCN = 0x61, /* registered state change notification */ + ELS_SCR = 0x62, /* state change registration */ + ELS_RNFT = 0x63, /* report node FC-4 types */ + ELS_CSR = 0x68, /* clock synch. request */ + ELS_CSU = 0x69, /* clock synch. update */ + ELS_LINIT = 0x70, /* loop initialize */ + ELS_LSTS = 0x72, /* loop status */ + ELS_RNID = 0x78, /* request node ID data */ + ELS_RLIR = 0x79, /* registered link incident report */ + ELS_LIRR = 0x7a, /* link incident record registration */ + ELS_SRL = 0x7b, /* scan remote loop */ + ELS_SBRP = 0x7c, /* set bit-error reporting params */ + ELS_RPSC = 0x7d, /* report speed capabilities */ + ELS_QSA = 0x7e, /* query security attributes */ + ELS_EVFP = 0x7f, /* exchange virt. fabrics params */ + ELS_LKA = 0x80, /* link keep-alive */ + ELS_AUTH_ELS = 0x90, /* authentication ELS */ +}; + +/* + * Initializer useful for decoding table. + * Please keep this in sync with the above definitions. + */ +#define FC_ELS_CMDS_INIT { \ + [ELS_LS_RJT] = "LS_RJT", \ + [ELS_LS_ACC] = "LS_ACC", \ + [ELS_PLOGI] = "PLOGI", \ + [ELS_FLOGI] = "FLOGI", \ + [ELS_LOGO] = "LOGO", \ + [ELS_ABTX] = "ABTX", \ + [ELS_RCS] = "RCS", \ + [ELS_RES] = "RES", \ + [ELS_RSS] = "RSS", \ + [ELS_RSI] = "RSI", \ + [ELS_ESTS] = "ESTS", \ + [ELS_ESTC] = "ESTC", \ + [ELS_ADVC] = "ADVC", \ + [ELS_RTV] = "RTV", \ + [ELS_RLS] = "RLS", \ + [ELS_ECHO] = "ECHO", \ + [ELS_TEST] = "TEST", \ + [ELS_RRQ] = "RRQ", \ + [ELS_REC] = "REC", \ + [ELS_SRR] = "SRR", \ + [ELS_PRLI] = "PRLI", \ + [ELS_PRLO] = "PRLO", \ + [ELS_SCN] = "SCN", \ + [ELS_TPLS] = "TPLS", \ + [ELS_TPRLO] = "TPRLO", \ + [ELS_LCLM] = "LCLM", \ + [ELS_GAID] = "GAID", \ + [ELS_FACT] = "FACT", \ + [ELS_FDACDT] = "FDACDT", \ + [ELS_NACT] = "NACT", \ + [ELS_NDACT] = "NDACT", \ + [ELS_QOSR] = "QOSR", \ + [ELS_RVCS] = "RVCS", \ + [ELS_PDISC] = "PDISC", \ + [ELS_FDISC] = "FDISC", \ + [ELS_ADISC] = "ADISC", \ + [ELS_RNC] = "RNC", \ + [ELS_FARP_REQ] = "FARP_REQ", \ + [ELS_FARP_REPL] = "FARP_REPL", \ + [ELS_RPS] = "RPS", \ + [ELS_RPL] = "RPL", \ + [ELS_RPBC] = "RPBC", \ + [ELS_FAN] = "FAN", \ + [ELS_RSCN] = "RSCN", \ + [ELS_SCR] = "SCR", \ + [ELS_RNFT] = "RNFT", \ + [ELS_CSR] = "CSR", \ + [ELS_CSU] = "CSU", \ + [ELS_LINIT] = "LINIT", \ + [ELS_LSTS] = "LSTS", \ + [ELS_RNID] = "RNID", \ + [ELS_RLIR] = "RLIR", \ + [ELS_LIRR] = "LIRR", \ + [ELS_SRL] = "SRL", \ + [ELS_SBRP] = "SBRP", \ + [ELS_RPSC] = "RPSC", \ + [ELS_QSA] = "QSA", \ + [ELS_EVFP] = "EVFP", \ + [ELS_LKA] = "LKA", \ + [ELS_AUTH_ELS] = "AUTH_ELS", \ +} + +/* + * LS_ACC payload. + */ +struct fc_els_ls_acc { + __u8 la_cmd; /* command code ELS_LS_ACC */ + __u8 la_resv[3]; /* reserved */ +}; + +/* + * ELS reject payload. + */ +struct fc_els_ls_rjt { + __u8 er_cmd; /* command code ELS_LS_RJT */ + __u8 er_resv[4]; /* reserved must be zero */ + __u8 er_reason; /* reason (enum fc_els_rjt_reason below) */ + __u8 er_explan; /* explanation (enum fc_els_rjt_explan below) */ + __u8 er_vendor; /* vendor specific code */ +}; + +/* + * ELS reject reason codes (er_reason). + */ +enum fc_els_rjt_reason { + ELS_RJT_NONE = 0, /* no reject - not to be sent */ + ELS_RJT_INVAL = 0x01, /* invalid ELS command code */ + ELS_RJT_LOGIC = 0x03, /* logical error */ + ELS_RJT_BUSY = 0x05, /* logical busy */ + ELS_RJT_PROT = 0x07, /* protocol error */ + ELS_RJT_UNAB = 0x09, /* unable to perform command request */ + ELS_RJT_UNSUP = 0x0b, /* command not supported */ + ELS_RJT_INPROG = 0x0e, /* command already in progress */ + ELS_RJT_FIP = 0x20, /* FIP error */ + ELS_RJT_VENDOR = 0xff, /* vendor specific error */ +}; + + +/* + * reason code explanation (er_explan). + */ +enum fc_els_rjt_explan { + ELS_EXPL_NONE = 0x00, /* No additional explanation */ + ELS_EXPL_SPP_OPT_ERR = 0x01, /* service parameter error - options */ + ELS_EXPL_SPP_ICTL_ERR = 0x03, /* service parm error - initiator ctl */ + ELS_EXPL_AH = 0x11, /* invalid association header */ + ELS_EXPL_AH_REQ = 0x13, /* association_header required */ + ELS_EXPL_SID = 0x15, /* invalid originator S_ID */ + ELS_EXPL_OXID_RXID = 0x17, /* invalid OX_ID-RX_ID combination */ + ELS_EXPL_INPROG = 0x19, /* Request already in progress */ + ELS_EXPL_PLOGI_REQD = 0x1e, /* N_Port login required */ + ELS_EXPL_INSUF_RES = 0x29, /* insufficient resources */ + ELS_EXPL_UNAB_DATA = 0x2a, /* unable to supply requested data */ + ELS_EXPL_UNSUPR = 0x2c, /* Request not supported */ + ELS_EXPL_INV_LEN = 0x2d, /* Invalid payload length */ + ELS_EXPL_NOT_NEIGHBOR = 0x62, /* VN2VN_Port not in neighbor set */ + /* TBD - above definitions incomplete */ +}; + +/* + * Common service parameters (N ports). + */ +struct fc_els_csp { + __u8 sp_hi_ver; /* highest version supported (obs.) */ + __u8 sp_lo_ver; /* highest version supported (obs.) */ + __be16 sp_bb_cred; /* buffer-to-buffer credits */ + __be16 sp_features; /* common feature flags */ + __be16 sp_bb_data; /* b-b state number and data field sz */ + union { + struct { + __be16 _sp_tot_seq; /* total concurrent sequences */ + __be16 _sp_rel_off; /* rel. offset by info cat */ + } sp_plogi; + struct { + __be32 _sp_r_a_tov; /* resource alloc. timeout msec */ + } sp_flogi_acc; + } sp_u; + __be32 sp_e_d_tov; /* error detect timeout value */ +}; +#define sp_tot_seq sp_u.sp_plogi._sp_tot_seq +#define sp_rel_off sp_u.sp_plogi._sp_rel_off +#define sp_r_a_tov sp_u.sp_flogi_acc._sp_r_a_tov + +#define FC_SP_BB_DATA_MASK 0xfff /* mask for data field size in sp_bb_data */ + +/* + * Minimum and maximum values for max data field size in service parameters. + */ +#define FC_SP_MIN_MAX_PAYLOAD FC_MIN_MAX_PAYLOAD +#define FC_SP_MAX_MAX_PAYLOAD FC_MAX_PAYLOAD + +/* + * sp_features + */ +#define FC_SP_FT_NPIV 0x8000 /* multiple N_Port_ID support (FLOGI) */ +#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel off (PLOGI) */ +#define FC_SP_FT_CLAD 0x8000 /* clean address (in FLOGI LS_ACC) */ +#define FC_SP_FT_RAND 0x4000 /* random relative offset */ +#define FC_SP_FT_VAL 0x2000 /* valid vendor version level */ +#define FC_SP_FT_NPIV_ACC 0x2000 /* NPIV assignment (FLOGI LS_ACC) */ +#define FC_SP_FT_FPORT 0x1000 /* F port (1) vs. N port (0) */ +#define FC_SP_FT_ABB 0x0800 /* alternate BB_credit management */ +#define FC_SP_FT_EDTR 0x0400 /* E_D_TOV Resolution is nanoseconds */ +#define FC_SP_FT_MCAST 0x0200 /* multicast */ +#define FC_SP_FT_BCAST 0x0100 /* broadcast */ +#define FC_SP_FT_HUNT 0x0080 /* hunt group */ +#define FC_SP_FT_SIMP 0x0040 /* dedicated simplex */ +#define FC_SP_FT_SEC 0x0020 /* reserved for security */ +#define FC_SP_FT_CSYN 0x0010 /* clock synch. supported */ +#define FC_SP_FT_RTTOV 0x0008 /* R_T_TOV value 100 uS, else 100 mS */ +#define FC_SP_FT_HALF 0x0004 /* dynamic half duplex */ +#define FC_SP_FT_SEQC 0x0002 /* SEQ_CNT */ +#define FC_SP_FT_PAYL 0x0001 /* FLOGI payload length 256, else 116 */ + +/* + * Class-specific service parameters. + */ +struct fc_els_cssp { + __be16 cp_class; /* class flags */ + __be16 cp_init; /* initiator flags */ + __be16 cp_recip; /* recipient flags */ + __be16 cp_rdfs; /* receive data field size */ + __be16 cp_con_seq; /* concurrent sequences */ + __be16 cp_ee_cred; /* N-port end-to-end credit */ + __u8 cp_resv1; /* reserved */ + __u8 cp_open_seq; /* open sequences per exchange */ + __u8 _cp_resv2[2]; /* reserved */ +}; + +/* + * cp_class flags. + */ +#define FC_CPC_VALID 0x8000 /* class valid */ +#define FC_CPC_IMIX 0x4000 /* intermix mode */ +#define FC_CPC_SEQ 0x0800 /* sequential delivery */ +#define FC_CPC_CAMP 0x0200 /* camp-on */ +#define FC_CPC_PRI 0x0080 /* priority */ + +/* + * cp_init flags. + * (TBD: not all flags defined here). + */ +#define FC_CPI_CSYN 0x0010 /* clock synch. capable */ + +/* + * cp_recip flags. + */ +#define FC_CPR_CSYN 0x0008 /* clock synch. capable */ + +/* + * NFC_ELS_FLOGI: Fabric login request. + * NFC_ELS_PLOGI: Port login request (same format). + */ +struct fc_els_flogi { + __u8 fl_cmd; /* command */ + __u8 _fl_resvd[3]; /* must be zero */ + struct fc_els_csp fl_csp; /* common service parameters */ + __be64 fl_wwpn; /* port name */ + __be64 fl_wwnn; /* node name */ + struct fc_els_cssp fl_cssp[4]; /* class 1-4 service parameters */ + __u8 fl_vend[16]; /* vendor version level */ +} __attribute__((__packed__)); + +/* + * Process login service parameter page. + */ +struct fc_els_spp { + __u8 spp_type; /* type code or common service params */ + __u8 spp_type_ext; /* type code extension */ + __u8 spp_flags; + __u8 _spp_resvd; + __be32 spp_orig_pa; /* originator process associator */ + __be32 spp_resp_pa; /* responder process associator */ + __be32 spp_params; /* service parameters */ +}; + +/* + * spp_flags. + */ +#define FC_SPP_OPA_VAL 0x80 /* originator proc. assoc. valid */ +#define FC_SPP_RPA_VAL 0x40 /* responder proc. assoc. valid */ +#define FC_SPP_EST_IMG_PAIR 0x20 /* establish image pair */ +#define FC_SPP_RESP_MASK 0x0f /* mask for response code (below) */ + +/* + * SPP response code in spp_flags - lower 4 bits. + */ +enum fc_els_spp_resp { + FC_SPP_RESP_ACK = 1, /* request executed */ + FC_SPP_RESP_RES = 2, /* unable due to lack of resources */ + FC_SPP_RESP_INIT = 3, /* initialization not complete */ + FC_SPP_RESP_NO_PA = 4, /* unknown process associator */ + FC_SPP_RESP_CONF = 5, /* configuration precludes image pair */ + FC_SPP_RESP_COND = 6, /* request completed conditionally */ + FC_SPP_RESP_MULT = 7, /* unable to handle multiple SPPs */ + FC_SPP_RESP_INVL = 8, /* SPP is invalid */ +}; + +/* + * ELS_RRQ - Reinstate Recovery Qualifier + */ +struct fc_els_rrq { + __u8 rrq_cmd; /* command (0x12) */ + __u8 rrq_zero[3]; /* specified as zero - part of cmd */ + __u8 rrq_resvd; /* reserved */ + __u8 rrq_s_id[3]; /* originator FID */ + __be16 rrq_ox_id; /* originator exchange ID */ + __be16 rrq_rx_id; /* responders exchange ID */ +}; + +/* + * ELS_REC - Read exchange concise. + */ +struct fc_els_rec { + __u8 rec_cmd; /* command (0x13) */ + __u8 rec_zero[3]; /* specified as zero - part of cmd */ + __u8 rec_resvd; /* reserved */ + __u8 rec_s_id[3]; /* originator FID */ + __be16 rec_ox_id; /* originator exchange ID */ + __be16 rec_rx_id; /* responders exchange ID */ +}; + +/* + * ELS_REC LS_ACC payload. + */ +struct fc_els_rec_acc { + __u8 reca_cmd; /* accept (0x02) */ + __u8 reca_zero[3]; /* specified as zero - part of cmd */ + __be16 reca_ox_id; /* originator exchange ID */ + __be16 reca_rx_id; /* responders exchange ID */ + __u8 reca_resvd1; /* reserved */ + __u8 reca_ofid[3]; /* originator FID */ + __u8 reca_resvd2; /* reserved */ + __u8 reca_rfid[3]; /* responder FID */ + __be32 reca_fc4value; /* FC4 value */ + __be32 reca_e_stat; /* ESB (exchange status block) status */ +}; + +/* + * ELS_PRLI - Process login request and response. + */ +struct fc_els_prli { + __u8 prli_cmd; /* command */ + __u8 prli_spp_len; /* length of each serv. parm. page */ + __be16 prli_len; /* length of entire payload */ + /* service parameter pages follow */ +}; + +/* + * ELS_PRLO - Process logout request and response. + */ +struct fc_els_prlo { + __u8 prlo_cmd; /* command */ + __u8 prlo_obs; /* obsolete, but shall be set to 10h */ + __be16 prlo_len; /* payload length */ +}; + +/* + * ELS_ADISC payload + */ +struct fc_els_adisc { + __u8 adisc_cmd; + __u8 adisc_resv[3]; + __u8 adisc_resv1; + __u8 adisc_hard_addr[3]; + __be64 adisc_wwpn; + __be64 adisc_wwnn; + __u8 adisc_resv2; + __u8 adisc_port_id[3]; +} __attribute__((__packed__)); + +/* + * ELS_LOGO - process or fabric logout. + */ +struct fc_els_logo { + __u8 fl_cmd; /* command code */ + __u8 fl_zero[3]; /* specified as zero - part of cmd */ + __u8 fl_resvd; /* reserved */ + __u8 fl_n_port_id[3];/* N port ID */ + __be64 fl_n_port_wwn; /* port name */ +}; + +/* + * ELS_RTV - read timeout value. + */ +struct fc_els_rtv { + __u8 rtv_cmd; /* command code 0x0e */ + __u8 rtv_zero[3]; /* specified as zero - part of cmd */ +}; + +/* + * LS_ACC for ELS_RTV - read timeout value. + */ +struct fc_els_rtv_acc { + __u8 rtv_cmd; /* command code 0x02 */ + __u8 rtv_zero[3]; /* specified as zero - part of cmd */ + __be32 rtv_r_a_tov; /* resource allocation timeout value */ + __be32 rtv_e_d_tov; /* error detection timeout value */ + __be32 rtv_toq; /* timeout qualifier (see below) */ +}; + +/* + * rtv_toq bits. + */ +#define FC_ELS_RTV_EDRES (1 << 26) /* E_D_TOV resolution is nS else mS */ +#define FC_ELS_RTV_RTTOV (1 << 19) /* R_T_TOV is 100 uS else 100 mS */ + +/* + * ELS_SCR - state change registration payload. + */ +struct fc_els_scr { + __u8 scr_cmd; /* command code */ + __u8 scr_resv[6]; /* reserved */ + __u8 scr_reg_func; /* registration function (see below) */ +}; + +enum fc_els_scr_func { + ELS_SCRF_FAB = 1, /* fabric-detected registration */ + ELS_SCRF_NPORT = 2, /* Nx_Port-detected registration */ + ELS_SCRF_FULL = 3, /* full registration */ + ELS_SCRF_CLEAR = 255, /* remove any current registrations */ +}; + +/* + * ELS_RSCN - registered state change notification payload. + */ +struct fc_els_rscn { + __u8 rscn_cmd; /* RSCN opcode (0x61) */ + __u8 rscn_page_len; /* page length (4) */ + __be16 rscn_plen; /* payload length including this word */ + + /* followed by 4-byte generic affected Port_ID pages */ +}; + +struct fc_els_rscn_page { + __u8 rscn_page_flags; /* event and address format */ + __u8 rscn_fid[3]; /* fabric ID */ +}; + +#define ELS_RSCN_EV_QUAL_BIT 2 /* shift count for event qualifier */ +#define ELS_RSCN_EV_QUAL_MASK 0xf /* mask for event qualifier */ +#define ELS_RSCN_ADDR_FMT_BIT 0 /* shift count for address format */ +#define ELS_RSCN_ADDR_FMT_MASK 0x3 /* mask for address format */ + +enum fc_els_rscn_ev_qual { + ELS_EV_QUAL_NONE = 0, /* unspecified */ + ELS_EV_QUAL_NS_OBJ = 1, /* changed name server object */ + ELS_EV_QUAL_PORT_ATTR = 2, /* changed port attribute */ + ELS_EV_QUAL_SERV_OBJ = 3, /* changed service object */ + ELS_EV_QUAL_SW_CONFIG = 4, /* changed switch configuration */ + ELS_EV_QUAL_REM_OBJ = 5, /* removed object */ +}; + +enum fc_els_rscn_addr_fmt { + ELS_ADDR_FMT_PORT = 0, /* rscn_fid is a port address */ + ELS_ADDR_FMT_AREA = 1, /* rscn_fid is a area address */ + ELS_ADDR_FMT_DOM = 2, /* rscn_fid is a domain address */ + ELS_ADDR_FMT_FAB = 3, /* anything on fabric may have changed */ +}; + +/* + * ELS_RNID - request Node ID. + */ +struct fc_els_rnid { + __u8 rnid_cmd; /* RNID opcode (0x78) */ + __u8 rnid_resv[3]; /* reserved */ + __u8 rnid_fmt; /* data format */ + __u8 rnid_resv2[3]; /* reserved */ +}; + +/* + * Node Identification Data formats (rnid_fmt) + */ +enum fc_els_rnid_fmt { + ELS_RNIDF_NONE = 0, /* no specific identification data */ + ELS_RNIDF_GEN = 0xdf, /* general topology discovery format */ +}; + +/* + * ELS_RNID response. + */ +struct fc_els_rnid_resp { + __u8 rnid_cmd; /* response code (LS_ACC) */ + __u8 rnid_resv[3]; /* reserved */ + __u8 rnid_fmt; /* data format */ + __u8 rnid_cid_len; /* common ID data length */ + __u8 rnid_resv2; /* reserved */ + __u8 rnid_sid_len; /* specific ID data length */ +}; + +struct fc_els_rnid_cid { + __be64 rnid_wwpn; /* N port name */ + __be64 rnid_wwnn; /* node name */ +}; + +struct fc_els_rnid_gen { + __u8 rnid_vend_id[16]; /* vendor-unique ID */ + __be32 rnid_atype; /* associated type (see below) */ + __be32 rnid_phys_port; /* physical port number */ + __be32 rnid_att_nodes; /* number of attached nodes */ + __u8 rnid_node_mgmt; /* node management (see below) */ + __u8 rnid_ip_ver; /* IP version (see below) */ + __be16 rnid_prot_port; /* UDP / TCP port number */ + __be32 rnid_ip_addr[4]; /* IP address */ + __u8 rnid_resvd[2]; /* reserved */ + __be16 rnid_vend_spec; /* vendor-specific field */ +}; + +enum fc_els_rnid_atype { + ELS_RNIDA_UNK = 0x01, /* unknown */ + ELS_RNIDA_OTHER = 0x02, /* none of the following */ + ELS_RNIDA_HUB = 0x03, + ELS_RNIDA_SWITCH = 0x04, + ELS_RNIDA_GATEWAY = 0x05, + ELS_RNIDA_CONV = 0x06, /* Obsolete, do not use this value */ + ELS_RNIDA_HBA = 0x07, /* Obsolete, do not use this value */ + ELS_RNIDA_PROXY = 0x08, /* Obsolete, do not use this value */ + ELS_RNIDA_STORAGE = 0x09, + ELS_RNIDA_HOST = 0x0a, + ELS_RNIDA_SUBSYS = 0x0b, /* storage subsystem (e.g., RAID) */ + ELS_RNIDA_ACCESS = 0x0e, /* access device (e.g. media changer) */ + ELS_RNIDA_NAS = 0x11, /* NAS server */ + ELS_RNIDA_BRIDGE = 0x12, /* bridge */ + ELS_RNIDA_VIRT = 0x13, /* virtualization device */ + ELS_RNIDA_MF = 0xff, /* multifunction device (bits below) */ + ELS_RNIDA_MF_HUB = 1UL << 31, /* hub */ + ELS_RNIDA_MF_SW = 1UL << 30, /* switch */ + ELS_RNIDA_MF_GW = 1UL << 29, /* gateway */ + ELS_RNIDA_MF_ST = 1UL << 28, /* storage */ + ELS_RNIDA_MF_HOST = 1UL << 27, /* host */ + ELS_RNIDA_MF_SUB = 1UL << 26, /* storage subsystem */ + ELS_RNIDA_MF_ACC = 1UL << 25, /* storage access dev */ + ELS_RNIDA_MF_WDM = 1UL << 24, /* wavelength division mux */ + ELS_RNIDA_MF_NAS = 1UL << 23, /* NAS server */ + ELS_RNIDA_MF_BR = 1UL << 22, /* bridge */ + ELS_RNIDA_MF_VIRT = 1UL << 21, /* virtualization device */ +}; + +enum fc_els_rnid_mgmt { + ELS_RNIDM_SNMP = 0, + ELS_RNIDM_TELNET = 1, + ELS_RNIDM_HTTP = 2, + ELS_RNIDM_HTTPS = 3, + ELS_RNIDM_XML = 4, /* HTTP + XML */ +}; + +enum fc_els_rnid_ipver { + ELS_RNIDIP_NONE = 0, /* no IP support or node mgmt. */ + ELS_RNIDIP_V4 = 1, /* IPv4 */ + ELS_RNIDIP_V6 = 2, /* IPv6 */ +}; + +/* + * ELS RPL - Read Port List. + */ +struct fc_els_rpl { + __u8 rpl_cmd; /* command */ + __u8 rpl_resv[5]; /* reserved - must be zero */ + __be16 rpl_max_size; /* maximum response size or zero */ + __u8 rpl_resv1; /* reserved - must be zero */ + __u8 rpl_index[3]; /* starting index */ +}; + +/* + * Port number block in RPL response. + */ +struct fc_els_pnb { + __be32 pnb_phys_pn; /* physical port number */ + __u8 pnb_resv; /* reserved */ + __u8 pnb_port_id[3]; /* port ID */ + __be64 pnb_wwpn; /* port name */ +}; + +/* + * RPL LS_ACC response. + */ +struct fc_els_rpl_resp { + __u8 rpl_cmd; /* ELS_LS_ACC */ + __u8 rpl_resv1; /* reserved - must be zero */ + __be16 rpl_plen; /* payload length */ + __u8 rpl_resv2; /* reserved - must be zero */ + __u8 rpl_llen[3]; /* list length */ + __u8 rpl_resv3; /* reserved - must be zero */ + __u8 rpl_index[3]; /* starting index */ + struct fc_els_pnb rpl_pnb[1]; /* variable number of PNBs */ +}; + +/* + * Link Error Status Block. + */ +struct fc_els_lesb { + __be32 lesb_link_fail; /* link failure count */ + __be32 lesb_sync_loss; /* loss of synchronization count */ + __be32 lesb_sig_loss; /* loss of signal count */ + __be32 lesb_prim_err; /* primitive sequence error count */ + __be32 lesb_inv_word; /* invalid transmission word count */ + __be32 lesb_inv_crc; /* invalid CRC count */ +}; + +/* + * ELS RPS - Read Port Status Block request. + */ +struct fc_els_rps { + __u8 rps_cmd; /* command */ + __u8 rps_resv[2]; /* reserved - must be zero */ + __u8 rps_flag; /* flag - see below */ + __be64 rps_port_spec; /* port selection */ +}; + +enum fc_els_rps_flag { + FC_ELS_RPS_DID = 0x00, /* port identified by D_ID of req. */ + FC_ELS_RPS_PPN = 0x01, /* port_spec is physical port number */ + FC_ELS_RPS_WWPN = 0x02, /* port_spec is port WWN */ +}; + +/* + * ELS RPS LS_ACC response. + */ +struct fc_els_rps_resp { + __u8 rps_cmd; /* command - LS_ACC */ + __u8 rps_resv[2]; /* reserved - must be zero */ + __u8 rps_flag; /* flag - see below */ + __u8 rps_resv2[2]; /* reserved */ + __be16 rps_status; /* port status - see below */ + struct fc_els_lesb rps_lesb; /* link error status block */ +}; + +enum fc_els_rps_resp_flag { + FC_ELS_RPS_LPEV = 0x01, /* L_port extension valid */ +}; + +enum fc_els_rps_resp_status { + FC_ELS_RPS_PTP = 1 << 5, /* point-to-point connection */ + FC_ELS_RPS_LOOP = 1 << 4, /* loop mode */ + FC_ELS_RPS_FAB = 1 << 3, /* fabric present */ + FC_ELS_RPS_NO_SIG = 1 << 2, /* loss of signal */ + FC_ELS_RPS_NO_SYNC = 1 << 1, /* loss of synchronization */ + FC_ELS_RPS_RESET = 1 << 0, /* in link reset protocol */ +}; + +/* + * ELS LIRR - Link Incident Record Registration request. + */ +struct fc_els_lirr { + __u8 lirr_cmd; /* command */ + __u8 lirr_resv[3]; /* reserved - must be zero */ + __u8 lirr_func; /* registration function */ + __u8 lirr_fmt; /* FC-4 type of RLIR requested */ + __u8 lirr_resv2[2]; /* reserved - must be zero */ +}; + +enum fc_els_lirr_func { + ELS_LIRR_SET_COND = 0x01, /* set - conditionally receive */ + ELS_LIRR_SET_UNCOND = 0x02, /* set - unconditionally receive */ + ELS_LIRR_CLEAR = 0xff /* clear registration */ +}; + +/* + * ELS SRL - Scan Remote Loop request. + */ +struct fc_els_srl { + __u8 srl_cmd; /* command */ + __u8 srl_resv[3]; /* reserved - must be zero */ + __u8 srl_flag; /* flag - see below */ + __u8 srl_flag_param[3]; /* flag parameter */ +}; + +enum fc_els_srl_flag { + FC_ELS_SRL_ALL = 0x00, /* scan all FL ports */ + FC_ELS_SRL_ONE = 0x01, /* scan specified loop */ + FC_ELS_SRL_EN_PER = 0x02, /* enable periodic scanning (param) */ + FC_ELS_SRL_DIS_PER = 0x03, /* disable periodic scanning */ +}; + +/* + * ELS RLS - Read Link Error Status Block request. + */ +struct fc_els_rls { + __u8 rls_cmd; /* command */ + __u8 rls_resv[4]; /* reserved - must be zero */ + __u8 rls_port_id[3]; /* port ID */ +}; + +/* + * ELS RLS LS_ACC Response. + */ +struct fc_els_rls_resp { + __u8 rls_cmd; /* ELS_LS_ACC */ + __u8 rls_resv[3]; /* reserved - must be zero */ + struct fc_els_lesb rls_lesb; /* link error status block */ +}; + +/* + * ELS RLIR - Registered Link Incident Report. + * This is followed by the CLIR and the CLID, described below. + */ +struct fc_els_rlir { + __u8 rlir_cmd; /* command */ + __u8 rlir_resv[3]; /* reserved - must be zero */ + __u8 rlir_fmt; /* format (FC4-type if type specific) */ + __u8 rlir_clr_len; /* common link incident record length */ + __u8 rlir_cld_len; /* common link incident desc. length */ + __u8 rlir_slr_len; /* spec. link incident record length */ +}; + +/* + * CLIR - Common Link Incident Record Data. - Sent via RLIR. + */ +struct fc_els_clir { + __be64 clir_wwpn; /* incident port name */ + __be64 clir_wwnn; /* incident port node name */ + __u8 clir_port_type; /* incident port type */ + __u8 clir_port_id[3]; /* incident port ID */ + + __be64 clir_conn_wwpn; /* connected port name */ + __be64 clir_conn_wwnn; /* connected node name */ + __be64 clir_fab_name; /* fabric name */ + __be32 clir_phys_port; /* physical port number */ + __be32 clir_trans_id; /* transaction ID */ + __u8 clir_resv[3]; /* reserved */ + __u8 clir_ts_fmt; /* time stamp format */ + __be64 clir_timestamp; /* time stamp */ +}; + +/* + * CLIR clir_ts_fmt - time stamp format values. + */ +enum fc_els_clir_ts_fmt { + ELS_CLIR_TS_UNKNOWN = 0, /* time stamp field unknown */ + ELS_CLIR_TS_SEC_FRAC = 1, /* time in seconds and fractions */ + ELS_CLIR_TS_CSU = 2, /* time in clock synch update format */ +}; + +/* + * Common Link Incident Descriptor - sent via RLIR. + */ +struct fc_els_clid { + __u8 clid_iq; /* incident qualifier flags */ + __u8 clid_ic; /* incident code */ + __be16 clid_epai; /* domain/area of ISL */ +}; + +/* + * CLID incident qualifier flags. + */ +enum fc_els_clid_iq { + ELS_CLID_SWITCH = 0x20, /* incident port is a switch node */ + ELS_CLID_E_PORT = 0x10, /* incident is an ISL (E) port */ + ELS_CLID_SEV_MASK = 0x0c, /* severity 2-bit field mask */ + ELS_CLID_SEV_INFO = 0x00, /* report is informational */ + ELS_CLID_SEV_INOP = 0x08, /* link not operational */ + ELS_CLID_SEV_DEG = 0x04, /* link degraded but operational */ + ELS_CLID_LASER = 0x02, /* subassembly is a laser */ + ELS_CLID_FRU = 0x01, /* format can identify a FRU */ +}; + +/* + * CLID incident code. + */ +enum fc_els_clid_ic { + ELS_CLID_IC_IMPL = 1, /* implicit incident */ + ELS_CLID_IC_BER = 2, /* bit-error-rate threshold exceeded */ + ELS_CLID_IC_LOS = 3, /* loss of synch or signal */ + ELS_CLID_IC_NOS = 4, /* non-operational primitive sequence */ + ELS_CLID_IC_PST = 5, /* primitive sequence timeout */ + ELS_CLID_IC_INVAL = 6, /* invalid primitive sequence */ + ELS_CLID_IC_LOOP_TO = 7, /* loop initialization time out */ + ELS_CLID_IC_LIP = 8, /* receiving LIP */ +}; + +#endif /* _FC_ELS_H_ */ diff --git a/include/uapi/scsi/fc/fc_fs.h b/include/uapi/scsi/fc/fc_fs.h new file mode 100644 index 0000000..50f28b1 --- /dev/null +++ b/include/uapi/scsi/fc/fc_fs.h @@ -0,0 +1,348 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FS_H_ +#define _FC_FS_H_ + +#include + +/* + * Fibre Channel Framing and Signalling definitions. + * From T11 FC-FS-2 Rev 0.90 - 9 August 2005. + */ + +/* + * Frame header + */ +struct fc_frame_header { + __u8 fh_r_ctl; /* routing control */ + __u8 fh_d_id[3]; /* Destination ID */ + + __u8 fh_cs_ctl; /* class of service control / pri */ + __u8 fh_s_id[3]; /* Source ID */ + + __u8 fh_type; /* see enum fc_fh_type below */ + __u8 fh_f_ctl[3]; /* frame control */ + + __u8 fh_seq_id; /* sequence ID */ + __u8 fh_df_ctl; /* data field control */ + __be16 fh_seq_cnt; /* sequence count */ + + __be16 fh_ox_id; /* originator exchange ID */ + __be16 fh_rx_id; /* responder exchange ID */ + __be32 fh_parm_offset; /* parameter or relative offset */ +}; + +#define FC_FRAME_HEADER_LEN 24 /* expected length of structure */ + +#define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */ +#define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */ + +#define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) +#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) + +/* + * fh_r_ctl - Routing control definitions. + */ + /* + * FC-4 device_data. + */ +enum fc_rctl { + FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */ + FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */ + FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */ + FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */ + FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */ + FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */ + FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */ + FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */ + +#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */ +#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */ + + /* + * Extended Link_Data + */ + FC_RCTL_ELS_REQ = 0x22, /* extended link services request */ + FC_RCTL_ELS_REP = 0x23, /* extended link services reply */ + FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */ + FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */ + /* + * Optional Extended Headers + */ + FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */ + FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */ + FC_RCTL_ENCH = 0x52, /* encapsulation header */ + /* + * Basic Link Services fh_r_ctl values. + */ + FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */ + FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */ + FC_RCTL_BA_RMC = 0x82, /* remove connection */ + FC_RCTL_BA_ACC = 0x84, /* basic accept */ + FC_RCTL_BA_RJT = 0x85, /* basic reject */ + FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */ + /* + * Link Control Information. + */ + FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */ + FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */ + FC_RCTL_P_RJT = 0xc2, /* port reject */ + FC_RCTL_F_RJT = 0xc3, /* fabric reject */ + FC_RCTL_P_BSY = 0xc4, /* port busy */ + FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */ + FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */ + FC_RCTL_LCR = 0xc7, /* link credit reset */ + FC_RCTL_END = 0xc9, /* end */ +}; + /* incomplete list of definitions */ + +/* + * R_CTL names initializer. + * Please keep this matching the above definitions. + */ +#define FC_RCTL_NAMES_INIT { \ + [FC_RCTL_DD_UNCAT] = "uncat", \ + [FC_RCTL_DD_SOL_DATA] = "sol data", \ + [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \ + [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \ + [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \ + [FC_RCTL_DD_DATA_DESC] = "data desc", \ + [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \ + [FC_RCTL_DD_CMD_STATUS] = "cmd status", \ + [FC_RCTL_ELS_REQ] = "ELS req", \ + [FC_RCTL_ELS_REP] = "ELS rep", \ + [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \ + [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \ + [FC_RCTL_BA_NOP] = "BLS NOP", \ + [FC_RCTL_BA_ABTS] = "BLS abort", \ + [FC_RCTL_BA_RMC] = "BLS remove connection", \ + [FC_RCTL_BA_ACC] = "BLS accept", \ + [FC_RCTL_BA_RJT] = "BLS reject", \ + [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \ + [FC_RCTL_ACK_1] = "LC ACK_1", \ + [FC_RCTL_ACK_0] = "LC ACK_0", \ + [FC_RCTL_P_RJT] = "LC port reject", \ + [FC_RCTL_F_RJT] = "LC fabric reject", \ + [FC_RCTL_P_BSY] = "LC port busy", \ + [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \ + [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\ + [FC_RCTL_LCR] = "LC link credit reset", \ + [FC_RCTL_END] = "LC end", \ +} + +/* + * Well-known fabric addresses. + */ +enum fc_well_known_fid { + FC_FID_NONE = 0x000000, /* No destination */ + FC_FID_BCAST = 0xffffff, /* broadcast */ + FC_FID_FLOGI = 0xfffffe, /* fabric login */ + FC_FID_FCTRL = 0xfffffd, /* fabric controller */ + FC_FID_DIR_SERV = 0xfffffc, /* directory server */ + FC_FID_TIME_SERV = 0xfffffb, /* time server */ + FC_FID_MGMT_SERV = 0xfffffa, /* management server */ + FC_FID_QOS = 0xfffff9, /* QoS Facilitator */ + FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */ + FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */ + FC_FID_CLOCK = 0xfffff6, /* clock synch server */ + FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */ +}; + +#define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */ +#define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */ + +/* + * Other well-known addresses, outside the above contiguous range. + */ +#define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */ + +/* + * Fabric ID bytes. + */ +#define FC_FID_DOMAIN 0 +#define FC_FID_PORT 1 +#define FC_FID_LINK 2 + +/* + * fh_type codes + */ +enum fc_fh_type { + FC_TYPE_BLS = 0x00, /* basic link service */ + FC_TYPE_ELS = 0x01, /* extended link service */ + FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */ + FC_TYPE_FCP = 0x08, /* SCSI FCP */ + FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */ + FC_TYPE_ILS = 0x22, /* internal link service */ +}; + +/* + * FC_TYPE names initializer. + * Please keep this matching the above definitions. + */ +#define FC_TYPE_NAMES_INIT { \ + [FC_TYPE_BLS] = "BLS", \ + [FC_TYPE_ELS] = "ELS", \ + [FC_TYPE_IP] = "IP", \ + [FC_TYPE_FCP] = "FCP", \ + [FC_TYPE_CT] = "CT", \ + [FC_TYPE_ILS] = "ILS", \ +} + +/* + * Exchange IDs. + */ +#define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */ +#define FC_XID_MIN 0x0 /* supported min exchange ID */ +#define FC_XID_MAX 0xfffe /* supported max exchange ID */ + +/* + * fh_f_ctl - Frame control flags. + */ +#define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */ +#define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */ +#define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */ +#define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */ +#define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */ +#define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */ +#define FC_FC_RES_B17 (1 << 17) /* reserved */ +#define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */ +#define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */ +#define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */ + +#define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */ +#define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */ +#define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */ + +#define FC_FC_RES_B11 (1 << 11) /* reserved */ +#define FC_FC_RES_B10 (1 << 10) /* reserved */ +#define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */ +#define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */ +#define FC_FC_CONT_SEQ(i) ((i) << 6) +#define FC_FC_ABT_SEQ(i) ((i) << 4) +#define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */ +#define FC_FC_RES2 (1 << 2) /* reserved */ +#define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */ + +/* + * BA_ACC payload. + */ +struct fc_ba_acc { + __u8 ba_seq_id_val; /* SEQ_ID validity */ +#define FC_BA_SEQ_ID_VAL 0x80 + __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */ + __u8 ba_resvd[2]; /* reserved */ + __be16 ba_ox_id; /* OX_ID for aborted seq or exch */ + __be16 ba_rx_id; /* RX_ID for aborted seq or exch */ + __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */ + __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */ +}; + +/* + * BA_RJT: Basic Reject payload. + */ +struct fc_ba_rjt { + __u8 br_resvd; /* reserved */ + __u8 br_reason; /* reason code */ + __u8 br_explan; /* reason explanation */ + __u8 br_vendor; /* vendor unique code */ +}; + +/* + * BA_RJT reason codes. + * From FS-2. + */ +enum fc_ba_rjt_reason { + FC_BA_RJT_NONE = 0, /* in software this means no reject */ + FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */ + FC_BA_RJT_LOG_ERR = 0x03, /* logical error */ + FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */ + FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */ + FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */ + FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */ +}; + +/* + * BA_RJT reason code explanations. + */ +enum fc_ba_rjt_explan { + FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */ + FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */ + FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */ +}; + +/* + * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field. + */ +struct fc_pf_rjt { + __u8 rj_action; /* reserved */ + __u8 rj_reason; /* reason code */ + __u8 rj_resvd; /* reserved */ + __u8 rj_vendor; /* vendor unique code */ +}; + +/* + * P_RJT and F_RJT reject reason codes. + */ +enum fc_pf_rjt_reason { + FC_RJT_NONE = 0, /* non-reject (reserved by standard) */ + FC_RJT_INVL_DID = 0x01, /* invalid destination ID */ + FC_RJT_INVL_SID = 0x02, /* invalid source ID */ + FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */ + FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */ + FC_RJT_CLS_UNSUP = 0x05, /* class not supported */ + FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */ + FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */ + FC_RJT_LINK_CTL = 0x08, /* invalid link control */ + FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */ + FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */ + FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */ + FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */ + FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */ + FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */ + FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */ + FC_RJT_PARAM = 0x10, /* invalid parameter field */ + FC_RJT_EXCH_ERR = 0x11, /* exchange error */ + FC_RJT_PROTO = 0x12, /* protocol error */ + FC_RJT_LEN = 0x13, /* incorrect length */ + FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */ + FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */ + FC_RJT_LOGI_REQ = 0x16, /* login required */ + FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */ + FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */ + FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */ + FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */ + FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */ + FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */ + FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */ + FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */ + FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */ + FC_RJT_MCAST_ERR = 0x22, /* multicast error */ + FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */ + FC_RJT_PRLI_REQ = 0x24, /* process login required */ + FC_RJT_INVL_ATT = 0x25, /* invalid attachment */ + FC_RJT_VENDOR = 0xff, /* vendor specific reject */ +}; + +/* default timeout values */ + +#define FC_DEF_E_D_TOV 2000UL +#define FC_DEF_R_A_TOV 10000UL + +#endif /* _FC_FS_H_ */ diff --git a/include/uapi/scsi/fc/fc_gs.h b/include/uapi/scsi/fc/fc_gs.h new file mode 100644 index 0000000..a37346d --- /dev/null +++ b/include/uapi/scsi/fc/fc_gs.h @@ -0,0 +1,96 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_GS_H_ +#define _FC_GS_H_ + +#include + +/* + * Fibre Channel Services - Common Transport. + * From T11.org FC-GS-2 Rev 5.3 November 1998. + */ + +struct fc_ct_hdr { + __u8 ct_rev; /* revision */ + __u8 ct_in_id[3]; /* N_Port ID of original requestor */ + __u8 ct_fs_type; /* type of fibre channel service */ + __u8 ct_fs_subtype; /* subtype */ + __u8 ct_options; + __u8 _ct_resvd1; + __be16 ct_cmd; /* command / response code */ + __be16 ct_mr_size; /* maximum / residual size */ + __u8 _ct_resvd2; + __u8 ct_reason; /* reject reason */ + __u8 ct_explan; /* reason code explanation */ + __u8 ct_vendor; /* vendor unique data */ +}; + +#define FC_CT_HDR_LEN 16 /* expected sizeof (struct fc_ct_hdr) */ + +enum fc_ct_rev { + FC_CT_REV = 1 /* common transport revision */ +}; + +/* + * ct_fs_type values. + */ +enum fc_ct_fs_type { + FC_FST_ALIAS = 0xf8, /* alias service */ + FC_FST_MGMT = 0xfa, /* management service */ + FC_FST_TIME = 0xfb, /* time service */ + FC_FST_DIR = 0xfc, /* directory service */ +}; + +/* + * ct_cmd: Command / response codes + */ +enum fc_ct_cmd { + FC_FS_RJT = 0x8001, /* reject */ + FC_FS_ACC = 0x8002, /* accept */ +}; + +/* + * FS_RJT reason codes. + */ +enum fc_ct_reason { + FC_FS_RJT_CMD = 0x01, /* invalid command code */ + FC_FS_RJT_VER = 0x02, /* invalid version level */ + FC_FS_RJT_LOG = 0x03, /* logical error */ + FC_FS_RJT_IUSIZ = 0x04, /* invalid IU size */ + FC_FS_RJT_BSY = 0x05, /* logical busy */ + FC_FS_RJT_PROTO = 0x07, /* protocol error */ + FC_FS_RJT_UNABL = 0x09, /* unable to perform command request */ + FC_FS_RJT_UNSUP = 0x0b, /* command not supported */ +}; + +/* + * FS_RJT reason code explanations. + */ +enum fc_ct_explan { + FC_FS_EXP_NONE = 0x00, /* no additional explanation */ + FC_FS_EXP_PID = 0x01, /* port ID not registered */ + FC_FS_EXP_PNAM = 0x02, /* port name not registered */ + FC_FS_EXP_NNAM = 0x03, /* node name not registered */ + FC_FS_EXP_COS = 0x04, /* class of service not registered */ + FC_FS_EXP_FTNR = 0x07, /* FC-4 types not registered */ + /* definitions not complete */ +}; + +#endif /* _FC_GS_H_ */ diff --git a/include/uapi/scsi/fc/fc_ns.h b/include/uapi/scsi/fc/fc_ns.h new file mode 100644 index 0000000..f7751d5 --- /dev/null +++ b/include/uapi/scsi/fc/fc_ns.h @@ -0,0 +1,208 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_NS_H_ +#define _FC_NS_H_ + +#include + +/* + * Fibre Channel Services - Name Service (dNS) + * From T11.org FC-GS-2 Rev 5.3 November 1998. + */ + +/* + * Common-transport sub-type for Name Server. + */ +#define FC_NS_SUBTYPE 2 /* fs_ct_hdr.ct_fs_subtype */ + +/* + * Name server Requests. + * Note: this is an incomplete list, some unused requests are omitted. + */ +enum fc_ns_req { + FC_NS_GA_NXT = 0x0100, /* get all next */ + FC_NS_GI_A = 0x0101, /* get identifiers - scope */ + FC_NS_GPN_ID = 0x0112, /* get port name by ID */ + FC_NS_GNN_ID = 0x0113, /* get node name by ID */ + FC_NS_GSPN_ID = 0x0118, /* get symbolic port name */ + FC_NS_GID_PN = 0x0121, /* get ID for port name */ + FC_NS_GID_NN = 0x0131, /* get IDs for node name */ + FC_NS_GID_FT = 0x0171, /* get IDs by FC4 type */ + FC_NS_GPN_FT = 0x0172, /* get port names by FC4 type */ + FC_NS_GID_PT = 0x01a1, /* get IDs by port type */ + FC_NS_RPN_ID = 0x0212, /* reg port name for ID */ + FC_NS_RNN_ID = 0x0213, /* reg node name for ID */ + FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */ + FC_NS_RSPN_ID = 0x0218, /* reg symbolic port name */ + FC_NS_RFF_ID = 0x021f, /* reg FC4 Features for ID */ + FC_NS_RSNN_NN = 0x0239, /* reg symbolic node name */ +}; + +/* + * Port type values. + */ +enum fc_ns_pt { + FC_NS_UNID_PORT = 0x00, /* unidentified */ + FC_NS_N_PORT = 0x01, /* N port */ + FC_NS_NL_PORT = 0x02, /* NL port */ + FC_NS_FNL_PORT = 0x03, /* F/NL port */ + FC_NS_NX_PORT = 0x7f, /* Nx port */ + FC_NS_F_PORT = 0x81, /* F port */ + FC_NS_FL_PORT = 0x82, /* FL port */ + FC_NS_E_PORT = 0x84, /* E port */ + FC_NS_B_PORT = 0x85, /* B port */ +}; + +/* + * Port type object. + */ +struct fc_ns_pt_obj { + __u8 pt_type; +}; + +/* + * Port ID object + */ +struct fc_ns_fid { + __u8 fp_flags; /* flags for responses only */ + __u8 fp_fid[3]; +}; + +/* + * fp_flags in port ID object, for responses only. + */ +#define FC_NS_FID_LAST 0x80 /* last object */ + +/* + * FC4-types object. + */ +#define FC_NS_TYPES 256 /* number of possible FC-4 types */ +#define FC_NS_BPW 32 /* bits per word in bitmap */ + +struct fc_ns_fts { + __be32 ff_type_map[FC_NS_TYPES / FC_NS_BPW]; /* bitmap of FC-4 types */ +}; + +/* + * FC4-features object. + */ +struct fc_ns_ff { + __be32 fd_feat[FC_NS_TYPES * 4 / FC_NS_BPW]; /* 4-bits per FC-type */ +}; + +/* + * GID_PT request. + */ +struct fc_ns_gid_pt { + __u8 fn_pt_type; + __u8 fn_domain_id_scope; + __u8 fn_area_id_scope; + __u8 fn_resvd; +}; + +/* + * GID_FT or GPN_FT request. + */ +struct fc_ns_gid_ft { + __u8 fn_resvd; + __u8 fn_domain_id_scope; + __u8 fn_area_id_scope; + __u8 fn_fc4_type; +}; + +/* + * GPN_FT response. + */ +struct fc_gpn_ft_resp { + __u8 fp_flags; /* see fp_flags definitions above */ + __u8 fp_fid[3]; /* port ID */ + __be32 fp_resvd; + __be64 fp_wwpn; /* port name */ +}; + +/* + * GID_PN request + */ +struct fc_ns_gid_pn { + __be64 fn_wwpn; /* port name */ +}; + +/* + * GID_PN response or GSPN_ID request + */ +struct fc_gid_pn_resp { + __u8 fp_resvd; + __u8 fp_fid[3]; /* port ID */ +}; + +/* + * GSPN_ID response + */ +struct fc_gspn_resp { + __u8 fp_name_len; + char fp_name[]; +}; + +/* + * RFT_ID request - register FC-4 types for ID. + */ +struct fc_ns_rft_id { + struct fc_ns_fid fr_fid; /* port ID object */ + struct fc_ns_fts fr_fts; /* FC-4 types object */ +}; + +/* + * RPN_ID request - register port name for ID. + * RNN_ID request - register node name for ID. + */ +struct fc_ns_rn_id { + struct fc_ns_fid fr_fid; /* port ID object */ + __be64 fr_wwn; /* node name or port name */ +} __attribute__((__packed__)); + +/* + * RSNN_NN request - register symbolic node name + */ +struct fc_ns_rsnn { + __be64 fr_wwn; /* node name */ + __u8 fr_name_len; + char fr_name[]; +} __attribute__((__packed__)); + +/* + * RSPN_ID request - register symbolic port name + */ +struct fc_ns_rspn { + struct fc_ns_fid fr_fid; /* port ID object */ + __u8 fr_name_len; + char fr_name[]; +} __attribute__((__packed__)); + +/* + * RFF_ID request - register FC-4 Features for ID. + */ +struct fc_ns_rff_id { + struct fc_ns_fid fr_fid; /* port ID object */ + __u8 fr_resvd[2]; + __u8 fr_feat; /* FC-4 Feature bits */ + __u8 fr_type; /* FC-4 type */ +} __attribute__((__packed__)); + +#endif /* _FC_NS_H_ */ diff --git a/include/uapi/scsi/scsi_bsg_fc.h b/include/uapi/scsi/scsi_bsg_fc.h new file mode 100644 index 0000000..3031b90 --- /dev/null +++ b/include/uapi/scsi/scsi_bsg_fc.h @@ -0,0 +1,320 @@ +/* + * FC Transport BSG Interface + * + * Copyright (C) 2008 James Smart, Emulex Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef SCSI_BSG_FC_H +#define SCSI_BSG_FC_H + +/* + * This file intended to be included by both kernel and user space + */ + +/* + * FC Transport SGIO v4 BSG Message Support + */ + +/* Default BSG request timeout (in seconds) */ +#define FC_DEFAULT_BSG_TIMEOUT (10 * HZ) + + +/* + * Request Message Codes supported by the FC Transport + */ + +/* define the class masks for the message codes */ +#define FC_BSG_CLS_MASK 0xF0000000 /* find object class */ +#define FC_BSG_HST_MASK 0x80000000 /* fc host class */ +#define FC_BSG_RPT_MASK 0x40000000 /* fc rport class */ + + /* fc_host Message Codes */ +#define FC_BSG_HST_ADD_RPORT (FC_BSG_HST_MASK | 0x00000001) +#define FC_BSG_HST_DEL_RPORT (FC_BSG_HST_MASK | 0x00000002) +#define FC_BSG_HST_ELS_NOLOGIN (FC_BSG_HST_MASK | 0x00000003) +#define FC_BSG_HST_CT (FC_BSG_HST_MASK | 0x00000004) +#define FC_BSG_HST_VENDOR (FC_BSG_HST_MASK | 0x000000FF) + + /* fc_rport Message Codes */ +#define FC_BSG_RPT_ELS (FC_BSG_RPT_MASK | 0x00000001) +#define FC_BSG_RPT_CT (FC_BSG_RPT_MASK | 0x00000002) + + + +/* + * FC Address Identifiers in Message Structures : + * + * Whenever a command payload contains a FC Address Identifier + * (aka port_id), the value is effectively in big-endian + * order, thus the array elements are decoded as follows: + * element [0] is bits 23:16 of the FC Address Identifier + * element [1] is bits 15:8 of the FC Address Identifier + * element [2] is bits 7:0 of the FC Address Identifier + */ + + +/* + * FC Host Messages + */ + +/* FC_BSG_HST_ADDR_PORT : */ + +/* Request: + * This message requests the FC host to login to the remote port + * at the specified N_Port_Id. The remote port is to be enumerated + * with the transport upon completion of the login. + */ +struct fc_bsg_host_add_rport { + uint8_t reserved; + + /* FC Address Identier of the remote port to login to */ + uint8_t port_id[3]; +}; + +/* Response: + * There is no additional response data - fc_bsg_reply->result is sufficient + */ + + +/* FC_BSG_HST_DEL_RPORT : */ + +/* Request: + * This message requests the FC host to remove an enumerated + * remote port and to terminate the login to it. + * + * Note: The driver is free to reject this request if it desires to + * remain logged in with the remote port. + */ +struct fc_bsg_host_del_rport { + uint8_t reserved; + + /* FC Address Identier of the remote port to logout of */ + uint8_t port_id[3]; +}; + +/* Response: + * There is no additional response data - fc_bsg_reply->result is sufficient + */ + + +/* FC_BSG_HST_ELS_NOLOGIN : */ + +/* Request: + * This message requests the FC_Host to send an ELS to a specific + * N_Port_ID. The host does not need to log into the remote port, + * nor does it need to enumerate the rport for further traffic + * (although, the FC host is free to do so if it desires). + */ +struct fc_bsg_host_els { + /* + * ELS Command Code being sent (must be the same as byte 0 + * of the payload) + */ + uint8_t command_code; + + /* FC Address Identier of the remote port to send the ELS to */ + uint8_t port_id[3]; +}; + +/* Response: + */ +/* fc_bsg_ctels_reply->status values */ +#define FC_CTELS_STATUS_OK 0x00000000 +#define FC_CTELS_STATUS_REJECT 0x00000001 +#define FC_CTELS_STATUS_P_RJT 0x00000002 +#define FC_CTELS_STATUS_F_RJT 0x00000003 +#define FC_CTELS_STATUS_P_BSY 0x00000004 +#define FC_CTELS_STATUS_F_BSY 0x00000006 +struct fc_bsg_ctels_reply { + /* + * Note: An ELS LS_RJT may be reported in 2 ways: + * a) A status of FC_CTELS_STATUS_OK is returned. The caller + * is to look into the ELS receive payload to determine + * LS_ACC or LS_RJT (by contents of word 0). The reject + * data will be in word 1. + * b) A status of FC_CTELS_STATUS_REJECT is returned, The + * rjt_data field will contain valid data. + * + * Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and + * the receive payload word 0 indicates LS_ACC + * (e.g. value is 0x02xxxxxx). + * + * Note: Similarly, a CT Reject may be reported in 2 ways: + * a) A status of FC_CTELS_STATUS_OK is returned. The caller + * is to look into the CT receive payload to determine + * Accept or Reject (by contents of word 2). The reject + * data will be in word 3. + * b) A status of FC_CTELS_STATUS_REJECT is returned, The + * rjt_data field will contain valid data. + * + * Note: x_RJT/BSY status will indicae that the rjt_data field + * is valid and contains the reason/explanation values. + */ + uint32_t status; /* See FC_CTELS_STATUS_xxx */ + + /* valid if status is not FC_CTELS_STATUS_OK */ + struct { + uint8_t action; /* fragment_id for CT REJECT */ + uint8_t reason_code; + uint8_t reason_explanation; + uint8_t vendor_unique; + } rjt_data; +}; + + +/* FC_BSG_HST_CT : */ + +/* Request: + * This message requests that a CT Request be performed with the + * indicated N_Port_ID. The driver is responsible for logging in with + * the fabric and/or N_Port_ID, etc as per FC rules. This request does + * not mandate that the driver must enumerate the destination in the + * transport. The driver is allowed to decide whether to enumerate it, + * and whether to tear it down after the request. + */ +struct fc_bsg_host_ct { + uint8_t reserved; + + /* FC Address Identier of the remote port to send the ELS to */ + uint8_t port_id[3]; + + /* + * We need words 0-2 of the generic preamble for the LLD's + */ + uint32_t preamble_word0; /* revision & IN_ID */ + uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ + uint32_t preamble_word2; /* Cmd Code, Max Size */ + +}; +/* Response: + * + * The reply structure is an fc_bsg_ctels_reply structure + */ + + +/* FC_BSG_HST_VENDOR : */ + +/* Request: + * Note: When specifying vendor_id, be sure to read the Vendor Type and ID + * formatting requirements specified in scsi_netlink.h + */ +struct fc_bsg_host_vendor { + /* + * Identifies the vendor that the message is formatted for. This + * should be the recipient of the message. + */ + uint64_t vendor_id; + + /* start of vendor command area */ + uint32_t vendor_cmd[0]; +}; + +/* Response: + */ +struct fc_bsg_host_vendor_reply { + /* start of vendor response area */ + uint32_t vendor_rsp[0]; +}; + + + +/* + * FC Remote Port Messages + */ + +/* FC_BSG_RPT_ELS : */ + +/* Request: + * This message requests that an ELS be performed with the rport. + */ +struct fc_bsg_rport_els { + /* + * ELS Command Code being sent (must be the same as + * byte 0 of the payload) + */ + uint8_t els_code; +}; + +/* Response: + * + * The reply structure is an fc_bsg_ctels_reply structure + */ + + +/* FC_BSG_RPT_CT : */ + +/* Request: + * This message requests that a CT Request be performed with the rport. + */ +struct fc_bsg_rport_ct { + /* + * We need words 0-2 of the generic preamble for the LLD's + */ + uint32_t preamble_word0; /* revision & IN_ID */ + uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ + uint32_t preamble_word2; /* Cmd Code, Max Size */ +}; +/* Response: + * + * The reply structure is an fc_bsg_ctels_reply structure + */ + + + + +/* request (CDB) structure of the sg_io_v4 */ +struct fc_bsg_request { + uint32_t msgcode; + union { + struct fc_bsg_host_add_rport h_addrport; + struct fc_bsg_host_del_rport h_delrport; + struct fc_bsg_host_els h_els; + struct fc_bsg_host_ct h_ct; + struct fc_bsg_host_vendor h_vendor; + + struct fc_bsg_rport_els r_els; + struct fc_bsg_rport_ct r_ct; + } rqst_data; +} __attribute__((packed)); + + +/* response (request sense data) structure of the sg_io_v4 */ +struct fc_bsg_reply { + /* + * The completion result. Result exists in two forms: + * if negative, it is an -Exxx system errno value. There will + * be no further reply information supplied. + * else, it's the 4-byte scsi error result, with driver, host, + * msg and status fields. The per-msgcode reply structure + * will contain valid data. + */ + uint32_t result; + + /* If there was reply_payload, how much was recevied ? */ + uint32_t reply_payload_rcv_len; + + union { + struct fc_bsg_host_vendor_reply vendor_reply; + + struct fc_bsg_ctels_reply ctels_reply; + } reply_data; +}; + + +#endif /* SCSI_BSG_FC_H */ + diff --git a/include/uapi/scsi/scsi_netlink.h b/include/uapi/scsi/scsi_netlink.h new file mode 100644 index 0000000..62b4eda --- /dev/null +++ b/include/uapi/scsi/scsi_netlink.h @@ -0,0 +1,123 @@ +/* + * SCSI Transport Netlink Interface + * Used for the posting of outbound SCSI transport events + * + * Copyright (C) 2006 James Smart, Emulex Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef SCSI_NETLINK_H +#define SCSI_NETLINK_H + +#include +#include + +/* + * This file intended to be included by both kernel and user space + */ + +/* Single Netlink Message type to send all SCSI Transport messages */ +#define SCSI_TRANSPORT_MSG NLMSG_MIN_TYPE + 1 + +/* SCSI Transport Broadcast Groups */ + /* leaving groups 0 and 1 unassigned */ +#define SCSI_NL_GRP_FC_EVENTS (1<<2) /* Group 2 */ +#define SCSI_NL_GRP_CNT 3 + + +/* SCSI_TRANSPORT_MSG event message header */ +struct scsi_nl_hdr { + uint8_t version; + uint8_t transport; + uint16_t magic; + uint16_t msgtype; + uint16_t msglen; +} __attribute__((aligned(sizeof(uint64_t)))); + +/* scsi_nl_hdr->version value */ +#define SCSI_NL_VERSION 1 + +/* scsi_nl_hdr->magic value */ +#define SCSI_NL_MAGIC 0xA1B2 + +/* scsi_nl_hdr->transport value */ +#define SCSI_NL_TRANSPORT 0 +#define SCSI_NL_TRANSPORT_FC 1 +#define SCSI_NL_MAX_TRANSPORTS 2 + +/* Transport-based scsi_nl_hdr->msgtype values are defined in each transport */ + +/* + * GENERIC SCSI scsi_nl_hdr->msgtype Values + */ + /* kernel -> user */ +#define SCSI_NL_SHOST_VENDOR 0x0001 + /* user -> kernel */ +/* SCSI_NL_SHOST_VENDOR msgtype is kernel->user and user->kernel */ + + +/* + * Message Structures : + */ + +/* macro to round up message lengths to 8byte boundary */ +#define SCSI_NL_MSGALIGN(len) (((len) + 7) & ~7) + + +/* + * SCSI HOST Vendor Unique messages : + * SCSI_NL_SHOST_VENDOR + * + * Note: The Vendor Unique message payload will begin directly after + * this structure, with the length of the payload per vmsg_datalen. + * + * Note: When specifying vendor_id, be sure to read the Vendor Type and ID + * formatting requirements specified below + */ +struct scsi_nl_host_vendor_msg { + struct scsi_nl_hdr snlh; /* must be 1st element ! */ + uint64_t vendor_id; + uint16_t host_no; + uint16_t vmsg_datalen; +} __attribute__((aligned(sizeof(uint64_t)))); + + +/* + * Vendor ID: + * If transports post vendor-unique events, they must pass a well-known + * 32-bit vendor identifier. This identifier consists of 8 bits indicating + * the "type" of identifier contained, and 24 bits of id data. + * + * Identifiers for each type: + * PCI : ID data is the 16 bit PCI Registered Vendor ID + */ +#define SCSI_NL_VID_TYPE_SHIFT 56 +#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT) +#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT) +#define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK) + + +#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen) \ + { \ + (hdr)->version = SCSI_NL_VERSION; \ + (hdr)->transport = t; \ + (hdr)->magic = SCSI_NL_MAGIC; \ + (hdr)->msgtype = mtype; \ + (hdr)->msglen = mlen; \ + } + +#endif /* SCSI_NETLINK_H */ + diff --git a/include/uapi/scsi/scsi_netlink_fc.h b/include/uapi/scsi/scsi_netlink_fc.h new file mode 100644 index 0000000..cbf76e4 --- /dev/null +++ b/include/uapi/scsi/scsi_netlink_fc.h @@ -0,0 +1,71 @@ +/* + * FC Transport Netlink Interface + * + * Copyright (C) 2006 James Smart, Emulex Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef SCSI_NETLINK_FC_H +#define SCSI_NETLINK_FC_H + +#include + +/* + * This file intended to be included by both kernel and user space + */ + +/* + * FC Transport Message Types + */ + /* kernel -> user */ +#define FC_NL_ASYNC_EVENT 0x0100 + /* user -> kernel */ +/* none */ + + +/* + * Message Structures : + */ + +/* macro to round up message lengths to 8byte boundary */ +#define FC_NL_MSGALIGN(len) (((len) + 7) & ~7) + + +/* + * FC Transport Broadcast Event Message : + * FC_NL_ASYNC_EVENT + * + * Note: if Vendor Unique message, &event_data will be start of + * vendor unique payload, and the length of the payload is + * per event_datalen + * + * Note: When specifying vendor_id, be sure to read the Vendor Type and ID + * formatting requirements specified in scsi_netlink.h + */ +struct fc_nl_event { + struct scsi_nl_hdr snlh; /* must be 1st element ! */ + uint64_t seconds; + uint64_t vendor_id; + uint16_t host_no; + uint16_t event_datalen; + uint32_t event_num; + uint32_t event_code; + uint32_t event_data; +} __attribute__((aligned(sizeof(uint64_t)))); + + +#endif /* SCSI_NETLINK_FC_H */ +