# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# $Id: Makefile.am,v 1.40 2008/09/08 13:39:17 karl Exp $
# Makefile.am for texinfo/doc.
# Run automake in .. to produce Makefile.in from this.
#
# This file is free software; as a special exception the author gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
DIST_COMMON = README $(info_TEXINFOS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/stamp-1 $(srcdir)/stamp-vti \
	$(srcdir)/version-stnd.texi $(srcdir)/version.texi texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/gnulib/m4/alloca.m4 \
	$(top_srcdir)/gnulib/m4/argz.m4 \
	$(top_srcdir)/gnulib/m4/codeset.m4 \
	$(top_srcdir)/gnulib/m4/eealloc.m4 \
	$(top_srcdir)/gnulib/m4/environ.m4 \
	$(top_srcdir)/gnulib/m4/error.m4 \
	$(top_srcdir)/gnulib/m4/exitfail.m4 \
	$(top_srcdir)/gnulib/m4/extensions.m4 \
	$(top_srcdir)/gnulib/m4/getopt.m4 \
	$(top_srcdir)/gnulib/m4/gettext.m4 \
	$(top_srcdir)/gnulib/m4/gettimeofday.m4 \
	$(top_srcdir)/gnulib/m4/glibc21.m4 \
	$(top_srcdir)/gnulib/m4/gnulib-common.m4 \
	$(top_srcdir)/gnulib/m4/gnulib-comp.m4 \
	$(top_srcdir)/gnulib/m4/iconv.m4 \
	$(top_srcdir)/gnulib/m4/include_next.m4 \
	$(top_srcdir)/gnulib/m4/inline.m4 \
	$(top_srcdir)/gnulib/m4/intlmacosx.m4 \
	$(top_srcdir)/gnulib/m4/lib-ld.m4 \
	$(top_srcdir)/gnulib/m4/lib-link.m4 \
	$(top_srcdir)/gnulib/m4/lib-prefix.m4 \
	$(top_srcdir)/gnulib/m4/localcharset.m4 \
	$(top_srcdir)/gnulib/m4/longlong.m4 \
	$(top_srcdir)/gnulib/m4/malloc.m4 \
	$(top_srcdir)/gnulib/m4/malloca.m4 \
	$(top_srcdir)/gnulib/m4/mbchar.m4 \
	$(top_srcdir)/gnulib/m4/mbiter.m4 \
	$(top_srcdir)/gnulib/m4/mbrtowc.m4 \
	$(top_srcdir)/gnulib/m4/mbscasecmp.m4 \
	$(top_srcdir)/gnulib/m4/mbschr.m4 \
	$(top_srcdir)/gnulib/m4/mbslen.m4 \
	$(top_srcdir)/gnulib/m4/mbsncasecmp.m4 \
	$(top_srcdir)/gnulib/m4/mbsstr.m4 \
	$(top_srcdir)/gnulib/m4/mbstate_t.m4 \
	$(top_srcdir)/gnulib/m4/mbswidth.m4 \
	$(top_srcdir)/gnulib/m4/memchr.m4 \
	$(top_srcdir)/gnulib/m4/memcmp.m4 \
	$(top_srcdir)/gnulib/m4/memcpy.m4 \
	$(top_srcdir)/gnulib/m4/memmem.m4 \
	$(top_srcdir)/gnulib/m4/memmove.m4 \
	$(top_srcdir)/gnulib/m4/mempcpy.m4 \
	$(top_srcdir)/gnulib/m4/mkstemp.m4 \
	$(top_srcdir)/gnulib/m4/nls.m4 \
	$(top_srcdir)/gnulib/m4/onceonly.m4 \
	$(top_srcdir)/gnulib/m4/po.m4 \
	$(top_srcdir)/gnulib/m4/progtest.m4 \
	$(top_srcdir)/gnulib/m4/setenv.m4 \
	$(top_srcdir)/gnulib/m4/stdbool.m4 \
	$(top_srcdir)/gnulib/m4/stdint.m4 \
	$(top_srcdir)/gnulib/m4/stdlib_h.m4 \
	$(top_srcdir)/gnulib/m4/stpcpy.m4 \
	$(top_srcdir)/gnulib/m4/strdup.m4 \
	$(top_srcdir)/gnulib/m4/strerror.m4 \
	$(top_srcdir)/gnulib/m4/string_h.m4 \
	$(top_srcdir)/gnulib/m4/strndup.m4 \
	$(top_srcdir)/gnulib/m4/strnlen.m4 \
	$(top_srcdir)/gnulib/m4/sys_stat_h.m4 \
	$(top_srcdir)/gnulib/m4/sys_time_h.m4 \
	$(top_srcdir)/gnulib/m4/tempname.m4 \
	$(top_srcdir)/gnulib/m4/unistd_h.m4 \
	$(top_srcdir)/gnulib/m4/wchar.m4 \
	$(top_srcdir)/gnulib/m4/wchar_t.m4 \
	$(top_srcdir)/gnulib/m4/wctype.m4 \
	$(top_srcdir)/gnulib/m4/wcwidth.m4 \
	$(top_srcdir)/gnulib/m4/wint_t.m4 \
	$(top_srcdir)/gnulib/m4/xalloc.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = texinfo info-stnd.info info.info
TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
DVIS = texinfo.dvi info-stnd.dvi info.dvi
PDFS = texinfo.pdf info-stnd.pdf info.pdf
PSS = texinfo.ps info-stnd.ps info.ps
HTMLS = texinfo.html info-stnd.html info.html
TEXINFOS = texinfo.txi info-stnd.texi info.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
	"$(DESTDIR)$(man5dir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
man1dir = $(mandir)/man1
man5dir = $(mandir)/man5
NROFF = nroff
MANS = $(man_MANS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
ALLOCA_H = @ALLOCA_H@
AMTAR = @AMTAR@
ARGZ_H = @ARGZ_H@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GETOPT_H = @GETOPT_H@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
GNULIB_CHOWN = @GNULIB_CHOWN@
GNULIB_DUP2 = @GNULIB_DUP2@
GNULIB_ENVIRON = @GNULIB_ENVIRON@
GNULIB_FCHDIR = @GNULIB_FCHDIR@
GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
GNULIB_GETCWD = @GNULIB_GETCWD@
GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
GNULIB_LCHOWN = @GNULIB_LCHOWN@
GNULIB_LSEEK = @GNULIB_LSEEK@
GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
GNULIB_MBSCHR = @GNULIB_MBSCHR@
GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
GNULIB_MBSLEN = @GNULIB_MBSLEN@
GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
GNULIB_MBSSEP = @GNULIB_MBSSEP@
GNULIB_MBSSPN = @GNULIB_MBSSPN@
GNULIB_MBSSTR = @GNULIB_MBSSTR@
GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
GNULIB_MEMMEM = @GNULIB_MEMMEM@
GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
GNULIB_PUTENV = @GNULIB_PUTENV@
GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
GNULIB_READLINK = @GNULIB_READLINK@
GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
GNULIB_RPMATCH = @GNULIB_RPMATCH@
GNULIB_SETENV = @GNULIB_SETENV@
GNULIB_SLEEP = @GNULIB_SLEEP@
GNULIB_STPCPY = @GNULIB_STPCPY@
GNULIB_STPNCPY = @GNULIB_STPNCPY@
GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
GNULIB_STRDUP = @GNULIB_STRDUP@
GNULIB_STRERROR = @GNULIB_STRERROR@
GNULIB_STRNDUP = @GNULIB_STRNDUP@
GNULIB_STRNLEN = @GNULIB_STRNLEN@
GNULIB_STRPBRK = @GNULIB_STRPBRK@
GNULIB_STRSEP = @GNULIB_STRSEP@
GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
GNULIB_STRSTR = @GNULIB_STRSTR@
GNULIB_STRTOD = @GNULIB_STRTOD@
GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
GNULIB_UNSETENV = @GNULIB_UNSETENV@
GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
GREP = @GREP@
HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
HAVE_DUP2 = @HAVE_DUP2@
HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
HAVE_LSTAT = @HAVE_LSTAT@
HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
HAVE_MEMPCPY = @HAVE_MEMPCPY@
HAVE_MKDTEMP = @HAVE_MKDTEMP@
HAVE_OS_H = @HAVE_OS_H@
HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
HAVE_READLINK = @HAVE_READLINK@
HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
HAVE_RPMATCH = @HAVE_RPMATCH@
HAVE_SETENV = @HAVE_SETENV@
HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
HAVE_SLEEP = @HAVE_SLEEP@
HAVE_STDINT_H = @HAVE_STDINT_H@
HAVE_STPCPY = @HAVE_STPCPY@
HAVE_STPNCPY = @HAVE_STPNCPY@
HAVE_STRCASESTR = @HAVE_STRCASESTR@
HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
HAVE_STRNDUP = @HAVE_STRNDUP@
HAVE_STRPBRK = @HAVE_STRPBRK@
HAVE_STRSEP = @HAVE_STRSEP@
HAVE_STRTOD = @HAVE_STRTOD@
HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
HAVE_UNISTD_H = @HAVE_UNISTD_H@
HAVE_UNSETENV = @HAVE_UNSETENV@
HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
HAVE_WCHAR_H = @HAVE_WCHAR_H@
HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
HAVE_WINT_T = @HAVE_WINT_T@
HAVE__BOOL = @HAVE__BOOL@
HELP2MAN = @HELP2MAN@
HEVEA = @HEVEA@
INCLUDE_NEXT = @INCLUDE_NEXT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LDFLAGS = @LDFLAGS@
LIBGNU_LIBDEPS = @LIBGNU_LIBDEPS@
LIBGNU_LTLIBDEPS = @LIBGNU_LTLIBDEPS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@

# Use the programs built in our distribution, taking account of possible
# cross-compiling.
MAKEINFO = $(top_builddir)/$(native_tools)/makeinfo/makeinfo
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
NEXT_STDINT_H = @NEXT_STDINT_H@
NEXT_STDLIB_H = @NEXT_STDLIB_H@
NEXT_STRING_H = @NEXT_STRING_H@
NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
NEXT_UNISTD_H = @NEXT_UNISTD_H@
NEXT_WCHAR_H = @NEXT_WCHAR_H@
NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
RANLIB = @RANLIB@
REPLACE_CHOWN = @REPLACE_CHOWN@
REPLACE_FCHDIR = @REPLACE_FCHDIR@
REPLACE_GETCWD = @REPLACE_GETCWD@
REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
REPLACE_LCHOWN = @REPLACE_LCHOWN@
REPLACE_LSEEK = @REPLACE_LSEEK@
REPLACE_MEMMEM = @REPLACE_MEMMEM@
REPLACE_MKDIR = @REPLACE_MKDIR@
REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
REPLACE_PUTENV = @REPLACE_PUTENV@
REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
REPLACE_STRERROR = @REPLACE_STRERROR@
REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
REPLACE_STRSTR = @REPLACE_STRSTR@
REPLACE_STRTOD = @REPLACE_STRTOD@
REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
STDBOOL_H = @STDBOOL_H@
STDINT_H = @STDINT_H@
STRIP = @STRIP@
SYS_STAT_H = @SYS_STAT_H@
SYS_TIME_H = @SYS_TIME_H@
TERMLIBS = @TERMLIBS@
TEX = @TEX@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
VOID_UNSETENV = @VOID_UNSETENV@
WCHAR_H = @WCHAR_H@
WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
WCTYPE_H = @WCTYPE_H@
WINT_T_SUFFIX = @WINT_T_SUFFIX@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gl_LIBOBJS = @gl_LIBOBJS@
gl_LTLIBOBJS = @gl_LTLIBOBJS@
gltests_LIBOBJS = @gltests_LIBOBJS@
gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
native_tools = @native_tools@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# Put texinfo.txi first because that's the most important.
info_TEXINFOS = texinfo.txi info-stnd.texi info.texi
DISTCLEANFILES = texinfo texinfo-* info*.info*
man_MANS = info.1 infokey.1 install-info.1 makeinfo.1 texindex.1 \
	info.5 texinfo.5 texi2dvi.1 texi2pdf.1 pdftexi2dvi.1

# We'd also like to use something like this, but Automake calls
# "install-info" directly.
# INSTALL_INFO = $(top_builddir)/$(native_tools)/util/ginstall-info
TXI_XLATE = txi-cs.tex txi-de.tex txi-en.tex txi-es.tex txi-fr.tex \
	    txi-it.tex txi-nl.tex txi-nb.tex txi-pl.tex txi-pt.tex \
	    txi-ru.tex txi-sr.tex txi-tr.tex txi-uk.tex

refcard_files = refcard/Makefile refcard/txicmdcheck \
                refcard/txirefcard-a4.pdf refcard/txirefcard.pdf \
		refcard/txirefcard.tex


# Include our texinfo.tex, not Automake's.
EXTRA_DIST = epsf.tex texinfo.tex \
             fdl.texi \
	     $(man_MANS) $(TXI_XLATE)

texmf_texinfo = $(TEXMF)/tex/texinfo
texmf_dvips = $(TEXMF)/tex/generic/epsf

# The man pages depend on the --help strings and the version number.
common_mandeps = $(top_srcdir)/configure.ac

# Set up the variables:
man_rule_0 = \
	program=`expr '/$@' : '.*/\(.*\)\.1'` && \
	case $$program in makeinfo) dir=makeinfo;; info*) dir=info;; \
	        *install-info) dir=install-info;; *) dir=util;; esac && \
	dir="$(top_builddir)/$(native_tools)/$$dir" && \
	case $$program in info|install-info) program=g$$program;; \
		esac


# Update the manpage for a binary program; set up the variables,
# make sure the binary is up-to-date and then generate the man page.
man_rule_bin = echo "Updating man page $@" && \
	$(man_rule_0) && \
	echo cd "$$dir" '&&' $(MAKE) $(AM_MAKEFLAGS) $$program$(EXEEXT) && \
	    (cd "$$dir"  &&  $(MAKE) $(AM_MAKEFLAGS) $$program$(EXEEXT)) && \
	echo $(HELP2MAN) --name=\""$$name"\" "$$dir/$$program" -o '$@' && \
	     $(HELP2MAN) --name="$$name"     "$$dir/$$program" -o '$@'

util_srcdir = $(top_srcdir)/util

# Do not depend on the current user's settings.
# We need to include util_srcdir in PATH so texi2pdf can find texi2dvi.
change_envvars = unset TEXI2DVI_BUILD_MODE; unset TEXI2DVI_BUILD_DIRECTORY; \
  PATH="$(util_srcdir):$${PATH}"; export PATH

common_texi2dvi_deps = $(common_mandeps) \
                       $(util_srcdir)/texi2dvi $(util_srcdir)/texi2pdf

all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

texinfo: texinfo.txi $(srcdir)/version.texi
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

texinfo.dvi: texinfo.txi $(srcdir)/version.texi 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi

texinfo.pdf: texinfo.txi $(srcdir)/version.texi 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi

texinfo.html: texinfo.txi $(srcdir)/version.texi 
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'texinfo.txi' || echo '$(srcdir)/'`texinfo.txi; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: texinfo.txi $(top_srcdir)/configure
	@(dir=.; test -f ./texinfo.txi || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/texinfo.txi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi"; \
	      cp vti.tmp $(srcdir)/version.texi)
	-@rm -f vti.tmp
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
@MAINTAINER_MODE_TRUE@	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi

info-stnd.info: info-stnd.texi $(srcdir)/version-stnd.texi
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

info-stnd.dvi: info-stnd.texi $(srcdir)/version-stnd.texi 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi

info-stnd.pdf: info-stnd.texi $(srcdir)/version-stnd.texi 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi

info-stnd.html: info-stnd.texi $(srcdir)/version-stnd.texi 
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'info-stnd.texi' || echo '$(srcdir)/'`info-stnd.texi; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/version-stnd.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-1
$(srcdir)/stamp-1: info-stnd.texi $(top_srcdir)/configure
	@(dir=.; test -f ./info-stnd.texi || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/info-stnd.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > 1.tmp
	@cmp -s 1.tmp $(srcdir)/version-stnd.texi \
	  || (echo "Updating $(srcdir)/version-stnd.texi"; \
	      cp 1.tmp $(srcdir)/version-stnd.texi)
	-@rm -f 1.tmp
	@cp $(srcdir)/version-stnd.texi $@

mostlyclean-1:
	-rm -f 1.tmp

maintainer-clean-1:
@MAINTAINER_MODE_TRUE@	-rm -f $(srcdir)/stamp-1 $(srcdir)/version-stnd.texi

info.info: info.texi $(info_TEXINFOS)
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'info.texi' || echo '$(srcdir)/'`info.texi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

info.dvi: info.texi $(info_TEXINFOS) 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'info.texi' || echo '$(srcdir)/'`info.texi

info.pdf: info.texi $(info_TEXINFOS) 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'info.texi' || echo '$(srcdir)/'`info.texi

info.html: info.texi $(info_TEXINFOS) 
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'info.texi' || echo '$(srcdir)/'`info.texi; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && \
	    (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

mostlyclean-aminfo:
	-rm -rf texinfo.aux texinfo.cp texinfo.cps texinfo.fn texinfo.fns texinfo.ky \
	  texinfo.kys texinfo.log texinfo.op texinfo.pg texinfo.tmp \
	  texinfo.toc texinfo.tp texinfo.tps texinfo.vr texinfo.dvi \
	  texinfo.pdf texinfo.ps texinfo.html info-stnd.aux \
	  info-stnd.cp info-stnd.cps info-stnd.fn info-stnd.ky \
	  info-stnd.log info-stnd.pg info-stnd.pgs info-stnd.tmp \
	  info-stnd.toc info-stnd.tp info-stnd.tps info-stnd.vr \
	  info-stnd.dvi info-stnd.pdf info-stnd.ps info-stnd.html \
	  info.aux info.cp info.cps info.fn info.ky info.log info.pg \
	  info.pgs info.tmp info.toc info.tp info.tps info.vr info.dvi \
	  info.pdf info.ps info.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
	done
install-man5: $(man5_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    5*) ;; \
	    *) ext='5' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \
	done
uninstall-man5:
	@$(NORMAL_UNINSTALL)
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    5*) ;; \
	    *) ext='5' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man5dir)/$$inst"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS) $(MANS)
installdirs:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
@INSTALL_WARNINGS_FALSE@install-data-local:
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-data-local install-info-am install-man

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
	@list='$(DVIS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \
	done
install-exec-am:

install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(HTMLS)'; for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  if test -d "$$d$$p"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
	  else \
	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
	  fi; \
	done
install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1 install-man5

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
	@list='$(PDFS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
	done
install-ps: install-ps-am

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
	@list='$(PSS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(psdir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(psdir)/$$f"; \
	done
installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-1 \
	maintainer-clean-aminfo maintainer-clean-generic \
	maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-1 mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-pdf-am uninstall-ps-am

uninstall-man: uninstall-man1 uninstall-man5

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic dist-info \
	distclean distclean-generic distdir dvi dvi-am html html-am \
	info info-am install install-am install-data install-data-am \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man1 install-man5 \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-1 maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti mostlyclean \
	mostlyclean-1 mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-vti pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-man1 uninstall-man5 uninstall-pdf-am \
	uninstall-ps-am

	     $(refcard_files)

@INSTALL_WARNINGS_TRUE@install-data-local:
@INSTALL_WARNINGS_TRUE@	@echo
@INSTALL_WARNINGS_TRUE@	@echo "WARNING: If your texmf tree does not already contain"
@INSTALL_WARNINGS_TRUE@	@echo "         up-to-date versions, you must install"
@INSTALL_WARNINGS_TRUE@	@echo "             texinfo.tex and txi-??.tex manually,"
@INSTALL_WARNINGS_TRUE@	@echo "         perhaps in TEXMF/tex/texinfo/,"
@INSTALL_WARNINGS_TRUE@	@echo "         where TEXMF is a root of your TeX tree."
@INSTALL_WARNINGS_TRUE@	@echo "         See doc/README for some considerations."
@INSTALL_WARNINGS_TRUE@	@echo "         You can run make TEXMF=/your/texmf install-tex to do this."
@INSTALL_WARNINGS_TRUE@	@echo
@INSTALL_WARNINGS_TRUE@	@echo "         You may also need to install epsf.tex in"
@INSTALL_WARNINGS_TRUE@	@echo "         TEXMF/tex/generic/dvips, if your TeX"
@INSTALL_WARNINGS_TRUE@	@echo "         installation did not include it."
install-tex:
	test -n "$(TEXMF)" || (echo "TEXMF must be set." >&2; exit 1)
	$(mkinstalldirs) $(DESTDIR)$(texmf_texinfo) $(DESTDIR)$(texmf_dvips)
	$(INSTALL_DATA) $(srcdir)/texinfo.tex $(DESTDIR)$(texmf_texinfo)/texinfo.tex
	$(INSTALL_DATA) $(srcdir)/epsf.tex $(DESTDIR)$(texmf_dvips)/epsf.tex
	for f in $(TXI_XLATE); do \
	  $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(texmf_texinfo)/$$f; done

$(srcdir)/info.1: $(top_srcdir)/info/info.c $(common_mandeps)
	@name="read Info documents" && $(man_rule_bin)
$(srcdir)/infokey.1: $(top_srcdir)/info/infokey.c $(common_mandeps)
	@name="compile customizations for Info" && $(man_rule_bin)
$(srcdir)/install-info.1: $(top_srcdir)/install-info/install-info.c $(common_mandeps)
	@name="update info/dir entries" && $(man_rule_bin)

# Here we need some postprocessing:
$(srcdir)/makeinfo.1: $(top_srcdir)/makeinfo/makeinfo.c $(common_mandeps)
	@name="translate Texinfo documents" && $(man_rule_bin)
	mv $@ $@.tmp
	sed '/^\.IP$$/N;/\nAlso/s/I//;/\nThe/s/I//' $@.tmp >$@
	rm $@.tmp

$(srcdir)/texindex.1: $(util_srcdir)/texindex.c $(common_mandeps)
	@name="sort Texinfo index files" && $(man_rule_bin)

$(srcdir)/texi2dvi.1: $(common_texi2dvi_deps)
	$(change_envvars); $(HELP2MAN) --name="convert Texinfo documents to DVI" $(util_srcdir)/texi2dvi >$@

$(srcdir)/texi2pdf.1: $(common_texi2dvi_deps)
	$(change_envvars); $(HELP2MAN) --name="convert Texinfo documents to PDF" $(util_srcdir)/texi2pdf >$@

$(srcdir)/pdftexi2dvi.1:  $(common_texi2dvi_deps)
	$(change_envvars); $(HELP2MAN) --name="convert Texinfo documents to PDF" $(util_srcdir)/pdftexi2dvi >$@

# Do not create info files for distribution.
dist-info:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: