# changelog

author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.2.0-10
changelog:
  - Disable dependency tracking to speed up the build.
  - Drop reader.conf patch, it's not needed any more.
  - Rename update-reader-conf to update-reader.conf for consistency with Debian,
    and improve it a bit.


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.2.0-0.fdr.6
changelog:
  - Improve package summary.
  - Improvements based on suggestions from Ludovic Rousseau:
    - Don't install pcsc_demo but do include its source in -devel.
    - Sync reader.conf with current upstream CVS HEAD (better docs, less
      intrusive in USB-only setups where it's not needed).


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.2.0-0.fdr.0.2.rc3
changelog:
  - Update to 1.2.0-rc3.
  - Trivial init script improvements.
  - Enable %{_smp_mflags}.
  - Don't bother trying to enable SCF.


author: Mike A. Harris <mharris@redhat.com> 3.5.5-2
changelog:
  - Added "BuildRequires: pkgconfig" for (#193427)
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 3.5.4.1-1
changelog:
  - Updated libXpm to version 3.5.4.1 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.
  - Added "Requires: libX11-devel" to devel subpackage as xpm.h includes various
    X headers. (#174163)
  - Added missing build dep libXau-devel


author: Mike A. Harris <mharris@redhat.com> 3.5.4-1
changelog:
  - Updated libXpm to version 3.5.4 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Mike A. Harris <mharris@redhat.com> 3.5.2-4
changelog:
  - Although ./configure checks for libXt and libXext, and indicates
    that they are missing, it continues to build anyway, and just does not
    build sxpm if they are not present.  Therefore, libXt-devel and
    libXext-devel are required build deps in order to get sxpm built.
  - Added missing defattr to devel subpackage.


author: Mike A. Harris <mharris@redhat.com> 3.5.2-2
changelog:
  - Renamed package to prepend "xorg-x11" to the name for consistency with
    the rest of the X11R7 packages.
  - Added "Requires: %{name} = %{version}-%{release}" dependency to devel
    subpackage to ensure the devel package matches the installed shared libs.
  - Added missing sxpm binary to devel subpackage
  - Added virtual "Provides: lib<name>" and "Provides: lib<name>-devel" to
    allow applications to use implementation agnostic dependencies.
  - Added post/postun scripts which call ldconfig.
  - Added Conflicts with XFree86-libs and xorg-x11-libs to runtime package,
    and Conflicts with XFree86-devel and xorg-x11-devel to devel package.


author: Doug Ledford <dledford@redhat.com> - 1.0.3-2
changelog:
  - Make scriptlets match mvapich
  - Include a Requires(post) and Requires(preun) so installs work properly
  - Resolves: bz465448


author: Lukas Tinkl <ltinkl@redhat.com> - 6:3.5.4-22
changelog:
  - Resolves: #499442, Kdesktop_lock does not work on multiuser 
    systems and for single user with multiple login


author: Than Ngo <than@redhat.com> - 6:3.5.4-20
changelog:
  - Resolves: #469723, Cannot mount floppy disk
  - Resolves: #472295, KDE Desktop icons do not refresh correctly


author: Than Ngo <than@redhat.com> 6:3.5.4-19
changelog:
  - Resolves: #251414, knotification cannot be enabled after re-enabling arts from kcontrol
  - Resolves: #251968, kdesktop_lock issue
  - Resolves: #236931, kdm does not cleanup PAM state


author: Than Ngo <than@redhat.com> - 6:3.5.4-17
changelog:
  - Resolves: #222970, khelpcenter crashes if press F1 at least 2 consecutive times
  - Resolves: #380281, kcmshell desktop - default button on virtual
    desktop doesn't work


author: Than Ngo <than@redhat.com> 6:3.5.4-13.3.el5
changelog:
  - second login attempt by validated user bypasses login passwords (#201507), CVE-2006-3742
  - fix #211979, switchuser only available with KDM
  - fix kde#134816, XDG's NoDisplay flag is not processed correcrly
  - devices that are in fstab should show up no matter what HAL thinks
  - get rid of unneeded dependency on xorg-x11-xdm
  - fix Theme/Colors/ksplash for RHEL5


author: Than Ngo <than@redhat.com> 6:3.5.4-10
changelog:
  - FedoraDNA for KDM
  - fix #205566, don't overwrite config files
  - fix #178320,#198828, follow menu-spec


author: Than Ngo <than@redhat.com> 6:3.5.4-8
changelog:
  - apply upstream patch
     fix #205701, no bold is displayed in konsole
     fix two possible mem leaks
  - add missing icons for package_games_kids
  - add more icon contexts (Tango icontheme)


author: Than Ngo <than@redhat.com> 6:3.5.4-7
changelog:
  - apply upstream patch
     fix #53642, Menubar is always visible after coming back from fullscreen
     fix #133665, crash in kiosk mode


author: Than Ngo <than@redhat.com> 6:3.5.4-5
changelog:
  - add Requires: eject 
  - fix #203279, antialiasing issue
  - apply upstream patch to fix kdedesktop crash, kde#132873
  - fix #201507, pam config issue
  - fix kdm crash


author: Than Ngo <than@redhat.com> 6:3.5.4-1
changelog:
  - apply upstream patch to fix KDED crashing on startup when D-BUS is unavailable.
  - apply upstream patch to fix kde#128552, kicker regression


author: Petr Rockai <prockai@redhat.com> - 6:3.5.4-0.pre1
changelog:
  - prerelease of 3.5.4 (from the first-cut tag)
  - disable --enable-final on s390x in case it would cause problems


author: Than Ngo <than@redhat.com> 6:3.5.3-6
changelog:
  - apply patch to to fix #194659, CVE-2006-2449 KDM symlink attack vulnerability
    thanks to KDE security team


author: Than Ngo <than@redhat.com> 6:3.5.3-3
changelog:
  - move only *.so symlinks to -devel subpackage
  - enable --enable-new-ldflags again since ld bug fixed


author: Than Ngo <than@redhat.com> 6:3.5.3-1
changelog:
  - update to 3.5.3
  - drop --enable-new-ldflags, workaround for ld bug
  - update kioslave_media_dbus patch


author: Than Ngo <than@redhat.com> 6:3.5.2-11
changelog:
  - apply upstream patches to fix several bugs in konsole, and
    fix #192832, konsole crashes on kde logout


author: Than Ngo <than@redhat.com> 6:3.5.2-10
changelog:
  - fix #191049, KDE screensaver calls PAM incorrectly
  - fix 191306, Kde Help Center can't build an index


author: Than Ngo <than@redhat.com> 6:3.5.2-8
changelog:
  - fix 190836, xmTextFieldClass widgets don't work properly
  - fix 153202, startkde gets wrong field from space_tmp/space_home with finnish


author: Than Ngo <than@redhat.com> 6:3.5.2-1
changelog:
  - update to 3.5.2
  - update dbus patch
  - drop kdebase-3.5.1-kwin-systray.patch, kdebase-3.5.1-keyboardlayout.patch,
    included in new upstream


author: Than Ngo <than@redhat.com> 6:3.5.1-3
changelog:
  - kscreensaver/kdm/kcheckpass use a separate PAM config file #66902
  - cleanup kdm config file #166388 
  - apply patch to launch kde scripts in shutdown,env directories #178326
  - kdm.log logrotate-enabled #178328
  - add konqueror webshortcuts for fedora project #178366
  - don't include unnecessary README #169331


author: Than Ngo <than@redhat.com> 6:3.5.1-1
changelog:
  - 3.5.1
  - apply patch to fix kded segfaults for audio/blank cd's
  - get rid some of unneeded patches
  - add buildrequires on libxkbfile-devel


author: Than Ngo <than@redhat.com> 6:3.5.0-2
changelog:
  - add dbus support
  - backport kde-mount from coolo kde-branch for working with new dbus/hal
  - update KDE default setting
  - update desktop-database/GTK+ icon cache


author: Than Ngo <than@redhat.com> 6:3.4.2-4
changelog:
  - apply patch to fix local root vulnerability in kcheckpass CAN-2005-2494, #166997
  - apply upstream patch to fix kinfocenter opengl DRI/GLX crash


author: Than Ngo <than@redhat.com> 6:3.4.0-6
changelog:
  - apply kdebase-3.4.0rc1-konsole-keymap.patch to change backspace key
    to ASCII-DEL, thanks to j.w.r.degoede@hhs.nl


author: Than Ngo <than@redhat.com> 6:3.4.0-4
changelog:
  - update kdebase-3.4.0rc1-konsole-keymap.patch
  - add Bluecurve theme for kdm
  - enable show device icons as default


author: Than Ngo <than@redhat.com> 6:3.3.2-0.2
changelog:
  - apply the patch to fix Konqueror Window Injection Vulnerability #142510
    CAN-2004-1158,  Thanks to KDE security team


author: Than Ngo <than@redhat.com> 6:3.3.2-0.1
changelog:
  - update to 3.3.2
  - remove unneeded kdebase-3.3.1-cvs.patch, kdebase-3.3.1-sidebar.patch
  - add CVS patch, that fixes a konsole crash


author: Than Ngo <than@redhat.com> 6:3.3.1-6
changelog:
  - remove unneeded require on lm_sensors #137649
  - enable devices-symbol
  - get rid of unneeded device desktop files


author: Than Ngo <than@redhat.com> 6:3.3.0-2
changelog:
  - Own mozilla plugin dir, bug #131667
  - Fix hangup in kicker when user clears clipboard history fom klipper
  - Fix df problem on AFS again


author: Than Ngo <than@redhat.com> 3.2.1-1.5
changelog:
  - fix typo bug
  - add missing Catagories in konsole, #118864
  - add missing requires on kdelibs-devel, bug #118605


author: Than Ngo <than@redhat.com> 3.2.0-1.9
changelog:
  - don't rename to the contents of the translated Name field
  - create desktop files if Desktop directory is empty


author: Than Ngo <than@redhat.com> 6:3.1.94-0.2
changelog:
  - KDE 3.2 Beta 2 respin
  - adjusted aboutkde.patch for 3.2
  - remove kdebase-3.1.93-menu.patch, it's in upstream


author: Than Ngo <than@redhat.com> 6:3.1.93-0.3
changelog:
  - disable kpersonalizer
  - fix konsole desktop file
  - get rid of some old workarounds in startkde, speedup startkde
  - get rid of theme, it's obsolete in 3.2
  - add missing starthere icon
  - add missing kde-unknown.directory


author: Than Ngo <than@redhat.com> 6:3.1.93-0.1
changelog:
  - KDE 3.2 Beta 1
  - remove many patch files, which are now in upstream
  - cleanup many patch files
  - cleanup startkde
  - cleanup rpm file list


author: Than Ngo <than@redhat.com> 6:3.1.4-4
changelog:
  - add patch to allow different icon size in kicker menu
  - don't reset icon size to 20x20 if it's greater than 20


author: Than Ngo <than@redhat.com> 6:3.1.4-2
changelog:
  - install kde.desktop in /usr/share/xsession
  - add more translations for kde.desktop (stolen from kde 3.2 cvs)


author: Than Ngo <than@redhat.com> 6:3.1.2-6
changelog:
  - fix to build nsplugins with openmotif
  - add buildrequires openmotif-devel instead lesstif-devel
  - vfolder-0.1.2


author: Elliot Lee <sopwith@redhat.com> 6:3.1.1-7
changelog:
  - Unconditionally extract vfolder archive, to allow for patching
  - Patch vfolder/admin/cvs.sh to deal with new 'head' options.
  - Patch vfolder/xmlcheck/main.cpp to fix typo


author: Than Ngo <than@redhat.com> 6:3.1.1-1
changelog:
  - 3.1.1 release
  - get rid of some patch files, which are now in new upstream
  - adjust some patch files for 3.1.1
  - permission fix
  - get rid of unneeded pam config file of kscreensaver
  - move desktop-create-menu to kdelibs


author: Than Ngo <than@redhat.com> 6:3.1-9
changelog:
  - set default start page to red hat welcome page (#84858)
  - add fix for KDE Random Screensaver (#83671)


author: Than Ngo <than@redhat.com> 6:3.1-5
changelog:
  - fix scanpath mozilla plugin, #83618
  - add a patch file from Leon Ho llch@redhat.com,  #82529
  - add some missing KDE screensavers, bug #83671


author: Than Ngo <than@redhat.com> 6:3.1-4
changelog:
  - rhn-applet/pam-panel-icon/eggcups applet start correct now, #83264
  - set NFSPollInterval=5000, PollInterval=500


author: Nalin Dahyabhai <nalin@redhat.com> 3.1-0.12
changelog:
  - add openssl-devel as a buildreq
  - add pkgconfig as a buildreq
  - if pkgconfig admits to knowing about openssl, incorporate its information


author: Than Ngo <than@redhat.com> 3.1-0.6
changelog:
  - clean up KDE menu/kcontrol center menu
  - fix build problem on s390/s390x
  - eggcups to kdebase default session (Tim Waugh)
  - rpm macros (Mike Harris)


author: Nalin Dahyabhai <nalin@redhat.com> 3.0.5-3
changelog:
  - remove directory names from PAM configuration files so that they can be
    used for all arches on multilib boxes


author: Than Ngo <than@redhat.com> 3.0.4-2.2
changelog:
  - konsole super user mode shouldn't require password to be retyped (bug #77387)
  - unpackged files in buildroot


author: Than Ngo <than@redhat.com> 3.0.4-1
changelog:
  - cleanup some patch file for 3.0.4
  - cleanup configure to build correct on x86_64
  - Added /etc/X11/applnk in WatchDir
  - KDE screensaver issue (bug #73412)
  - better handling of desktop file renames (bug #74071)
  - Konsole screen refresh is slow (bug #73303, #75154)
  - localiztion fix (bug #75085, #75012)
  - Unable to acess the preferences of KNewsTicker (bug #74805)


author: Than Ngo <than@redhat.com> 3.0.3-10
changelog:
  - Fixed kdm to read X resource if it's deleted.
  - Set Bluecurve theme in kdm as default
  - Add share/applnk in WatchDir
  - remove merging share/applnk
  - Ajust Colors scheme


author: Than Ngo <than@redhat.com> 3.0.3-9
changelog:
  - turn on  AntiAliasing in KDM as default (bug #68872)
  - fixed KDM using Fonts Sans
  - put Red Hat in the version number
  - disable Report Bug menu item
  - turn off stick button in window title
  - added katefiledialogencoding patch from Leon Ho (bug #68214)


author: Than Ngo <than@redhat.com> 3.0.3-8
changelog:
  - Fixed kicker not showing buttons if desktop file not found (bug #71141)
  - Fixed clock patch to prefer redhat-config-date
  - klippper only showed in KDE
  - Add icon order patch from Phil Knirsch


author: Than Ngo <than@redhat.com> 3.0.3-7
changelog:
  - Added Bluecurve theme for kthememanager
  - Fixed a bug in KDE default theme (bug #71413)
  - Added missing KDE settings
  - Added keymap patch and clock patch from Preston
  - Adjusted clock patch


author: Than Ngo <than@redhat.com> 3.0.3-5
changelog:
  - Add fix to resize panel icons (bug #72549)
  - Add fix to lauch kdm login manager module from kcontrol (bug #72470)
  - remove OnlyShowIn KDE in konqueror (bug #72408)
  - Get rid of kpersonalizer from startkde, now KDE supports LANG (bug #72251)
  - Fix vfolder bug (bug #71919)
  - Set Sans 10 as default font
  - Set help_about_kde to false as default
  - Rename konsole to Terminal
  - Add fix to reload global X resource if it's deleted


author: Preston Brown <pbrown@redhat.com> 3.0.3-4
changelog:
  - Default mouse focus should be click to focus (#71816)
  - move all "Preferences->System" items to Extras
  - move kdm configuration to Extras
  - remove "Date & Time" (duplicate functionality) from menus (#59695)
  - remove kcmfontinst (incompatible functionality) from menus (#59695)
  - Kate into Accessories category (from Programming)
  - fix Configure... menu entry in RMB menu of kwin
  - default wallpaper mode is Scaled not Centered


author: Than Ngo <than@redhat.com> 3.0.3-3
changelog:
  - Some Tweaks in configuration
  - lauch rhn-applet-gui instead applet-gui
  - Fixed kpersonalizer using Bluecurve instead Wonderland


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.3-2
changelog:
  - Some fixes in the vfolder ioslave
  - Support <Not> queries in the vfolder ioslave
  - Add Start Here icon on desktop


author: Than Ngo <than@redhat.com> 3.0.3-1
changelog:
  - 3.0.3
  - Added some rh default settings in kicker/kwin
  - Fixed a bug in kicker to start menueditor (bug #71164)
  - Fixed a bug in setting clock/date
  - Added fix to start rhn-applet and pam-panel-icon in systemtray
  - Configuration tweaks (bug #70926)
  - Added fix to use Bluecurve
  - Added new desktop-create-kmenu
  - Added a systemtray patch from Harald Hoyer


author: Than Ngo <than@redhat.com> 3.0.2-8
changelog:
  - Implemented slotRhDescription in kpersonalizer (bug #70863)
  - Added more BuildPrereq (bug #69992, #70011)
  - Wonderland icon Theme as default (bug #69654)
  - Added fix for looking desktop file with prefix kde
  - Fixed a bug Konsole configure (bug #67217)
  - don't use prefix kde by some typical KDE appllications
  - use -O0 on alpha machine (compiler bug)


author: Than Ngo <than@redhat.com> 3.0.2-7.2
changelog:
  - add patch file to fix kicker segfault (bug #69688)
  - get rid of Taiwanese Flag in KDE (bug #70235)


author: Than Ngo <than@redhat.com> 3.0.2-7.1
changelog:
  - don't merge old kde menus (#69652)
  - add fix to show evolution/mozilla in kicker (#69725, #70152, #70618, #69822)
  - add fix to have rh panel layout (#59676)
  - add some fixes from 3.0.2 stable branch
  - add a patch file to fix a bug in startkde, Karsten Hopp
  - add requires images for ksplash
  - add pam_timestamp support (#69863)
  - add fix to make kpersonalizer usable in 640x480 resolution (#68358)
  - add fix for looking DesktopEntryName with prefix kde


author: Than Ngo <than@redhat.com> 3.0.2-5
changelog:
  - Fixed a bug by writing widgetStyle in confile
  - default.jpg as default background, if no background image is found
    use plain color #5477A0
  - BusyCursor=false as default for rh Style
  - use klipper applet rather than tray icon (bug #67107)
  - add rh panel layout
  - build against gcc 3.2-0.1


author: Than Ngo <than@redhat.com> 3.0.2-4
changelog:
  - merge /var/lib/menu/kde/Applications
  - Added missing index file for Crystal icons
  - Own /usr/share/icons/Crystal, /usr/share/mimelnk/print
  - Fixed kwin issue in kpersonalizer
  - Added a missing patch file
  - Fixed KDE menu issue (bug #69102, #67648)
  - Fixed Control Center issue (bug #69031) 
  - Tiny tweaks to kdebase .desktop files (bug #69002)
  - Added some hacks for KDE screen savers


author: Than Ngo <than@redhat.com> 3.0.2-3
changelog:
  - Added patch in konqueror, it should search pluggins on mozilla directory (bug #68599)
  - Fixed a bug in merging /etc/X11/applnk (bug #64919,64594)
  - Added patch for merging /var/lib/menu/kde
  - Fixed a bug in kcontrol, it should search screensavers in /var/lib/menu/kde
  - Added desktop-create-kmenu
  - Added fix for building against g++-296 (bug #68752)
  - Added fix in KDE font installer using xfs reload (bug #64664) (rdieter@math.unl.edu)
  - Fixed refresh issue in konsole (Harald Hoyer)
  - Fixed font issue in konsole (bug #68476)
  - Fixed font issue in terminal emulation under Konqueror (bug #68618)
  - correct fonts in KDE startup (bug #68872)
  - Redhat Style Kwin has opaque resize as default (bug #68401)
  - AntiAliasing on as default in Redhat Style Wonderland
  - Added missing screensave desktop files
  - Rename the section in screen save desktop files
  - Don't strip binaries
  - get rid of wallpapers, requires desktop-backgrounds-basic,
    wallpapers are now in desktop-backgrounds-basic
  - Fixed colorScheme issue in kpersonalizer
  - Added floppy unit icon missing on desktop (bug #68890)
  - Adapted kdebase to new desktop background framework (bug #66784)
  - 3.0.2 fixed bug #63700


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Change defaults
  - Add the vfolder ioslave
  - Add hacks to launch desktop-create-kmenu when needed, merge /etc/kde/menu


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-9
changelog:
  - Try to fix bug #60811 (kpersonalizer now sets default fonts for CJK)
  - Put kicker configuration back in kpersonalizer (#61266) and make sure the
    minimal variant is selected for extremely low resolutions (#63266)


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-7
changelog:
  - Fix default kicker config - it shouldn't point to absolute paths (#62355)
  - Add build requirement on samba >= 2.2.3a-5 to build the correct smb
    ioslave (#62202)


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-5
changelog:
  - Add fixes from KDE_3_0_BRANCH, except for the "F1 in konsole" change
    (that one breaks things)
  - Don't show Taiwanese flag for zh_CN (#61946)
  - Move in Red Hat splash screen


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-4
changelog:
  - Fix issues with multiple instances of kbookmarkeditor being opened
    at the same time
  - Remove the static cdparanoia hack, we're shipping shared cdparanoia
    libs these days.


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-3
changelog:
  - Merge patches from KDE_3_0_BRANCH:
    - Fix konsole crash
    - Fix Comment vs. GenericName issue in kcm_kdm
    - Fix memory leak in kcontrol


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-0.cvs20020314.1
changelog:
  - Add patch from Than to scale down icons for submenus pointing to legacy
    applications rather than keeping them at 32x32


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010805.1
changelog:
  - Fix anti-aliased fonts
  - Remove Japanese konsole patch, it breaks changing fonts in all other
    languages
  - BuildRequire lesstif-devel to make sure recompiled versions of Konqueror
    support Netscape plugins
  - Remove language detection hacks from startkde, they're now in kpersonalizer
  - Personalize kicker in kpersonalizer
  - Power off when halting the system in kdm (#50847)


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010731.1
changelog:
  - Remove some patches that made it into cvs
  - Fix up the Japanese patch, it messed up konsole fonts on "normal"
    languages


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010721.1
changelog:
  - rebuild - somehow an application got linked against an older version of
    itself from the buildroot
  - update


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010720.1
changelog:
  - update
  - get rid of some rpmlint warnings
  - remove kappfinder (we maintain /etc/X11/applnk)
  - work around ia64 breakage


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.alpha2.2
changelog:
  - Work around NFS-mounted home directories residing on servers with
    ultimately broken OSes (#40711)
  - Fix desktopconv compilation without optimizations (#40144)
  - Move old config files rather than deleting them (#38107)
  - Add explicit requirements on lm_sensors and kdelibs-sound (#32678)
  - Fix doc generation (#40087)
  - s/Copyright:/License:/


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010513.1
changelog:
  - Fix up default settings; KSpell should use Aspell right away
  - Split out -devel subpackage; with KWin and Kate moving to plugin systems,
    this is getting big...


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010512.1
changelog:
  - Update, adapt patches
  - Fix up desktop devices patch, we want the "Eject" action for CD-ROMs,
    CD-Writers, CD-RWs, ZIP and JAZ-Drives and LS120.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix deadkeys handling in kdm
  - Fix uninitialized variable in konsole, patch
    from Tim Waugh (#34452)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix rpmfind shortcut (Bugzilla #34057, KDE Bug #21100)
  - Add patch from KDE_2_1_BRANCH to get rid of debug output in
    the ktar IO slave


author: Than Ngo <than@redhat.com>
changelog:
  - fix charmap/encoding problem
  - fix MinimumFontSize in konqueror, default is 10
  - set correct DefaultEncoding for konqueror
  - clean up startkde
  - disable Israel and Thai, it's broken in qt


author: Preston Brown <pbrown@redhat.com>
changelog:
  - remove CD-ROM / Floppy .desktop files, they are generated automatically now
  - remove some other old obsolete default config files


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1.1-2
changelog:
  - Log utmp/wtmp correctly in konsole, using utempter
  - Remove setuid state from konsole_grantpty, it's no longer needed now
    that we use utempter.
  - Fix escaping in the konsole KPart
  - Fix grammar and order in the arts control module


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1.1-1
changelog:
  - 2.1.1
  - Don't crash if kfmexec is invoked without arguments (#32029)
  - Various desktopconv fixes:
    - Allow removing or ignoring KDE 1.x files
    - convert the printer icon we had on the desktop by default.
    - Support i18n
  - Add mailsettings tool (generates sane kcmemail defaults at first
    startup)
  - Fix up support for Brazil Portuguese and Chinese
  - Fix loading of child panel config files (harald)
  - remove -T and --title in konsole, use instead --caption (#31483) (Than Ngo)
  - More i18n fixes (zh_HK is closer to zh_TW than to zh_CN...)


author: Than Ngo <than@redhat.com>
changelog:
  - fix Login Screen Red Hat logo (Bug #32241)
  - fix kdm background color
  - fix a bug in setting font size (Bug #32258)


author: Than Ngo <than@redhat.com> 2.1-11
changelog:
  - fix placed icons on desktop (Bug #31985)
  - some bugfixes in startkde
  - restore support for Russian (bero)
  - merge bugfix patch from KDE_2_1_BRANCH, Ctrl-U could crash Konqueror
    under certain circumstances (bero)
  - Fix up the effects patch (if everything was disabled, no radio button
    was checked by default, rather than the "No effects" button) (bero)


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1-10
changelog:
  - Fix up i18n support
  - Don't use predictable tmp file names in krdb
  - Remove the printer icon from the desktop. It uses klpq which is in kdeutils,
    so the icon should come from there.
  - fix error.c in kdebase-2.1-fixes.patch, It's broken (Than Ngo)
  - better fix for konsole keyboard mappings (Preston Brown)


author: Than Ngo <than@redhat.com>
changelog:
  - fix default profile for konqueror in webbrowser mode 
  - set lucidatypewriter as fixed-width font for konqueror


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1-9
changelog:
  - Fix locale settings (old versions didn't check the user's locale settings
    and always started up in English)
  - Fix some braindead code in kwrite


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1-8
changelog:
  - Add option to save backtraces to a file (#30867)
  - Fix kdm looking horrible on 8 bit displays
  - Revert to /usr/share/config with an exception for kdmrc
  - Add /etc/skel/Desktop/.directory (the /etc/skel/Desktop/* glob doesn't include
    /etc/skel/Desktop/.* ...)
  - Don't apply konsole-noxft patch anymore (workaround for an X bug
    that was fixed in 11.4)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - /usr/share/config -> /etc/kde
  - Don't throw all config files at every user's home directory; 2.x supports
    changing global defaults
  - Get rid of bogus "can't find schema named" warning
  - Fix various bugs in konsole (don't connect to a NULL slot, etc.)
  - Cripple kxmlrpcd by default (#23253)
  - Add a sane icon arrangement at first startup (#25026)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add fixes from KDE_2_1_BRANCH:
    - Fix up cookie handling in konqueror
    - Fix a potential crash in kcontrol when using config files from
      cvs snapshots
    - Fix possible khotkeys segfault
  - Fix up Konqueror User Agent dialog
  - Log in to "default" session by default (#29157)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix up konsole_grantpty to work with the /dev/pts filesystem and
    /dev/ptmx rather than the old /dev/ptyXX system
  - Replace ktip logo with Red Hat logo, the old one could be considered
    offensive by some people
  - Fix build with glibc 2.2.2
  - Turn off icon view in kdm
  - Other minor changes to default config


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - desktopconv: Don't strip off .png/.xpm/.gif in Icon= if it is
    provided as a full pathname
  - Build with --disable-debug
  - Fix a bug causing all icons to appear in the upper-left corner
  - Don't use antialiased fonts in konsole even if they're turned on.
    Konsole can't deal with them.
  - Don't show the postgres and amanda users in kdm
  - Add rhbug/bz shortcut to Bugzilla
  - Add ftpsearch/fs shortcut to FTP Search
  - Add "Eject" option to CD-ROM icon (RFE #26301)
  - Fix permissions on some files in /etc/skel/Desktop (having them readable
    by root only is not really useful ;) )
  - Fix PAM exiting (#25232, Patch from Tim Waugh)
  - Fix utmp handling in konsole (Bug #25048)
  - Rewrite desktopconv and run it from startkde, ensures
    clean updates from KDE 1.x (Bug #25473)
  - Add $HOME/bin to PATH in kdm (Bug #25743)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Link the greeter into kdm statically, pulling in libpthreads
    Fixes crash with glibc-2.2.1-3 i686


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Turn off anti-aliasing by default
  - Restore the turning AA on/off and "apply styles to non-KDE-apps"
    functionality, someone managed to break them just in time for
    2.1 beta 2.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Kill /usr/share/icons/hicolor/22x22/actions/view_tree.png, it's in
    kdelibs
  - restore missing /etc/kderc (Bug #24601)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update CVS (fixed #24298, #24242)
  - Hack in support for turning anti-aliasing on and off, as requested
    by Than. Unfortunately, this patch probably won't go into the base 2.1
    because of the message freeze.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - kdm shouldn't show gdm and mailnull users (#23136)
  - don't install the konsole fonts, they're now
    included in XFree86 (#23467)
  - Obsoletes kdebase2 (from 7.0-preview)
  - Add config files (used to be in kdesupport) (#22601)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update
  - Obsolete kdebase-3d-screensavers, kdebase-locolor-icons,
    kapm kcmlaptop (optional stuff from KDE 1.x)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Some fixes to startkde:
    - if /etc/skel/.kde doesn't exist, don't copy it
    - remove stale .DCOPserver* files at startup
  - Rebuild with fixed kdoc


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Move include files to /usr/include/kde
  - Don't install any of the mini-lesstif files, we need them at
    build time only
  - Fix consolehelper config for kappfinder


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to KDE_2_0_BRANCH, now that the ".0 release" bugs are fixed
  - Get rid of the Red Hat menu, it's merged now
  - Fix up the gdm session file
  - Fix up kappfinder, run it through consolehelper (Bug #19903)
  - Enable Netscape plugin support, add a stripped down version of lesstif
    to allow this


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - get rid of the 3d-screensavers package - now that qt-GL is part of qt,
    there's no need to keep them separate to avoid the dependency.


author: Than Ngo <than@redhat.com>
changelog:
  - fix gnome-session so that KDE2 can be started from gdm
  - pam/kde2 instead pam/kde to avoid problem with KDE1
  - don't requires qt-GL, It's now in qt


author: Than Ngo <than@redhat.com>
changelog:
  - fix dependency problem with KDE1 so that KDE1 and KDE2 can be installed
    at the same time
  - add missing ldconfig in %post anf %postun
  - fix for reading config files in /etc/X11/xdm, add Xsession to requires


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - rebuild, now that kdelibs2 works on alpha
  - use the same ugly hack to get kdebase to compile
  - remove ksysguard on alpha (even more compiler problems)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - new snapshot
  - ExcludeArch ia64 for now
  - remove gnome .desktop file, we get it from gnome-core now.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Build the OpenGL screensavers, and move them to a separate package
  - Improve the spec file (BuildPrereqs etc.)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - start autorun if present in startkde
  - check for configured soundcard before running sound services


author: Preston Brown <pbrown@redhat.com>
changelog:
  - added link to /etc/X11/applnk, .directory file
  - included lowcolor icon sub-package
  - enable .desktop file access


author: Preston Brown <pbrown@redhat.com>
changelog:
  - customized startkde script to set up user environment if not present.
  - mention kthememgr in description.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - snapshot, includes kde 1.1.1 + fixes
  - kvt removed for security reasons.  It is a steaming pile of...


author: Preston Brown <pbrown@redhat.com>
changelog:
  - today's snapshot makes kfm a bit nicer and some other fixes
  - moved default rc files to kdesupport


author: Preston Brown <pbrown@redhat.com>
changelog:
  - removed bell.xpm (used to be in fvwm2-icons, don't want installer to see
  - this previous connection and autoselect kdebase for upgrade).


author: Jan Iven <jan.iven@cern.ch> 1-6.slc5
changelog:
  - split out for SLC5
     - no more Kerberos4 in "kinit" (MIT branch - just AFS)
     - remove "klog" and "tokens" wrappers - use OpenAFS version in standard path
     - add "pagsh.openafs" to "pagsh" wrapper
     - remove "klist" and "kdestroy" - MIT version should be in user path.


author: Jan Iven <jan.iven@cern.ch> 1-6.scl4
changelog:
  - prefer aklog over afs5log since it generates no bogus requests on the server
  - prepare to re-route kpasswd to central password page


author: Jan Iven <jan.iven@cern.ch> 1.2
changelog:
  - unified version for SLC3/4 again
  - pam_krb5-2.2.8 is required (for afs5log)
  - slightly stronger warning on the "klog" wrapper


author: Jan Iven <jan.iven@cern.ch> 0.8
changelog:
  - update wrappers to use either Heimdal (preferred) or MIT
  - get AFS+Krb4 even with MIT kinit
  - remove "Kerberos4 or Kerberos5" logic from kpasswd


author: Jan Iven <jan.iven@cern.ch>
changelog:
  - change kpasswd to use the AFS version for now, trigger 
    on /afs/cern.ch/project/connectivity/KERBEROS-VERSION for the upgrade
  - add passwd (from 7.3 SUE, changed perl path)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.0-2
changelog:
  - Run the cmirror init script when starting cluster nodes that use shared storage.
  - Related: bz430737


author: Ryan McCabe <rmccabe@redhat.com> 0.10.0-5
changelog:
  - Fixed bz253341 (failure to start cluster service which had been modifed for correction)
  - Resolves: bz253341


author: Ryan McCabe <rmccabe@redhat.com> 0.10.0-4
changelog:
  - Fixed bz230451 (fence_xvm.key file is not automatically created. Should have a least a default)
  - Resolves: bz230451


author: Ryan McCabe <rmccabe@redhat.com> 0.10.0-1
changelog:
  - Performance improvements.
  - Make the clustermon init script more LSB-compliant
  - Related: bz243701


author: Ryan McCabe <rmccabe@redhat.com> 0.9.2-5
changelog:
  - Version bump
  - Related: bz229027, bz230447, bz230452, bz230454, bz230457,
  - Related: bz230461, bz230469, bz228637, bz233326, bz225747,
  - Related: bz225206, bz225164, bz227758


author: Stanko Kupcevic <kupcevic@redhat.com> 0.9.2-4
changelog:
  - Do not fail on i18n machines
  - Fixed bz225747 (Create/delete cluster - then access disk on node = Generic error on host: cluster tools: cman_tool errored)
  - Fixed bz230454 (Unable to configure a virtual service)
  - Resolves: bz225747, bz230454


author: Stanko Kupcevic <kupcevic@redhat.com> 0.8-12
changelog:
  - Move modcluster from /usr/sbin to /usr/libexec
  - Implement support for Cluster Suite 5
  - Don't auto-start modclusterd after installation, do it manually


author: Ray Strode <rstrode@redhat.com> - 2.14.0-8
changelog:
  - remove path name from hacky killall workaround, so that
    the work around works more reliably (bug 173869, comment 14)


author: Ray Strode <rstrode@redhat.com> - 2.14.0-8
changelog:
  - run autoreconf, so that configure gets updated before 
    it generates libtool (so it doesn't just regenerate
    the original, broken libtool) (again bug 203813)


author: Ray Strode <rstrode@redhat.com> - 2.14.0-7
changelog:
  - regenerate packaged libtool from RHEL version of libtool so
    that rpath's don't get added to plugin DSOs (bug 203813).


author: Matthias Clasen <mclasen@redhat.com> - 2.14.0-4
changelog:
  - Fix an issue with error reporting (#202549)
  - Don't ship static libraries
  - Require pkgconfig for the -devel package


author: Ray Strode <rstrode@redhat.com> 2.13.5-5
changelog:
  - Only sync the database once when installing multiple
    schema files.  Patch by Josselin Mouette <joss@debian.org>.
    (upstream bug 333353)


author: Christopher Aillon <caillon@redhat.com> 2.13.5-2
changelog:
  - Add patch from Mandriva to reload GConf2 every time a schema is
    added or removed (solves bug 173869)


author: Mark McLoughlin <markmc@redhat.com> 2.6.0-7
changelog:
  - Add patch to fix problem when using merged files. Mainly
    neccessary only to work will with GConf 2.8.


author: Warren Togami <wtogami@redhat.com> - 2.6.0-4
changelog:
  - #110724 BR gtk2-devel gettext
  - #106283 add versioned ORBit2 minimum
  - #112863 own /etc/gconf/2/
  - really kill *.la


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 1.2.0
  - own libdir/GConf/2 directory
  - include gtk-doc docs
  - don't include static lib for backend modules


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Use %{_tmppath}
  - Move the .so files to the devel subpackage
  - langify
  - Move changelog to the end, where it should be :)
  - Don't specify (a bad) doc directory
  - Don't define name, version and release and use it in the rpm headers later
  - Remove "Packager:"
  - s/Copyright/License/


author: Havoc Pennington <hp@redhat.com>
changelog:
  - add --direct option to gconftool to avoid spawning oafd,
    then commented out gconftool entirely since it checks
    whether gconfd is running and that spawns oafd anyhow.
    oafd simply needs to exit when unused.


author: Jan Zeleny <jzeleny@redhat.com> - 1.0.7-4
changelog:
  - backported some patches from Fedora:
    503162 - renaming service from fcoe-utils to fcoe
    503164 - adding libhbalinux as dependency
    503165 - invalid free() call
    503167 - correction of long options in fcoeadm
  - patch to install proper init script and correction of that
    script in order to allow functionality without fcoemon


author: Jan Zeleny <jzeleny@redhat.com> - 1.0.7-2
changelog:
  - minor corrections in spec file
  - moved init script to correct location
  - correction in the init script (chkconfig directives)


author: Christopher Aillon <caillon@redhat.com> 1.2.9-4
changelog:
  - NSS has been split out of the mozilla package, so require that now
    and update separate_nspr.patch to account for the new NSS as well


author: Daniel Veillard <veillard@redhat.com> 1.2.7-1
changelog:
  - Upstream release of 1.2.7, mostly bug fixes plus new functions
    to GetKeys from simple store and X509 handling.


author: Daniel Veillard <veillard@redhat.com> 1.2.1-1
changelog:
  - initial packaging based on the upstream one and libxml2 one.
  - desactivated mozilla-nss due to detection/architecture problems


author: Doug Ledford <dledford@redhat.com> - 1.0.8-4.el5
changelog:
  - Rename tarball to reflect that it's from the OFED 1.4.1 package as the md5sum
    of the ofed version of this tarball and the upstream version of the
    same tarball differ


author: Matthias Clasen <mclasen@redhat.com> - 2.8.1-2
changelog:
  - Must use the same rpm macro for the host triplet as the
    gtk2 package, otherwise things can fall apart.  (#137676)


author: Dan Williams <dcbw@redhat.com> - 2.6.4-7
changelog:
  - Fix usage of "%{_bindir}/update-gdk-pixbuf-loaders %{_host}" 
    to point to right place and architecture


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Add a patch that moves the includes to librsvg-1/librsvg
  - in preparation for a later librsvg 2 library.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Put changelog at the end
  - Move .so files to devel subpackage
  - Don't mess with ld.so.conf
  - Don't use %{prefix}, this isn't a relocatable package
  - Don't define a bad docdir
  - Add BuildRequires
  - Use %{_tmppath}
  - Don't define name, version etc. on top of the file (why 
    do so many do that?)
  - s/Copyright/License/


author: John (J5) Palmieri <johnp@redhat.com> - 0.3.1-9
changelog:
  - Add patch to fix struct handling in the dbus glib binding for dbus 0.61
    so image data works again


author: Christopher Aillon <caillon@redhat.com> - 0.3.1-6
changelog:
  - Add patch to determine whether a compositing manager is running
    when drawing a new notification bubble, as long as the CM grabs
    the appropriate XSelection.


author: Christopher Aillon <caillon@redhat.com> - 0.3.1-4
changelog:
  - Provide desktop-notification-daemon, since libnotify requires a
    notification deamon, but not this specific one.  Other notification
    daemons can exist on the system so long as they meet the provides
    (and the API of course).


author: Karsten Hopp <karsten@redhat.de> 1.2.0-2
changelog:
  - package all python files. INSTALLED_FILES doesn't contain files created
    by the brp-python-bytecompile script


author: Patrick Macdonald <patrickm@redhat.com> 0.9.1-7
changelog:
  - explicitly define the constants directory in case a more
    restrictive umask is encountered (#74019)


author: Troy Dawson <dawson@fnal.gov> - 5.1-1
changelog:
  - Moved everything to 51
  - Added the new redhat rpm key
  - Changed sources to be 5rolling instead of 50


author: Troy Dawson <dawson@fnal.gov> - 5.0-3
changelog:
  - Changed sources to reflect the new directory structure
  - added trigger to get rid of additional cd's page of firstboot
  - added more rpm GPG keys


author: Joe Orton <jorton@redhat.com> 0.20.5-2
changelog:
  - update to 0.20.5; many bug fixes, minor security-related
   fixes, much improved SSL support, a few new features.


author: Karsten Hopp <karsten@redhat.com> 3.3.4p7-3.2
changelog:
  - fix font resize problem (#251173)
  - add man page (#240003)
  - enable app-defaults (#240004)
  - fix build issue with icu-3.6-5.9 (#233013)


author: Karsten Hopp <karsten@redhat.de> 3.3.4p7-2
changelog:
  - silence chkconfig
  - rpmlint fixes:
   - replace PreReq/BuildPrereq with Requires/BuildRequires
   - move ibm_hosts to %{_sysconfdir}
   - fix end of line encodings in docs


author: Karsten Hopp <karsten@redhat.de> 3.3.4p6-1
changelog:
  - update to patchlevel 6
  - drop obsolete segfault patch
  - build with modular X
  - build with current openssl
  - gccmakedep is gone, use makedepend wrapper instead


author: Karsten Hopp <karsten@redhat.de> 3.3.4-2
changelog:
  - spec file cleanups from Chris Ricker <kaboom@oobleck.net>
  - remove backup files from rpm patch process


author: Karsten Hopp <karsten@redhat.de> 3.3.3.b2-1
changelog:
  - update to b2, which fixes a segfault when login is done with 
    an entry in .ibm_hosts (via emulate_input)


author: Karsten Hopp <karsten@redhat.de> 3.3.2.p1-5
changelog:
  - update c3270 package to patchlevel2
  - fix buildrequires (#124280)
  - fix compiler warnings (#106312, #78479)


author: Karsten Hopp <karsten@redhat.de> 3.2.19-3
changelog:
  - update to patchlevel 4:
    Re-enable the automatic font switching when the
    x3270 window is resized


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.2.16-1
changelog:
  - 3.2.16
  - adapt patches
  - get rid of the **** pdksh requirement
  - split the tcl version into a different package, no need to require tcl for
    normal use
  - split the x11 frontend into a separate package.
    We don't necessarily have X on a machine where we want to run
    3270 sessions (e.g. s390...)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 3.2.14
  - Add c3270 (textmode x3270) in x3270-text package
  - Fix build
  - Make ibm_hosts a %config(noreplace)


author: Mike A. Harris <mharris@redhat.com> 0.7.1.3-1
changelog:
  - Updated xorg-x11-drv-sisusb to version 0.7.1.3 from X11R7.0
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.7.1.2-1
changelog:
  - Updated xorg-x11-drv-sisusb to version 0.7.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.7.0-0
changelog:
  - Initial spec file for sisusb video driver generated automatically
    by my xorg-driverspecgen script.


author: Guenther Deschner <gdeschner@redhat.com> 3.0.33-3.24.el5
changelog:
  - Fix smbget, rpcclient, smbtree, pdbedit, smbclient and smbcacls manpage
  - resolves: #457195, #457082, #457203, #457384, #457192, #457097


author: Guenther Deschner <gdeschner@redhat.com> 3.0.33-3.15.el5
changelog:
  - Security Release, fixes CVE-2009-1888, CVE-2009-2813, CVE-2009-2948 and CVE-2009-2906
  - resolves: #526661


author: Simo Sorce <ssorce@redhat.com> 3.0.33-3.9.el5
changelog:
  - Raise log level for annoying messages that are normal with
    some idmap backends.
  - resolves: #485382


author: Guenther Deschner <gdeschner@redhat.com> 3.0.28-3.2.el5
changelog:
  - Fix joining and authentication with NT4 and Windows 2000 domains.
  - resolves: #449000
  - resolves: #450533


author: Simo Sorce <ssorce@redhat.com> 3.0.28-1.el5_2.1
changelog:
  - Security fix for CVE-2008-1105
  - Fix join verification
  - Fix smb signing
  - resolves: CVE-2008-1105
  - resolves: #447380
  - resolves: #444637


author: Simo Sorce <ssorce@redhat.com> 3.0.28-0.el5.8
changelog:
  - Yet another 2 patches for regressions related to operations on a DC with
    trusted domains. Fiux idmap with legacy configuration options, and fix the
    pam module, pam logins were broken for trusted domains
  - related: #429024


author: Simo Sorce <ssorce@redhat.com> 3.0.28-0.el5.7
changelog:
  - Add another 2 patches to solve 429024 completely, as some cases were not
    covered:
    - Fix domain trusts while running as a DC
    - Fix credential chain with windows 2008
  - Make some configure flag explicit even if they are on by default so that we
    can catch build errors if something is wrong instead of silently missing
    features supposed to be compiled in
  - related: #429024


author: Simo Sorce <ssorce@redhat.com> 3.0.28-0.el5.6
changelog:
  - Back out moiunt cifs patches for prepath, as the corresponding
    kernel changes can't be put in at this time
  - Add a minor SPNEGO fix
  - related: #370501
  - related: #291501


author: Simo Sorce <ssorce@redhat.com> 3.0.28-0.el5.4
changelog:
  - Add another set of fixes for 429024, turned out this was not
    completely fixed as expected
  - Add some other patches from Guenther to join Windows 2008 (Rc1)
    domain controllers
  - Make sure bad port numbers are reported and smbd exits if it
    can't bind to any port (completes fix for #429003)
  - Fix a regression in ACLs code that was causing samba to set the
    wrong inherited permissions
  - resolves: #429024
  - related: #291501
  - resolves: #429003
  - resolves: #431243


author: Simo Sorce <ssorce@redhat.com> 3.0.28-0.el5.3
changelog:
  - Add 2 more patches to fix a Samba DC talking to trusted
    domains.
  - resolves: #429024
  - related: #291501


author: Simo Sorce <ssorce@redhat.com> 3.0.28-0.el5.1
changelog:
  - Add more fixes on top 3.0.28 as committed upstream
  - Fixes typo and removes trailing spaces in default smb.conf file
  - resolves: #426244
  - related: #291501
  - resolves: #426623
  - resolves: #383351
  - resolves: #425996


author: Simo Sorce <ssorce@redhat.com> 3.0.28-0.el5
changelog:
  - rebase to 3.0.28 (3.0.x is in bugfix/security fix only mode
    since 3.2.x was announced) + later Vista fixes
  - resolves: #291501
  - resolves: #370501


author: Simo Sorce <ssorce@redhat.com> 3.0.25b-1.el5_1.4
changelog:
  - Security fix for CVE-2007-6015
  - Fix for regression introduced with CVE-2007-4572
  - resolves: CVE-2007-6015
  - resolves: CVE-2007-4572


author: Simo Sorce <ssorce@redhat.com> 3.0.25b-0.el5_1.2
changelog:
  - Security fix for CVE-2007-4138
  - Security fix for CVE-2007-4572
  - Security fix for CVE-2007-5398
  - Multilib Fix
  - resolves: #351511
  - resolves: #350771
  - resolves: #359161
  - resolves: #338141


author: Jay Fenlason <fenlason@redhat.com> 3.0.23a-3
changelog:
  - Fix the -logfiles patch to close
    bz#199607 Samba compiled with wrong log path.
    bz#199206 smb.conf has incorrect log file path


author: Jay Fenlason <fenlason@redhat.com> 3.0.23-2
changelog:
  - New upstream release.
  - Use modified filter-requires-samba.sh from packaging/RHEL/setup/
    to get rid of bogus dependency on perl(Unicode::MapUTF8)
  - Update the -logfiles and -smb.conf patches to work with 3.0.23


author: Jay Fenlason <fenlason@redhat.com> 3.0.23-0.RC3
changelog:
  - New upstream RC release.
  - Update the -logfiles, and -passwd patches for
    3.0.23rc3
  - Include the change to smb.init from Bastien Nocera <bnocera@redhat.com>)
    to close
    bz#182560 Wrong retval for initscript when smbd is dead
  - Update this spec file to build with 3.0.23rc3
  - Remove the -install.mount.smbfs patch, since we don't install
    mount.smbfs any more.


author: Jay Fenlason <fenlason@redhat.com> 3.0.21b-2
changelog:
  - New upstream version.
  - Since the rawhide kernel has dropped support for smbfs, remove smbmount
    and smbumount.  Users should use mount.cifs instead.
  - Upgrade to 3.0.21b


author: Jay Fenlason <fenlason@redhat.com> 3.0.20b-2
changelog:
  - turn on -DLDAP_DEPRECATED to allow access to ldap functions that have
    been depricated in 2.3.11, but which don't have well-documented
    replacements (ldap_simple_bind_s(), for example).
  - Upgrade to 3.0.20b, which includes all the previous upstream patches.
  - Updated the -warnings patch for 3.0.20a.
  - Include  --with-shared-modules=idmap_ad,idmap_rid to close
    bz#156810 --with-shared-modules=idmap_ad,idmap_rid
  - Include the new samba.pamd from Tomas Mraz (tmraz@redhat.com) to close
    bz#170259 pam_stack is deprecated


author: Jay Fenlason <fenlason@redhat.com> 3.0.20-2
changelog:
  - New upstream release
    Includes five upstream patches -bug3010_v1, -groupname_enumeration_v3,
      -regcreatekey_winxp_v1, -usrmgr_groups_v1, and -winbindd_v1
    This obsoletes the -pie and -delim patches
    the -warning and -gcc4 patches are obsolete too
    The -man, -passwd, and -smbspool patches were updated to match 3.0.20pre1
    Also, the -quoting patch was implemented differently upstream
    There is now a umount.cifs executable and manpage
    We run autogen.sh as part of the build phase
    The testprns command is now gone
    libsmbclient now has a man page
  - Include -bug106483 patch to close
    bz#106483 smbclient: -N negates the provided password, despite documentation
  - Added the -warnings patch to quiet some compiler warnings.
  - Removed many obsolete patches from CVS.


author: Jay Fenlason <fenlason@redhat.com> 3.0.14a-2
changelog:
  - New upstream release.
  - the -64bit-timestamps, -clitar, -establish_trust, user_rights_v1,
    winbind_find_dc_v2 patches are now obsolete.


author: Jay Fenlason <fenlason@redhat.com> 3.0.13-2
changelog:
  - New upstream release
  - add my -quoting patch, to fix swat with strings that contain
    html meta-characters, and to use correct quote characters in
    lists, closing bz#134310
  - include the upstream winbindd_2k3sp1 patch
  - include the -smbclient patch.
  - include the -hang patch from upstream.


author: Jay Fenlason <fenlason@redhat.com> 3.0.11-4
changelog:
  - Use the updated filter-requires-samba.sh file, so we don't accidentally
    pick up a dependency on perl(Crypt::SmbHash)


author: Jay Fenlason <fenlason@redhat.com> 3.0.11-3
changelog:
  - add -gcc4 patch to compile with gcc 4.
  - remove the now obsolete -smbclient-kerberos.patch
  - Include four upstream patches from
    http://samba.org/~jerry/patches/post-3.0.11/
    (Slightly modified the winbind_find_dc_v2 patch to apply easily with
    rpmbuild).


author: Jay Fenlason <fenlason@redhat.com> 3.0.10-4
changelog:
  - Update the -man patch to fix ntlm_auth.1 too.
  - Move pam_smbpass.so to the -common package, so both the 32
    and 64-bit versions will be installed on multiarch platforms.
    This closes bz#143617
  - Added new -delim patch to fix mount.cifs so it can accept
    passwords with commas in them (via environment or credentials
    file) to close bz#144198


author: Jay Fenlason <fenlason@redhat.com> 3.0.10-2
changelog:
  - New upstream release that closes CAN-2004-1154  bz#142544
  - Include the -64bit patch from Nalin.  This closes bz#142873
  - Update the -logfiles patch to work with 3.0.10
  - Create /var/run/winbindd and make it part of the -common rpm to close
    bz#142242


author: Jay Fenlason <fenlason@redhat.com> 3.0.9-2
changelog:
  - New upstream release.  This obsoletes the -secret patch.
    Include my changetrustpw patch to make "net ads changetrustpw" stop
    aborting.  This closes #134694
  - Remove obsolete triggers for ancient samba versions.
  - Move /var/log/samba to the -common rpm.  This closes #76628
  - Remove the hack needed to get around the bad docs files in the
    3.0.8 tarball.
  - Change the comment in winbind.init to point at the correct pidfile.
    This closes #76641


author: Than Ngo <than@redhat.com> 3.0.8-4
changelog:
  - fix unresolved symbols in libsmbclient which caused applications
    such as KDE's konqueror to fail when accessing smb:// URLs. #139894


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-3.1
changelog:
  - Rescue the install.mount.smbfs patch from Juanjo Villaplana
    (villapla@si.uji.es) to prevent building the srpm from trashing your
    installed /usr/bin/smbmount


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-3
changelog:
  - Include the corrected docs tarball, and use it instead of the
    obsolete docs from the upstream 3.0.8 tarball.
  - Update the logfiles patch to work with the updated docs.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-2
changelog:
  - New upstream version fixes CAN-2004-0930.  This obsoletes the
    disable-sendfile, salt, signing-shortkey and fqdn patches.
  - Add my <fenlason@redhat.com> ugly non-ascii-domain patch.
  - Updated the pie patch for 3.0.8.
  - Updated the logfiles patch for 3.0.8.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-0.pre1.3
changelog:
  - disable the -salt patch, because it causes undefined references in
    libsmbclient that prevent gnome-vfs from building.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-0.pre1.2
changelog:
  - Re-enable the x_fclose patch that was accidentally disabled
    in 3.0.8-0.pre1.1.  This closes #135832
  - include Nalin's -fqdn and -salt patches.


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Include patch from Steven Lawrance (slawrance@yahoo.com) that modifies
    smbmnt to work with 32-bit uids.


author: Jay Fenlason <fenlason@redhat.com> 3.0.7-4
changelog:
  - Update docs section to not carryover the docs/manpages directory
    This moved many files from /usr/share/doc/samba-3.0.7/docs/* to
    /usr/share/doc/samba-3.0.7/*
  - Modify spec file as suggested by Rex Dieter (rdieter@math.unl.edu)
    to correctly create libsmbclient.so.0 and to use /etc/rc.d/init.d instead
    of rolling our own.  This closes #132642
  - Add patch to default "use sendfile" to no, since sendfile appears to
    be broken
  - Add patch from Volker Lendecke <vl@samba.org> to help make
    ldapsam_compat work again.
  - Add patch from "Vince Brimhall" <vbrimhall@novell.com> for ldapsam_compat
    These two patches close bugzilla #132169


author: Jay Fenlason <fenlason@redhat.com> 3.0.7-3
changelog:
  - Upgrade to 3.0.7, which fixes CAN-2004-0807 CAN-2004-0808
    This obsoletes the 3.0.6-schema patch.
  - Update BuildRequires line to include openldap-devel openssl-devel
    and cups-devel


author: Jay Fenlason <fenlason@redhat.com> 3.0.6-3
changelog:
  - New upstream version.
  - Include post 3.0.6 patch from "Gerald (Jerry) Carter" <jerry@samba.org>
    to fix a duplicate in the LDAP schema.
  - Include 64-bit timestamp patch from Ravikumar (rkumar@hp.com)
    to allow correct timestamp handling on 64-bit platforms and fix #126109.
  - reenable the -pie patch.  Samba is too widely used, and too vulnerable
    to potential security holes to disable an important security feature
    like -pie.  The correct fix is to have the toolchain not create broken
    executables when programs compiled -pie are stripped.
  - Remove obsolete patches.
  - Modify this spec file to put libsmbclient.{a,so} in the right place on
    x86_64 machines.


author: Jason Vas Dias <jvdias@redhat.com> 3.0.5-3
changelog:
  - Removed '-pie' patch - 3.0.5 uses -fPIC/-PIC, and the combination
  - resulted in executables getting corrupt stacks, causing smbmnt to
  - get a SIGBUS in the mount() call (bug 127420).


author: Jay Fenlason <fenlason@redhat.com> 3.0.5-2
changelog:
  - Upgrade to 3.0.5, which is a regression from 3.0.5pre1 for a
    security fix.
  - Include the 3.0.4-backport patch from the 3E branch.  This restores
    some of the 3.0.5pre1 and 3.0.5rc1 functionality.


author: Jay Fenlason <fenlason@redhat.com> 3.0.5-0.pre1.1
changelog:
  - Backport base64_decode patche to close CAN-2004-0500
  - Backport hash patch to close CAN-2004-0686
  - use_authtok patch from Nalin Dahyabhai <nalin@redhat.com>
  - smbclient-kerberos patch from Alexander Larsson <alexl@redhat.com>
  - passwd patch uses "*" instead of "x" for "hashed" passwords for
    accounts created by winbind.  "x" means "password is in /etc/shadow" to
    brain-damaged pam_unix module.


author: Jay Fenlason <fenlason@redhat.com> 3.0.5.0pre1.0
changelog:
  - New upstream version
  - use % { SOURCE1 } instead of a hardcoded path
  - include -winbind patch from Gerald (Jerry) Carter (jerry@samba.org)
    https://bugzilla.samba.org/show_bug.cgi?id=1315
    to make winbindd work against Windows versions that do not have
    128 bit encryption enabled.
  - Moved /usr/bin/net to the -common package, so that folks who just
    want to use winbind, etc don't have to install -client in order to
    "net join" their domain.
  - New upstream version obsoletes the patches added in 3.0.3-5
  - Remove smbgetrc.5 man page, since we don't ship smbget.


author: Jay Fenlason <fenlason@redhat.com> 3.0.3-5
changelog:
  - Patch to allow password changes from machines patched with
    Microsoft hotfix MS04-011.
  - Include patches for https://bugzilla.samba.org/show_bug.cgi?id=1302
    and https://bugzilla.samba.org/show_bug.cgi?id=1309


author: jay Fenlason <fenlason@redhat.com> 3.0.3-3.rc1
changelog:
  - New upstream version
  - updated spec file to make libsmbclient.so executable.  This closes
    bugzilla #121356


author: Jay Fenlason <fenlason@redhat.com> 3.0.3-2.pre2
changelog:
  - New upstream version  
  - Updated configure line to remove --with-fhs and to explicitly set all
    the directories that --with-fhs was setting.  We were overriding most of
    them anyway.  This closes #118598


author: Jay Fenlason <fenlason@redhat.com> 3.0.3-1.pre1
changelog:
  - New upstream version.
  - Updated -pie and -logfiles patches for 3.0.3pre1
  - add krb5-devel to buildrequires, fixes #116560
  - Add patch from Miloslav Trmac (mitr@volny.cz) to allow non-root to run
    "service smb status".  This fixes #116559


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Change all requires lines to list an explicit epoch.  Closes #102715
  - Add an explicit Epoch so that 0 is defined.


author: Jay Fenlason <fenlason@redhat.com> 3.0.2-5
changelog:
  - New upstream version: 3.0.2 final includes security fix for #114995
    (CAN-2004-0082)
  - Edit postun script for the -common package to restart winbind when
    appropriate.  Fixes bugzilla #114051.


author: Jay Fenlason <fenlason@redhat.com> 3.0.2-3rc2
changelog:
  - add %dir entries for /usr/lib/samba and /usr/lib/samba/charset
  - Upgrade to new upstream version
  - build mount.cifs for the new cifs filesystem in the 2.6 kernel.


author: Felipe Alfaro Solana <felipe_alfaro@linuxmail.org> 3.0.1-1
changelog:
  - Update to 3.0.1
  - Removed testparm patch as it's already merged
  - Removed Samba.7* man pages
  - Fixed .buildroot patch
  - Fixed .pie patch
  - Added new /usr/bin/tdbdump file


author: Jay Fenlason <fenlason@redhat.com> 3.0.0-15
changelog:
  - New 3.0.0 final release
  - merge nmbd-netbiosname and testparm patches from 3E branch
  - updated the -logfiles patch to work against 3.0.0
  - updated the pie patch
  - update the VERSION file during build
  - use make -j if avaliable
  - merge the winbindd_privileged change from 3E
  - merge the "rm /usr/lib" patch that allows Samba to build on 64-bit
    platforms despite the broken Makefile


author: Jay Fenlason <fenlason@redhat.com> 3.0.0-3beta3
changelog:
  - Merge from 3.0.0-2beta3.3E
  - (Correct log file names (#100981).)
  - (Fix pidfile directory in samab.log)
  - (Remove obsolete samba-3.0.0beta2.tar.bz2.md5 file)
  - (Move libsmbclient to the -common package (#99449))


author: Jay Fenlason <fenlason@redhat.com> 2.2.8a-2
changelog:
  - add libsmbclient.so for gnome-vfs-extras
  - Edit specfile to specify /var/run for pid files
  - Move /tmp/.winbindd/socket to /var/run/winbindd/socket


author: Jay Fenlason <fenlason@redhat.com> 2.2.8a-1
changelog:
  - upgrade to 2.2.8a
  - remove old .md5 files
  - add "pid directory = /var/run" to the smb.conf file.  Fixes #88495
  - Patch from jra@dp.samba.org to fix a delete-on-close regression


author: Jay Fenlason <fenlason@redhat.com> 2.2.8-0
changelog:
  - Upgrade to 2.2.8
  - removed commented out patches.
  - removed old patches and .md5 files from the repository.
  - remove duplicate /sbin/chkconfig --del winbind which causes
    warnings when removing samba.
  - Fixed minor bug in smbprint that causes it to fail when called with
    more than 10 parameters: the accounting file (and spool directory
    derived from it) were being set wrong due to missing {}.  This closes
    bug #86473.
  - updated smb.conf patch, includes new defaults to close bug #84822.


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.7a-4
changelog:
  - relink libnss_wins.so with SHLD="gcc -lnsl" to force libnss_wins.so to
    link with libnsl, avoiding unresolved symbol errors on functions in libnsl


author: Jay Fenlason <fenlason@redhat.com> 2.2.7a-3
changelog:
  - edited spec file to put .so files in the correct directories
    on 64-bit platforms that have 32-bit compatability issues
    (sparc64, x86_64, etc).  This fixes bugzilla #83782.
  - Added samba-2.2.7a-error.patch from twaugh.  This fixes
    bugzilla #82454.


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.5-7
changelog:
  - Enable VFS support and compile the "recycling" module (#69796)
  - more selective includes of the examples dir


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.3a-3
changelog:
  - include interfaces.o in pam_smbpass.so, which needs symbols from interfaces.o
    (patch posted to samba-list by Ilia Chipitsine)


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.2-6
changelog:
  - Move winbind files to samba-common. Add separate initscript for
    winbind 
  - Fixes for winbind - protect global variables with mutex, use
    more secure getenv


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.2-5
changelog:
  - Teach smbadduser about "getent passwd" 
  - Fix more pid-file references
  - Add (conditional) winbindd startup to the initscript, configured in
    /etc/sysconfig/samba


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.2-3
changelog:
  - Add "--with-utmp" to configure options (#55372)
  - Include winbind, pam_smbpass.so, rpcclient and smbcacls
  - start using /var/cache/samba, we need to keep state and there is
    more than just locks involved


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Don't include smbpasswd in samba, it's in samba-common (#51598)
  - Add a disabled "obey pam restrictions" statement - it's not
    active, as we use encrypted passwords, but if the admin turns
    encrypted passwords off the choice is available. (#31351)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Use /var/cache/samba instead of /var/lock/samba 
  - Remove "domain controller" keyword from smb.conf, it's 
    deprecated (from #13704)
  - Sync some examples with smb.conf.default
  - Fix password synchronization (#16987)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  (these changes are from the non-head version)
  - Don't include /usr/sbin/samba, it's the same as the initscript
  - unset TMPDIR, as samba can't write into a TMPDIR owned 
    by root (#41193)
  - Add pidfile: lines for smbd and nmbd and a config: line
    in the initscript  (#15343)
  - don't use make -j
  - explicitly include /usr/share/samba, not just the files in it


author: Helge Deller <hdeller@redhat.de>
changelog:
  - build as 2.2.0-1 release
  - skip the documentation-directories docbook, manpages and yodldocs
  - don't include *.sgml documentation in package
  - moved codepage-directory to /usr/share/samba/codepages
  - make it compile with glibc-2.2.3-10 and kernel-headers-2.4.2-2


author: Helge Deller <hdeller@redhat.de>
changelog:
  - updated to samba 2.2.0
  - moved codepages to /usr/share/samba/codepages
  - use all available CPUs for building rpm packages
  - use %{_xxx} defines at most places in spec-file
  - "License:" replaces "Copyright:"
  - dropped excludearch sparc
  - de-activated japanese patches 100 and 200 for now 
    (they need to be fixed and tested wth 2.2.0)
  - separated swat.desktop file from spec-file and added
    german translations
  - moved /etc/sysconfig/samba to a separate source-file
  - use htmlview instead of direct call to netscape in 
    swat.desktop-file


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - tweak the PAM code some more to try to do a setcred() after initgroups()
  - pull in all of the optflags on i386 and sparc
  - don't explicitly enable Kerberos support -- it's only used for password
    checking, and if PAM is enabled it's a no-op anyway


author: Bill Nottingham <notting@redhat.com>
changelog:
  - i18n-ize initscript
  - add a sysconfig file for daemon options (#23550)
  - clarify smbpasswd man page (#23370)
  - build with LFS support (#22388)
  - avoid extraneous pam error messages (#10666)
  - add Urban Widmark's bug fixes for smbmount (#19623)
  - fix setgid directory modes (#11911)
  - split swat into subpackage (#19706)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - set a default CA certificate path in smb.conf (#19010)
  - require openssl >= 0.9.5a-20 to make sure we have a ca-bundle.crt file


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix swat only_from line (#18726, others)
  - fix attempt to write outside buildroot on install (#17943)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - move initscript back
  - remove 'Using Samba' book from %doc 
  - move stuff to /etc/samba (#13708)
  - default configuration tweaks (#13704)
  - some logrotate tweaks


author: Than Ngo <than@redhat.de>
changelog:
  - add initdir macro to handle the initscript directory
  - add a new macro to handle /etc/pam.d/system-auth


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix yp_get_default_domain in autoconf
  - only link against readline for smbclient
  - fix log rotation (#9909)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - use cp rather than mv to preserve /etc/services perms (#4938 et al).
  - use mktemp to generate /etc/tmp.XXXXXX file name.
  - add prereqs on sed/mktemp/killall (need to move killall to /bin).
  - fix trigger syntax (i.e. "samba < 1.9.18p7" not "samba < samba-1.9.18p7")


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 2.0.5
  - fix mount.smb - smbmount options changed again.........
  - fix postun. oops.
  - update some stuff from the samba team's spec file.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add a mount.smb to make smb mounting a little easier.
  - smb filesystems apparently don't work on alpha. Oops.


author: Erik Troan <ewt@redhat.com>
changelog:
  - made the %postun script a tad less agressive; no reason to remove
    the logs or lock file (after all, if the lock file is still there,
    samba is still running)
  - the %postun and %preun should only exectute if this is the final
    removal
  - migrated %triggerpostun from Red Hat's samba package to work around
    packaging problems in some Red Hat samba releases


author: John H Terpstra <jht@samba.anu.edu.au>
changelog:
  - Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
  - Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
  - Compounded make line
  - Updated smb.init restart mechanism
  - Use compound mkdir -p line instead of individual calls to mkdir
  - Fixed smb.conf file path for log files
  - Fixed smb.conf file path for incoming smb print spool directory
  - Added a number of options to smb.conf file
  - Added smbadduser command (missed from all previous RPMs) - Doooh!
  - Added smbuser file and smb.conf file updates for username map


author: Jason Vas Dias <jvdias@redhat.com> - 2.14-4
changelog:
  - fix bug 191911: make test fails when default Parser is XML::SAX::PurePerl -
                    succeeds when default Parser is XML::LibXML::SAX -
  	          +BuildRequires: perl(XML::LibXML) perl(XML::LibXML::Common)


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:2.12-0.fdr.2
changelog:
  - missing $RPM_OPT_FLAGS in the %build
  LANG=C
  export LANG
  unset DISPLAY
   section.
  - optional test module as build requirement perl(Tie::IxHash).


author: Than Ngo <than@redhat.com> 6:3.5.4-1
changelog:
  - apply upstream patches,
     - Kmail crashes on startup, kde#132008
     - Cannot send to addresses containing an ampersand (&), kde#117882


author: Than Ngo <than@redhat.com> 6:3.5.2-2
changelog:
  - fix #190491, korganizer crashes whenever New Event selected
  - fix crash from proko2
  - possibly fix crash while selecting mail in mail header view
  - fix #122571, kmail doesn't remember "fallback character encoding" setting
  - fix #126571, kmail crashes when pressing "Send again..." in drafts folder
  - fix syntax error in /usr/bin/kmail_clamav.sh


author: Than Ngo <than@redhat.com> 6:3.4.1-1
changelog:
  - add kdepim-kpilot-fix.diff
  - update to 3.4.1
  - remove kdepim-3.4.0-long.patch, it's included in new upstream


author: Than Ngo <than@redhat.com> 3.3.2-0.1
changelog:
  - update to 3.3.2
  - get rid of the kdepim-3.3.1-cvs.patch, kdepim-3.3.0-holiday.patch,
    both are included in 3.3.2


author: Than Ngo <than@redhat.com> 6:3.2.0-0.3
changelog:
  - 3.2.0 release
  - built with qt 3.3.0
  - add patch file from Stable branch, fix some critical bugs in kmail


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to CVS
  - Enable building kpilot
  - Obsolete kpilot
  - Don't exclude ia64, use -O0 on ia64
  - Disable building kpilot on ia64 (compiler breakage)


author: Mike A. Harris <mharris@redhat.com> 1.0.3-2
changelog:
  - Added "BuildRequires: xorg-x11-proto-devel >= 7.0-1" as xcursor.pc indicates
    "damageproto >= 1.0" is required.
  - Added "Requires: xorg-x11-proto-devel >= 7.0-1, libXfixes-devel" to devel
    package also, as per xcursor.pc
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 1.0.2.1-1
changelog:
  - Updated libXdamage to version 1.0.2.1 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.2-1
changelog:
  - Updated libXdamage to version 1.0.2 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Tim Waugh <twaugh@redhat.com> 1.0.5-0.20010605
changelog:
  - CVS snapshot 2001-06-05.
  - Don't install xscanimage plug-in symlinks.  The old sane package never
    used to do this, and it looks confusing in gimp if you also have
    xsane-gimp (which is better) installed.  xscanimage works stand-alone
    anyhow.


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 6.3.6-1.1
changelog:
  - Fix APOP vulnerability (CVE-2007-1558)
    Resolves: #241196
  - Fix broken support for KPOP
    Resolves: #224018


author: Miloslav Trmac <mitr@redhat.com> - 6.3.3-2
changelog:
  - Fix some type mismatches on 64-bit architectures
  - Fix checking for res_* on architectures with newer glibc ABI


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - switch to Robert Scheck's fix for capa probing endless loop on pop servers
    which don't support capa (#115474)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - split the use-correct-service-name and check-for-gssapi-in-pop portions of
    gssapi+pop fix into pieces
  - only trigger pop capa probe if authentication method != password


author: Nalin Dahyabhai <nalin@redhat.com> 6.2.0-8
changelog:
  - add patch to not truncate headers which have been munged to include a
    hostname where one didn't exist before (CAN-2003-0792), backport from fix
    for 6.2.4 included in 6.2.5


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add patch to reject bogusly large message counts, backported from 5.9.10
  - build for RHL 6.2 errata


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix handling of "any" authentication (#32527)
  - accept more arguments to --auth
  - parse "auth password" correctly in the configuration file


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 5.7.2
  - call AC_PROG_MAKE_SET in configure.in
  - fix various things which cause it to not compile if gssapi is enabled


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - version 5.2.7
  - add patch so that fetchmailconf will not output ssl configure statements
    is no ssl is configured


author: Ondrej Vasik <ovasik@redhat.com> - 3.7.11-4.el5_5.3
changelog:
  - Related: CVE-2010-2251 - document change of xfer:clobber default
    value in manpage, respect xfer:clobber on with xfer:auto-rename on
    (old behaviour)


author: Ondrej Vasik <ovasik@redhat.com> - 3.7.11-4.el5_5.2
changelog:
  - Related: CVE-2010-2251 - describe new option xfer:auto-rename 
    which could restore old behaviour in manpage


author: Jiri Skala <jskala@redhat.com> - 3.7.11-2
changelog:
  - Resolves: #504591 - Problems with spaces in file names over HTTP
  - Resolves: #504594 - Alias ''edit' has multiple flaws


author: Jiri Skala <jskala@redhat.com> - 3.7.11-1
changelog:
  - Resolves: #468858 - Clean up lftp source code - corrected licensing
  - Resolves: #458777 - License conflict between OpenSSL and GNU GPL v2 licenses in lftp
  - Resolves: #461922 - lftp 'help mirror' does not display all options defined in manpage
  - Resolves: #308721 - re-base to latest upstream 3.7.11


author: Jiri Skala <jskala@redhat.com> - 3.7.3-1
changelog:
  - Resolves: #308721 rebase to latest upstream
  - Resolves: #239334 solves CVE-2007-2348
  - Resolves: #422881 fixes bug with -c options
  - Resolves: #434294 fixes bug in (m)put with usage -c option


author: Jason Vas Dias<jvdias@redhat.com> - 3.3.5-4
changelog:
  - fix bug 176315: openssl libraries not being picked up - gnutls was instead
  - improvements to bug 172376 fix


author: Jason Vas Dias<jvdias@redhat.com> - 3.3.5-1
changelog:
  - Upgrade to version 3.3.5
  - fix bug bz172376 : host lookups should use any address found after timeout


author: Jason Vas Dias <jvdias@redhat.com> - 3.3.2-1
changelog:
  - *** PLEASE COULD ANYONE MODIFYING lftp TEST IT BEFORE SUBMITTING! ***
    (and preferably contact the lftp package maintainer (me) first - thank you!)
    bug 171096 : 'mget files in lftp causes abort' (core dump actually)
    resulted from not doing so .
    See http://lftp.yar.ru :
        Recent events:
        2005-10-17: lftp-3.3.2 released. Fixed a coredump caused by double-free.


author: Nalin Dahyabhai <nalin@redhat.com> 2.6.10-3
changelog:
  - add patch to avoid DoS when connecting to HTTP servers (or "HTTP" "servers")
    which don't provide status headers, or provide empty lines instead of status
    headers


author: Nalin Dahyabhai <nalin@redhat.com> 2.6.10-1
changelog:
  - update to 2.6.10, which folds in the previous patches
  - configure with --with-debug so that we get useful debug info


author: Nalin Dahyabhai <nalin@redhat.com> 2.6.9-1
changelog:
  - include patch based on patch from Ulf Härnhammar to fix unsafe use of
    sscanf when reading http directory listings (CAN-2003-0963)
  - include patch based on patch from Ulf Härnhammar to fix compile warnings
    modified based on input from Solar Designer


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - explicitly list the modules which are built when the package compiles, so
    that module build failures (for whatever reason) get caught


author: Tim Powers <timp@redhat.com>
changelog:
  - patched to build with gcc-2.96
  - use gcc instead of c++ for CXX, otherwise you expose an ICE in gcc when
    using g++ on two files, one being a C++ source, and the other a C source.
    Using gcc does the correct thing.


author: Tim Waugh <twaugh@redhat.com> 3.9.8-10
changelog:
  - Remove more programs that require PyQt4: hp3-faxsetup,
    hp3-linefeedcal, hp3-pqdiag, hp3-printsettings, hp3-wificonfig.


author: Tim Waugh <twaugh@redhat.com> 3.9.8-9
changelog:
  - Further use of unavailable dbus features removed.
  - Don't ship hp3-devicesettings as it requires PyQt4.


author: Tim Waugh <twaugh@redhat.com> 3.9.8-3
changelog:
  - Fixes from package review:
    - Use python_sitearch macro.
    - Avoided macro in comment.
    - The libsane-hpaio3 sub-package requires sane-backends-libs for
      directories.


author: Tim Waugh <twaugh@redhat.com> 3.9.8-2
changelog:
  - Fixes from package review:
    - Main package and hpijs sub-package require cups for directories.
    - The common sub-package requires udev for directories.
    - The libs sub-package requires python for directories.
    - Avoided macro in comment.
    - The lib sub-package now runs ldconfig for post/postun.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fixed weird type issue in Qt3 UI.
  - No working systray support for Qt3 so just run the userspace daemon
    when hp-systray is called (bug #506645).
  - Use correct fax PPD name (bug #506645).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Backported 3.9.8 from Red Hat Enterprise Linux 6 (bug #506645).
    - Use Qt-3 instead of Qt-4.
    - Dropped python-reportlab requirement as not available in Red Hat
      Enterprise Linux 5.


author: Mike A. Harris <mharris@redhat.com> 4.0.1.2-1
changelog:
  - Updated xorg-x11-drv-rendition to version 4.0.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.
  - Remove unnecessary *.data files from moduledir.


author: Mike A. Harris <mharris@redhat.com> 4.0.0.1-1
changelog:
  - Updated xorg-x11-drv-rendition to version 4.0.0.1 from X11R7 RC1
  - Fix *.la file removal.
  - Added v10002d.uc, v20002d.uc, vgafont-std.data, vgafont-vrx.data,
    vgapalette.data to file manifest, although these really belong as C files
    in the source, that end up built into the driver.


author: Mike A. Harris <mharris@redhat.com> 4.0.0-0
changelog:
  - Initial spec file for rendition video driver generated automatically
    by my xorg-driverspecgen script.


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Patch from Anthony Fok, to fix problem where fangsongti16.bdf
    wasn't considered to cover english because it didn't have
    e-diaresis. (Causing bad font choice in Anaconda)


author: Colin Walters <walters@redhat.com> 1.3.0-3
changelog:
  - Fix trivial conflict in glib patch and reapply; this
    removes dependency on glib2.0 and therefore prevents
    symbol clashes with applications loading arts still
    using glib 1.2, like XMMS.


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.0.0-3
changelog:
  - Change sonames to something indicating the compiler version if a compiler
    < gcc 3.1 is used
  - Add compat symlinks for binary compatibility with other distributions


author: Tim Waugh <twaugh@redhat.com> 1.0-1
changelog:
  - Merged all the DTD packages into one (bug #58448).
  - Use /usr/share/sgml exclusively.
  - Prevent catalog files from disappearing on upgrade (bug #58463).


author: Tim Waugh <twaugh@redhat.com> 1.0-7
changelog:
  - Use xmlcatalog (libxml2) instead of install-catalog (sgml-common) in
    scriptlets.
  - Conflict with install-catalog if it can't handle quotes in catalogs.
  - Use release number in centralized catalog name, so that the scriptlets
    work properly.


author: Chris Runge <crunge@pobox.com>
changelog:
  - Provides: docbook-dtd-xml (not docbook-dtd-sgml)
  - undo catalog patch and dbcentx patch (this resulted in an effectively
    broken DTD when the document was processed with XSL stylesheets); added a
    symbolic link to retain docbook.cat -> catalog; added ent
  - added ChangeLog to doc


author: Chris Runge <crunge@pobox.com>
changelog:
  - created a 4.1.2 version
  - update required a change to OTHERCAT in postun
  - update required a change to the Makefile patch (no dbgenent.ent any more,
    apparently)


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Don't play so many macro games.
  - Don't use 'rpm' in post scripts.
  - Be sure to own xml-dtd-4.1 directory.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change group.
  - Use %{_tmppath}.
  - Correct typo.
  - rm before install
  - openjade not jade.
  - Build requires unzip.
  - Require install-catalog for post and postun.
  - Change Copyright: to License:.
  - Remove Packager: line.


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - rebuild to get compressed man pages
  - fix description
  - some minor tweaks to the spec file
  - add docs
  - fix build on alpha (alphaev6 stuff)


author: Robin Norwood <rnorwood@redhat.com> 0.59-2
changelog:
  - Resolves: rhbz#245620
  - Backport patch to fix dn_expand looping issue
  - Backport patch to randomize ID field


author: Ville Skyttä <ville.skytta at iki.fi> - 0.49-2
changelog:
  - Explicitly disable tests requiring network access at build time.
  - Exclude Win32 and Cygwin specific modules.
  - More specfile cleanups.
  - Honor $RPM_OPT_FLAGS.


author: David Cantrell <dcantrell@redhat.com> - 8.4.0-1
changelog:
  - Upgraded to tclx-8.4.0
  - Removed patches that applied to the old build method for tclx
  - Removed Tcl and Tk doc archives


author: Jens Petersen <petersen@redhat.com> - 8.3.5-6
changelog:
  - add unversioned symlinks to the static libs (Dave Botsch, 149734)
  - rebuild with gcc 4
    - add tclx-8.3.5-clock_t-gcc4.patch to skip clock_t test in configure
    - buildrequire autoconf213


author: Jens Petersen <petersen@redhat.com> - 8.3.5-1
changelog:
  - new package split out from tcltk
  - update to 8.3.5 release
  - update source url
  - no longer need tclx-8.3-argv.patch and tclx-8.3-helpdir.patch
  - new devel and doc subpackages
  - set TCLX_INST_LIB for configure
  - add symlink for libtkx.so too
  - clean build remnants from tclxConfig.sh and tkxConfig.sh
  - rename memory.n to Memory.n, since tcl provides memory.n
  - move help and manpages to -doc subpackage
  - filtered out non-tclx changelog entries
  - define tcltk_ver and use it
  - include copy of tcl and tk manpages for buildhelp and
    apply tclx-8.3.5-tcltk-man-help.patch to point at them


author: Jens Petersen <petersen@redhat.com> - 8.3.5-84
changelog:
  - link all libs with DT_SONAME using tcl.m4 patch (#81297)
  - drop synthetic lib provides
  - remove obsolete patches from srpm
  - update buildrequires
  - use buildroot instead of RPM_BUILD_ROOT
  - install all man pages under mandir, instead of moving some from /usr/man
  - introduce _genfilelist macro for clean single-sweep find filelist generation
    for each package
  - use perl to remove buildroot prefix from filelists


author: Jens Petersen <petersen@redhat.com> 8.3.5-77
changelog:
  - build and install tclx with _libdir (not libdir!)
  - fix summary-not-capitalized for tclx, tcllib, tcl-html


author: Jens Petersen <petersen@redhat.com> 8.3.5-76
changelog:
  - make it build on x86_64 (details below)
  - don't explicitly update config.{guess,sub} since %configure does it for us
  - build and install tclx and tkx with INST_RUNTIME files under datadir, and
    EXEC_RUNTIME file under libdir
  - generate filelists from datadir and not from mandir from now on


author: Jens Petersen <petersen@redhat.com>
changelog:
  - update url for tcl, tk, tclx, itcl, tcllib
  - build without all makecfg patches for now
    - in particular use upstream versioned library name convention
  - add backward compatible lib symlinks for now
  - use make's -C option rather than jumping in and out of source dirs
    during install
  - use INSTALL_ROOT destdir-like make variable instead of makeinstall
    for all subpackages except tix and itcl


author: Adrian Havill <havill@redhat.com>
changelog:
  - re-enable glibc string and math inlines; recent gcc is a-ok.
  - optimize at -O2 instead of -O
  - rename "soname" patches related to makefile/autoconf changes
  - added elf "needed" for tk, tclx, tix, itk
  - removed warnings from tclX


author: Adrian Havill <havill@redhat.com>
changelog:
  - updated tclX to the latest version
  - fixed tclX 8.3's busted help install
  - eliminated make TK_LIB kludge for multiple math libs for tclX
  - used %makeinstall to brute force fix any remaining unflexible makefile dirs


author: Adrian Havill <havill@redhat.com>
changelog:
  - refresh all sources to latest stable (TODO: separate expect/expectk)
  - massage out some build stuff to patches (TODO: libtoolize hacked constants)
  - remove patches already rolled into the upstream
  - removed RPATH (bugs 45569, 46085, 46086), added SONAMEs to ELFs
  - changed shared object filenames to something less gross
  - fixed tclX shell's argv parsing (bug 47710)


author: Sumit Bose <sbose@redhat.com> - 1.0.112-1
changelog:
  - Updated to ctdb version 1.0.112 maintenance release 18,
     git commit de49edcc0dfea7c4396cdbd9e4897358b5474100
     resolves: #611854
   - substituted $RPM_BUILD_ROOT by %{buildroot}
   - fix permissions on event scripts
   - fixed rpmlint warnings
   - added fix for bz537223


author: : Version 1.0.82
changelog:
  - Update the "ctdb lvsmaster" command to return -1 on error.
   - Add a -Y flag to "ctdb lvsmaster"
   - RHEL5 apache leaks semaphores when crashing. Add semaphore cleanup to the
     41.httpd eventscript and try to restart apache when it has crashed.
   - Fixes to some tests
   - Add a -o option to "onnode" which will redirect all stdout to a file for
     each of the nodes.
   - Add a natgw and a lvs node specifier to onnode so that we can use
     "onnode natgw ..."
   - Assign the natgw address to lo instead of the private network so it can also
     be used where private and public networks are the same.
   - Add GPL boilerplates to two missing scripts.
   - Change the natgw prefix NATGW_ to CTDB_NATGW_


author: : Version 1.0.81
changelog:
  - use smbstatus -np instead of smbstatus -n in the 50.samba eventscript
     since this avoids performing an expensive traverse on the locking and brlock
     databases.
   - make ctdb automatically terminate all traverse child processes clusterwide
     associated to a client application that terminates before the traversal is
     completed.
   - From Sumit Bose : fixes to AC_INIT handling.
   - From Michael Adam, add Tridge's "ping_pong" tool the the ctdb distro since
     this is very useful for testing the backend filesystem.
   - From Sumit bose, add support for additional 64 bit platforms.
   - Add a link from the webpage to Michael Adams SambaXP paper on CTDB.


author: : Version 1.0.80
changelog:
  - change init shutdown level to 01 for ctdb so it stops before any of the
     other services
   - if we can not pull a database from a remote node during recovery, mark that
     node as a culprit so it becomes banned
   - increase the loglevel when we volunteer to drop all ip addresses after
     beeing in recovery mode for too long. Make this timeout tuneable with
     "RecoveryDropAllIPs" and have it default to 60 seconds
   - Add a new flag TDB_NO_NESTING to the tdb layer to prevent nested
     transactions which ctdb does not use and does not expect. Have ctdb set this
     flag to prevent nested transactions from occuring.
   - dont unconditionally kill off ctdb and restrat it on "service ctdb start".
     Fail "service ctdb start" with an error if ctdb is already running.
   - Add a new tunable "VerifyRecoveryLock" that can be set to 0 to prevent the
     main ctdb daemon to verify that the recovery master has locked the reclock
     file correctly before allowing it to set the recovery mode to active.
   - fix a cosmetic bug with ctdb statistics where certain counters could become
     negative.


author: : Version 1.0.79
changelog:
  - From Mathieu Parent: add a ctdb pkgconfig file
   - Fix bug 6250
   - add a funciton remove_ip to safely remove an ip from an interface, taking
     care to workaround an issue with linux alias interfaces.
   - Update the natgw eventscript to use the safe remove_ip() function
   - fix a bug in the eventscript child process that would cause the socket to be
     removed.
   - dont verify nodemap on banned nodes during cluster monitoring
   - Update the dodgy SeqnumInterval to have ms resolution


author: : Version 1.0.78
changelog:
  - Add a notify mechanism so we can send snmptraps/email to external management
     systems when the node becomes unhealthy
   - include 11.natgw eventscript in thew install so that the NATGW feature works


author: : Version 1.0.77
changelog:
  - Update the 99.routing eventscript to also try to add the routes (back)
     during a releaseip event. Similar to the reasons why we must add addresses
     back during releaseip in 10.interfaces


author: : Version 1.0.76
changelog:
  - Add a debugging command "xpnn" which can print the pnn of the node even when
     ctdbd is not running.
   - Redo the NATGW implementation to allow multiple disjoing NATGW groups in the
     same cluster.


author: : Version 1.0.75
changelog:
  - Various updates to LVS
   - Fix a bug in the killtcp control where we did not set the port correctly
   - add a new "ctdb scriptstatus" command that shows the status of the
     eventrscripts.


author: : Version 1.0.74
changelog:
  - Fixes to AIX from C Cowan.
   - Fixes to ctdb_diagnostics so we collect correct GPFS data
   - Fixes to the net conf list command in ctdb_diagnostics
   - Check the static-routes file IFF it exists in ctdb_diagnostics


author: : Version 1.0.73
changelog:
  - Add possibility to disable the check of shares for NFS and Samba
   - From Sumit Bose, fix dependencies so make -j works


author: : Version 1.0.72
changelog:
  - Updates to test scripts by martin s
   - Adding a COPYING file
   - Use netstat to check for services and ports and fallback to netcat
     only if netstat is unavailable.


author: : Version 1.0.70
changelog:
  - IPv6 support is completed. this is backward compatible with ipv4-only
     systems. To use IPv6 with samba and ctdb you need current GIT of samba 3.3
     or michael adams samba-ctdeb branch.
   - Many enhancements to the build system and scripts to make it more SUSE
     friendly by Michael Adams.
   - Change of how the naming of the package is structured. We are now
     using "1.0.70" as a release and "-1" as the revision instead of as
     previously using "1.0" as release and ".70" as the revision.
     By Michael Adams.


author: : Version 1.0.69
changelog:
  - Various fixes to scripts by M Adam
   - Dont call ctdb_fatal() when the transport is down during shutdown


author: : Version 1.0.68
changelog:
  - Fixes for monitoring of interfaces status from Michael Adam.
   - Use -q instead of >/dev/null for grep to enhance readability of the
     scripts from Michael Adam.
   - Update to the "ctdb recover" command. This command now block until the
     has completed. This makes it much easier to use in scripts and avoids
     the common workaround :
        ctdb recover
        ... loop while waiting for recovery completes ...
        continue ...
   - Add a CTDB_TIMEOUT variable. If set, this variable provides an automatic
     timeout for "ctdb <command>", similar to using -T <timeout>
   - Set a unique errorcode for "ctdb <command>" when it terminates due to a
     timeout so that scripts can distinguish between a hung command and what was
     just a failure.
   - Update "ctdb ban/unban" so that if the cluster is in recovery these commands
     blocks and waits until after recovery is complete before the perform the
     ban/unban operation. This is necessary since the recovery process can cause
     nodes to become automatically unbanned.
   - Update "ctdb ban/unban" to block until the recovery that will follow shortly
     after this command has completed.
     This makes it much easier to use in scripts and avoids the common
     workaround :
        ctdb ban/unban
        ... loop while waiting for recovery completes ...
        continue ...
   - Bugfix for the new flags handling in 1.0.67. Abort and restart monitoring
     if we failed to get proper nodemaps from a remote node instead of
     dereferencing a null pointer.
   - If ctdbd was explicitely started with the '--socket' argument, make
     ctdbd automatically set CTDB_SOCKET to the specified argument.
     This ensures that eventscripts spawned by the ctdb daemon will default to
     using the same socket and talk to the correct daemon.
     This primarily affects running multiple daemons on the same host and where
     you want each instance of ctdb daemons have their eventscripts talk to the
     "correct" daemon.
   - Update "ctdb ping" to return an error code if the ping fail so that it
     can be used in scripts.
   - Update to how to synchronize management of node flags across the cluster.


author: : Version 1.0.67
changelog:
  - Add a document describing the recovery process.
   - Fix a bug in "ctdb setdebug" where it would refuse to set a negative
     debug level.
   - Print the list of literals for debug names if an invalid one was given
     to "ctdb setdebug"
   - Redesign how "ctdb reloadnodes" works and reduce the amont of tcp teardowns
     used during this event.
   - Make it possible to delete a public ip from all nodes at once using
     "ctdb delip -n all"


author: : Version 1.0.66
changelog:
  - Allow to change the recmaster even when we are not frozen.
   - Remove two redundant SAMBA_CHECK variables from the sysconf example
   - After a node failure it can take very long before some lock operations
     ctdb needs to perform are allowed/works with gpfs again. Workaround this
     by treating a hang/timeout as success.
   - Dont override CTDB_BASE is fet in the shell already
   - Always send keepalive packets regardless of whether the link is idle or not.
   - Rewrite the disable/enable flag update logic to prevent a race between
     "ctdb disable/enable" and the recovery daemon when updating the flags to
     all nodes.


author: : Version 1.0.65
changelog:
  - Update the sysconfig example: The default debug level is 2 (NOTICE) and not
     0 (ERROR)
   - Add support for a CTDB_SOCKET environment variable for the ctdb command
     line tool. If set, this overrides the default socket the ctdb tool will
     use.
   - Add logging of high latency operations.


author: : Version 1.0.64
changelog:
  - Add a context and a timed event so that once we have been in recovery for
     too long we drop all public addresses.


author: : Version 1.0.63
changelog:
  - Remove logging of "periodic cleanup ..." in 50.samba
   - When we reload a nodes file, we must detect this and reload the file also
     in the recovery daemon before we try to dereference somethoung beyond the end
     of the nodes array.


author: : Version 1.0.62
changelog:
  - Allow multiple eventscritps using the same prefix number.
     It is undefined which order scripts with the same prefix will execute in.


author: : Version 1.0.61
changelog:
  - Use "route add -net" instead of "ip route add" when adding routes in 99.routing
   - lower the loglevel os several debug statements
   - check the status returned from ctdb_ctrl_get_tickles() before we try to
     print them out to the screen.
   - install a new eventscript 20.multipathd whoich can be used to monitor that
     multipath devices are healthy


author: : Version 1.0.60
changelog:
  - Verify that nodes we try to ban/unban are reachable and print an error othervise.
   - Update the client and server sides of TAKEIP/RELEASEIP/GETPUBLICIPS and
     GETNODEMAP to fall back to the old style ipv4-only controls if the new
     ipv4/ipv6 controls fail. This allows an ipv4/v6 enabled ctdb daemon to
     interoperate with earlier ipv4-only versions of the daemons.
   - From Mathieu Parent : log debian systems log the package versions in ctdb
     diagnostics
   - From Mathieu Parent : specify logdir location for debian (this patch was
     later reversed)
   - From Michael Adams : allow # comments in nodes/public_addresses files


author: : Version 1.0.59
changelog:
  - Updated "reloadnodes" logic. Instead of bouncing the entire tcp layer it is
    sufficient to just close and reopen all outgoing tcp connections.
   - New eventscript 99.routing which can be used to re-attach routes to public
     interfaces after a takeip event. (routes may be deleted by the kernel when we
     release an ip)
   - IDR tree fix from Jim Houston
   - Better handling of critical events if the local clock is suddenly changed
     forward by a lot.
   - Fix three slow memory leaks in the recovery daemon
   - New ctdb command : ctdb recmaster   which prints the pnn of the recmaster
   - Onnode enhancements from Martin S : "healthy" and "connected" are now
     possible nodespecifiers
   - From Martin S : doc fixes
   - lowering some debug levels for some nonvital informational messages
   - Make the daemon daemon monitoring stronger and allow ctdbd to detect a hung
     recovery daemon.
   - From C Cowan : patches to compile ipv6 under AIX
   - zero out some structs to keep valgrind happy


author: : Version 1.0.58
changelog:
  - revert the name change tcp_tcp_client back to tcp_control_tcp so
     samba can build.
   - Updates to the init script from Abhijith Das <adas@redhat.com>


author: : Version 1.0.54
changelog:
  - fix a looping error in the transaction code
   - provide a more detailed error code for persistent store errors
     so clients can make more intelligent choices on how to try to recover


author: : Version 1.0.52
changelog:
  - Send an explicit gratious arp when starting sending the tcp tickles.
   - When doing failover, issue a killtcp to non-NFS/non-CIFS clients
     so that they fail quickly. NFS and CIFS already fail and recover
     quickly.
   - Update the test scripts to handle CTRL-C to kill off the test.


author: : Version 1.0.51
changelog:
  - Strip off the vlan tag from bond devices before we check in /proc
     if the interface is up or not.
   - Use testparm in the background in the scripts to allow probing
     that the shares do exist.
   - Fix a bug in the logging code to handle multiline entries better
   - Rename private elements from private to private_data


author: : Version 1.0.50
changelog:
  - Dont assume that just because we can establish a TCP connection
     that we are actually talking to a functioning ctdb daemon.
     So dont mark the node as CONNECTED just because the tcp handshake
     was successful.
   - Dont try to set the recmaster to ourself during elections for those
     cases we know this will fail. To remove some annoying benign but scary
     looking entries from the log.
   - Bugfix for eventsystem for signal handling that could cause a node to
     hang.


author: : Version 1.0.48
changelog:
  - Update the spec file.
   - Do not start new user-triggered eventscripts if we are already
     inside recovery mode.
   - Add two new controls to start/cancel a persistent update.
     A client such as samba can use these to tell ctdbd that it will soon
     be writing directly to the persistent database tdb file. So if
     samba is -9ed before it has eitehr done the persistent_store or
     canceled the operation, ctdb knows that the persistent databases
     'may' be out of sync and therefore a full blown recovery is called for.
   - Add two new options :
     CTDB_SAMBA_SKIP_CONF_CHECK and CTDB_SAMBA_CHECK_PORTS that can be used
     to override what checks to do when monitoring samba health.
     We can no longer use the smbstatus, net or testparm commands to check
     if samba or its config is healthy since these commands may block
     indefinitely and thus can not be used in scripts.


author: : Version 1.0.47
changelog:
  - Fix a double free bug where if a user striggered (ctdb eventscript)
     hung and while the timeout handler was being processed a new user
     triggered eventscript was started we would free state twice.
   - Rewrite of onnode and associated documentation.


author: : Version 1.0.46
changelog:
  - Document both the LVS:cingle-ip-address and the REMOTE-NODE:wan-accelerator
     capabilities.
   - Add commands "ctdb pnn", "ctdb lvs", "ctdb lvsmaster".
   - LVS improvements. LVS is the single-ip-address mode for a ctdb cluster.
   - Fixes to supress rpmlint warnings
   - AXI compile fixes.
   - Change \s to [[:space:]] in some scripts. Not all RHEL5 packages come
     with a egrep that handles \s   even same version but different arch.
   - Revert the change to NFS restart. CTDB should NOT attempt to restart
     failed services.
   - Rewrite of the waitpid() patch to use the eventsystem for handling
     signals.


author: : Version 1.0.45
changelog:
  - Try to restart the nfs service if it has failed to respond 3 times in a row.
   - waitpid() can block if the child does not respond promptly to SIGTERM.
     ignore all SIGCHILD signals by setting SIGCHLD to SIG_DEF.
     get rid of all calls to waitpid().
   - make handling of eventscripts hanging more liberal.
     only consider the script to have failed and making the node unhealthy
     IF the eventscript terminated wiht an error
     OR the eventscript hung 5 or more times in a row


author: : Version 1.0.44
changelog:
  - Add a CTDB_VALGRIND option to /etc/sysconfig/ctdb to make it start
     ctdb under valgrind. Logs go to /var/log/ctdb_valgrind.PID
   - Add a hack to show the control opcode that caused uninitialized data
     in the valgrind output by encoding the opcode as the line number.
   - Initialize structures and allocated memory in various places in
     ctdb to make it valgrind-clean and remove all valgrind errors/warnings.
   - If/when we destroy a lockwait child, also make sure we cancel any pending transactions
   - If a transaction_commit fails, delete/cancel any pending transactions and
     return an error instead of calling ctdb_fatal()
   - When running ctdb under valgrind, make sure we run it with --nosetsched and also
     ensure that we do not use mem-mapped i/o when accessing the tdb's.
   - zero out ctdb->freeze_handle when we free/destroy a freeze-child.
     This prevent a heap corruption/ctdb crash bug that could trigger
     if the freeze child times out.
   - we dont need to explicitely thaw the databases from the recovery daemon
     since this is done implicitely when we restore the recovery mode back to normal.
   - track when we start and stop a recovery. Add the 'time it took to complete the
     recovery' to the 'ctdb uptime' output.
     Ensure by tracking the start/stop recovery timestamps that we do not
     check that the ip allocation is consistend from inside the recovery daemon
     while a different node (recovery master) is performing a recovery.
     This prevent a race that could cause a full recovery to trigger if the
     'ctdb disable/enable' commands took very long.
   - The freeze child indicates to the master daemon that all databases are locked
     by writing data to the pipe shared with the master daemon.
     This write sometimes fail and thus the master daemon never notices that the databases
     are locked cvausing long timeouts and extra recoveries.
     Check that the write is successful and try the write again if it failed.
   - In each node, verify that the recmaster have the right node flags for us
     and force a push of our flags to the recmaster if wrong.


author: : Version 1.0.43
changelog:
  - Updates and bugfixes to the specfile to keep rpmlint happy
   - Force a global flags update after each recovery event.
   - Verify that the recmaster agrees with our node flags and update the
     recmaster othervise.
   - When writing back to the parent from a freeze-child across the pipe,
     loop over the write in case the write failed with an error  othervise
     the parent will never be notified tha the child has completed the operation.
   - Automatically thaw all databases when recmaster marks us as being in normal
     mode instead of recovery mode.


author: : Version 1.0.42
changelog:
  - When event scripts have hung/timedout more than EventScriptBanCount times
     in a row the node will ban itself.
   - Many updates to persistent write tests and the test scripts.


author: : Version 1.0.41
changelog:
  - Reactivate the safe writes to persistent databases and solve the
     locking issues. Locking issues are solved the only possible way,
     by using a child process to do the writes.  Expensive and slow but... .


author: : Version 1.0.40
changelog:
  - Read the samba sysconfig file from the 50.samba eventscript
   - Fix some emmory hierarchical bugs in the persistent write handling


author: : Version 1.0.39
changelog:
  - Moved a CTDB_MANAGES_NFS, CTDB_MANAGES_ISCSI and CTDB_MANAGES_CSFTPD
     into /etc/sysconfig/ctdb
   - Lowered some debug messages to not fill the logfile with entries
     that normally occur in the default configuration.


author: : Version 1.0.38
changelog:
  - Add machine readable output support to "ctdb getmonmode"
   - Lots of tweaks and enhancements if the event scripts are "slow"
   - Merge from tridge: an attempt to break the chicken-and-egg deadlock that
     net conf introduces if used from an eventscript.
   - Enhance tickles so we can tickle an ipv6 connection.
   - Start adding ipv6 support : create a new container to replace sockaddr_in.
   - Add a checksum routine for ipv6/tcp
   - When starting up ctdb, let the init script do a tdbdump on all
     persistent databases and verify that they are good (i.e. not corrupted).
   - Try to use "safe transactions" when writing to a persistent database
     that was opened with the TDB_NOSYNC flag. If we can get the transaction
     thats great, if we cant  we have to write anyway since we cant block here.


author: : Version 1.0.37
changelog:
  - When we shutdown ctdb we close the transport down before we run the
     "shutdown" eventscripts. If ctdb decides to send a packet to a remote node
     after we have shutdown the transport but before we have shutdown ctdbd
     itself this could lead to a SEGV instead of a clean shutdown. Fix.
   - When using the "exportfs" command to extract which NFS export directories
     to monitor,  exportfs violates the "principle of least surprise" and
     sometimes report a single export line as two lines of text output
     causing the monitoring to fail.


author: : Version 1.0.36
changelog:
  - fix a memory corruption bug that could cause the recovery daemon to crash.
   - fix a bug with distributing public ip addresses during recovery.
     If the node that is the recovery master did NOT use public addresses,
     then it assumed that no other node in the cluster used them either and
     thus skipped the entire step of reallocating public addresses.


author: : Version 1.0.35
changelog:
  - During recovery, when we define the new set of lmasters (vnnmap)
     only consider those nodes that have the can-be-lmaster capability
     when we create the vnnmap. unless there are no nodes available which
     supports this capability in which case we allow the recmaster to
     become lmaster capable (temporarily).
   - Extend the async framework so that we can use paralell async calls
     to controls that return data.
   - If we do not have the "can be recmaster" capability, make sure we will
     lose any recmaster elections, unless there are no nodes available that
     have the capability, in which case we "take/win" the election anyway.
   - Close and reopen the reclock pnn file at regular intervals.
     Make it a non-fatal event if we occasionally fail to open/read/write
     to this file.
   - Monitor that the recovery daemon is still running from the main ctdb
     daemon and shutdown the main daemon when recovery daemon has terminated.
   - Add a "ctdb getcapabilities" command to read the capabilities off a node.
   - Define two new capabilities : can be recmaster and can be lmaster
     and default both capabilities to YES.
   - Log denied tcp connection attempts with DEBUG_ERR and not DEBUG_WARNING


author: : Version 1.0.34
changelog:
  - When deleting a public ip from a node, try to migrate the ip to a different
     node first.
   - Change catdb to produce output similar to tdbdump
   - When adding a new public ip address, if this ip does not exist yet in
     the cluster, then grab the ip on the local node and activate it.
   - When a node disagrees with the recmaster on WHO is the recmaster, then
     mark that node as a recovery culprit so it will eventually become
     banned.
   - Make ctdb eventscript support the -n all argument.


author: : Version 1.0.33
changelog:
  - Add facilities to include site local adaptations to the eventscript
     by /etc/ctdb/rc.local which will be read by all eventscripts.
   - Add a "ctdb version" command.
   - Secure the domain socket with proper permissions from Chris Cowan
   - Bugfixes for AIX from Chris Cowan


author: : Version 1.0.32
changelog:
  - Add a control to have a node execute the eventscripts with arbitrary
     command line arguments.
   - Add a control "rddumpmemory" that will dump the talloc memory allocations
     for the recovery daemon.
   - Decorate the talloc memdump to produce better and easier memory leak
     tracking.
   - Update the RHEL5 iscsi tgtd scripts to allow one iscsi target for each
     public address.
   - Add two new controls "addip/delip" that can be used to add/remove public
     addresses to a node at runtime. After using these controls a "ctdb recover"
     ir required to make the changes take.
   - Fix a couple of slow memory leaks.


author: : Version 1.0.31
changelog:
  - Add back controls to disable/enable monitoring on a node.
   - Fix a memory leak where we used to attach CALL data to the ctdb structure
     when performing a local call. Memory which would be lost if the call was
     aborted.
   - Reduce the loglevel for the log output when someone connects to a non
     public ip address for samba.
   - Redo and optimize the vacuuming process to send only one control to each
     other node containing all records to be vacuumed instead of one
     control per node per record.


author: : Version 1.0.30
changelog:
  - Update documentation cor new commands and tuneables
   - Add machinereadable output to the ip,uptime and getdebug commands
   - Add a moveip command to manually failover/failback public ips
   - Add NoIPFallback tuneable that prevents ip address failback
   - Use file locking inside the CFS as alternative to verify when other nodes
     Are connected/disconnected to be able to recover from split network
   - Add DisableWhenUnhealthy tunable
   - Add CTDB_START_AS_DISABLED sysconfig param
   - Add --start-as-disabled flag to ctdb
   - Add ability to monitor for OOM condition


author: : Version 1.0.29
changelog:
  - Add a new command to make expansion of an existing cluster easier
   - Fix bug with references to freed objects in the ctdb structure
   - Propagate debuglevel changes to the recovery daemon
   - Merge patches to event scripts from Mathieu Parent :
   - MP: Simulate "service" on systems which do not provide this tool
   - MP: Set correct permissions for events.d/README
   - Add nice helper functions to start/stop nfs from the event scripts


author: : Version 1.0.28
changelog:
  - Fix a problem where we tried to use ethtool on non-ethernet interfaces
   - Warn if the ipvsadm packege is missing when LVS is used
   - Dont use absolute pathnames in some of the event scripts
   - Fix for persistent tdbs growing inifinitely.


author: : Version 1.0.25
changelog:
  - added async recovery code
   - make event scripts more portable
   - fixed ctdb dumpmemory
   - more efficient tdb allocation code
   - improved machine readable ctdb status output
   - added ctdb uptime


author: : Version 1.0.23
changelog:
  - fixed a memory leak in the recoveryd
   - fixed a corruption bug in the new transaction code
   - fixed a case where an packet for a disconnected client could be processed
   - added http event script
   - updated documentation


author: : Version 1.0.19
changelog:
  - fixed non-master bug
   - big speedup in recovery for large databases
   - lots of changes to improve tdb and ctdb for high churn databases


author: : Version 1.0.17
changelog:
  - fixed bugs related to ban/unban of nodes
   - fixed a race condition that could lead to monitoring being permanently disabled,
     which would lead to long recovery times
   - make deterministic IPs the default
   - fixed a bug related to continuous recovery
   - added a debugging option --node-ip


author: Joel Granados <jgranado@redhat.com> - 1.8.1-23
changelog:
  - Prevent the user from creating msdos partitions on devices that have
    more than 2^32 sectors.
    Resolves: rhbz:447768


author: Joel Granados <jgranado@redhat.com> - 1.8.1-18
changelog:
  - Add a comment about the way the arguments should be written when using
    the '-' in the UNIT subargument. 
    Related: rhbz#450298
  - Add a 2T limit to msdos partitions.
    Related: rhbz#447768
  - Have parted return correct error codes when something goes wrong
    Related: rhbz#447792
  - Reload logical partitions correctly
    Related: rhbz#441244
  - Don't ask the user anything when in scripting mode.
    Related: rhbz#448165


author: David Cantrell <dcantrell@redhat.com> - 1.8.1-14
changelog:
  - Fix parted print command crashing with Xen xvd disks
    Resolves: rhbz#366971
  - Disable disk loss warnings in script mode (-s)
    Resolves: rhbz#244668
  - Decrement exception counter correctly in the mkpart command
    Related: rhbz#244668
  - Fix block number used when checking state on ext2 filesystems
    Related: rhbz#244668
  - Enable experimental ext2 resize support with warning
    Related: rhbz#244668


author: David Cantrell <dcantrell@redhat.com> - 1.8.1-13
changelog:
  - Modify parted man page to indicate which flags are valid for which
    disk labels
    Resolves: rhbz#242771
  - Add KNOWN ISSUES section to parted(8) man page explaining that we cannot
    currently do ext3 resizing inside parted
    Resolves: rhbz#367101


author: David Cantrell <dcantrell@redhat.com> - 1.8.1-11
changelog:
  - Do not crash when trying to detect a disk label on /dev/md* devices on s390x
    Related: rhbz#227324


author: David Cantrell <dcantrell@redhat.com> - 1.8.1-7
changelog:
  - Correct comment at the top of the notransname patch so it is not
    interpreted as a bzip file
    Related: rhbz#227324
  - Detect Xen virtual block devices and set model name appropriately
    Related: rhbz#235054


author: David Cantrell <dcantrell@redhat.com> - 1.8.1-6
changelog:
  - Handle Windows Vista starting primary partition cylinder alignment at
    sector 2048 rather than 63
  - Resolves: rhbz#226786
  - Do not translate partition names as read from the disk label
  - Resolves: rhbz#227324


author: David Cantrell <dcantrell@redhat.com> - 1.7.1-17
changelog:
  - For init_generic() failures on user-mode Linux block devices, goto
    error_free_arch_specific instead of error_free_dev.


author: David Cantrell <dcantrell@redhat.com> - 1.7.1-16
changelog:
  - Don't throw PED_EXCEPTION_ERROR in ped_geometry_read() if accessing
    sectors outside of partition boundary, since returning false will
    shift ped_geometry_check() to the correct sectors.


author: David Cantrell <dcantrell@redhat.com> - 1.7.1-14
changelog:
  - Improve error message returned by _parse_header() on GPT-labeled disks
    so users actually have an idea of how to correct the problem
  - Fix off-by-one error with LastUsableLBA and PartitionEntryLBA overlap
    to prevent possible data corruption when using non-parted GPT editing
    tools


author: Peter Jones <pjones@redhat.com> - 1.7.1-13
changelog:
  - Don't use the "volume name" as the device node name on dm device
    partitions, it isn't really what we want at all.


author: David Cantrell <dcantrell@redhat.com> - 1.7.1-12
changelog:
  - Updated O_DIRECT patch to work around s390 problems
  - Update LastUsableLBA on GPT-labeled disks after LUN resize (#194238)
  - Fix exception when backup GPT table is not in the correction location
    and parted tries to move it (#194238)


author: David Cantrell <dcantrell@redhat.com> - 1.7.1-11
changelog:
  - Expand error buffer to 8192 bytes in vtoc_error()
  - Do not apply O_DIRECT patch on S/390 or S/390x platforms


author: Chris Lumens <clumens@redhat.com> 1.6.23-1
changelog:
  - Updated to 1.6.23.
  - Get rid of separate Mac patches that are now included in upstream.
  - Update DASD and AIX patches.


author: Chris Lumens <clumens@redhat.com> 1.6.22-3
changelog:
  - Modified Apple_Free patch to take care of the case where the partitions
    are unnamed, causing many errors to be printed (#159047).


author: Chris Lumens <clumens@redhat.com> 1.6.22-1
changelog:
  - Updated to 1.6.22.
  - Get rid of separate gc4 patch that's now included upstream.
  - Take Mac LVM patch from parted CVS.


author: Jeremy Katz <katzj@redhat.com> - 1.6.16-2
changelog:
  - add patch from Matt Domsch to fix consistency of GPT disk labels 
    with the EFI specification for disks > 2TB (#138480)
  - understand the new Sun UFS partition ID
  - merge the new geometry probing from CVS to see if that helps the 
    assertions people are seeing (#138419)


author: Jeremy Katz <katzj@redhat.com> - 1.6.15-5
changelog:
  - add patch from Matt Domsch to add a unique signature to new DOS labels 
    so that we can later determine which BIOS disk is which (#106674)


author: Phil Knirsch <pknirsch@redhat.com> 1.6.15-4
changelog:
  - Fixed dasd patch (had some duplicate file patches in it)
  - Fixed problem with parted segfaulting on SCSI discs on s390 (#133997)


author: Jeremy Katz <katzj@redhat.com> - 1.6.12-2
changelog:
  - fix assertion error when checking flags on non-active partition (#130692)
  - buildrequires: gettext-devel


author: Jeremy Katz <katzj@redhat.com> - 1.6.12-1
changelog:
  - update to 1.6.12 with major changes to CHS handling to hopefully fix #115980
  - adjust dasd patch accordingly, drop some included patches


author: Jeremy Katz <katzj@redhat.com> - 1.6.9-4
changelog:
  - add patch from Matt Domsch to not use the get/set last sector ioctls 
    with a 2.6 kernel (#121455)


author: Jeremy Katz <katzj@redhat.com> - 1.6.9-1
changelog:
  - update to 1.6.9
  - need automake17
  - python-devel is superfluous with pyparted as a separate package
  - lose the fake-libtool stuff, 1.6.9 was disted with newer auto*


author: Jeremy Katz <katzj@redhat.com> - 1.6.6-1
changelog:
  - update to 1.6.6 
  - split dasd into a patch instead of included in the tarball
  - python module is now in the pyparted package (separate src.rpm)
  - ExcludeArch: ppc64 (#118183)


author: Jeremy Katz <katzj@redhat.com> 1.6.3-33
changelog:
  - 2.6 removes the geometry fixups that used to be present for IDE disks.  
    According to Andries, just follow what's in the partition table and don't 
    worry about what Linux "detects"


author: Matt Wilson <msw@redhat.com> 1.6.3-20
changelog:
  - don't detect AIX physical volumes as msdos partition tables (#91748)
  - added stubbed code for manipulating AIX PVs, enough to clobber the
    signature. (#91748)


author: Matt Wilson <msw@redhat.com> 1.6.3-18
changelog:
  - use metadata partitions to protect DASD VTOC
  - stash DASD specific data in disk specific areas, not arch specific
    areas.


author: Karsten Hopp <karsten@redhat.de> 1.6.3-11
changelog:
  - use different define to enable DASD debugging
    Otherwise we'll get a lot of dasd debug output because DEBUG is
    always defined


author: Jeremy Katz <katzj@redhat.com> 1.4.24-7
changelog:
  - use make LIBTOOL=/usr/bin/libtool instead of recreating everything
  - add patch from Jack Howarth <howarth@bromo.med.uc.edu> to self host properly
  - add patch to treat GPT structs as little-endian always and treat GUIDS 
    as little-endian blobs
  - add patch to recognize hp service partitions


author: Jeremy Katz <katzj@redhat.com> 1.4.24-6hammer
changelog:
  - libtoolize, etc for x86_64
  - hack to get the python module in the right place until python.m4 
    from automake is fixed


author: Matt Wilson <msw@redhat.com> 1.4.20-0.1pre3
changelog:
  - new dist from CVS with new autoconf and automake
  - gpt is in 1.4.20, removed patch1 (gpt support)
  - partstatic is in 1.4.20, removed patch2 (partstatic patch)


author: Matt Wilson <msw@redhat.com> 1.4.16-8
changelog:
  - new dist from cvs with changes to the python binding: register
    DEVICE_I20 and DEVICE_ATARAID, check to make sure that a partition
    exists in the PedDisk when using it to find ped_disk_next_partition


author: Matt Wilson <msw@redhat.com> 1.4.16-6
changelog:
  - added a patch (Patch1) to link the c library in dynamically, the
    rest of the libs statically for the parted binary (MF #49358)


author: Matt Wilson <msw@redhat.com>
changelog:
  - made a new dist from CVS that includes binding for
    disk.get_partition_by_sector and accessing the name of a disk type


author: Matt Wilson <msw@redhat.com>
changelog:
  - 1.4.16
  - regenerated gpt patch against 1.4.16, incorporated
    parted-1.4.15-pre1-gpt-printf.patch into the same patch, removed Patch1


author: Matt Wilson <msw@redhat.com>
changelog:
  - added a new dist tarball that contains a check in python code to
    make sure that a partition exists within a disk before trying to
    remove it from the disk
  - also changed _probe_with_open to make the first probed filesystem win


author: Matt Wilson <msw@redhat.com>
changelog:
  - added another fix for ext2/ext3
  - added Patch4 to move the crc32 function into its own namespace so
    we don't colide with zlib when both are in the same executable space


author: Matt Wilson <msw@redhat.com>
changelog:
  - include python binding
  - enable shared library (for python binding, we want fpic code)
    with --enable-shared
  - build parted binary static with --enable-all-static
  - don't run libtoolize on this.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 1.4.11
  - add EFI GPT patch from Matt Domsch (<Matt_Domsch@dell.com>)
  - don't run autoconf, it relies on a newer non-released version
    of autoconf...


author: Daniel Reed <djr@redhat.com> 1.6.5-4
changelog:
  - comment out call to autoconf, use 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=i686-redhat-linux-gnu --host=i686-redhat-linux-gnu \
  	--target=i386-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info instead of ./configure


author: Mike A. Harris <mharris@redhat.com> 1.3.1.4-1
changelog:
  - Updated xorg-x11-drv-siliconmotion to version 1.3.1.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.3.1-1
changelog:
  - Update BuildRoot to use Fedora Packaging Guidelines.
  - Deglob file manifest.
  - Limit "ExclusiveArch" to x86, x86_64


author: Mike A. Harris <mharris@redhat.com> 1.3.1-0
changelog:
  - Initial spec file for siliconmotion video driver generated automatically
    by my xorg-driverspecgen script.


author: Joe Orton <jorton@redhat.com> 2.01_10-29
changelog:
  - run with -Q from cron (#120913)
  - remove ancient trigger and post scriptlets
  - only read webalizer.conf from $PWD if owner matches user (#158174)


author: Alan Cox <alan@redhat.com>
changelog:
  - Added IPv6 patch from PLD c/o Robert Scheck
  - Added tests to trap bogus logfiles with negative times/dates
  - Fixed leap seconds


author: Joe Orton <jorton@redhat.com> 2.01_10-15.ent
changelog:
  - support large (>2gb) log files on 32-bit platforms
  - move default output directory to /var/www/usage
  - add conf.d/webalizer.conf to add alias for /usage
  - only allow access to usage stats from localhost by default
  - change default config: don't ignore out-of-sequence log entries,
    count .php and .shtml as "page" extensions.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - put transient files in /var/lib/webalizer
  - removed sysconfig runtime option.  Remove the package or cron script if 
    you do not want it to run (#59752)
  - make default quiet operation


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - rebuild for 7.0
  - changed mandir
  - changed graph output to png instead of gif
  - changed path to apache root (/var/www)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - remove bogus requirement on python-%{pythonver}, there's no such
    thing as a python-1.5 package and we actually use version 1.5.2
    Than: I take this VERY seriously... "It compiles, therefore it
    works!" is a registered trademark of myself. ;)
  - some fixes to spec file
  - update URL


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 0.10.1
  - Qt 1.45
  - handle RPM_OPT_FLAGS
  - fix download URL
  - -devel and -examples require base package


author: Mike A. Harris <mharris@redhat.com> 1.0.1-2
changelog:
  - Added "Requires: xorg-x11-proto-devel"
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libICE to version 0.99.2 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Updated libICE to version 0.99.1 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-24
changelog:
  - Fix bz493662 (RFE: Separate the Oracle 10g Failover Instance in Conga to two resources called "Oracle Instance" and "Oracle Listener")


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-19
changelog:
  - Fix bz602362 (ricci and luci_admin do not have man pages)
  - Fix bz636554 (Support ext4 and xfs file systems in conga for file system agents)
  - Fix bz637216 (Add luci support for fence_ifmib fencing agent)
  - Fix bz579859 (Add luci support for Cisco UCS fencing agent)
  - Fix bz637259 (RFE: Critical/Non-Critical services & resources luci support)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-18
changelog:
  - Fix bz626817 (Add luci support for Cisco MDS fencing agent)
  - Fix bz628102 (Add luci support for iLO MP fencing agent)
  - Fix bz525802 (Add support for configuring broadcast)
  - Modify fix for bz606509 (luci requires wrongly requires users to fill interval / minimum score / votes fields for qdisk configuration)
  - Modify fix for bz501780 (Luci invalidates some "system hostnames" that are valid)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-16
changelog:
  - Fix bz513004 (Conga does not remember SAP database type in IE6/8 from shared resource)
  - Fix bz533246 (Conga does not write "auth" or "password" when creating IPMI LAN fence device)
  - Fix bz555862 (Luci does not have an option to delete failover domain)
  - Fix bz577913 (Fence_drac5 will not popluate the luci interface correctly when adding fence device to node)
  - Fix bz582348 (Remove the "interface" field from the multicast configuration dialog)
  - Fix bz584633 (Add support for power_wait)
  - Fix bz587399 (Clarification on "type" when configuring oracledb resources)
  - Fix bz590143 (chkconfig on cman and rgmanager by default when adding a cluster node via conga)
  - Fix bz590311 (luci vmware fencing gui and fence_vmware script parameter conflict)
  - Fix bz603114 (Can't create KVM guest resources without a path to the XML file)
  - Fix bz606509 (luci requires wrongly requires users to fill interval / minimum score / votes fields for qdisk configuration)
  - Fix bz612300 (conga will fail to start a new node that is added via luci)


author: Chris Feist <cfeist@redhat.com> 0.12.2-14
changelog:
  - An issue with calling 'virsh nodelist' would cause ricci to hang for
    30 seconds during most requests resulting in timeouts to the web interface.
  - Resolves: rhbz#564490


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-7
changelog:
  - Fix bz501780 (Luci invalidates some "system hostnames" that are valid)
  - Fix bz514051 (fs resource will remount itself if any config changes are made to cluster.conf)
  - Fix bz517114 (Conga should not tag clusternodes with multicast tags)
  - Fix bz519050 (Luci does not validate passwords and incorrect characters can be used)
  - Fix bz521884 (Fix instances of #!/usr/bin/env python in luci)
  - Fix bz530129 (conga does not properly handle HA LVM types)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-6.1
changelog:
  - Fix bz519252: run the 'virsh' command with --readonly to cope with new
    virsh/xen behavior introduced in RHEL 5.4.


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-6
changelog:
  - Fix bz469965 (Adding existing fence device fails)
  - Fix bz499741 (updating qdisk partition global settings wipes out heuristics)
  - Fix bz495109 (Need xen/kvm flag for conga UI)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-5
changelog:
  - Fix bz492392 (Conga Interface for Fence Agents Requires Password even when Password Script is Specified)
  - Fix bz491903 ([RFE] add option 'nfslock' to conga)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-4
changelog:
  - Rework fix for bz483775 (Failover Domains can't be set for VMs as services of cluster suite using Conga)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.2-1
changelog:
  - Fix bz452704 (Unable to add existing RHEL4 clusters with RHEL5.2 Luci)
  - Fix bz467464 (adding qdisk to existing cluster fails to update cman entry in cluster.conf)
  - Fix bz460038 (Conga fs resource error when editing service)
  - Fix bz483067 (adding resource in conga doesn't work in IE)
  - Fix bz483775 (Failover Domains can't be set for VMs as services of cluster suite using Conga)
  - Fix bz450007 (cannot remove shared fence device through luci)
  - Fix bz466013 (Add luci GUI support for LPAR and vmware fencing)
  - Fix bz459160 (fenced config option to skip nodes with undefined fencing)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.1-4
changelog:
  - Fix bz459562 (charset configuration fix for luci)
  - Fix bz459469 (An unknown device type was given: "gnbd.")
  - Fix bz454933 (Add Support in Conga for Xen migration mapping)
  - Fix bz459623 (Conga error adding new node to existing cluster)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.1-1
changelog:
  - Fix bz444938 (conga fails to create proper cluster.conf entries for gfs2 filesystem type)
  - Fix bz444210 (Adding multiple fence devices at the same time causes duplicate entries)
  - Fix bz444381 (conga writes 'exportpath' instead of 'export' attribute for netfs)
  - Fix bz446907 (rpm -V luci fails)
  - Fix bz450854 (luci doesn't start because of a missing dep /usr/bin/dc)
  - Fix bz206570 (RFE: vm list from ricci)
  - Fix bz430737 (Conga should install the 'cmirror' package when clustered storage is requested)
  - Fix bz379461 (Conga doesn't have the option for modulename for drac fencing)
  - Fix bz433089 (when adding multiple nodes the order is reversed.)
  - Fix bz441581 (Don't allow both label and device for qdisk config if only one can be specified)
  - Fix bz223785 (Storage 'Display Devices by' option does not work)
  - Fix bz250439 (conga is unable to delete snapshot volumes)
  - Fix bz414551 (Sector size list is improperly sorted)
  - Fix bz429350 (RFE: GUI support for failing over a service to another node after X number of restarts)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.0-8
changelog:
  - Fix bz441580 (conga should install 'sg3_utils' and start service 'scsi_reserve' when scsi fencing is used)
  - Fix bz441573 ("nodename" field for fence_scsi disabled when adding a new fence device/instance)
  - Fix bz442997 (Luci inserts "hostname" instead of "ipaddr" for rsa II fencing device)
  - Fix bz442806 (luci shows wrong state for 'Monitor link' checkbox in IP resource)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.0-6
changelog:
  - Fix bz434586 (Resource tree does not display multiple children of a parent correctly)
  - Fix bz304931 (Rich Sybase resource agent configuration support)
  - Fix bz437398 (When Luci session times out a re-login is thought to be a logout.)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.0-4
changelog:
  - Fix bz429151 ([RFE] Luci: increase min password length to 6 characters)
  - Fix bz429152 ([RFE] add inactivity timeout)


author: Ryan McCabe <rmccabe@redhat.com> 0.12.0-0
changelog:
  - Fixed bz230462 (RFE: Only reboot installation target machines when needed)
  - Fixed bz238655 (conga does not set the "nodename" attribute for manual fencing)
  - Fixed bz239387 (RFE: add timeouts for actions that can leave cluster unreachable)
  - Fixed bz249097 (allow a space as a valid password char)
  - Fixed bz249619 (luci "Manage Systems and Clusters" display of clusters and storage systems is cascaded)
  - Fixed bz252348 (RFE: should only have to enter a system's password once)
  - Fixed bz253223 (When deleting a node from conga, the fence device isn't deleted)
  - Fixed bz253720 ("trust" box shouldn't be an option if it is required)
  - Fixed bz253727 (RFE: graphical view should be default in partiton tables view)
  - Fixed bz253842 (luci ignores File System Resource Configuration)
  - Fixed bz253879 (RFE: drop the link/details column in the resource section table)
  - Fixed bz264161 (RFE: support setting the "__independent_subtree" attribute on cluster resources)
  - Fixed bz277661 (RFE: Better instructions on the luci login page if luci_admin not run.)
  - Fixed bz277711 (RFE: luci_admin should check that luci is running before asking for the password)
  - Fixed bz295771 (RFE: add ability to set self_fence attribute for clusterfs resources)
  - Fixed bz301411 (conga shouldn't turn on init scripts if the user turned them off)
  - Fixed bz303661 (Browser support to encompass Internet Explorer on Windows Vista and XP)
  - Fixed bz304891 (Browser support to encompass Firefox on Windows Vista and XP.)
  - Fixed bz315631 (conga doesn't handle the cluster restart operation properly)
  - Fixed bz317261 (Check for dual power fencing fails when adding new fence instances)
  - Fixed bz320411 (conga should use the node name in cluster.conf and not FQDN for fencing)
  - Fixed bz337041 (Add option to not fail-back service)
  - Fixed bz340111 (Storage redirection after probe does not work on WinXP with FF2)
  - Fixed bz379461 (Conga doesn't have the option for modulename for drac fencing)
  - Fixed bz383071 (Virtual machine configuration - add field for "migration type" xml attr = "migrate")


author: Ryan McCabe <rmccabe@redhat.com> 0.10.0-6
changelog:
  - Fixed bz253783
  - Fixed bz253914 (conga doesn't allow you to reuse nfs export and nfs client resources)
  - Fixed bz254038 (Impossible to set many valid quorum disk configurations via conga)
  - Fixed bz253994 (Cannot specify multicast address for a cluster)
  - Resolves: bz253783, bz253914, bz254038, bz253994


author: Ryan McCabe <rmccabe@redhat.com> 0.10.0-5
changelog:
  - Fixed bz249291 (delete node task fails to do all items listed in the help document)
  - Fixed bz253341 (failure to start cluster service which had been modifed for correction)
  - Related: bz253341
  - Resolves: bz249291


author: Ryan McCabe <rmccabe@redhat.com> 0.10.0-4
changelog:
  - Fixed bz230451 (fence_xvm.key file is not automatically created. Should have a least a default)
  - Fixed bz249097 (allow a space as a valid password char)
  - Fixed bz250834 (ZeroDivisionError when attempting to click an empty lvm volume group)
  - Fixed bz250443 (storage name warning utility produces a storm of warnings which can lock your browser)
  - Resolves: bz249097, bz250443, bz250834
  - Related: bz230451


author: Ryan McCabe <rmccabe@redhat.com> 0.10.0-3
changelog:
  - Fixed bz245947 (luci/Conga cluster configuration tool not initializing cluster node members)
  - Fixed bz249641 (conga is unable to do storage operations if there is an lvm snapshot present)
  - Fixed bz249342 (unknown ricci error when adding new node to cluster)
  - Fixed bz249291 (delete node task fails to do all items listed in the help document)
  - Fixed bz249091 (RFE: tell user they are about to kill all their nodes)
  - Fixed bz249066 (AttributeError when attempting to configure a fence device)
  - Fixed bz249086 (Unable to add a new fence device to cluster)
  - Fixed bz249868 (Use of failover domain not correctly shown)
  - Resolves bz245947, bz249641, bz249342, bz249291, bz249091,
  - Resolves bz249066, bz249086, bz249868
  - Related: bz249351


author: Ryan McCabe <rmccabe@redhat.com> 0.10.0-2
changelog:
  - Fixed bz245202 (Conga needs to support Internet Explorer 6.0 and later)
  - Fixed bz248317 (luci sets incorrect permissions on /usr/lib64/luci and /var/lib/luci) 
  - Resolves: bz245202 bz248317


author: Ryan McCabe <rmccabe@redhat.com> 0.10.0-1
changelog:
  - Fixed bz238655 (conga does not set the "nodename" attribute for manual fencing)
  - Fixed bz221899 (Node log displayed in partially random order)
  - Fixed bz225782 (Need more luci service information on startup - no info written to log about failed start cause)
  - Fixed bz227743 (Intermittent/recurring problem - when cluster is deleted, sometimes a node is not affected)
  - Fixed bz227682 (saslauthd[2274]: Deprecated pam_stack module called from service "ricci")
  - Fixed bz238726 (Conga provides no way to remove a dead node from a cluster)
  - Fixed bz239389 (conga cluster: make 'enable shared storage' the default)
  - Fixed bz239596
  - Fixed bz240034 (rpm verify fails on luci)
  - Fixed bz240361 (Conga storage UI front-end is too slow rendering storage)
  - Fixed bz241415 (Installation using Conga shows "error" in message during reboot cycle.)
  - Fixed bz241418 (Conga tries to configurage cluster snaps, though they are not available.)
  - Fixed bz241706 (Eliminate confusion in add fence flow)
  - Fixed bz241727 (can't set user permissions in luci)
  - Fixed bz242668 (luci init script can return non-LSB-compliant return codes)
  - Fixed bz243701 (ricci init script can exit with non-LSB-compliant return codes)
  - Fixed bz244146 (Add port number to message when ricci is not started/firewalled on cluster nodes.)
  - Fixed bz244878 (Successful login results in an infinite redirection loop with MSIE)
  - Fixed bz239388 (conga storage: default VG creation should be clustered if a cluster node)
  - Fixed bz239327 (Online User Manual needs modification)
  - Fixed bz227852 (Lack of debugging information in logs - support issue)
  - Fixed bz245025 (Conga does not accept '&amp;' character in password field for Fence configuration)
  - Fixed bz225588 (luci web app does not enforce selection of fence port)
  - Fixed bz212022 (cannot create cluster using ip addresses)
  - Fixed bz223162 (Error trying to create a new fence device for a cluster node)
  - Upgraded to the latest Plone (2.5.3)
  - Added a "reprobe storage" button that invalidates cached storage reports
    and forces a new probe.
  - Resolves: bz238655, bz221899, bz225782, bz227682, bz227743, bz239389,
  - Resolves: bz239596, bz240034, bz240361, bz241415, bz241418, bz241706,
  - Resolves: bz241727, bz242668, bz243701, bz244146, bz244878, bz238726,
  - Resolves: bz239388, bz239327, bz227852, bz245025, bz225588, bz212022


author: Ryan McCabe <rmccabe@redhat.com> 0.9.2-5
changelog:
  - Fixed bz225206 (Cluster cannot be deleted (from 'Manage Systems') - but no error results)
  - Fixed bz225164 (Conga allows creation/rename of clusters with name greater than 15 characters)
  - Fixed bz227758 (Entering bad password when creating a new cluster = UnboundLocalError: local variable 'e' referenced before assignment)
  - Resolves: bz225206, bz225164, bz227758


author: Stanko Kupcevic <kupcevic@redhat.com> 0.9.2-4
changelog:
  - Do not fail on i18n machines
  - Fixed bz225747 (Create/delete cluster - then access disk on node = Generic error on host: cluster tools: cman_tool errored)
  - Fixed bz233326 (CVE-2007-0240 Conga includes version of Zope that is vulnerable to a XSS attack)
  - Fixed bz228637 (CVE-2007-1462 security alert - passwords sent back from server as input value)
  - Fixed bz229027 (luci failover domain forms are missing/empty)
  - Fixed bz230447 (fence_xvm is incorrectly listed as "xmv" in virtual cluster)
  - Fixed bz230452 (Advanced options parameters settings don't do anything)
  - Fixed bz230454 (Unable to configure a virtual service)
  - Fixed bz230457 (kmod-gfs-xen not installed with Conga install)
  - Fixed bz230461 ('enable shared storage' option cleared whenever there is a configuration error)
  - Fixed bz230469 (Must manually edit cluster.conf on the dom0 cluster to add "<fence_xvmd/>")
  - Resolves: bz229027, bz230447, bz230452, bz230454, bz230457,
  - Resolves: bz230461, bz230469, bz228637, bz233326, bz225747


author: Stanko Kupcevic <kupcevic@redhat.com> 0.8-27
changelog:
  - Fixed bz214989 (Package download not working for Conga during cluster creation)
  - Fixed bz219522 (Restarting a cluster via luci web gui = UnboundLocalError - local variable 'e' referenced before assignment)
  - Fixed bz201394 (luci doesn't verify ricci's SSL cert against trusted list)
  - Fixed bz212021 (various luci buttons do nothing)
  - Fixed bz212448 (release blocker: turn off debug mode of server)
  - Fixed bz212445 (release blocker: prevent management page access)


author: Stanko Kupcevic <kupcevic@redhat.com> 0.8-26
changelog:
  - luci storage: fix bytes->TB conversion
  - Improved bz201394: luci doesn't verify ricci's SSL cert against trusted list (step 1 - backend)
  - Fixed bz217387 (luci - HTML error shows up in display (minor))
  - Fixed bz215031 (Cannot add a resource to a service via luci web app)
  - Fixed bz218040 (luci reports "unknown" as cluster name if cluster creation fails)
  - Fixed bz218941 (Conga/luci - cannot add node to cluster via luci web app)
  - Fixed bz219156 (Errors in performing node-specific tasks due to ricci outage not reflected in luci display)
  - Fixed bz217703 (clustered vg creation fails)
  - Resolves: bz217387, bz215031, bz218040, bz218941, bz219156, bz217703
  - Related: bz201394


author: Stanko Kupcevic <kupcevic@redhat.com> 0.8-24
changelog:
  - Fixed bz215039 (Cannot create a new resource via luci web app)
  - Fixed bz215034 (Cannot change daemon properties via luci web app)
  - Fixed bz214790 (Stop/restart cluster not working via luci web app)
  - Fixed bz213690 (luci - Reversed links in colophon (gui - minor))
  - Fixed bz213266 (Conga - modifying a cluster node's cluster membership in a subnet with other clusters results in the wrong cluster.conf)
  - Fixed bz213083 (luci - should display usernames in some logical/sorted order (usability))
  - Fixed bz212601 (luci - selecting cluster name or cluster node name indicates error in install and displays empty form)
  - Fixed bz212021 (various luci buttons do nothing)
  - Fixed bz212006 (create cluster does not show status as cluster is being created)
  - Fixed bz212584 (luci does not retrieve failed ricci queue elements)
  - Fixed bz212440 (luci persists possibly incorrect name for a system)
  - Improved bz213306 (ricci - log probing can take minutes to complete)
  - Fixed starting/stopping services
  - Fixed deleting cluster
  - Fixed deleting node
  - Fixed redirection for all async->busy wait calls
  - Storage module: properly probe cluster quorum if LVM locking
    is marked as clustered
  - Resolves: bz215039, bz215034, bz214790, bz213690, bz213266
  - Resolves: bz213083, bz212601, bz212021, bz212006, bz212584
  - Resolves: bz212440
  - Related: bz213306


author: Stanko Kupcevic <kupcevic@redhat.com> 0.8-21
changelog:
  - 211564: ricci allocates huge memory chunk, causing long swapping
  - 211345: cluster_adapters is missing import of Xenvm module
  - 211191: SELinux issues tracking bug
  - 211370: retrieving log from node fails
  - 211942: Xenvm moniker must be eradicated from UI
  - 211375: unable to reliably create a cluster
  - 211373: reboot node fails from storage tab


author: Stanko Kupcevic <kupcevic@redhat.com> 0.8-16
changelog:
  - Enable zope/plone inclusion on RHELs
  - Remove luci's dependency on ricci
  - Many improvements of cluster management interface
  - Add full GFS1/2 support; detect many other filesystems
  - Suppress msgs from init script (bz204235)
  - Upgrade zope to 2.9.4 (track Fedora Core)


author: Stanko Kupcevic <kupcevic@redhat.com> 0.8-12
changelog:
  - Don't auto-start ricci after installation, do it manually
  - Under certain circumstances, default luci password would not get reset
  - Many Luci improvements


author: Stanko Kupcevic <kupcevic@redhat.com> 0.8-11.7
changelog:
  - Move ricci-modrpm, ricci-modlog, ricci-modstorage, ricci-modservice
    from /usr/sbin to /usr/libexec


author: Stanko Kupcevic <kupcevic@redhat.com> 0.8-11
changelog:
  - Spin off clustermon.srpm (modcluster, cluster-snmp and
    cluster-cim) from conga.srpm
  - Luci: tighten down security


author: Will Cohen <wcohen@redhat.com> - 0.9.4-14
changelog:
  - Resolves: rhbz498619 Oprofile: Add support for Nehalem-EP processors.
  - Resolves: rhbz527679 Rebuild with fixed version of binutils.


author: Will Cohen <wcohen@redhat.com> - 0.9.4-12
changelog:
  - Resolves: rhbz518480 Correct daemonization of oprofiled on ia64.
  - Resolves: rhbz450642 Handle possible null sym table.


author: Will Cohen <wcohen@redhat.com> - 0.9.4-7
changelog:
  - Rebase on 0.9.4 release to provide java support. Resolves: rhbz #474666
  - Correct handling of --verbose. Resolves: rhbz #454969


author: Will Cohen <wcohen@redhat.com> - 0.9.3-7
changelog:
  - Rebase on 0.9.3 release. Resoves: rhbz #253109, 
  - Add Greyhound family 0x10 support to oprofile. Resolves: rhbz #232956
  - Cell support for oProfile. Resolves: rhbz #226085
  - 970MP must be treated as a different target. Resolves: rhbz#232041
  - Default POWER6 oprofile event incorrect. Resolves: rhbz #238132
  - typo in opreport man page. Resolves: rhbz #222481
  - Oprofile cant demangle 64bit c++ symbols. Resolves: rhbz #244399
  - OProfile on DD3.0 or later POWER5+ fails. Resolves: rhbz #244717
  - LoP Toolchain, OProfile XML output. Resolves: rhbz #253106
  - Add support for POWER5+ revision 3.0 an.... Resolves: rhbz #253410


author: Will Cohen <wcohen@redhat.com> - 0.9.2-6
changelog:
  - Correct backtrace documentation. Resolves: rhbz#214793.
  - Correct race condition. Resolves: rhbz#220116.


author: Will Cohen <wcohen@redhat.com>
changelog:
  - Eliminate AUTOMAKE and ACLOCAL definitions.
  - Correct QTDIR and add oprof_start to file manifests.


author: Will Cohen <wcohen@redhat.com>
changelog:
  - put in s390.
  - Fix includes for asserts.
  - Make sure elinks is available for html to txt conversion.


author: Will Cohen <wcohen@redhat.com>
changelog:
  - check min event counts.
  - revised op_to_source output to avoid changing line count.
  - p4event events revised.
  - hammer events revised.


author: Will Cohen <wcohen@redhat.com>
changelog:
  - Use /proc/ksym for module information.
  - Correct separate debuginfo handling.
  - Configure with --enable-abi.


author: Will Cohen <wcohen@redhat.com>
changelog:
  - turn on build for ppc64
  - change order op_visualise searches lib directories.
  - revise oprofile-0.4-deprecate patch.
  - utils/oprofile kernel range check, --save, and do_dump corrections.
  - update gui to use "--separate=library".


author: Will Cohen <wcohen@redhat.com>
changelog:
  - Syscall value for x86_64.
  - Update manpage and documentation.
  - Revise utils/* to deprecate old.
  - Include CPU_P4_HT2 in op_help.c
  - Revise how CPU_TIMER_INT handled.
  - Apply cookie patch for all archs.
  - Correct autogen.sh location.


author: Will Cohen <wcohen@redhat.com>
changelog:
  - Hack to get correct syscall for ia64.
  - Hack to get get timer interupt data.
  - Fix doc/Makefile.am.


author: Milan Crha <mcrha@redhat.com> - 1.12.3-14.el5
changelog:
  - Add patch for RH bug #247779 (IMAP filtering doesn't work always).
  - Add patch for RH bug #460669 (exchange connector leaks).
  - Add patch for RH bug #433648 (crash when authenticate to eex 2k7).
  - Add patch for RH bug #437758 (crash when disable account).
  - Add patch for RH bug #484232 (backport CalDAV backend from 2.26 version).


author: Matthew Barnes <mbarnes@redhat.com> - 1.12.3-6.el5
changelog:
  - Add patch for RH bug #436800 (crash on malformed vcard).
  - Add patch for RH bug #431663 (support simple binds for GAL access).


author: Matthew Barnes <mbarnes@redhat.com> - 1.12.3-1.el5
changelog:
  - Update to 1.12.3
  - Set use_gtk_doc to 1 to pull in gtk-doc BR.
  - Run gtkdocize in prep to avoid requiring gtk-doc 1.9.


author: Matthew Barnes <mbarnes@redhat.com> - 1.12.1-3.el5
changelog:
  - Disable GNOME Keyring for password storage since there's no migration
    path for users with passwords stored in key files.


author: Matthew Barnes <mbarnes@redhat.com> - 1.8.0-21.el5
changelog:
  - Add patch for RH bug #229707 (timezone updates).
  - Add patch for RH bug #235289 (APOP authentication vulnerability).
  - Add patch for RH bug #242957 (empty timezone names cause crash).


author: Matthew Barnes <mbarnes@redhat.com> - 1.8.0-1.fc6
changelog:
  - Update to 1.8.0
  - Remove evolution-data-server-1.5.4-make_imap4_optional.patch (fixed upstream)
    and save remaining hunk as evolution-data-server-1.8.0-no-gnome-common.patch.
  - Remove patch for RH bug #202329 (fixed upstream).
  - Remove patch for Gnome.org bug #349847 (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 1.7.4-5
changelog:
  - Remove patches for Gnome.org bug #309079 (rejected upstream).
  - One of these patches was causing RH bug #167157.


author: Matthew Barnes <mbarnes@redhat.com> - 1.7.4-3
changelog:
  - Revert to version 1.7.4 to prevent API/ABI breakage.
  - Add back patch to make --with-libdb configure option work.


author: Matthew Barnes <mbarnes@redhat.com> - 1.7.90.1-1
changelog:
  - Update to 1.7.90.1
  - Add patch for Gnome.org bug #348725.
  - Remove patch to make --with-db configure option work (fixed upstream).


author: Matthew Barnes <mbarnes@redhat.com> - 1.7.4-2
changelog:
  - Dynamically link to BDB.
  - Add patch to make --with-db configure option work.
  - Add Requires for db4 and BuildRequires for db4-devel.
  - Clean up spec file, renumber patches.


author: Matthew Barnes <mbarnes@redhat.com> - 1.7.1-2
changelog:
  - Add temporary patch evolution-data-server-1.7.1-nss_auto_detect.patch
    to help `configure' detect the SSL modules (closes #191567).


author: Matthew Barnes <mbarnes@redhat.com> - 1.7.1-1
changelog:
  - Update to 1.7.1
  - Bump eds_base_version from 1.6 to 1.8.
  - Disable evolution-data-server-1.2.0-validatehelo.patch (accepted upstream).


author: David Malcolm <dmalcolm@redhat.com> - 1.5.4-4
changelog:
  - updated patch 300 to remove usage of GNOME_COMPILE_WARNINGS from configure.in
    (since gnome-common might not be available when we rerun the autotools)


author: David Malcolm <dmalcolm@redhat.com> - 1.5.4-3
changelog:
  - added patch to make the "imap4"/"IMAP4rev1" backend optional; disable it in 
    our packages; re-run automake since we have touched various Makefile.am 
    files; rerun intltoolize to avoid incompatibilities between tarball copy of
    intltool-merge.in and intltool.m4 in intltool package (@EXPANDED_LIBDIR@
    renamed to @INTLTOOL_LIBDIR@) (#167574)
  - explicitly list the camel providers and e-d-s extension files in the spec file


author: David Malcolm <dmalcolm@redhat.com> - 1.5.4-2
changelog:
  - added patch from David Woodhouse to validate reverse DNS domain before using 
    in SMTP greeting (patch 103, #151121)


author: David Malcolm <dmalcolm@redhat.com> - 1.5.3-2
changelog:
  - Update specfile and patch 5 (evolution-data-server-1.3.5-nspr_fix.patch) to
    use nss rather than mozilla-nss throughout


author: David Malcolm <dmalcolm@redhat.com> - 1.4.1.1-2
changelog:
  - Updated license field to reflect change from GPL to LGPL
  - Remove all static libraries, not just those in /usr/lib; avoid listing libdir
    subdirectory so that we can be more explicit about the package payload (bug


author: David Malcolm <dmalcolm@redhat.com> - 1.4.1-2
changelog:
  - Updated patch 102 (fix-implicit-function-declarations) to include fix for 
    http calendar backend (thanks to Peter Robinson)


author: David Malcolm <dmalcolm@redhat.com> - 1.4.0-1
changelog:
  - 1.4.0
  - Removed evolution-data-server-1.3.8-fix-libical-vsnprintf.c.patch; a version
    of this is now upstream (was patch 103, added in 1.3.8-2)


author: David Malcolm <dmalcolm@redhat.com> - 1.3.8-5
changelog:
  - Add -Werror-implicit-function-declaration back to CFLAGS at the make stage, 
    after the configure, to spot 64-bit problems whilst avoiding breaking 
    configuration tests; expand patch 102 to avoid this breaking libdb's CFLAGS


author: David Malcolm <dmalcolm@redhat.com> - 1.3.8-4
changelog:
  - Remove -Werror-implicit-function-declaration from CFLAGS; this broke the
    configuration test for fast mutexes in the internal copy of libdb, and hence
    broke access to local addressbooks (#166742)
  - Introduce static_ldap macro; use it to link to static evolution-openldap 
    library, containing NTLM support for LDAP binds (needed by Exchange support)


author: David Malcolm <dmalcolm@redhat.com> - 1.3.8-1
changelog:
  - 1.3.8
  - Add -Werror-implicit-function-declaration to CFLAGS, to avoid 64-bit issues
    and add patch to fix these where they occur (patch 102)


author: David Malcolm <dmalcolm@redhat.com> - 1.3.5-2
changelog:
  - Added patch to use nspr rather than mozilla-nspr when doing pkg-config tests
    (Patch5: evolution-data-server-1.3.5-nspr_fix.patch)


author: David Malcolm <dmalcolm@redhat.com> - 1.3.5-1
changelog:
  - 1.3.5
  - Split eds_major (was 1.2) into eds_base_version (1.4) and eds_api_version
    (1.2) to correspond to BASE_VERSION and API_VERSION in configure.in; updated
    rest of specfile accordingly.
  - Removed upstreamed patch: 
    evolution-data-server-1.2.0-cope-with-a-macro-called-read.patch


author: David Malcolm <dmalcolm@redhat.com> - 1.2.2-3
changelog:
  - bumped libsoup requirement to 2.2.3; removed mozilla_build_version, using
    pkg-config instead for locating NSPRS and NSS headers/libraries (#158085)


author: David Malcolm <dmalcolm@redhat.com> - 1.2.0-3
changelog:
  - Removed explicit run-time spec-file requirement on mozilla.
    The Mozilla NSS API/ABI stabilised by version 1.7.3
    The libraries are always located in the libdir
    However, the headers are in /usr/include/mozilla-%{mozilla_build_version}
    and so they move each time the mozilla version changes.
    So we no longer have an explicit mozilla run-time requirement in the specfile; 
    a requirement on the appropriate NSS and NSPR .so files is automagically generated on build.
    We have an explicit, exact build-time version, so that we can find the headers (without
    invoking an RPM query from the spec file; to do so is considered bad practice)
  - Introduced mozilla_build_version, to replace mozilla_version
  - Set mozilla_build_version to 1.7.6 to reflect current state of tree


author: David Malcolm <dmalcolm@redhat.com> - 1.1.6-4
changelog:
  - added macro use_gtk_doc; added missing BuildRequires on gtk-doc; enabled gtk-doc generation on all platforms (had been disabled on ia64)


author: David Malcolm <dmalcolm@redhat.com> - 1.1.4.1-1
changelog:
  - Update from 1.0.3 to 1.1.4.1
  - Updated eds_major from 1.0 to 1.2; fixed translation search path.
  - Removed 64-bit patch for calendar backend hash table; upstream now stores pointers to ECalBackendFactory, rather than GType
  - Removed calendar optimisation patch for part of part of bug #141283 as this is now in the upstream tarball
  - Added /usr/lib/evolution-data-server-%{eds_major} to cover the extensions, plus the camel code now in e-d-s, rather than evolution
  - Added /usr/share/pixmaps/evolution-data-server-%{eds_major} to cover the category pixmaps
  - Camel code from evolution is now in evolution-data-server:
    - Added camel-index-control and camel-lock-helper to packaged files
    - Added mozilla dependency code from the evolution package
    - Ditto for LDAP
    - Ditto for krb5
    - Ditto for NNTP support handling
    - Ditto for --enable-file-locking and --enable-dot-locking
  - Added requirements on libbonobo, libgnomeui, gnome-vfs2, GConf2, libglade2
  - Updated libsoup requirement from 2.2.1 to 2.2.2
  - Enabled gtk-doc


author: David Malcolm <dmalcolm@redhat.com> - 1.0.3-2
changelog:
  - fixed packaging of translation files to reflect upstream change to GETTEXT_PACKAGE being evolution-data-server-1.0 rather than -1.5


author: David Malcolm <dmalcolm@redhat.com> - 1.0.3-1
changelog:
  - update from upstream 1.0.2 to 1.0.3:
    * Address Book
      - prevent e_book_commit_contact from crashing on multiple calls (Diego Gonzalez)
      - prevent file backend from crashing if uid of vcard is NULL (Diego Gonzalez)

    * Calendar
              - fix libical build for automake 1.9 (Rodney)
      - fix putenv usage for portability (Julio M. Merino Vidal)

    * Updated Translations:
      - sv (Christian Rose)

  - Removed patches to fix build on x86_64 and calendar optimisation for XB59004 as these are in the upstream tarball


author: David Malcolm <dmalcolm@redhat.com> - 1.0.2-6
changelog:
  - Amortize writes to a local cache of a webcal calendar, fixing further aspect of #141283 (upstream bugzilla #70267), as posted to mailing list here:
  http://lists.ximian.com/archives/public/evolution-patches/2004-December/008338.html
  (The groupwise part of that patch did not cleanly apply, so I removed it).


author: David Malcolm <dmalcolm@redhat.com> - 1.0.2-5
changelog:
  - Added fix for #141283 (upstream bugzilla XB 59904), a backported calendar 
  optimisation patch posted to upstream development mailing list here:
  http://lists.ximian.com/archives/public/evolution-patches/2004-November/008139.html


author: David Malcolm <dmalcolm@redhat.com> - 1.0.2-4
changelog:
  - Added patch to fix usage of GINT_TO_POINTER/GPOINTER_TO_INT for calendar backend GType hash table, breaking on ia64  (#136914)


author: David Malcolm <dmalcolm@redhat.com> - 1.0.2-3
changelog:
  - added workaround for a backend leak that causes the "contacts" calendar 
  backend to hold open an EBook for the local contacts (filed upstream at:
  http://bugzilla.ximian.com/show_bug.cgi?id=68533 ); this was causing e-d-s to
  never lose its last addressbook, and hence never quit.  We workaround this by
  detecting this condition and exiting when it occurs, fixing bug #134851 and #134849.


author: David Malcolm <dmalcolm@redhat.com> - 1.0.2-2
changelog:
  - added patch to fix build on x86_64 (had multiple definitions of mutex code in libdb/dbinc.mutex.h)


author: David Malcolm <dmalcolm@redhat.com> - 1.0.1-1
changelog:
  - update from 1.0.0 to 1.0.1
  - removed patch that fixed warnings in calendar code (now in upstream tarball)


author: David Malcolm <dmalcolm@redhat.com> - 1.0.0-2
changelog:
  - fixed various warnings in the calendar code 
    (filed upstream here: http://bugzilla.ximian.com/show_bug.cgi?id=66383)


author: David Malcolm <dmalcolm@redhat.com> - 0.0.99-1
changelog:
  - update from 0.0.98 to 0.0.99
  - increased libsoup requirement to 2.2.0 to match configuration script


author: Adam Tkac <atkac redhat com> 3:3.2.0b6-11
changelog:
  - handle databases with zero words well (#222419)
  - htstat got segfault when there are no words in db
  - write error message when external parser doesn't exist (#435741)
  - don't write spurious error when allow_numbers is true (#435743)
  - mark modifiable config files as noreplace (#459971)


author: Phil Knirsch <pknirsch@redhat.com> 3:3.2.0b6-4
changelog:
  - Fixed security bug with unescaped output in htsearch and qtest (#144127)
  - Removed .la and .a libs from package (#145649)


author: Phil Knirsch <pknirsch@redhat.com> 3.2.0b6-1
changelog:
  - Update to htdig-3.2.0b6
  - Removed obsolete patches (already included upstream).
  - Added manpages to basic package.
  - Added missing httpd BuildPreReq (#125037)
  - Added fix for broken behaviour with robots.txt (#126482)


author: Phil Knirsch <pknirsch@redhat.com> 3.2.0b5-6
changelog:
  - Removed buildroot cruft from HtFileFype (#116442).
  - Use mktemp in HtFileFype to create temporary file (#116443).


author: Bernhard Rosenkraenzer <bero@linux-easy.com> 3.2.0-2.20020505
changelog:
  - Fix build with current toolchain (automake 1.6, autoconf 2.53 changes)
  - Update snapshot, fixes some more problems


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Updated to latest snapshot to fix several problems.
  - Fixed a problem with htdig segfaulting on s390 (#58202).


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.2.0-0.b3.4
changelog:
  - move pictures etc. to base package and to a directory outside of
    /var/www - The current KDevelop search function doesn't work without
    them.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - built against glibc
  - build all the fuzzy databases before packaging, because it is time
    consuming operation and we don't want the user to be impatient


author: Tim Waugh <twaugh@redhat.com> 1.6-2
changelog:
  - New archive from Sebastian.
  - Run fmtutil in %post and %postun.
  - Require new xmltex.
  - Fix body-start().


author: PLD Team <pld-list@pld.org.pl>
changelog:
  All persons listed below can be reached at <cvs_login>@pld.org.pl

  $Log: passivetex.spec,v $
  Revision 1.8  2001/08/21 10:12:42  wrobell
  - ver. 1.6
  - stb

  Revision 1.7  2001/03/27 16:55:44  wiget
  Requires xmltex

  Revision 1.6  2001/03/27 16:53:29  wiget
  changed Source URL, updated to 1.5 version, more files in package; now passivetex is more powerfull and work ;-)

  Revision 1.5  2001/01/27 03:25:36  kloczek
  - added tetex to Prerq,
  - simplified %post, %postun.

  Revision 1.4  2001/01/27 00:08:39  klakier
  - added URL

  Revision 1.3  2001/01/27 00:07:47  klakier
  - added URL

  Revision 1.2  2001/01/24 12:41:17  klakier
  - small fixes

  Revision 1.1  2001/01/24 12:31:43  klakier
  - initial


author: Jindrich Novy <jnovy@redhat.com> 4.999.9-0.2.20091007.beta
changelog:
  - include XZ in RHEL5 (#519122)
  - repack tarball to bz2, RHEL5 doesn't know anything about XZ yet
  Resolves: #519122


author: Bill Nottingham <notting@redhat.com> 4.999.8-0.6.beta
changelog:
  - fix release versioning to match guidelines
  - fix up lzma-compat summary/description
  - tweak licensing


author: David Howells <dhowells@redhat.com> 0.8-5
changelog:
  - Work around a problem in the status() function in /etc/init.d/functions where
    multiple recursions through an initscript can confuse pidof (bz 237827).
  - Make initscript wait for cachefilesd to complete after signalling it to stop
    (bz 237827).


author: Steve Dickson <steved@redhat.com> 0.8-2
changelog:
  - Removed some upstream bits that leaked into the RHEL5 
    version (bz 250424)
  - Added the creation/removal of the cache directory when
    the rpm is installed and removed.


author: Steve Dickson <steved@redhat.com> 0.4-3
changelog:
  - Updated init.d script to look for cachefilesd in /sbin
  - Added postun and preun rules so cachefilesd is stopped
    and started when the rpm is updated or removed.


author: Steve Dickson <steved@redhat.com> 0.2-1
changelog:
  - Made the daemon 64-bit application.
  - Changed the syslog logging to log the daemon's PID
  - Changed OS error logging to log errno number as well the string


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-21..el5_5.2
changelog:
  - Fix multilib upgrade problems on ia64 (#649682)
  - Fix test problems with multilib workaround for ia64 (#649725)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-21..el5_5.1
changelog:
  - Fix some cases where the file chooser is not responding
    well to initial selection (Resolves: #648555, #648557)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-20
changelog:
  - Update Telugu translations (Resolves: #225373)
  - Fix a problem with tray icons in KDE (Resolves: #216847, #236650, #240049)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-17
changelog:
  - Make printing to raw print queues work  (#224202)
  - Fix a crash in gdk_region_polygon()  (#237153)
  - Fix a warning from GtkCalendar   (#218676)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-13
changelog:
  - Further fixes for bug 218755:
    - Make gdk_pixbuf_loader_close() idempotent
    - Always emit the closed signal when the loader is closed


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-10
changelog:
  - Fix error handling in pixbuf loaders (#218755)
  - Properly pass multi-value options to cups (#219115)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-8
changelog:
  - Fix a crash in the handling of invalid icon themes (#218247)
  - Give accessible names to message dialogs (#215472)


author: Matthias Clasen <mclasen@redhat.com> - 2.10.4-1
changelog:
  - Update to 2.10.4
  - Drop upstreamed patches
  - Update the search patch
  - Require pkgconfig in the -devel package


author: Ray Strode <rstrode@redhat.com> - 2.10.1-2
changelog:
  - patch from Jonathan Matthew <jontahn@kaolin.wh9.net> to fix
    crash in GtkTreeModelFilter (upstream bug 346800)


author: Matthias Clasen <mclasen@redhat.com> - 2.9.0-4
changelog:
  - Bump required versions of GLib, Pango and cairo
  - Add conflicts to force updating theme engine packages


author: Christopher Aillon <caillon@redhat.com> 2.8.11-6
changelog:
  - Fix up jkeating's recent %changelog entry to match this spec's style
  - Make the devel package Require %{version}-%{release}


author: Matthias Clasen <mclasen@redhat.com> - 2.4.14-1
changelog:
  - Upgrade to 2.4.14
  - Remove the no longer needed pa.po patch
  - Adjust gtk+-2.4.7-update-counter.patch


author: Matthias Clasen <mclasen@redhat.com> - 2.4.13-5
changelog:
  - Include an upstream bugfix in the 
    gtk+-2.4.9-treeview-activate.patch. This fixes
    a crasher bug (#137461)


author: Owen Taylor <otaylor@redhat.com> - 2.4.7-2.2
changelog:
  - Fix problem with infinite loop on bad BMP data (#130450, 
    test BMP from Chris Evans, fix from Manish Singh)


author: Matthias Clasen <mclasen@redhat.com> - 2.4.1-3
changelog:
  - Don't install testgtk and testtext
  - Rename binaries to -32/-64 (#124478)
  - Move arch-dependent config files to /etc/gtk-2.0/$host (#124482)
  - Add wrappers for updating the arch-dependent config files


author: Mark McLoughlin <markmc@redhat.com> 2.3.4-1
changelog:
  - Update to 2.3.4
  - Remove the xft-prefs patch, its upstream now
  - Don't kill libtool's hardcode_libdir_flag_spec anymore


author: Owen Taylor <otaylor@redhat.com> 2.2.4-2.1
changelog:
  - Fix up tutorial in packaging (#90197), add FAQ 
  - Back out change to make KP_Decimal interpretation dependent on locale
    (#101046)


author: Owen Taylor <otaylor@redhat.com> 2.2.2-2.1
changelog:
  - XFlush() rather than XSync() at the end of process_all_updates()
    (big remote X anaconda speedup)
  - Add patch to fix frequent Red Hat 9 crash 
    http://bugzilla.gnome.org/show_bug.cgi?id=105745


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Fix postun to not try to run a script through ldconfig
  - Only remove the gtk.immodules and gdk-pixbuf.loaders files if uninstalling
    while not upgrading


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.1.3
  - remove TODO from doc, no longer exists
  - remove 64bit patch, now upstream
  - comment out scroll_to patch, jrb has to deal with this
  - remove keycode patch now upstream
  - remove usintl patch now upstream
  - remove imenvar patch, now upstream
  - remove xftprefs patch now upstream
  - remove xftdraw patch now upstream
  - remove installdir patch (no longer applies) and do "makeinstall RUN_QUERY_IMMODULES_TEST=false"
  - remove extranotify patch, now upstream
  - add gdk-pixbuf-query-loaders to file list
  - remove gdk-pixbuf.loaders and gtk.immodules in postun as they are
    not owned by the package (these should probably live in /var since they 
    aren't config files and we overwrite them all the time)


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Fix a memory leak in xftprefs.patch
  - Fix extra settings notifies on startup that were causing significant
    performance problems as fonts were reloaded.


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Fixes to GtkIMContextSimple compose table for us-intl keyboards
    (#70995, Alexandre Oliva)
  - Fix problem with keycodes passed to GtkIMContextXIM


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Remove fixed-ltmain.sh, no longer needed
  - Fix bug with GTK_IM_MODULE environment variable
  - Remove profile.d entries setting GDK_USE_XFT, since we now default to it on
  - Backport patch from CVS HEAD to get Xft to work on non-RENDER XServers
  - Version 2.0.6


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Add reference docs to -devel package (#61184)
  - Use GTK2_RC_FILES, not GTK_RC_FILES, since KDE points GTK_RC_FILES 
    to gtk-1.2 ~/.gtkrc


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Version 1.3.11
  - check atk/pango versions explicitly prior to build,
    so that --nodeps tricks don't result in bad binary RPMs


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - PreReq specific pango and atk versions (#49434)
  - Don't package gtk.immodules (#49584)
  - Added BuildPrereq for libtiff-devel, libjpeg-devel, libpng-devel (#49495)
  - Configure with --disable-gtk-doc (#48987)
  - Package libgdk_pixbuf_xlib (#47753)


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Version 1.3.1
  - move back to /usr
  - Remove gtk-config.1 manpage from build since
    it conflicts with gtk+-devel. When we go to 
    gtk+ gtk+1.2 setup, we should add it back


author: Mike A. Harris <mharris@redhat.com> 0.9.1-3
changelog:
  - Added "BuildRequires: libdrm-devel >= 2.0-1" for (#192358)
  - Bumped sdk dep to pick up proto-devel indirectly.


author: Mike A. Harris <mharris@redhat.com> 0.8.1.2-1
changelog:
  - Updated xorg-x11-drv-sis to version 0.8.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.8.1-1
changelog:
  - Updated xorg-x11-drv-sis to version 0.8.1 from X11R7 RC2
  - Added "BuildRequires: mesa-libGL-devel >= 6.4-4" for DRI-enabled builds.


author: Dan Williams <dcbw@redhat.com> - 1.1.2-12
changelog:
  - Fix for CVE-2008-3834
  - Resolves: #466227
  - Remove dbus-libs Obsoletes on dbus; not needed
  - Resolves: #466007


author: Ray Strode <rstrode@redhat.com> - 1.0.0-4
changelog:
  Resolves: #217721
  - Don't die on SIGHUP when rereading config file, if it's no
    longer compatible with the version of the bus running


author: John (J5) Palmieri <johnp@redhat.com> - 1.0.0-1
changelog:
  - update to D-Bus 1.0.0 "Blue Bird"
  - build tests, asserts and verbose mode off
  - patch so we are not fatal when checks fail


author: John (J5) Palmieri <johnp@redhat.com> - 0.90-6
changelog:
  - change the arch-deps.h include directory to /usr/lib[64] instead of /lib[64]
    in the dbus-1.pc file after compile


author: John (J5) Palmieri <johnp@redhat.com> - 0.90-4
changelog:
  - add patch that pregenerates the xml introspect file so d-bus doesn't
    have to be running suring the build.


author: Karsten Hopp <karsten@redhat.de> 0.61-5.2
changelog:
  - add buildrequires libICE-devel, libSM-devel, libcap-devel
  - change buildrequires form libX11 to libX11-devel


author: John (J5) Palmieri <johnp@redhat.com> - 0.61-5
changelog:
  - Backport patch from dbus-connection.c
    - Allows interfaces to be NULL in the message header as per the spec
    - Fixes a problem with pendings calls blocking on a data starved socket


author: John (J5) Palmieri <johnp@redhat.com> 0.61-3
changelog:
  - ABI hasn't changed so add patch that makes dbus-sharp think
    it is still 0.60 (mono uses hard version names so any change
    means apps need to recompile)


author: John (J5) Palmieri <johnp@redhat.com> 0.60-7
changelog:
  - Add patch to fix the python callchain
  - Symlink dbus-send to /usr/bin because some applications
    look for it there


author: John (J5) Palmieri <johnp@redhat.com> 0.60-5
changelog:
  - move base libraries and binaries to /bin and /lib so they can be started
    before /usr is mounted on network mounted /usr systems
  - have D-Bus start early


author: John (J5) Palmieri <johnp@redhat.com> - 0.36.2-1
changelog:
  - upgrade to 0.36.2 which fixes an exploit where
    users can attach to another user's session bus (CAN-2005-0201)


author: John (J5) Palmieri <johnp@redhat.com> - 0.36-1
changelog:
  - Upgrade to dbus-0.36
  - Split modules that go into lib/python2.4/site-packages/dbus
  and those that go into %{python_sitelib}/dbus (they differ on 64bit)
  - Renable Qt bindings since packages in core can use them


author: John (J5) Palmieri <johnp@redhat.com> - 0.35.2-1
changelog:
  - Upgrade to dbus-0.35.2
  - removed dbus-0.34-kill-babysitter.patch
  - removed dbus-0.34-python-threadsync.patch
  - removed dbus-0.23-selinux-avc-audit.patch
  - added dbus-0.35.2-selinux-avc-audit.patch
  - take out restarts on upgrade


author: John (J5) Palmieri <johnp@redhat.com> - 0.34-1
changelog:
  - Upgrade to dbus-0.34
  - added dbus-0.34-kill-babysitter.patch
  - added dbus-0.34-python-threadsync.patch
  - remove dbus-0.32-print_child_pid.patch
  - remove dbus-0.32-deadlock-fix.patch
  - remove dbus-0.33-types.patch


author: John (J5) Palmieri <johnp@redhat.com> - 0.32-5
changelog:
  - replace selinux_init patch with selinux_chroot_workaround patch
    to work around bad selinux interactions when using chroots
    on the beehive build machines


author: John (J5) Palmieri <johnp@redhat.com> - 0.32-2
changelog:
  - add selinux-init patch to fix dbus from segfaulting when
    building on machines that don't have selinux enabled


author: John (J5) Palmieri <johnp@redhat.com> - 0.31-1
changelog:
  - update to upstream version 0.31
  - take out user has same id patch (merged upstream)
  - udi patch updated
  - dbus-daemon-1 renamed to dbus-daemon
  - dbus-glib-tool renamed to dbus-binding-tool
  - force gcc33 because pyrex generate improper lvalue code
  - disable audit patch for now


author: John (J5) Palmieri <johnp@redhat.com> - 0.23-4
changelog:
  - Explicitly pass in the pid file location to ./configure instead of
    letting it guess based on the build enviornment


author: John (J5) Palmieri <johnp@redhat.com> - 0.23-1
changelog:
  - Update to upstream version 0.23
  - Drop all patches except for the UDI patch as they have been 
    integrated upstream 
  - List of API changes:
        * add setgroups() to drop supplementary groups
        * removed dbus_bug_get_with_g_main since it's been replaced by dbus_g_bus_get
        * added support for int64 and uint64 to the python bindings
        * use SerivceOwnerChanges signal instead of ServiceCreated and ServiceDeleted


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Add a requires for glib2-devel in the devel package
  - Add SE-Linux backport from Colin Walters that fixes 
    messages getting lost in SE-Linux contexts


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Fixed patch to use dbus-1 instead of dbus-1.0
  - (configure.in): Exported just the datadir instead of
    the full path to the dbus datadir for consistency


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - reverting BuildRequires: redhat-release because of issues with build system
  - added precompiled version of the messagebus init script


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Moved dbus-viewer to new dbus-gtk package so that dbus-glib
    no longer requires X or GTK libraries. (RH Bug #130029)


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Added lib64 workaround for python bindings installing to
    the wrong lib directory on 64 bit archs


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Moved dbus-viewer, dbus-monitor and dbus-glib-tool 
    into the dbus-glib package so that the main dbus
    package does not depend on glib (Bug #125285)


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Conflict with cups prior to configuration file change, so that the
    %postun service condrestart works.


author: Havoc Pennington <hp@redhat.com> 0.13-2
changelog:
  - see if removing qt subpackage for now will get us through the build system,
    qt bindings not useful yet anyway


author: Havoc Pennington <hp@redhat.com> 0.11.91-3
changelog:
  - break the tiny dbus-launch that depends on X into separate package
    so a CUPS server doesn't need X installed


author: Havoc Pennington <hp@redhat.com> 0.6.93-1
changelog:
  - new cvs snap that actually forks to background and changes 
    user it's running as and so forth
  - create our system user in pre


author: Havoc Pennington <hp@redhat.com> 0.6.91-1
changelog:
  - disable qt for now because beehive hates me
  - pull a slightly newer cvs snap that creates socket directory
  - cat the make check log after make check fails


author: Karsten Hopp <karsten@redhat.com> 1.5.22-7
changelog:
  - add fix for CVE-2009-3736,
    libltdl may load and execute code from a library in the current directory


author: Karsten Hopp <karsten@redhat.de> 1.5.22-1
changelog:
  - update to 1.5.22, most prominent fixes are:
    - Fix 1.5 regression that caused linking a program `-static' to also
      link statically against installed libtool libraries, contrary to
      documented (and actual 1.4.x) behavior.
    - Fix silent failure of `libtoolize --ltdl' if libltdl files not present.


author: Florian La Roche <laroche@redhat.com>
changelog:
  - add version-release to the Provides: and fix our own
    Requires: line to the current naming scheme


author: Daniel Reed <djr@redhat.com> 1.5.12.multilib2-3.4.3
changelog:
  - update to the 1.5.12 bugfix release
    - Makes use of $datarootdir, which is necessary for Autoconf >= 2.60.
    - Correctly skip hppa, x86_64, and s390* in tests/demo-nopic.test.
    - Interpret `include' statements in toplevel ld.so.conf file.
    - While "parsing" /etc/ld.so.conf, skip comments.
  - add dependency on gcc version; /usr/bin/libtool hardcodes paths into gcc's internal directories
  - replace "libtool-libs" with "libtool-ltdl" and "libtool-ltdl-devel"


author: Daniel Reed <djr@redhat.com> 1.5.10-1
changelog:
  - update to the 1.5.10 bugfix release
    - obsoletes libtool-1.4-nonneg.patch
    - obsoletes libtool-1.5-libtool.m4-x86_64.patch
    - obsoletes libtool-1.4.2-multilib.patch
    - obsoletes libtool-1.4.2-demo.patch
    - obsoletes libtool-1.5-testfailure.patch


author: Jens Petersen <petersen@redhat.com> - 1.5.4-1
changelog:
  - 1.5.4 bugfix release
  - improve libtool-1.4.2-multilib.patch (Albert Chin) and only apply to
    libtool.m4
  - use bootstrap instead of autoreconf to update configuration
  - update libtool-1.4.3-ltmain-SED.patch to libtool-1.5.4-ltmain-SED.patch


author: Jens Petersen <petersen@redhat.com> - 1.5.2-1
changelog:
  - update to 1.5.2 bugfix release
  - update libtool-1.5-libtool.m4-x86_64.patch
  - nolonger need libtool-1.5-mktemp.patch, libtool-1.5-expsym-linux.patch,
    libtool-1.5-readonlysym.patch, libtool-1.5-relink-libdir-order-91110.patch,
    libtool-1.5-AC_PROG_LD_GNU-quote-v-97608.patch and libtool-1.5-nostdlib.patch


author: Jens Petersen <petersen@redhat.com> - 1.5-4
changelog:
  - remove the quotes around LD in AC_PROG_LD_GNU (#97608)
    [reported by twaugh]
  - use -nostdlib also when linking with g++ and non-GNU ld in
    _LT_AC_LANG_CXX_CONFIG [reported by fnasser, patch by aoliva]
  - use %configure with CC and CXX set


author: Jens Petersen <petersen@redhat.com> - 1.5-3
changelog:
  - don't use %configure since target options caused libtool to assume
    i386-redhat-linux-gcc instead of gcc for CC (reported by Joe Orton)
  - add libtool-1.5-relink-libdir-order-91110.patch to fix order of lib dirs
    searched when relinking (#91110) [patch from Joe Orton]


author: Jens Petersen <petersen@redhat.com> - 1.5-1
changelog:
  - update to 1.5
  - no longer override config.{guess,sub} for rpmbuild %configure,
    redhat-rpm-config owns those now
  - update and rename libtool-1.4.2-s390_x86_64.patch to
    libtool-1.5-libtool.m4-x86_64.patch since s390 now included
  - buildrequire autoconf and automake, no longer automake14
  - skip make check on s390 temporarily
  - no longer skip demo-nopic.test on x86_64, s390 and s390x
  - from Owen Taylor
    - add libtool-1.4.2-expsym-linux.patch (#55607) [from James Henstridge]
    - add quoting in mktemp patch
    - add libtool-1.5-readonlysym.patch
    - add libtool-1.5-testfailure.patch workaround
    - no longer need libtool-1.4.2-relink-58664.patch


author: Florian La Roche <Florian.LaRoche@redhat.de> - 1.4.3-5
changelog:
  - add config.guess and config.sub, otherwise old versions of
    these files can creep into /usr/share/libtool/


author: Jens Petersen <petersen@redhat.com> 1.4.3-3
changelog:
  - fix mktemp to work when running mktemp fails (#76602)
    [reported by (Oron Peled)]
  - remove info dir file, don't exclude it
  - fix typo in -libs description (#79619)
  - use buildroot instead of RPM_BUILD_ROOT


author: Jens Petersen <petersen@redhat.com>
changelog:
  - add --without check build option to allow disabling of "make check"
  - exclude info dir file rather than removing


author: Jens Petersen <petersen@redhat.com> 1.4.3-2
changelog:
  - define SED in ltmain.sh for historic ltconfig files
  - define macro AUTOTOOLS to hold automake-1.4 and aclocal-1.4, and use it
  - leave old missing file for now
  - general spec file cleanup
    - don't copy install files to demo nor mess with installed ltdl files
    - don't need to run make in doc
    - force removal of info dir file
    - don't need to create install prefix dir
    - don't bother gzipping info files ourselves


author: Jens Petersen <petersen@redhat.com> 1.4.3-1
changelog:
  - update to 1.4.3
  - remove obsolete patches (test-quote, dup-deps, libtoolize-configure.ac)
  - apply the multilib patch to just the original config files
  - update x86_64/s390 patch and just apply to original config files
  - use automake-1.4 in "make check" for demo-make.test to pass!
  - remove info dir file that is not installed
  - make autoreconf update missing


author: Jens Petersen <petersen@redhat.com> 1.4.2-11
changelog:
  - don't hardcode "configure.in" in libtoolize (#70864)
    [reported by bastiaan@webcriminals.com]
  - make check, but not on ia64


author: Jens Petersen <petersen@redhat.com> 1.4.2-8
changelog:
  - add old patch from aoliva to fix relinking when installing into a buildroot
  - backport dup-deps fix from cvs stable branch


author: Jens Petersen <petersen@redhat.com> 1.4.2-5
changelog:
  - revert filemagic and archive-shared patches following cvs (#54887)
  - don't change "&& test" to "-a" in ltmain.in


author: Jens Petersen <petersen@redhat.com> 1.4.2-3
changelog:
  - test quoting patch should be on ltmain.in not ltmain.sh (#53276)
  - use file_magic for Linux ELF (#54887)
  - allow link against an archive when building a shared library (#54887)
  - include ltdl.m4 in manifest (#56671)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - patch to use mktemp to create the tempdir
  - use %configure after defining __libtoolize to /bin/true


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - explicitly disable per-arch libraries (#2210)
  - undo hard links and remove zero length file (#2689)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - disable the --cache-file passing to ltconfig; this breaks the older
    ltconfig scripts found around.


author: Nikola Pajkovsky <npajkovs@redhat.com> 2.10.7-7
changelog:
  - Resolves: #513099	Add support for new chip models supported by fschmd to lm_sensors
  - add FSC Syleus
  - add FSC Hades


author: Phil Knirsch <pknirsch@redhat.com> - 2.10.7-5
changelog:
  - Reneabled drivers that are now supported by the kernel driver update
  - Add support for it8718 chips
  - Add support for w83793 chips
  - Fixed uninitialized value warning in sensors-detect
  - Resolves: #473119,#448223,#443742,#474383


author: Phil Knirsch <pknirsch@redhat.com> 2.10.0-1
changelog:
  - Update to lm_sensors-2.10.0
  - Added missing buildprereq on sysfsutils-devel (#189196)
  - Added missing prereq on chkconfig (#182838)
  - Some fiddling to make it build on latest kernels


author: Phil Knirsch <pknirsch@redhat.com> 2.9.2-1
changelog:
  - Update to lm_sensors-2.9.2
  - Fixed wrong subsys locking (#176965)
  - Removed lm_sensors pwmconfig, has been fixed upstream now


author: Phil Knirsch <pknirsch@redhat.com> 2.9.1-4
changelog:
  - Fixed CAN-2005-2672 lm_sensors pwmconfig insecure temporary file usage
    (#166673)
  - Fixed missing optflags during build (#166910)


author: Phil Knirsch <pknirsch@redhat.com> 2.9.1-3
changelog:
  - Update to lm_sensors-2.9.1
  - Fixed wrong/missing location variables for make user
  - Fixed missing check for /etc/modprobe.conf in sensors-detect (#139245)


author: Dave Jones <davej@redhat.com> 2.8.8-4
changelog:
  - Add dependancy on dmidecode rather than the obsolete kernel-utils.
  - Don't delete dmidecode from the buildroot.


author: Harald Hoyer <harald@redhat.com> 2.8.7-2
changelog:
  - added initial /etc/sysconfig/lm_sensors
  - added initscript
  - MAKEDEV the initial i2c devices in initscript and sensors-detect


author: Phil Knirsch <pknirsch@redhat.com> 2.8.3-5
changelog:
  - Fixed initscript to work with 2.6 kernel and made it more quiet (#112286).
  - Changed proposed location of sensors (#116496).
  - Fixed rpath issue.


author: Phil Knirsch <pknirsch@redhat.com> 2.8.2-1
changelog:
  - Update to latest upstream version 2.8.2
  - Fixed wrong & usage in if expression.
  - Included several new perl tools.


author: Phil Knirsch <pknirsch@redhat.com> 2.6.5-6
changelog:
  - Included prog/init scripts and README (#90606).
  - Require kernel-utils for dmidecode (#88367, #65057).


author: Matt Wilson <msw@redhat.com>
changelog:
  - added patch to not include sys/perm.h, as it's gone now.
  - added alpha to ExclusiveArch
  - use make "LINUX_HEADERS=/usr/include" to get kernel headers


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Updated to 2.5.5 which includes the Serverworks drivers. Kernel modules are
    not included though es they have to go into the kernel package
  - Had to remove all references to I2C_SMBUS_I2C_BLOCK_DATA from
    kernel/busses/i2c-i801.c and prog/dump/i2cdump.c as this is not defined in
    our current kernel package


author: Dan Walsh <dwalsh@redhat.com> 2.3-40
changelog:
  - Grab the fdclose patch from FC4
  - fix bug 185973: allow use of sendmail under selinux-policy-strict:
                    apply patch contributed by Ted Rule<ejtr@layer3.co.uk>


author: Jason Vas Dias <jvdias@redhat.com> - 2.3-38.1
changelog:
  - fix bug 188403: anacron SysVinit locking:
    Since anacron just exits when it has no more work to do, the
    initscript cannot do normal /var/lock/subsys/anacron lock file
    creation, else messages such as 'anacron dead but subsys locked'
    will appear when changing init levels. 

    Now, the anacron process itself creates its own 
    /var/lock/subsys/anacron SysVinit lock file and
    /var/run/anacron.pid pid file to co-operate more
    gracefully with the initscript system.


author: Jens Petersen <petersen@redhat.com> - 2.3-29
changelog:
  - don't require vixie-cron (#21176) [reported by Gerald Teschl]
  - in init script don't remove /var/lock/subsys/anacron when stopping (#58462)
  - exit init script with actual exit status (#44600) [reported by Enrico Scholz]


author: Jens Petersen <petersen@redhat.com> - 2.3-27
changelog:
  - in init script do not touch /var/lock/subsys/anacron when starting (#58462)
  - require crontabs (#21176)
  - update source url


author: Jens Petersen <petersen@redhat.com> 2.3-23
changelog:
  - delay the start of anacron by 60min to make startup more pleasant (#68304)
  - at startup run jobs serially and nice 19 to reduce load (#65870, #68304)
  - spec file now in utf-8
  - dont install non-existant NEWS file
  - silence make include warnings


author: Tim Powers <timp@redhat.com>
changelog:
  - fixed startup script so that it doesn't put stuff in /var/lock/subsys.
  	Complains since anacronda turns itself off when it is run, and the file in
  	/var/lock/subsys isn't removed.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Make it support large files (structs, stats, opens and of course:
    _don't use signed longs for file size before and after compression_.)
    This should fix #39470


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - change category to Applications/File, to match
    gzip and bzip2 
  - rename the spec file to ncompress.spec
  - add ppc to the bigendian arch list


author: Michal Hlavinka <mhlavink@redhat.com> - 1.4.8-5.4
changelog:
  - fix: CVE-2009-1581 : CSS positioning vulnerability
  - fix: CVE-2009-1579 : Server-side code injection in map_yp_alias username map
  - fix: CVE-2009-1578 : Multiple cross site scripting issues


author: Michal Hlavinka <mhlavink@redhat.com> - 1.4.8-5.1
changelog:
  - don't transmit cookies under non-SSL connections if the session
    is started under an SSL (https) connection
  - Resolves: CVE-2008-3663, #468398
  - fix release number with respect to Z-stream nvr policy


author: Warren Togami <wtogami@redhat.com> 1.4.7-1
changelog:
  - 1.4.7 with CVE-2006-3174
  - Reduce patch for body text (#194457)
  - Better JP translation for "Check mail" (#196117)


author: Warren Togami <wtogami@redhat.com> 1.4.6-8
changelog:
  - Japanese zenkaku subject conversion      (#196017)
  - Japanese MSIE garbled download ugly hack (#195639)
  - Japanese multibyte attachment view text  (#195452)
  - Japanese multibyte attachment body text  (#194457)
  - Do not convert Japanese Help to UTF-8    (#194599)


author: David Woodhouse <dwmw2@redhat.com> 1.4.6-1
changelog:
  - Upgrade to 1.4.6 proper for CVE-2006-0377 CVE-2006-0195 CVE-2006-0188
  - Script the charset changes instead of using a patch
  - Convert the ko_KR files to UTF-8, dropping invalid characters from
    what's theoretically supposed to be EUC-KR in the original.


author: David Woodhouse <dwmw2@redhat.com> 1.4.6-0.cvs20050812.2
changelog:
  - Convert all locales to UTF-8 instead of legacy character sets to
    work around bug #162852. Except for ko_KR, because iconv doesn't
    believe its help files are actually in EUC-KR as claimed.


author: Warren Togami <wtogami@redhat.com> 1.4.6-0.cvs20050812.1
changelog:
  - snapshot of 1.4.6 because 1.4.5 upstream was a bad release
    this hopefully will also work on PHP5 too...


author: Warren Togami <wtogami@redhat.com> 1.4.4-2
changelog:
  - 1.4.4
  - re-include translations and Provide squirrelmail-i18n
    better compatible with upstream, but we cannot split sub-package
    due to support of existing distributions
  - remove unnecessary .po files


author: Warren Togami <wtogami@redhat.com> 1.4.3a-5
changelog:
  - default_folder_prefix dovecot compatible by default
    /etc/squirrelmail/config_local.php if you must change it


author: Warren Togami <wtogami@redhat.com> 1.4.3a-4
changelog:
  - HIGASHIYAMA Masato's patch to improve Japanese support
    (coordinated by Scott A. Hughes).
  - real 1.4.3a tarball


author: Warren Togami <wtogami@redhat.com> 1.4.3-2
changelog:
  - #125638 config_local.php and default_pref in /etc/squirrelmail/
    to match upstream RPM.  This should allow smoother drop-in
    replacements and upgrades.
  - other spec cleanup.


author: Gary Benson <gbenson@redhat.com> 1.2.10-4
changelog:
  - fix syntax error in download.php (#82600).
  - resized splash screen to be the same size as the one it replaces
    (#82790)
  - remove piece of squirrelmail-1.2.10-xss.patch that changed the
    version from '1.2.10' to '1.2.11 [cvs]'


author: Gary Benson <gbenson@redhat.com> 1.2.7-3
changelog:
  - get rid of long lines in the specfile.
  - remove symlink in docroot and use an alias in conf.d instead.
  - work with register_globals off (#68669)


author: Gary Benson <gbenson@redhat.com> 1.2.7-1
changelog:
  - hardwire the locations into the config file and cron file.
  - install squirrelmail-cleanup.cron as squirrelmail.cron.
  - make symlinks relative.
  - upgrade to 1.2.7.
  - more dependency fixes.


author: Gary Benson <gbenson@redhat.com>
changelog:
  - summarize the summary, fix deps, and remove some redundant stuff.
  - tidy up the prep section.
  - replace directory definitions with standard RHL ones.


author: Karsten Hopp <karsten@redhat.de> 1.10-24
changelog:
  - added development manpages
  - as there are no manpages for the executables available, added at least
    a FAQ (#172324)


author: Mike A. Harris <mharris@redhat.com> 1.10-13
changelog:
  - Removed %name macro sillyness from package Summary, description text, etc.
  - Removed archaic Prefix: tag
  - lib64 fixes everywhere to use _lib, _libdir, etc
  - Removed deletion of RPM_BUILD_DIR from %clean section
  - Added -q flag to setup macro
  - Severely cleaned up spec file, and removed usage of perl


author: Jakub Jelinek <jakub@redhat.com> 1.10-12
changelog:
  - CFLAGS was using COPTFLAG variable, not COPTFLAGS
  - build with -fpic
  - apply the IA-64 patch everywhere, use capget/capset from glibc,
    not directly as _syscall (as it is broken on IA-32 with -fpic)
  - reenable alpha


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.10-6
changelog:
  - Fix sys/capabilities.h header (#55727)
  - Move to /lib, some applications seem to be using this rather early
    (#55733)


author: Mike A. Harris <mharris@redhat.com> 1.0.2-1
changelog:
  - Update to util-macros-1.0.2 from X11R7.1
  - Added COPYING, ChangeLog to file manifest.
  - Use "make install" instead of makeinstall macro.
  - Use setup -n instead of setup -c


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Update to util-macros-0.99.1 from the X11R7 RC1 release.
  - Disable debuginfo package creation, as there are no ELF objects present.
  - Add xorg-macros.m4 to file list.


author: Lon Hohberger <lhh@redhat.com> 3.0-2.1
changelog:
  - Fix /etc/joe/joe/* sysconf dirs; the new Makefile.am handles this for us.
  - Ensure we reference correct directories in manpages and joe-configs.


author: Lon Hohberger <lhh@redhat.com> 3.0-1
changelog:
  - Import of 3.0 upstream.
  - Removed zero-rc patch for now; it doesn't correctly fix the
    problem.
  - Merge new SELinux patch from Dan Walsh.


author: Dan Walsh <lhh@redhat.com> 2.9.8-8
changelog:
  - Modify SELinux patch to only attempt change if the context is different
  - Change is_selinux_enabled to >0 check.


author: Lon Hohberger <lhh@redhat.com> 2.9.8-2
changelog:
  - Import from 2.9.8 upstream.  This eliminates most of the patches
  we maintained.  Added patch from #80657 from Hans de Goede.


author: Lon Hohberger <lhh@redhat.com> 2.9.7-8
changelog:
  - Cleaned up warnings on ppc/ia32/ia64.
  - Fixed help message.
  - Fixed bugs on ia64 and ppc architectures.
  - Fixed build bugs on ia64.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 2.9.6 - someone's developing it again, on sourceforge
  - all patches absorbed or unnecesarry
  - add doc files and URL
  - use %configure and %makeinstall


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - added new patch for supporting big files (15+ MB). 
  - obsoleted one of our which is contained within the
    above patch


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - added new patch for resizing, by Seth Vidal
  - removed an old patch which did almost the same thing, 
    but not as well


author: Jakub Jelinek <jakub@redhat.com> 4.1.4-10.el5
changelog:
  - make sure libmpfr.a doesn't contain SSE2 instructions on i?86 (#223038)
  - rebase to mpfr 2.2.1 from 2.2.0 + cumulative fixes


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - enable mpfr  #104395
  - enable cxx  #80195
  - add COPYING.LIB
  - add fixes from gmp web-site
  - remove some cruft patches for older libtool releases


author: Trond Eivind Glomsrød <teg@redhat.com> 4.1-3
changelog:
  - Redefine the configure macro, the included configure 
    script isn't happy about the rpm default one (#68190). Also, make
    sure the included libtool isn't replaced,


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed bugzilla bug #25515 where GMP wouldn't work on IA64 as IA64 is not
  correctly identified as a 64 bit platform.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - switch to the configure and makeinstall macros
  - FHS-compliance fixing
  - move docs to non-devel package


author: Jakub Jelinek <jj@ultra.linux.cz>
changelog:
  - merge in some debian gmp fixes
  - Ulrich Drepper's __gmp_scale2 fix
  - my mpf_set_q fix
  - sparc64 fixes


author: Michael Johnson <johnsonm@redhat.com>
changelog:
  - include the private header file gmp-mparam.h because several
    apps seem to assume that they are building against the gmp
    source tree and require it.  Sigh.


author: Marc Ewing <marc@redhat.com>
changelog:
  - started with package from Toshio Kuratomi <toshiok@cats.ucsc.edu>
  - cleaned up file list
  - fixed up install-info support


author: Than Ngo <than@redhat.com> 3.2.4-14
changelog:
  - fix #191825, buildrequire on imake
  - fix #173748, fig2dev still refers to /usr/X11R6/lib/X11/rgb.txt


author: Miloslav Trmac <mitr@redhat.com> - 1:3.2.4-8
changelog:
  - Fix at least a few obvious instances of C abuse (partly #74594 with patch by
    Sysoltsev Slawa)
  - Drop -Dcfree=free fix, not needed with current version


author: Alexander Larsson <alexl@redhat.com> 2.1.90-2
changelog:
  - Run libtoolize to make package rebuilding possible 
    without the package already installed (#78045)


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - improved the chat mode fix to allow specifying the remotename
    so that multiple wvdial instances can't step on each other.


author: Mike A. Harris <mharris@redhat.com> 1.1.1.2-1
changelog:
  - Updated xorg-x11-drv-tdfx to version 1.1.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for tdfx video driver generated automatically
    by my xorg-driverspecgen script.


author: Peter Vrabec <pvrabec@redhat.com> - 0.7.3-3
changelog:
  - fix source url
  - move postun to preun, mainly because of install-info
  - add pinentry-gtk-2 entry into gtk files section


author: Ville Skyttä <ville.skytta at iki.fi> - 0.7.2-1
changelog:
  - 0.7.2, docs patch applied upstream.
  - Switch to GTK2 in -gtk.
  - Fine tune dependencies.
  - Build with dependency tracking disabled.
  - Clean up obsolete pre-FC2 support.


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.6.9-0.fdr.1
changelog:
  - Update to 0.6.9.
  - Smoother experience with --excludedocs.
  - Don't change alternative priorities on upgrade.


author: David Malcolm <dmalcolm@redhat.com> - 2.2.5-1
changelog:
  - 2.2.5
  - Removed gnome-bug-306877-soup-connection-ntlm.c.patch (#160071) as this is 
    now in upstream tarball


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-1
changelog:
  - update from 2.2.1 to 2.2.2
  - add explicit devel requirements on glib2-devel, pkgconfig, gtk-doc, gnutls-devel and libxml2-devel


author: Jeremy Katz <katzj@redhat.com> 1.99.17-1
changelog:
  - rename package to libsoup
  - update to 1.99.17
  - don't obsolete soup for now, it's parallel installable


author: Jeremy Katz <katzj@redhat.com> 0.7.9-3
changelog:
  - better lib64 patch
  - fix building of libwsdl-build to use libtool so that it gets built 
    with -fPIC as needed


author: Jeremy Katz <katzj@redhat.com> 0.7.4-3
changelog:
  - fix to not try to include non-existent doc files and remove all 
    unwanted files from the build
  - include api docs 
  - don't build the apache module


author: Ondrej Vasik <ovasik@redhat.com> - 2.4.0-3
changelog:
  - added /usr/src/debug, /usr/src/kernels (#487568)
  - added several /usr/share/locale dirs (#487568)
  - added /usr/share/man{0,1,3]p to owned files (#487568)
  - added ownership for /usr/share/man/<locale>/man<xy> (#487568)
  - added URL, project on fedorahosted


author: Phil Knirsch <pknirsch@redhat.com> - 2.3.7-2
changelog:
  - Fixed games location according to FHS 2.1 (#165425)
  - Added {_libdir}/sse2 to owned files (#192853)
  - Added /dev to owned files (#192860)
  - Added {_datadir}/icons to owned files (#195911)
  - Dropped obsolete /etc/X11/starthere (#191163)


author: Bill Nottingham <notting@redhat.com> 2.2.3-1
changelog:
  - move /usr/dict to /usr/share/dict (#113645)
  - add /usr/lib/locale, /var/empty (#108686,#113036)
  - add */%{_lib}/tls (#113050)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - /etc/opt, /usr/share/{info,man/man*,misc,doc} (FHS 2.1)
  - added /var/games.  Data should move from /var/lib/games to there (FHS 2.1)
  - bump version up to 2.0 already!


author: Erik Troan <ewt@redhat.com>
changelog:
  - added /var/db
  - set attributes in the spec file; don't depend on the ones in the cpio
    archive
  - use a tarball instead of a cpioball


author: Phil Knirsch <pknirsch@redhat.com> 0.4.6-2.fc7
changelog:
  - Several fixes due to Fedora package review:
   o Fixed Group for all subpackages
   o Added missng Requires(Post|Preun) for several packages
   o Removed static libraries and .la files
   o Fixed open bug (missing mode for O_CREATE)
   o Fixed incorrect options for bmc-watchdog daemon


author: Phil Knirsch <pknirsch@redhat.com> 0.4.6-1.fc7
changelog:
  - Specfile cleanup for Fedora inclusion
  - Fixed several rpmlint warnings and errors:
   o Moved all devel libs to proper package


author: Ivana Varekova <varekova@redhat.com> - 6.3.2-44
changelog:
  - Resolves: #291531
    fix log file permission
  - Resolves: #232163
    service psacct status returns the right value
  - Resolves: #447028
    Logrotate of psacct will restart accounting even if 
    the service was stopped


author: Charles Bennett <ccb@redhat.com> 6.3.2-33.fc4
changelog:
  - rhbz 133077: logrotate fixed to continue accounting during rotate
  - rhbz 141802: lastcomm was not handling all forms of --strict-match
  - rhbz 141971: rpm -e no longer leaves /var/lock/subsys/psacct
  - rhbz 43294: sa will never report any io because the kernel doesn't
     provide it.  Tweaked to ignore ac_io in acct.h
  - integrate lastcomm hz patch from RH support


author: Mike A. Harris <mharris@redhat.com> 6.3.2-25
changelog:
  - Added with_last conditional to disable /usr/bin/last because ours is in
    the SysVInit package.  This fixes unpackaged files terminate build prob.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-24
changelog:
  - Fixed initscript reload/restart by creating start/stop functions and
    making everything use them (#72261)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-23
changelog:
  - Fixed chkconfig issue in rpm scripts (#61191)
  - Excludearch ia64, not taking the time to debug/troubleshoot random
    buildsystem failure due to higher priorities.


author: Elliot Lee <sopwith@redhat.com>
changelog:
  - Take the time to make sure things get through on all archs, by simply
    running it through the build system.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-19
changelog:
  - Made initscript touch/chmod accounting file if it is not present during
    startup, to ensure accounting works properly when enabled.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-17
changelog:
  - Removed the files usracct and savacct, which are not used by psacct
    utilities at all, but by the sa program.  Our sa uses files in a different
    location, and so these files are unused and unnecessary.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-15
changelog:
  - Added new feature - psacct initscript now controls process accounting so
    that it is not just forced on if installed as was the previous behaviour
  - Modified the initscripts package to not force psacct on anymore and made
    the new psacct-6.3.2-15 conflict with previous initscripts packages.
  - Fixed logrotate config to set perms/owner of new log files, and closed
    bug (#54165)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-13
changelog:
  - Removed Build_7x flag, added FHS_compliant flag, reworked specfile to use new
    flag, and fixed bug (#60716)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-11
changelog:
  - Conditionalized acct-6.3.2-config.patch to only be applied for RHL 7.x
    builds, as it breaks FHS compliance by putting files in nonstandard
    locations.  Also fixed up other places in specfile for FHS 2.2.
  - Added acct-6.3.2-I-HATE-GNU-AUTOCONK.patch because I hate GNU autoconk
    really really badly.
    
  - Bumped to -11 to avoid buildsystem stupidness


author: Mike A. Harris <mharris@redhat.com> 6.3.2-9
changelog:
  - Fixed bug (#53307) psacct is enabled by default, and the log files
    are huge, and will fill the disk up very quickly.  logrotate will
    now compress them daily.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-7
changelog:
  - Change spec tag Copyright -> License
  - change logrotate to rotate daily, and keep 1 month (31 days) of data


author: Mike A. Harris <mharris@redhat.com> 1.0.0-3
changelog:
  - Added "Requires: xorg-x11-proto-devel" to devel package.
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 0.99.3-1
changelog:
  - Updated libFS to version 0.99.3 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libFS to version 0.99.2 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-4
changelog:
  - try to SIGHUP the messagebus daemon at first install so that it'll
    let us claim our service name if it isn't restarted before we are
    first started (#636893)


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-1
changelog:
  - update to 0.30
    - fix errors computing the time at the end of an interval that were
      caught by self-tests


author: Nalin Dahyabhai <nalin@redhat.com> 0.29-1
changelog:
  - update to 0.29
    - fix 64-bit cleanliness issue using libdbus
    - actually include the full set of tests in tarballs


author: Nalin Dahyabhai <nalin@redhat.com> 0.28-1
changelog:
  - update to 0.28
    - fix self-signing certificate notBefore and notAfter values on 32-bit
      machines


author: Nalin Dahyabhai <nalin@redhat.com> 0.26-1
changelog:
  - update to 0.26
    - when canceling a submission request that's being handled by a helper,
      reap the child process's status after killing it (#624120)


author: Nalin Dahyabhai <nalin@redhat.com> 0.25-1
changelog:
  - update to 0.25
    - new translations
      - in by Okta Purnama Rahadian!
    - fix detection of cases where we can't access a private key in an NSS
      database because we don't have the PIN
    - teach '*getcert start-tracking' about the -p and -P options which the
      '*getcert request' commands already understand (#621670), and also
      the -U, -K, -E, and -D flags
    - double-check that the nicknames of keys we get back from
      PK11_ListPrivKeysInSlot() match the desired nickname before accepting
      them as matches, so that our tests won't all blow up on EL5
    - fix dynamic addition and removal of CAs implemented through helpers


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-4
changelog:
  - init script: ensure that the subsys lock is created whenever we're called to
    "start" when we're already running (even more of #596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-3
changelog:
  - more gracefully handle manual daemon startups and cleaning up of unexpected
    crashes (still more of #596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-2
changelog:
  - don't create the daemon pidfile until after we've connected to the D-Bus
    (still more of #596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-1
changelog:
  - update to 0.24
    - keep the lock on the pid file, if we have one, when we fork, and cancel
      daemon startup if we can't gain ownership of the lock (the rest of #596719)
    - make the man pages note which external configuration files we consult when
      submitting requests to certmaster and ipa CAs


author: Nalin Dahyabhai <nalin@redhat.com> 0.23-1
changelog:
  - update to 0.23
    - new translations
      - pl by Piotr Drąg!
    - cancel daemon startup if we can't gain ownership of our well-known
      service name on the DBus (#596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.22-1
changelog:
  - update to 0.22
    - new translations
      - de by Fabian Affolter!
    - certmaster-submit: don't fall over when we can't find a certmaster.conf
      or a minion.conf (i.e., certmaster isn't installed) (#588932)
    - when reading extension values from certificates, prune out duplicate
      principal names, email addresses, and hostnames


author: Nalin Dahyabhai <nalin@redhat.com> 0.21-1
changelog:
  - update to 0.21
    - getcert/*-getcert: relay the desired CA to the local service, whether
      specified on the command line (in getcert) or as a built-in hard-wired
      default (in *-getcert) (#584983)
    - flesh out the default certmonger.conf so that people can get a feel for
      the expected formatting (Jenny Galipeau)


author: Nalin Dahyabhai <nalin@redhat.com> 0.20-1
changelog:
  - update to 0.20
    - correctly parse certificate validity periods given in years (spotted by
      Stephen Gallagher)
    - setup for translation
      - es by Héctor Daniel Cabrera!
      - ru by Yulia Poyarkova!
      - uk by Yuri Chornoivan!
    - fix unpreprocessed defaults in certmonger.conf's man page
    - tweak the IPA-specific message that indicates a principal name also needs
      to be specified if we're not using the default subject name (#579542)
    - make the validity period of self-signed certificates into a configuration
      setting and not a piece of the state information we track about the signer
    - init script: exit with status 2 instead of 1 when invoked with an
      unrecognized argument (#584517)


author: Nalin Dahyabhai <nalin@redhat.com> 0.19-1
changelog:
  - update to 0.19
    - correctly initialize NSS databases that need to be using a PIN
    - add certmonger.conf, for customizing notification timings and settings,
      and use of digests other than the previously-hard-coded SHA256, and
      drop those settings from individual requests
    - up the default self-sign validity interval from 30 days to 365 days
    - drop the first default notification interval from 30 days to 28 days
      (these two combined to create a fun always-reissuing loop earlier)
    - record the token which contains the key or certificate when we're
      storing them in an NSS database, and report it
    - improve handling of cases where we're supposed to use a PIN but we
      either don't have one or we have the wrong one
    - teach getcert to accept a PIN file's name or a PIN value when adding
      a new entry
    - update the IPA submission helper to use the new 'request_cert' signature
      that's landing soon
    - more tests


author: Nalin Dahyabhai <nalin@redhat.com> 0.18-1
changelog:
  - update to 0.18
    - add support for using encrypted storage for keys, using PIN values
      supplied directly or read from files whose names are supplied
    - don't choke on NSS database locations that use the "sql:" or "dbm:"
      prefix


author: Nalin Dahyabhai <nalin@redhat.com> 0.17-2
changelog:
  - make the D-Bus configuration file (noreplace) (#541072)
  - make the %check section and the deps we have just for it conditional on
    the same macro (#541072)


author: Nalin Dahyabhai <nalin@redhat.com> 0.17-1
changelog:
  - update to 0.17
    - fix a hang in the daemon (Rob Crittenden)
    - documentation updates
    - fix parsing of submission results from IPA (Rob Crittenden)


author: Nalin Dahyabhai <nalin@redhat.com> 0.15-1
changelog:
  - update to 0.15
    - notice that a directory with a trailing '/' is the same location as the
      directory without it
    - fix handling of the pid file when we write one (by actually giving it
      contents)


author: Nalin Dahyabhai <nalin@redhat.com> 0.14-1
changelog:
  - update to 0.14
    - check key and certificate location at add-time to make sure they're
      absolute paths to files or directories, as appropriate
    - IPA: dig into the 'result' item if the named result value we're looking
      for isn't in the result struct


author: Nalin Dahyabhai <nalin@redhat.com> 0.13-1
changelog:
  - update to 0.13
    - change the default so that we default to trying to auto-refresh
      certificates unless told otherwise
    - preemptively enforce limitations on request nicknames so that they
      make valid D-Bus object path components


author: Nalin Dahyabhai <nalin@redhat.com> 0.12-1
changelog:
  - update to 0.12
    - add a crucial bit of error reporting when CAs reject our requests
    - count the number of configured CAs correctly


author: Nalin Dahyabhai <nalin@redhat.com> 0.11-1
changelog:
  - update to 0.11
    - add XML-RPC submission for certmaster and IPA
    - prune entries with duplicate names from the data store


author: Nalin Dahyabhai <nalin@redhat.com> 0.9-1
changelog:
  - update to 0.9
    - run external submission helpers correctly
    - fix signing of signing requests generated for keys stored in files
    - only care about new interface and route notifications from netlink,
      and ignore notifications that don't come from pid 0
    - fix logic for determining expiration status
    - correct the version number in self-signed certificates


author: Nalin Dahyabhai <nalin@redhat.com> 0.8-1
changelog:
  - update to 0.8
    - encode windows UPN values in requests correctly
    - watch for netlink routing changes and restart stalled submission requests
    - 'getcert resubmit' can force a regeneration of the CSR and submission


author: Nalin Dahyabhai <nalin@redhat.com> 0.7-1
changelog:
  - update to 0.7
    - first cut at a getting-started document
    - refactor some internal key handling with NSS
    - check for duplicate request nicknames at add-time


author: Nalin Dahyabhai <nalin@redhat.com> 0.6-1
changelog:
  - update to 0.6
    - man pages
    - 'getcert stop-tracking' actually makes the server forget now
    - 'getcert request -e' was redundant, dropped the -e option
    - 'getcert request -i' now sets the request nickname
    - 'getcert start-tracking -i' now sets the request nickname


author: Nalin Dahyabhai <nalin@redhat.com> 0.5-1
changelog:
  - update to 0.5
    - packaging fixes
    - add a selfsign-getcert client
    - self-signed certs now get basic constraints and their own serial numbers
    - accept id-ms-kp-sc-logon as a named EKU value in a request


author: Peter Jones <pjones@redhat.com> alpha9.8-23
changelog:
  - "This time, with a meaningful changelog" release.  Just like -22.
  - new SG_IO code in rawhide.  This means ripping will no longer use the 
    "cooked ioctl" mode that it has since we moved to 2.6, instead utilizing
    the real scsi-based command set to talk to most drives.  This should
    result in better error correction handling, and usage of much more
    commonly used kernel features.
  - environment variable "CDDA_TRANSPORT" added.  If you set this to "cooked",
    cdparanoia will try to use the "cooked ioctl" mode instead of SCSI/SG_IO
    based modes first, and then fall back to SG_IO.
  - It'd be good if this got some testing.  A prior version of the SG_IO code
    was known to fail on some USB drives.  This version should mitigate that
    quite a bit, but I lack the hardware to test it for sure.


author: Peter Jones <pjones@redhat.com> alpha9.8-5
changelog:
  - make a -libs package which contains the .so files
  - make the cdparanoia dependancy towards that, not -devel


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Switched spec file from the one used in Red Hat Linux 6.2, which
    also changes the name
  - gzip man page


author: Peter Jones <pjones@redhat.com>
changelog:
  - update package to provide cdparanoia-alpha9.7-2.*.rpm and 
    cdparanoia-devel-alpha9.7-2.*.rpm.  Also, URLs point at xiph.org
    like they should.


author: Peter Jones <pjones@redhat.com>
changelog:
  - updated package for alpha9.7, based on input from:
    Monty <xiphmont@xiph.org> 
    David Philippi <david@torangan.saar.de>


author: Warren Togami <wtogami@redhat.com> - 2.6.0-3
changelog:
  - #111008 fixes
    Fixes from Ville Skyttä
      Bad file permissions
      Unknown directories
      %doc fixes
    Fixes from Toshio Kuratomi
      Update the BuildRequires
      Changed BuildRequires on gnome-panel to gnome-panel-devel
      Add Requires for python-abi


author: Jeremy Katz <katzj@redhat.com> 1.99.16-1
changelog:
  - update to 1.99.16
  - add gnomeprint subpackage
  - don't double include the gnome-vfs module (#102074)


author: Matt Wilson <msw@redhat.com>
changelog:
  - doesn't obsolete pygnome - it can be installed side-by-side
  - added _gnomemodule.so to base package filelist


author: Mark McLoughlin <markmc@redhat.com> 2.6.0.1-3
changelog:
  - Patch from upstream which fixes a nasty viewport issue obvious when
    using it with sawfish (#120652)


author: Matt Wilson <msw@redhat.com> 2.2.1-3
changelog:
  - make sure that _NET_DECKTOP_LAYOUT is only 4 elements.  Using
    "sizeof (data) / 4" results in 8 elements being set on 64 bit
    platforms.  Just use "4" instead. (#87951)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 0.17 allows clicking a task to minimize it, and DND over a task to
    switch to it, adds translations, and fixes a couple crash things in
    the accessibility stuff.


author: Matthew Barnes <mbarnes@redhat.com> - 2.15.1-2
changelog:
  - Add build requirements: startup-notification-devel
                            libgnomeprintui22-devel
                            libXt-devel


author: David Malcolm <dmalcolm@redhat.com> - 2.13.2-2
changelog:
  - Patched to include DocBook mimetype in desktop file, and added preun and post
    hooks to update-desktop-database (#175880)
  - Patched to ensure that Yelp recognizes that it can handle the mimetype of the
    documentation as reported by gnomevfs (also #175880)


author: Ray Strode <rstrode@redhat.com> 2.9.3-6
changelog:
  - Disable man support
  - Disable info support
  - Don't try to install schemas during install (bug 154035)


author: Jason Vas Dias <jvdias@redhat.com> - 1:0.17-31
changelog:
  - bug 143929 / 145004 : fix race condition in telnetd on wtmp lock 
  - when cleanup() is entered from main process and in signal
  - handler


author: Harald Hoyer <harald@redhat.de>
changelog:
  - fixed security issues (#50335)
  - patched the patches to fit the 5x version
  - one world -> one spec file for all versions ;)


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - update to 0.17
  - apply latest changes from CVS to telnet client, enable IPv6
  - BuildPreReq ncurses-devel


author: Antti Andreimann <Antti.Andreimann@mail.ee>
changelog:
  - fixed the problem with escape character (it could not be disabled)
  - changed the spec file to use %setup macro for unpacking telnet-client


author: Karsten Hopp <karsten@redhat.de> 1.10-2
changelog:
  - update to wget-1.10
    - drop passive-ftp patch, already in 1.10
    - drop CVS patch
    - drop LFS patch, similar fix in 1.10
    - drop protdir patch, similar fix in 1.10
    - drop actime patch, already in 1.10


author: Karsten Hopp <karsten@redhat.de> 1.9.1-20
changelog:
  - texi2pod doesn't handle texinfo xref's. rewrite some lines so that
    the man page doesn't have incomplete sentences anymore (#140470)


author: Karsten Hopp <karsten@redhat.de> 1.9.1-19
changelog:
  - Don't set actime to access time of the remote file or tmpwatch might 
    remove the file again (#146440).  Set it to the current time instead.
    timestamping checks only modtime, so this should be ok.


author: Karsten Hopp <karsten@redhat.de> 1.9.1-18
changelog:
  - add support for --protocol-directories option as documented
    in the man page (Ville Skyttä, #145571)


author: Karsten Hopp <karsten@redhat.de> 1.9.1-7
changelog:
  - clean up manpage (#117519)
  - buildrequire texinfo (#123780)
  - LFS patch, based on wget-LFS-20040630.patch from Leonid Petrov
    (#123524, #124628, #115348)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 1.7
  - Require perl for building (to get man pages)
  - Don't include the Japanese po file, it's now included
  - Use %{_tmppath}
  - no patches necessary
  - Make /etc/wgetrc noreplace
  - More docs


author: Bill Nottingham <notting@redhat.com>
changelog:
  - setlocale for LC_CTYPE too, or else all the translations think their
    characters are unprintable.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - upgraded to 1.5.0
  - they removed the man page from the distribution (Duh!) and I added it back
    from 1.4.5. Hey, removing the man page is DUMB!


author: James Antill <jantill@redhat.com> - 4.2.6-3
changelog:
  - Fix reused pids bug
  - Resolves: rhbz#465455
  - Fix comments in $() edge case syntax parsing error
  - Resolves: rhbz#484348


author: Colin Walters <walters@redhat.com> - 4.2.1-1
changelog:
  - New upstream version 4.2.1
  - FEATURES, MACHINES, and NEWS moved to toplevel dir
  - Update zsh-4.0.6-make-test-fail.patch, but do not apply it for now
  - Remove upstreamed zsh-4.2.0-jobtable-125452.patch


author: Jens Petersen <petersen@redhat.com> - 4.2.0-3
changelog:
  - source profile in zprofile rather than .zshrc (Péter Kelemen,
    Magnus Gustavsson, 102187,126539)
  - add zsh-4.2.0-jobtable-125452.patch to fix job table bug
    (Henrique Martins, 125452)
  - buildrequire tetex for texi2html (Maxim Dzumanenko, 124182)


author: Jens Petersen <petersen@redhat.com> - 4.2.0-1
changelog:
  - update to 4.2.0 stable release
  - zsh-4.0.7-bckgrnd-bld-102042.patch no longer needed
  - add compinit and various commented config improvements to .zshrc
    (Eric Hattemer,#114887)
  - include zshprompt.pl in doc dir (Eric Hattemer)
  - drop setenv function from zshrc


author: Jens Petersen <petersen@redhat.com> - 4.0.9-1
changelog:
  - update to 4.0.9 release
  - zsh-4.0.7-completion-_files-110852.patch no longer needed
  - update zsh-4.0.7-bckgrnd-bld-102042.patch to better one with --with-tcsetpgrp
    configure option by Philippe Troin
  - configure --with-tcsetpgrp
  - buildrequire texinfo for makeinfo
  - fix ownership of html manual (Florian La Roche, #112749)


author: Jens Petersen <petersen@redhat.com> - 4.0.7-2
changelog:
  - quote % in file glob'ing completion code (#110852)
    [reported with patch by Keith T. Garner]
  - add zsh-4.0.7-bckgrnd-bld-102042.patch from Philippe Troin to allow
    configure to run in the background (#102042) [reported by Michael Redinger]
  - above patch requires autoconf to be run
  - include html manual in separate -html subpackage
  - changed url to master site
  - skip completion tests on ppc and ppc64 for now, since they hang


author: Jens Petersen <petersen@redhat.com> - 4.0.6-7
changelog:
  - don't set stty erase in a dumb terminal with tput kbs in /etc/zshrc (#89856)
    [reported by Ben Liblit]
  - make default prompt more informative, like bash


author: Jens Petersen <petersen@redhat.com>
changelog:
  - 4.0.6
  - add url
  - add --without check build option
  - don't autoconf
  - make "make test" failure not go ignored
  - move sourcing of profile from zshenv to new .zshrc file for now (#65509)
  - preserve dates when installing rc files


author: Trond Eivind Glomsrød <teg@redhat.com> 4.0.4-5
changelog:
  - Source /etc/profile from /etc/zshenv instead of /etc/zprofile, 
    to run things the same way bash do (#62788)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Remove contents from /etc/zshenv file - no reason to duplicate things
    from /etc/profile, which is sourced from /etc/zprofile (#32478)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fix the post script, so we only have only line for zsh
    and can remove the trigger
  - get rid of some instances of "/usr/local/bin/zsh"


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 3.0.8
  - use %configure and %makeinstall
  - updated URL
  - disable old patches
  - add better patch for texi source
  - use %{_mandir} and %{_infodir}
  - use %{_tmppath}


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - fix postun script so that we don't remove ourselves on every update
    doh...
  - add a trigger to fix old versions of the package


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - auto rebuild in the new build environment (release 10)
  - fix the texi source
  - patch to detect & link against nsl


author: Jindrich Novy <jnovy@redhat.com> 10.35.58-7.el5
changelog:
  - rebase to 10.35.58 (#479017)
  - fix ppmfade, ppmrainbow
  - fix doublefree corruption and couple of memleaks in pnmtofiasco
  - fix cmuwmtopbm and other utilities by making endianess
    functions work correctly on 64bit systems (#476863)
  - fix ppmdfont and ppmddumpfont and svgtopam (thanks to Jiri Moskovcak)
  - add BR: ghostscript
  - use correct macro arguments (#246707)
  - fix segfault in ximtoppm (#482867)
  - fix options in pamperspective, pbmtoepson, ppmpat, pamaddnoise,
    cameratopam, fiascotopnm so that they match their man pages
    (#483011, #483070, #483243, #483245, #482829, #482839)
  Resolves: #246707, #479017, #476864, #476867, #483011, #483070
  Resolves: #483243, #483245, #482867, #482829, #482839


author: Jindrich Novy <jnovy@redhat.com> 10.35-1
changelog:
  - update to 10.35
  - drop .pnmtopng, .rgbtxt patches, fixed upstream
  - sync .xwidfix, .ppmtompeg patches
  - regenerate man pages


author: Jindrich Novy <jnovy@redhat.com> 10.34-8
changelog:
  - readd pbmtols, author claims it's LGPL (#202519)
  - add .l1 suffixes to tarball names to reflect legal fixes
    in the upstream release with the same NVR


author: Jindrich Novy <jnovy@redhat.com> 10.34-6.fc6
changelog:
  - regenerate man pages so that makewhatis isn't confused (#204991)
    (upstream makeman script was broken -> now fixed)


author: Jindrich Novy <jnovy@redhat.com> 10.34-4.fc6
changelog:
  - legal fixes (#202519):
  - remove pbmtols, spottopgm, jbig and hpcd stuff from source
    and doc tarballs


author: Jindrich Novy <jnovy@redhat.com> 10.34-3.fc6
changelog:
  - pamscale won't waste all system resources by usage of uninitialized
    variables for output image resolution (#199871)
  - use %{?dist}


author: Jindrich Novy <jnovy@redhat.com> 10.34-1
changelog:
  - update to 10.34
  - drop .ppmtogif, .nstring patches
  - remove some overflow checks from .security patch, it's
    now resolved in the new upstream version
  - don't use svgalib by default (don't compile/ship ppmsvgalib)
  - don't compile svgtopam because of the libxml dependency
  - add BuildRequires libX11-devel
  - fix build on x86_64 and ppc64


author: Jindrich Novy <jnovy@redhat.com> 10.33-2
changelog:
  - fix image corruption in ppmtogif, thanks to Gilles Detillieux (#188597)
  - fix nsting.h to let pnmtopng and other utilities using seekable opening
    mode work on x86_64 (#188594)


author: Jindrich Novy <jnovy@redhat.com> 10.33-1
changelog:
  - update to 10.33
  - drop upstreamed .ppmdepth patch
  - fix segfault in ppmtompeg when encoding jpeg images (#185970)


author: Jindrich Novy <jnovy@redhat.com> 10.32-1
changelog:
  - update to 10.32
  - drop .msbmp patch, applied upstream
  - sync the rest of the patches
  - regenerate man pages


author: Jindrich Novy <jnovy@redhat.com> 10.31-3
changelog:
  - fix segfault caused by usage of uninitialized variables while
    parsing cmdline arguments in pnmtopng (#179645)
  - add validity check for date/time in pnmtopng
  - fix unchecked sscanf reads


author: Jindrich Novy <jnovy@redhat.com> 10.30-1
changelog:
  - update to 10.30
  - update manpath, gcc4 patches
  - update security patch - fixed length problem in rle_addhist
  - update partly upstreamed bmptopnm, pnmtopng patches
  - drop manpath patch
  - regenerate man pages


author: Jindrich Novy <jnovy@redhat.com> 10.29-1
changelog:
  - update to 10.29
  - drop upstreamed .libpm, .pnmtojpeg, .pbmtolj patches
  - update .CAN-2005-2471 patch


author: Jindrich Novy <jnovy@redhat.com> 10.28-2
changelog:
  - fix segfault in pbmtolj caused by unchecked assertions
    caused by definition of NDEBUG (#160429)
  - drop hunk from .security patch causing dual inclusion
    of string.h in pbmtolj.c


author: Jindrich Novy <jnovy@redhat.com> 10.28-1
changelog:
  - update to 10.28
  - regenerated man pages
  - sync .security, .security2, .badlink, .libpm, .gcc4 patches
  - drop upstreamed .pngtopnm, .pnmcolormap patches


author: Jindrich Novy <jnovy@redhat.com> 10.27-2
changelog:
  - fix invalid strcmp condition in bmptopnm, typo in pnmtojpeg
    (David Constanzo, #157106, #157118)
  - proper read longs and shorts in libpm.c (David Constanzo, #157110)
  - fix segfault in bmptopnm caused by freeing an uninitialized pointer


author: Jindrich Novy <jnovy@redhat.com> 10.27-1
changelog:
  - update to the new 10.27 release
  - update .security2, .security patch
  - regenerate man pages
  - remove jbig, hpcd
  - remove config_template from /usr
  - don't create symlink to pamtopnm


author: Jindrich Novy <jnovy@redhat.com> 10.26.4-3
changelog:
  - fix overflow checking of integers with incompatible endianess
    causing problems using xwdtopnm (#147790)


author: Jindrich Novy <jnovy@redhat.com> 10.26.4-2
changelog:
  - add .gcc4 patch to fix some missing declarations of headers,
    some pointer signedness mismatches, remove xmalloc2
  - rebuilt with gcc4


author: Jindrich Novy <jnovy@redhat.com> 10.26.4-1
changelog:
  - update to netpbm-10.26.4, remove jbig, hpcd
  - this version fixes #149924
  - regenerate man pages (don't include man pages without binaries - #146863)


author: Jindrich Novy <jnovy@redhat.com> 10.26-1
changelog:
  - update to netpbm-10.26-1, remove jbig, hpcd
  - regenerate man pages, remove man pages for non existent binaries
  - update security patch, additional fixes
  - drop upstreamed misc patch, merge malloc patch with security patch


author: Jindrich Novy <jnovy@redhat.com> 10.25-3
changelog:
  - include man pages in troff format, thanks to Michal Jaegerman (#136959)
  - drop bmpbpp patch, fixed upstream
  - remove pcdovtoppm, ppmsvgalib, vidtoppm man pages because binaries
    for them are not present (#136471)


author: Jindrich Novy <jnovy@redhat.com> 10.25-1
changelog:
  - update to latest upstream 10.25
  - drop initvar patch
  - update security, misc patch
  - add bmpbpp patch to use only appropriate bit depths for BMP (#135675)


author: Jindrich Novy <jnovy@redhat.com> 10.23-1
changelog:
  - updated to netpbm-10.23 upsteam (and removed jbig, hpcd)
  - $TMPDIR patch removed, obsolete
  - updated gcc34 patch
  - removed nestedfunc patch, already applied in upstream version
  - updated security patch to conform to 10.23 (mostly in ppmtompeg/frame.c)


author: Phil Knirsch <pknirsch@redhat.com> 10.22-2
changelog:
  - Fixed Zero byte allocation error in bmptopnm (#123169)
  - Honour the $TMPDIR in ppmfade (#117247)
  - Fixed nested function bug (#117377)
  - Fixed several uninitialized variables (#117377)


author: Phil Knirsch <pknirsch@redhat.com> 10.22-1
changelog:
  - Update to latest upstream version 10.22 (also for docs).
  - Removed jbig and hdcp code from tarball.


author: Phil Knirsch <pknirsch@redhat.com> 10.19-4
changelog:
  - Fixed several tmp vulnerabilities in scripts and apps. Based on Debian
    security fix for netpbm-9.24.


author: Phil Knirsch <pknirsch@redhat.com> 10.19-3
changelog:
  - Included doc tarball with manpages (#114755).
  - Fixed small manpage incorrectness (#84922).
  - Fixed message from giftopnm (#114756).


author: Phil Knirsch <pknirsch@redhat.com> 9.24-3
changelog:
  - Fixed a possible gcc compiler problem for inline struct parameters (#62181).
  - Added missing .map files to progs files selection (#61625).


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Updated to netpbm version 9.14
  - Removed pnmtotiff resize patch as it is now part of the original package
  - Removed pstopnm csh fix as it is now part of the original package
  - Removed asciitopgm memcpy fix as it is now part of the original package
  - Removed manpages patch as it is now part of the original package


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed bugzilla bug #19487 where asciitopgm dumped core on Alpha. Actually
    dumped core everywhere


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - update to 9.9
  - Due to patent infringement problems removed the jbig support from the tarball
    (pnm/jbig + Makefile changes) and created a new tarball


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 9.8
  - make sure shhopt.h is included in the -devel package (#19672)
  - rename shhopt.h to pbmshhopt.h because it's not the same as the normal
    shhopt.h that other things (like util-linux) expect


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move netpbm-progs to the Applications/Multimedia group
  - reintroduce patches from the old libgr package


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make sure all man pages are included (#9328)
  - fix pstopnm bomb when xres == yres (#9329)
  - add libjpeg and libz because libtiff now needs them


author: Michael Johnson <johnsonm@redhat.com>
changelog:
  - removed old png.h header file that was causing png utils to die
  - build png in build instead of install section...


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - altered install so that the package installs now even if a previous
    version was not installed on the system


author: Donnie Barnes <djb@redhat.com>
changelog:
  - changed copyright from "distributable" to "freeware"
  - added some missing scripts that existed in netpbm
  - added some binaries that weren't getting built
  - added patch to build tiff manipulation progs (requires libtiff)


author: Donnie Barnes <djb@redhat.com>
changelog:
  - updated to 2.0.13
  - dropped libjpeg and libtiff (those should come from home sources)
  - removed glibc patch (new version appears to have it!)
  - added i686 as a valid arch type to config.guess


author: Jens Petersen <petersen@redhat.com> - 0.4.5-7.el5
changelog:
  - add scim-bridge-0.4.5-shutdown-with-X-211260.patch backported from cvs
    to fix agent lingering after desktop sessions (#211260)


author: Jens Petersen <petersen@redhat.com> - 0.4.5-6.el5
changelog:
  - backport scim-bridge-0.4.6-compiz-focus-214149.patch to fix problem with
    preedit getting committed immediately (#214149)


author: Jens Petersen <petersen@redhat.com> - 0.4.5-4.el5
changelog:
  - add scim-bridge-0.4.5-many-client-events-209573.patch from cvs to stop
    crash with long scim-chewing input (Ryo Dairiki, #211262)
  - add scim-bridge-0.4.5-preedit-underline-attribute-208921.patch from cvs to
    avoid underlining of Hangul in preedit (Ryo Dairiki, #211261)


author: Jens Petersen <petersen@redhat.com> - 0.4.5-3
changelog:
  - add scim-bridge-0.4.5-key-event-order-206261.patch from cvs to fix modifiers
    problem with scim-sinhala (Ryo Dairiki, #206261)
  - make im module subpackages require scim-bridge = ver-rel instead of
    /usr/bin/scim-bridge (#207872)


author: Jens Petersen <petersen@redhat.com> - 0.4.2-1
changelog:
  - update to 0.4.2 release (fixes #204657, #204337)
  - rename gtkimm and qtimm subpackages to gtk and qt respectively
  - move gtkimm xinput.d script to gtk subpackage
  - add qtimm xinput.d script to qt subpackage
  - require scim >= 1.4.4-33.fc6


author: Jens Petersen <petersen@redhat.com> - 0.3.1-1
changelog:
  - update to 0.3.1 release
  - buildrequire qt-devel
  - disable building oxygen source documentation for now
  - include html docs


author: Jens Petersen <petersen@redhat.com> - 0.2.3-2
changelog:
  - update with fixes from cvs (#197719)
  - fix input state caching across desktop sessions (Ryo Dairiki, #197775)


author: Jens Petersen <petersen@redhat.com> - 0.2.0-1.1
changelog:
  - update to 0.2.0
  - add scim-bridge-0.2.0-agent-fixes.patch from cvs to fix trigger event
    handling and config reload problems (Ryo Dairiki)


author: Thomas Woerner <twoerner@redhat.com> 2.3.1-3
changelog:
  - fixed BadDrawable error (rhbz#557453)
  - fixed MultiList not displayed properly (mzbz#1453) (rhbz#568730)
  - fixed invisible insensitive labels, buttons, icons and list entries
    (mzbz#1381) (rhbz#568730)
  - fixed XmNaccelerator do not work with CapsLock/ScrollLock/NumLock
    modifiers (mzbz#345) (rhbz#492529)


author: Thomas Woerner <twoerner@redhat.com> 2.3.1-2
changelog:
  - more fixes for unreliable pasting into XmTextField (MotifZone bug #1321)
    Resolves: rhbz#405941
  - the fix for MotifZone bug #1400 is not working for remote displays


author: Thomas Woerner <twoerner@redhat.com> 2.3.1-0
changelog:
  - rebase to 2.3.1 (CVS dist release)
    Resolves: rhbz#455736
  - fixes OpenMotif XmList problem
    Resolves: rhbz#405801
  - fixes List.c/ReplaceItem() segfaults when item selected
    Resolves: rhbz#431460
  - fixes [motifzone 1400 ] openmotif/ BadFont on multiple display application
    Resolves: rhbz#438910
  - fixes applications dump core in non-UTF8 environment
    Resolves: rhbz#453722
  - fixes lots of additional bugs: see release notes


author: Thomas Woerner <twoerner@redhat.com> 2.3.0-0.5
changelog:
  - fixed SEGV error moving mouse over window related to XmToolTipGetLabel
    (MotifZone bug fix #1388)
    Resolves: rhbz#277381


author: Thomas Woerner <twoerner@redhat.com> 2.3.0-0.1.9
changelog:
  - new CVS version 2006-02-02
  - fixed CVE-2005-3964: libUil buffer overflows (#174814)
  - fixed XmList out of bound accesses (#167701)
  - fixed pasting into TextField (#179549)


author: Thomas Woerner <twoerner@redhat.com> 2.3.0-0.1.1
changelog:
  - moved mwmrc to /etc/X11/mwm
  - moved bindings to /usr/share/X11
  - fixed paths in man pages containing /usr/X11R6


author: Thomas Woerner <twoerner@redhat.com> 2.3.0-0.1.1
changelog:
  - enabled Xft, jpeg and png support
  - patch for missing xft-config
  - dropped duplicate include path in devel package


author: Thomas Woerner <twoerner@redhat.com> 2.3.0-0.1
changelog:
  - new 2.3.0 (beta1)
  - patch for new rgb.txt location (#174210)
    Thanks to Ville Skyttä for the patch


author: Thomas Woerner <twoerner@redhat.com> 2.2.3-11
changelog:
  - fixed mrm initialization error in MrmOpenHierarchyPerDisplay (#167094)
    Thanks to Arjan van de Ven for the patch.


author: Thomas Woerner <twoerner@redhat.com> 2.2.3-9
changelog:
  - Upstream Fix: Multiscreen mode
  - Upstream Fix: Crash when restarting by a session manager (motifzone#1193)
  - Upstream Fix: Crash when duplicating a window menu containing f.circle_up
    (motifzone#1202)
  - fixed divide by zero error in ComputeVizCount() (#144420)
  - Xpmcreate: define LONG64 on 64 bit architectures (#143689)


author: Thomas Woerner <twoerner@redhat.com> 2.2.3-6
changelog:
  - fixed CAN-2004-0687 (integer overflows) and CAN-2004-0688 (stack overflows)
    in embedded Xpm library


author: Thomas Woerner <twoerner@redhat.com> 2.2.3-5
changelog:
  - libXp now moved to xorg-x11-deprecated-libs, therefore no compatibility 
    with XFree86 packages anymore.


author: Thomas Woerner <twoerner@redhat.com> 2.2.3-3
changelog:
  - fixed popup menus fail on Tarantella/VNC (#123027)
  - fixed character not supported problem (#124960)
  - fixed data out of bounds bug (#124961)


author: Thomas Woerner <twoerner@redhat.com> 2.2.2-13
changelog:
  - fix for Xmu/EditRes conflict (bug #80777)
  - fix for wml and utf-8 (bug #80271)
  - fix for Ext18List (bug #74502)


author: Than Ngo <than@redhat.com>
changelog:
  - add 3 official motif patches 
  - add rm -rf $RPM_BUILD_ROOT in install section
  - remove some old patches which are now in official patches


author: Than Ngo <than@redhat.de>
changelog:
  - fix imake to built with gcc-2.96 (thanks Jakup)
  - put bitmaps in /usr/X11R6/include/X11/bitmaps
  - put bindings in /usr/X11R6/lib/Xm/bindings
  - add define -D_GNU_SOURCE to build Motif
  - gzip man pages
  - cleanup specfile


author: Matt Wringe <mwringe at redhat.com> 0:5.1-7jpp
changelog:
  - Add missing BR werken.xpath and ant-apache-regexp
  - Added conditional native compilation
  - Changed spec file encoding from ISO-8859-1 to UTF-8


author: Ralph Apel <r.apel@r-apel.de> 0:5.1-6jpp
changelog:
  - First JPP-1.7 release
  - Use tidyed sources from svn
  - Add resources to build the manual
  - Add examples to -demo subpackage
  - Build with maven by default
  - Add option to build with straight ant


author: Ville Skyttä <ville.skytta at iki.fi> - 5.0-5jpp
changelog:
  - Rebuild to get docdir right on modern distros.
  - Fix License tag and source file perms.
  - Built with IBM's 1.3.1SR3 (doesn't build with Sun's 1.4.1_01).


author: Henri Gomez <hgomez@slib.fr> 5.0-1jpp
changelog:
  - bcel is now a jakarta apache project
  - dependency on jakarta-regexp instead of gnu.regexp 
  - created manual package


author: Karsten Hopp <karsten@redhat.com> 0.213.9-1
changelog:
  - update to latest pci.ids, usb.ids
  - fix missing monitor entries
  - fix wrong ID of Proview 926w monitor


author: Karsten Hopp <karsten@redhat.com> 0.212-1
changelog:
  - pull new upstream pci.ids, usb.ids
  - Resolves: #300831
  - added HP TFT5600 LCD Monitor
  - Resolves: #250569
  - added Acer AL1916W, Eizo L568/L568D, Samsung 795DF
  - Resolves: #250582
  - Add Samsung 205BW/206BW/225BW/226BW
  - Resolves: #250584
  - Add Samsung 931BF
  - Resolves: #250587


author: Karsten Hopp <karsten@redhat.com> 0.207-1
changelog:
  - pull new upstream pci.ids and rebuild
  - Resolves: bz #251732
  - Resolves: bz #251734
  - Resolves: bz #252195
  - Resolves: bz #252196
  - Resolves: bz #241274


author: Karsten Hopp <karsten@redhat.com> 0.205-1
changelog:
  - really update pci.ids, update-pciids downloaded an old file
  - disable iwl4965 blacklist as it is not approved yet (#245379)


author: Karsten Hopp <karsten@redhat.com> 0.194-1
changelog:
  - Update to latest pci.ids/usb.ids for RHEL5
  - Resolves: #220182
    Add some Dell monitors to MonitorDB


author: Phil Knirsch <pknirsch@redhat.com> - 0.183-1
changelog:
  - Updated pci.ids before FC6 final (#198994)
  - Added several missing Samsung monitors (#197463)
  - Included a new inf2mondb.py from Matt Domsch (#158723)


author: Adam Jackson <ajackson@redhat.com> - 0.182-1
changelog:
  - Added ast driver description to videodrivers
  - Numerous Dell monitor additions (#196734)
  - Numerous Belinea monitor additions (#198087)


author: Adam Jackson <ajackson@redhat.com> - 0.181-1
changelog:
  - Updated videodrivers to mention i945
  - New monitors: Sony CPD-G420 (#145902), Compaq P1110 (#155120).


author: Jeremy Katz <katzj@redhat.com> - 0.171-1
changelog:
  - r128 -> ati.  should fix the unresolved symbol and kem says its more 
    generally the "right" thing to do


author: Bill Nottingham <notting@redhat.com>
changelog:
  - migrate mpt module names (#161420)
  - remove pcitable entries for drivers in modules.pcimap
  - switch lone remaining 'Server' entry - that can't work right


author: Bill Nottingham <notting@redhat.com> - 0.160-1
changelog:
  - move blacklist to /etc/modprobe.d, require new module-init-tools
  - add LG monitors (#162466, #161734)
  - add orinoco card (#161696)
  - more mptfusion stuff (#107088)


author: Bill Nottingham <notting@redhat.com> - 0.159-1
changelog:
  - pcitable: make branding happy (#160047)
  - Cards: add required blank line (#157972)
  - add some monitors
  - add JVC CD-ROM (#160907, <richard@rsk.demon.co.uk>)
  - add hisax stuff to blacklist (#154799, #159068)


author: Bill Nottingham <notting@redhat.com> 0.152-1
changelog:
  - fix qlogic driver mappings, add upgradelist mappings for the modules
    that changed names (#150621)


author: Mike A. Harris <mharris@redhat.com> 0.151-1
changelog:
  - Added one hundred billion new nvidia PCI IDs to pcitable and Cards to
    synchronize it with X.Org X11 6.8.2.  (#140601)


author: Bill Nottingham <notting@redhat.com> - 0.120-1
changelog:
  - mainly:
    fix upgradelist module for CMPci cards (#123647)
  - also:
    add another wireless card (#122676)
    add wireless card (#122625)
    add 1280x800 (#121548)
    add 1680x1050 (#121148)
    add IntelligentStick (#124313)


author: Bill Nottingham <notting@redhat.com> 0.116-1
changelog:
  - move updfstab.conf here
  - add wireless card (#116865)
  - add laptop display panel (#117385)
  - add clipdrive (#119928)
  - add travelling disk (#119143)
  - add NEXDISK (#106782)


author: Mike A. Harris <mharris@redhat.com> 0.110-1
changelog:
  - Added 3Dfx Voodoo Graphics and Voodoo II entries to the Cards database, both
    pointing to Alan Cox's new "voodoo" driver which is now included in XFree86
    4.3.0-62 and later builds in Fedora development.  Mapped their PCI IDs to
    the new Cards entry in pcitable.
  - Updated the entries for 3Dfx Banshee


author: Bill Nottingham <notting@redhat.com> 0.105-1
changelog:
  - many monitor updates (#114260, #114216, #113993, #113932, #113782,
    - add some PCMCIA cards (#113006, #112505)


author: Mike A. Harris <mharris@redhat.com> 0.99-1
changelog:
  - Added entries for Radeon 9600/9600Pro/9800Pro to Cards
  - Fixed minor glitch in pcitable for Radeon 9500 Pro


author: Mike A. Harris <mharris@redhat.com> 0.88-1
changelog:
  - Update MonitorsDB for new IBM monitors from upstream XFree86 bugzilla:
    http://bugs.xfree86.org/cgi-bin/bugzilla/show_bug.cgi?id=459


author: Mike A. Harris <mharris@redhat.com> 0.73-1
changelog:
  - Updated pcitable and Cards database to fix Savage entries up a bit, and
    change default Savage/MX driver to 'vesa' as it is hosed and with no sign
    of working in time for 4.3.0.  Fixes (#72476,80278,80346,80423,82394)


author: Mike A. Harris <mharris@redhat.com> 0.68-1
changelog:
  - Massive update of all ATI video hardware PCI IDs in pcitable and a fair
    number of additions and corrections to the Cards database as well


author: Mike A. Harris <mharris@redhat.com> 0.65-1
changelog:
  - Added Card:S3 Trio64V2 (Unsupported RAMDAC) entry to pcitable, pci.ids, and
    Cards database to default this particular variant to "vesa" driver (#81659)


author: Mike A. Harris <mharris@redhat.com>
changelog:
  - Complete reconstruction of all Neomagic hardware entries in Cards
    database to reflect current XFree86, as well as pcitable update,
    and submitted cleaned up entries to sourceforge


author: Bill Nottingham <notting@redhat.com> 0.61-1
changelog:
  - move pcmcia config file here
  - sort MonitorsDB, add some entries, remove dups
  - switch some network driver mappings


author: Bill Nottingham <notting@redhat.com> 0.44-1
changelog:
  - fix some of the Dell entries
  - add cardbus controller id (#71198)
  - add audigy mapping
  - add NEC monitor (#71320)


author: Mike A. Harris <mharris@redhat.com> 0.37-1
changelog:
  - Changed Matrox G450 driver default options to fix bug (#66697)
  - Corrected S3 Trio64V2 bug in Cards file (#66492)


author: Mike A. Harris <mharris@redhat.com> 0.35-1
changelog:
  - Updated Cards db for CT69000
  - Various ATI cleanups and additions to Cards and pcitable
  - Updated S3 Trio3D to default to "vesa" driver (#59956)


author: Bill Nottingham <notting@redhat.com> 0.33-1
changelog:
  - Eizo monitor updates (#56080, <triad@df.lth.se>)
  - pci.ids updates, corresponding pcitable updates
  - pcilint for pcitable


author: Mike A. Harris <mharris@redhat.com> 0.31-1
changelog:
  - Modified ATI entries in pcitable to be able to autodetect the FireGL 8700
    and FireGL 8800 which both have the same ID, but different subdevice ID's.
    Added entries to Cards database for the 8700/8800 as well.


author: Mike A. Harris <mharris@redhat.com> 0.30-1
changelog:
  - Reconfigured Cards database to default to XFree86 4.x for ALL video
    hardware, since 3.3.6 support is being removed.  Video cards not
    supported natively by 4.x will be changed to use the vesa or vga
    driver, or completely removed as unsupported.


author: Deepak Bhole <dbhole@redhat.com> - 0:0.1.28-1jpp.4
changelog:
  - Added conditional compiling support.
  - Added missing requirements.
  - Additionally, for synchronizaion between logs:
  - From r.apel@r-apel.de:
    - 0.1.26
  - From fnasser@redhat.com:
    - 0.1.20


author: Andrew Overholt <overholt@redhat.com> 0.1.17-2jpp_1fc
changelog:
  - Build into Fedora.
  - Remove Distribution and Vendor tags.
  - Add BuildRequires:  java-devel for javadoc requirement.


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.21-4
changelog:
  - Added support for using PSK with NSS (rhbz 507844)
  - Fixed several warnings and undid unnecessary comments
  - Updated README.nss with an example configuration
  - Fixed Openswan ASN.1 parser vulnerability (CVE-2009-2185)
  Resolves: CVE-2009-2185
  Resolves: #507844


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.21-3
changelog:
  - Revised patch to support fips integrity check functionality
  Resolves: #469763 FIPS-140: Add integrity checking


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.21-1
changelog:
  - Upstream release
  - Major patches for support of NSS and fipscheck libraries
  Resolves: #444801 FIPS-140-2: Meet certification requirements for pluto
  Resolves: #469763 FIPS-140: Add integrity checking
  Resolves: #438998 Openswan's 'cannot route...' problem
  Resolves: #449725 Openswan seg fault using manual keying.
  Resolves: #463931 /etc/ipsec.conf includes /etc/ipsec.d/*.conf which is missing
  Resolves: #466861 avc: denied { write } for pid=2193 comm="ip" path="/var/run/pluto/ipsec_setup.out"
  Resolves: #487708 Misleading package description


author: Steve Grubb <sgrubb@redhat.com> - 2.6.14rc7-1
changelog:
  - new upstream release
  Resolves: #439771 openswan and strongswan fail to interoperate with IKEv2
  Resolves: #441383 openswan should negotiate CCM algorithm
  Resolves: #442955 openswan doesn't accept null esp auth alg
  Resolves: #442956 openswan logging segfault when phase2alg=null
  Resolves: #444166 openswan IKEv2 crashes when interoperating with racoon2


author: Steve Grubb <sgrubb@redhat.com> - 2.6.12-1
changelog:
  - new upstream release
  Resolves: #432821 left/rightsourceip tags not working
  Resolves: #439985 opeswan IKEv2 responder fails when encr=aes and dh=modp1024
  Resolves: #441588 openswan IKEv2 crashes when interoperating with racoon2
  Resolves: #442333 AVC denials on start of openswan host-to-host tunnel


author: Steve Grubb <sgrubb@redhat.com> - 2.6.11-1
changelog:
  - new upstream release
  Resolves: #438826 openswan IKEv2 hangs between intel and ppc64 machines
  Resolves: #439985 opeswan IKEv2 responder fails when encr=aes and dh=modp1024


author: Steve Conklin <sconklin@redhat.com> - 2.6.09-1
changelog:
  Resolves: rhbz#432315
  Resolves: rhbz#432805
  Resolves: rhbz#432821
  - Moved to latest upstream
  - removed init script patch and will use upstream
  - Added protostack=netkey to ipsec.conf
  - New patch to include definition of HOST_NAME_MAX


author: Steve Conklin <sconklin@redhat.com> - 2.6.05-1
changelog:
  - Latest upstream
  - remove selinux test and message from verify script
  - forgot the following bz earlier
  Resolves: rhbz#253052 Request for IPSec IKEv2


author: Steve Conklin <sconklin@redhat.com> - 2.6.03-9
changelog:
  - cleanup some init problems
  Resolves: rhbz#430149 openswan init script errors
  Resolves: rhbz#430150 openswan emits spurious warnings


author: Steve Conklin <sconklin@redhat.com> - 2.6.03-8
changelog:
  Related: rhbz#235224
  - rpmdiff spotted these:
  - Cleaned out unused man page
  - patch error in barf script


author: Steve Conklin <sconklin@redhat.com> - 2.6.03-6
changelog:
  - Moved everything else out of /usr/lib
  - Added tmraz's patch to remove extra slashes in makefile
  - Removed macros from changelog entries


author: Steve Conklin <sconklin@redhat.com> - 2.6.03-4
changelog:
  - Removed use of xmlto and the BuildRequires
  - moved scripts from /usr/lib to /usr/libexec
  - removed man3 pages for libopenswan functions (we don't deliver)


author: Steve Conklin <sconklin@redhat.com> - 2.6.03-3
changelog:
  - Removed _smp_mflags macro from from the spec file build section
  - Added BuildRequires for xmlto
  - Changed License from GPL to GPL+
  - removed klips ifdefs from spec file
  - Added patch to move example configs to doc dir
  - Added a patch to make the link to init script relative, 
    for chroot environments


author: Harald Hoyer <harald@redhat.com> - 2.4.4-1.1
changelog:
  - version 2.4.4
  - fixes NISCC Vulnerability Advisory 273756/NISCC/ISAKMP
  - fixes NISCC Advisory 3756/NISCC/ISAKMP


author: Harald Hoyer <harald@redhat.com> - 2.3.1-3
changelog:
  - added openswan-2.3.1-nat_t_aggr.patch
  - added openswan-2.3.1-iproute2.patch
  - added openswan-2.3.1-cisco.patch
  - NAT-T/XAUTH/AGGR-MODE is now possible with a Cisco VPN 3000


author: Harald Hoyer <harald@redhat.com> - 2.3.0-1
changelog:
  - version 2.3.0
  - reimported specfile
  - PIEd openswan
  - cleaned up initial config files and added include directives
    for easy config drop in


author: Harald Hoyer <harald@redhat.com> - 2.1.5-1
changelog:
  - added selinux patch from Daniel Walsh
  - initscript now uses translated strings
  - version 2.1.5 with minor fixes


author: Bill Nottingham <notting@redhat.com> - 2.1.4-6
changelog:
  - don't run by default
  - don't create/chmod directories in %post, just include them with the
    right perms
  - fix debuginfo
  - fix docs


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-calcomp to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for calcomp input driver generated automatically
    by my xorg-driverspecgen script.


author: Petr Machata <pmachata@redhat.com> - 2.5.4a-39
changelog:
  - fileno is defined in posix standard, so adding #define _POSIX_SOURCE
    to compile without warnings (#195687)
  - dropping 183098 test, since the original bug was already resolved


author: Petr Machata <pmachata@redhat.com> - 2.5.4a-38
changelog:
  - Caught the real cause of #183098.  It failed because the parser
    built with `flex -f' *sometimes* made it into the final package, and
    -f assumes seven-bit tables.  Solution has two steps.  Move `make
    bigcheck' to `%check' part, where it belongs anyway, so that flexes
    built during `make bigcheck' don't overwrite original build.  And
    change makefile so that `make bigcheck' will *always* execute *all*
    check commands.


author: Petr Machata <pmachata@redhat.com> 2.5.4a-36
changelog:
  - Applying Jonathan S. Shapiro's bugfix-fixing patch. More std:: fixes
    and better way to silent warnings under gcc.


author: Petr Machata <pmachata@redhat.com> 2.5.4a-35
changelog:
  - Adding `std::' prefixes, got rid of `using namespace std'. (#115354)
  - Dummy use of `yy_flex_realloc' to silent warnings. (#30943)
  - Adding URL of flex home page to spec (#142675)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix generation of broken code (conflicting isatty() prototype w/ glibc 2.2)
    This broke, among other things, the kdelibs 2.0 build
  - Fix source URL


author: Stepan Kasal <skasal@redhat.com> 2.5.1-55
changelog:
  - fix hang under non-UTF-8 multibyte locales (#479151)
  - with lines longer than 200 MB, give up rather than print incorrect
    output (#483073)
  - fix an off-by-one error which might cause segfault (#452127)
  - a doc improvement (#484366)
  - Resolves: #479151, #452127, #483073, and 484366


author: Tim Waugh <twaugh@redhat.com> 2.5.1-54.2
changelog:
  - Fixed count of patterns when the last is an empty string (bug #216934).
  - Fix 'memory exhausted' errors by limiting in-memory buffer (bug #216882).


author: Tim Waugh <twaugh@redhat.com> 2.5.1-47
changelog:
  - Run 'make check'.
  - Fixed -w handling for EGexecute.  Now 'make check' passes.
  - Cache MB_CUR_MAX value in egf-speedup patch.
  - Fixed variable shadowing in egf-speedup patch.
  - Removed redundant (and incorrect) code in prline.


author: Tim Waugh <twaugh@redhat.com> 2.5.1-45
changelog:
  - More tests (Jakub Jelinek).
  - Jakub Jelinek's much improved -Fi algorithm.
  - Removed bogus part of grep-2.5.1-fgrep patch.


author: Tim Waugh <twaugh@redhat.com> 2.5.1-42
changelog:
  - Further UTF-8 processing avoided since a '\n' byte is always an
    end-of-line character in that encoding.


author: Tim Waugh <twaugh@redhat.com> 2.5.1-38
changelog:
  - Applied patch from Karsten Hopp to fix background colour problems with
    --color output (bug #138913).


author: Tim Waugh <twaugh@redhat.com> 2.5.1-36
changelog:
  - Automatically disable DFA when processing multibyte input.  GREP_USE_DFA
    environment variable overrides.


author: Tim Waugh <twaugh@redhat.com> 2.5.1-35
changelog:
  - Fixes to egf-speedup patch: now it does not change any functionality,
    as intended.
  - GREP_NO_DFA now turns off the DFA engine, for performance testing.


author: Tim Waugh <twaugh@redhat.com> 2.5.1-32
changelog:
  - Remove mb-caching hack.
  - Better multibyte handling in EGexecute() and Fexecute().
  - Don't need regex.c changes in grep-2.5-i18n.patch.


author: Tim Waugh <twaugh@redhat.com> 2.5.1-31
changelog:
  - Make 'grep -F' avoid UTF-8 processing if the pattern contains no
    multibyte characters (bug #133932).


author: Tim Waugh <twaugh@redhat.com> 2.5.1-27
changelog:
  - Fix dfa multibyte character class matching when -i is used (bug #123363).
  - Use bracket patch before i18n patch to make it clear that the bug exists
    upstream.


author: Tim Waugh <twaugh@redhat.com> 2.5.1-24
changelog:
  - Work around glibc bug #112869 (segfault in re_compile_pattern).
  - Avoid patching Makefile.am, to avoid automake/autoconf weirdness.


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.4.2-7
changelog:
  - Fix up the i18n patch - it used to break "grep '[]a]'" (#49003)
  - revert to 2.4.2 (latest official release) for now


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.5e-2
changelog:
  - Fix up the --color option to behave like the one from ls (--color=auto)
    Sooner or later, some people will alias grep="grep --color" and wonder why
    their scripts break.
  - Update docs accordingly
  - Get rid of the annoying blinking in grep --color


author: Mike A. Harris <mharris@redhat.com> 2.4.0-3
changelog:
  - Added "Requires: libGL-devel libGLU-devel" to fix bug (#179464)
  - Change file based GL header build dep to BuildRequires: libGL-devel


author: Mike A. Harris <mharris@redhat.com> 2.4.0-1
changelog:
  - Updated to freeglut-2.4.0
  - Removed unneeded patches:
    - freeglut-2.2.0-gcc4-fix-invalid-lvalue-in-assignment-cvsps-392-393.patch
  - Use "-p /sbin/ldconfig" in post/postun scripts instead of a separate script.


author: Mike A. Harris <mharris@redhat.com> 2.2.0-16
changelog:
  - Added freeglut-2.2.0-gcc4-fix-invalid-lvalue-in-assignment-cvsps-392-393.patch
    to fix "invalid lvalue in assignment" bugs reported by gcc 4
  - Added "-Wall" to CFLAGS in specfile.


author: Mike A. Harris <mharris@redhat.com> 2.2.0-11
changelog:
  - Updated "Obsoletes: glut" to be "Obsoletes: glut <= 3.7" and
    "Obsoletes: glut-devel" to be "Obsoletes: glut-devel <= 3.7" as per
    suggestion from Matthias Saou in comment #14 of bug (#107228)


author: Mike A. Harris <mharris@redhat.com> 2.2.0-10
changelog:
  - Initial Red Hat packaging created by taking the ATrpms src.rpm package from
    http://tinyurl.com/2goog as suggested in bugzilla bug (#107228)
  - Bumped the Release field to "10" so our package is newer when people
    upgrade to it, as requested in bug (#107228)
  - Removed redundant version/release macros from top of specfile
  - Versioned buildroot directory
  - Add --enable-warnings arg to ./configure script
  - Add HTML documentation to main package
  - Made "glut" virtual provides be "glut = 3.7"
  - Do not include *.la files


author: Mike A. Harris <mharris@www.linux.org.uk> 1.3-0.20020125.2
changelog:
  - Oddly, when I build this on my workstation, it only builds static libs, but
    when I build it in the buildsystem it builds shared and static libs.  Must
    be a twilight zone thing going on.  Add shared libs to file lists.


author: Mike A. Harris <mharris@www.linux.org.uk> 1.3-0.20020125.1
changelog:
  - Added -L/usr/X11R6/lib configure script invocation and CFLAGS so lib64
    is treated properly on x86_64/ppc64/s390x architectures


author: Adam Jackson <ajax@redhat.com> 0.9.1-3.20071031
changelog:
  - libpciaccess-fd-cache.patch: Cache sysfs PCI config space file
    descriptors for great boot speed justice.


author: KELEMEN Peter <Peter.Kelemen@cern.ch> - 4-0
changelog:
  - unified SLC4/SLC5 handling
  - cleaned up dependencies
  - got rid of obsolete apt->yum transition triggers


author: Jaroslaw Polok <jaroslaw.polok@cern.ch>
changelog:
  - repackaged for Scientific Linux
  - site specific part is provided now by apt-sourceslist rpm
    (provided separately)


author: Harald Hoyer <harald@redhat.com> 2.2.3-5
changelog:
  - added modified patch from Michael E. Brown @ Dell, to also 
    read all /usr/share/hwdata/pci.ids.d/*.ids files (rhbz#195327)
  - Resolves: rhbz#195327


author: Jeremy Katz <katzj@redhat.com> 2.1.11-2
changelog:
  - build a diet libpci_loader.a on i386
  - always assume pread exists, it does with diet and all vaguely recent glibc


author: Elliot Lee <sopwith@redhat.com> 2.1.10-5
changelog:
  - Add patch4 for ppc64. The basic rule seems to be that on any platform
  where it is possible to be running a 64-bit kernel, we need to always 
  print out 64-bit addresses.


author: Akira TAGOH <tagoh@redhat.com> - 7900-1
changelog:
  - New upstream release.
  - anthy-7900-fix-undef-non-weak-symbol.patch: fixed the undefined non-weak
    symbols issue. (#198180)
  - use dist tag.


author: Akira TAGOH <tagoh@redhat.com> - 7802-2
changelog:
  - exclude ppc64 to make anthy-el package. right now emacs.ppc64 isn't provided
    and buildsys became much stricter.


author: Akira TAGOH <tagoh@redhat.com> - 7622-1
changelog:
  - New upstream snapshot release.
    - removed unnecessary patches:
      - anthy-2832.patch
      - anthy-2834.patch


author: Akira TAGOH <tagoh@redhat.com> - 7500-1
changelog:
  - New upstream release.
    - larning words works now. (#178764)
  - anthy-2832.patch: patch from upstream that fixes wrong order of candidate list.
  - anthy-2834.patch: patch from upstream that fixes unexpected word segment.
  - anthy-gcanna-nakaguro.patch: added a word to dictionary to convert nakaguro to slash.


author: Akira TAGOH <tagoh@redhat.com> - 7013-1
changelog:
  - New upstream snapshot release.
  - removed the patches:
    - anthy-add-placename-dict.patch: isn't needed anymore.
    - anthy_base.t.diff: merged into upstream.
    - zipcode-20050831.tar.bz2: merged into upstream.


author: Akira TAGOH <tagoh@redhat.com> - 6829-3
changelog:
  - applied some patches from anthy-dev mailing list to improve the dictionaries.
    - anthy_base.t.diff
    - anthy_gcanna.ctd.diff
    - anthy_gcanna.ctd_20050918.diff
    - anthy_gcanna.ctd_20050920.diff
  - parameterize anthy-el-xemacs build.


author: Akira TAGOH <tagoh@redhat.com> - 6700b-1
changelog:
  - New upstream release.
  - Import into Core.
  - includes the libraries into anthy and added Obsoletes: anthy-libs.


author: Milan Broz <mbroz@redhat.com> - 1.02.55-2
changelog:
  - Allocate buffer for reporting functions dynamically to support long outputs.
  - Fix regex optimiser not to ignore RHS of OR nodes in _find_leftmost_common.
    Resolves: #649710 #651349


author: Milan Broz <mbroz@redhat.com> - 1.02.39-2
changelog:
  - Change dm_tree_deactivate_children to fail if device is open.
  - Optimize regular expression processing (e.g. lvm.conf filter).
    Resolves: #583646 #581830


author: Milan Broz <mbroz@redhat.com> - 1.02.32-1
changelog:
  - Update to latest upstream release.
  - Source files are now part of LVM2 upstream source tree.
    Resolves: #501752


author: Milan Broz <mbroz@redhat.com> - 1.02.20-1
changelog:
  - Update to latest upstream release.
  - Add tree-based and dependency fields to dmsetup reports.
    Resolves: #168533


author: Alasdair Kergon <agk@redhat.com> - 1.02.13-1
changelog:
  - Update dmsetup man page (setgeometry & message).
  - Suppress encryption key in 'dmsetup table' output unless --showkeys supplied.


author: Alasdair Kergon <agk@redhat.com> - 1.02.12-1.0
changelog:
  - Avoid deptree attempting to suspend a device that's already suspended.
  - Smaller upstream source tarball with files for 2.4 kernel removed.


author: Alasdair Kergon <agk@redhat.com> - 1.02.10-1.0
changelog:
  - Add dm_snprintf(), dm_split_words() and dm_split_lvm_name() to libdevmapper.
  - Reorder mm bounds_check code to reduce window for a dmeventd race.
  - Make dmeventd start/end messages LOG_INFO instead of LOG_DEBUG.
  - Check thread_registry_unused when checking for registered dmeventd device.


author: Alasdair Kergon <agk@redhat.com> - 1.02.02-2.0
changelog:
  - Remove unused event daemon code. (176877)
  - Fix 'dmsetup version'. (176861)
  - Fix hash functions for clvm. (176443)


author: Alasdair Kergon <agk@redhat.com> - 1.02.02-1.0
changelog:
  - Include event daemon in the build.
  - Export dm_task_update_nodes.
  - Use ioctl names instead of numbers in failure error messages.


author: Alasdair Kergon <agk@redhat.com> - 1.02.00-1.0
changelog:
  - Extend library with hash, bitset, pool, dbg_malloc and activation
    tree functions.
  - Add ls --tree to dmsetup.
  - Add nolockfs support for suspend/reload.


author: Alasdair Kergon <agk@redhat.com> - 1.01.02-1
changelog:
  - Add --exec and --target to dmsetup for initrd convenience.
  - Automatically call dm_lib_exit when exiting.


author: Alasdair Kergon <agk@redhat.com> - 1.01.01-1
changelog:
  - Update dmsetup man page.
  - Replicate devmap_name output with dmsetup info -c --noheadings -o name.


author: Alasdair Kergon <agk@redhat.com> - 1.01.00-2
changelog:
  - Reinstate a copy of previous shared library version 1.00 to avoid 
    requiring applications using libdevmapper to be recompiled immediately.


author: Alasdair Kergon <agk@redhat.com> - 1.00.17-1
changelog:
  - Fix non-root build with current version of 'install'.
  - Incorporate last two selinux patches into tarball.


author: Jens Petersen <petersen@redhat.com> - 2.58-2
changelog:
  - fix problem with ac_abs_{build,src}dir (#109267) [reported by Joe Orton,
    patch by Alexandre Duret-Lutz]


author: Jens Petersen <petersen@redhat.com> 2.56-2
changelog:
  - add --without check build option to control whether "make check" run
  - don't gzip info files explicitly
  - use exclude for unwanted info files


author: Jens Petersen <petersen@redhat.com> 2.56-1
changelog:
  - update to 2.56
  - obsolete autoheader-warn patch
  - no longer provide autoconf253
  - include site-lisp and man files
  - remove info dir which is not in the manifest
  - do not version suffix bin files for now


author: Jens Petersen <petersen@redhat.com> 2.53-1
changelog:
  - update to autoconf-2.53
  - drop mawk patch again
  - version suffix bindir files and add symlinks to unversioned names


author: Jens Petersen <petersen@redhat.com> 2.52-5
changelog:
  - update to 2.52f
  - add URL
  - minor description improvements
  - define relversion to carry version number
  - mawk.patch no longer needed


author: Joe Orton <jorton@redhat.com> - 2.2.3-45
changelog:
  - ab: fail gracefully for OOM allocating stats structures (#645845)
  - init script: use $STOP_DELAY as delay before SIGKILL of parent (#644223)
  - mod_dav: don't delete the existing resource if a PUT fails (#572910)
  - core: don't replace Date header when acting as reverse proxy (#565865)
  - mod_dbd: fix pool usage (#633955)


author: Joe Orton <jorton@redhat.com> - 2.2.3-44
changelog:
  - mod_ssl: improved fix for SSLRequire's OID() function (#614423)
  - add security fixes for CVE-2010-1452, CVE-2010-2791 (#623211)
  - mod_deflate: rebase to 2.2.15 (#612211)
  - stop multiple invocations of filter init functions (#570628)


author: Joe Orton <jorton@redhat.com> - 2.2.3-38
changelog:
  - mod_ssl: fix additional case for OID() handling (#552942)
  - mod_authnz_ldap: fix handling of empty filter in group defn (#252038)


author: Joe Orton <jorton@redhat.com> - 2.2.3-32.el5
changelog:
  - fix hard-coded default pidfile to match default config (#505002)
  - mod_ssl: fix potential hang in renegotiation (#510515)
  - drop legacy X-Pad header from short responses (#526110)
  - mod_proxy_ajp: fix handling of large uploads (#528640)
  - mod_authnz_ldap: add AuthLDAPRemoteUserAttribute directive (#520838)
  - mod_rewrite: add DiscardPathInfo flag (#517500)
  - mod_authnz_ldap: don't fail authz if no ldap-* configured (#448350)
  - disable keepalive for Expect: 100-continue and error response (#533407)


author: Joe Orton <jorton@redhat.com> 2.2.3-27.el5
changelog:
  - mod_cgi, mod_cgid: fix logging on input read error (#498170)
  - mod_rewrite: don't serialize logfile access (#493023)
  - mod_ext_filter: fix spurious error log output (#479463)


author: Joe Orton <jorton@redhat.com> 2.2.3-25.el5
changelog:
  - mod_rewrite: fix URI escaping with [P] in directory context (#480604)
  - mod_cgi: fix headers/status in error responses (#480932)
  - mod_speling: fix handling of directory names (#485524)
  - init script: use ${pidfile} in more places (#491135)
  - mod_log_config: support remote/local with 'p' format (#493070)
  - remove Obsolete for mod_jk (#493592)
  - mod_ssl: fix SSL per-dir-reneg buffering with internal redirects (#488886)
  - fix spurious error messages on graceful restart (#233955)


author: Joe Orton <jorton@redhat.com> 2.2.3-22.el5
changelog:
  - add security fixes for CVE-2008-2939 (#468841)
  - note that the mod_proxy 2.2.9 rebase fixed CVE-2008-2634


author: Joe Orton <jorton@redhat.com> 2.2.3-16.el5
changelog:
  - mod_proxy*, mod_cache*: rebase to 2.2.9 (#252024, #249534,
    - backport changes to make chunk filter non-blocking (#454098)


author: Joe Orton <jorton@redhat.com> 2.2.3-15.el5
changelog:
  - mod_ldap: fix memory lifetime issues (#440259)
  - mod_ssl: configure OpenSSL dynamic lock callbacks (#462044)
  - escape the Request-Method in canned error responses (#445888)
  - build the event MPM and fix a deadlock therein (#444643)
  - mod_headers: support "RequestHeader edit" (#428253)
  - use "OPTIONS *" rather than "GET /" in dummy connection (#367981)


author: Joe Orton <jorton@redhat.com> 2.2.3-13.el5
changelog:
  - mod_proxy_balancer: allow alternative string to match for
    stickysession parameter (#439218)
  - fix dist tag in Release (#440615)


author: Joe Orton <jorton@redhat.com> 2.2.3-11.el5_1.1
changelog:
  - add security fixes for CVE-2007-6388, CVE-2007-6421
    and CVE-2007-6422 (#427240)
  - add security fix for CVE-2007-4465, CVE-2007-5000 (#421631)
  - add security fix for mod_proxy_ftp UTF-7 XSS (#427745)


author: Joe Orton <jorton@redhat.com> 2.2.3-8.el5
changelog:
  - add 'ServerTokens Full-Release' config option (#240857)
  - use init script in logrotate postrotate (#241680)
  - fix mod_proxy option inheritance (#245719)
  - fix ProxyErrorOverride to only affect 4xx, 5xx responses (#240024)
  - bump logresolve line buffer length to 10K (#245763)
  - add security fixes for CVE-2007-1863, CVE-2007-3304,
    and CVE-2006-5752 (#244666)


author: Joe Orton <jorton@redhat.com> 2.2.2-5
changelog:
  - require pkgconfig for -devel (#194152)
  - fixes for installed support makefiles (special.mk et al)
  - BR autoconf


author: Joe Orton <jorton@redhat.com> 2.2.0-5.1
changelog:
  - mod_auth_basic/mod_authn_file: if no provider is configured,
    and AuthUserFile is not configured, decline to handle authn
    silently rather than failing noisily.


author: Joe Orton <jorton@redhat.com> 2.2.0-5
changelog:
  - mod_ssl: add security fix for CVE-2005-3357 (#177914)
  - mod_imagemap: add security fix for CVE-2005-3352 (#177913)
  - add fix for AP_INIT_* designated initializers with C++ compilers
  - httpd.conf: enable HTMLTable in default IndexOptions
  - httpd.conf: add more "redirect-carefully" matches for DAV clients


author: Joe Orton <jorton@redhat.com> 2.2.0-2
changelog:
  - don't strip C-L from HEAD responses (Greg Ames, #110552)
  - load mod_proxy_balancer by default
  - add proxy_ajp.conf to load/configure mod_proxy_ajp
  - Obsolete mod_jk
  - update docs URLs in httpd.conf/ssl.conf


author: Joe Orton <jorton@redhat.com> 2.0.54-15
changelog:
  - log notice giving SELinux context at startup if enabled
  - drop SSLv2 and restrict default cipher suite in default
   SSL configuration


author: Joe Orton <jorton@redhat.com> 2.0.54-14
changelog:
  - mod_ssl: add security fix for SSLVerifyClient (CVE-2005-2700)
  - add security fix for byterange filter DoS (CVE-2005-2728)
  - add security fix for C-L vs T-E handling (CVE-2005-2088)
  - mod_ssl: add security fix for CRL overflow (CVE-2005-1268)
  - mod_ldap/mod_auth_ldap: add fixes from 2.0.x branch (upstream #34209 etc)
  - add fix for dummy connection handling (#167425)
  - mod_auth_digest: fix hostinfo comparison in CONNECT requests
  - mod_include: fix variable corruption in nested includes (upstream #12655)
  - mod_ssl: add fix for handling non-blocking reads
  - mod_ssl: fix to enable output buffering (upstream #35279)
  - mod_ssl: buffer request bodies for per-location renegotiation (upstream #12355)


author: Joe Orton <jorton@redhat.com> 2.0.54-11
changelog:
  - mod_dav_fs: fix uninitialized variable (#162144)
  - add epoch to dependencies as appropriate
  - mod_ssl: drop dependencies on dev, make
  - mod_ssl: mark post script dependencies as such


author: Joe Orton <jorton@redhat.com> 2.0.54-7
changelog:
  - mod_userdir: fix memory allocation issue (upstream #34588)
  - mod_ldap: fix memory corruption issue (Brad Nicholes, upstream #34618)


author: Joe Orton <jorton@redhat.com> 2.0.54-5
changelog:
  - create default dummy cert in /etc/pki/tls
  - use a pseudo-random serial number on the dummy cert
  - change default ssl.conf to point at /etc/pki/tls
  - merge back -suexec subpackage; SELinux policy can now be
    used to persistently disable suexec (#155716)
  - drop /etc/httpd/conf/ssl.* directories and Makefiles
  - unconditionally enable PIE support
  - mod_ssl: fix for picking up -shutdown options (upstream #34452)


author: Joe Orton <jorton@redhat.com> 2.0.53-6
changelog:
  - update default httpd.conf:
   * clarify the comments on AddDefaultCharset usage (#135821)
   * remove all the AddCharset default extensions
   * don't load mod_imap by default
   * synch with upstream 2.0.53 httpd-std.conf
  - mod_ssl: set user from SSLUserName in access hook (upstream #31418)
  - htdigest: fix permissions of created files (upstream #33765)
  - remove htsslpass


author: Joe Orton <jorton@redhat.com> 2.0.52-7
changelog:
  - fix cosmetic issues in "service httpd reload"
  - move User/Group higher in httpd.conf (#146793)
  - load mod_logio by default in httpd.conf
  - apachectl: update for correct libselinux tools locations


author: Joe Orton <jorton@redhat.com> 2.0.52-6
changelog:
  - add security fix for CVE CAN-2004-0942 (memory consumption DoS)
  - SELinux: run httpd -t under runcon in configtest (Steven Smalley)
  - fix SSLSessionCache comment for distcache in ssl.conf
  - restart using SIGHUP not SIGUSR1 after logrotate
  - add ap_save_brigade fix (upstream #31247)
  - mod_ssl: fix possible segfault in auth hook (upstream #31848)
  - add htsslpass(1) and configure as default SSLPassPhraseDialog (#128677)
  - apachectl: restore use of $OPTIONS
  - apachectl, httpd.init: refuse to restart if $HTTPD -t fails
  - apachectl: run $HTTPD -t in user SELinux context for configtest
  - update for pcre-5.0 header locations


author: Mike A. Harris <mharris@redhat.com> 1.0.2-3.fc6
changelog:
  - Add the {_datadir}/X11/app-defaults directory to the file manifest, as
    libXt is the canonical owner of the directory.  Discovered in (#198025).


author: Adam Jackson <ajackson@redhat.com> 1.0.2-2
changelog:
  - Added libXt-1.0.2-libsm-fix.patch to remove libSM from the Requires: line
    in the installed pkgconfig file.  Apps should link against libSM if they
    need it, but we shouldn't force them to link against it if they don't.


author: Mike A. Harris <mharris@redhat.com> 1.0.1-2
changelog:
  - Added "BuildRequires: pkgconfig" for (#193503)
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Updated libXt to version 1.0.0 from X11R7 RC4
  - Added makestrs and it's manpage to the devel subpackage.


author: Mike A. Harris <mharris@redhat.com> 0.99.3-1
changelog:
  - Updated libXt to version 0.99.3 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Kristian Høgsberg <krh@redhat.com> 0.99.2-3
changelog:
  - Use the default value from configure.ac for --with-xfile-search-path
    except with %{_datadir} instead of $(libdir), so Xt can search for
    app-default files as usual.
  - Move the --with-xfile-search-path outside the with_static condition.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-2
changelog:
  - Invoke ./configure --with-xfile-search-path=%{_datadir}/X11/app-defaults
    to make sure Xt is looking in the right place for app-defaults files.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libXt to version 0.99.2 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Updated libXt to version 0.99.1 from X11R7 RC1
  - Updated file manifest to find manpages in 'man3x'


author: Mike A. Harris <mharris@redhat.com> 0.99.0-5
changelog:
  - Added Requires: libX11-devel to libXt-devel subpackage, as Xt headers
    include Xlib headers causing xterm and other things to fail to compile.


author: Jiri Popelka <jpopelka@redhat.com> - 1.0.10-19
changelog:
  - Server correctly parses Relay-Forward message (bug #512399).
  - Client correctly handles NotOnLink error in REPLY (bug #511323).
  - Server doesn't send NotOnlink error in REPLY
    when more range statements configured (bug #598439).


author: Jiri Popelka <jpopelka@redhat.com> - 1.0.10-18
changelog:
  - Get new address when moving into a new link (bug #466251).
  - Windows 2008 interoperability fix in dhcp6c (bug #476974).
  - Check DAD necessity by the interface type to prevent dhcp6c
    from segfaulting when run for second time (bug #515644).


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-16
changelog:
  - Remove the ADVERTISE/REPLY patch for option 24 as it is unnecessary,
    the problem was in our test driver scripts for the TAHI suite
    Resolves: rhbz#426899


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-15
changelog:
  - Allow users to configure dhcp6s to return only option 24 for
    ADVERTISE and REPLY messages
    Related: rhbz#426899


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-14
changelog:
  - Add directive for dhcp6s.conf that lets users enable the 'only
    send option 23 for ADVERTISE messages' setting
    Related: rhbz#426899


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-10
changelog:
  - Keep DUID consistent
    Resolves: rhbz#377101
  - Match DUID LLT time field on client-server communications
    Resolves: rhbz#365501


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-8
changelog:
  - Make sure DUID is saved in dhcp6s as it is in dhcp6c.  This keeps the DUID
    consistent in dhcp6s and keeps the DUID time field correct.
    Resolves: rhbz#377101
    Resolves: rhbz#365501
  - Do not send the domain list to the client unless it's a requested option
    Resolves: rhbz#426899


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-6
changelog:
  - Support multiple IA options
    Resolves: rhbz#439526
    Resolves: rhbz#365531
    Resolves: rhbz#365651
    Resolves: rhbz#426899
    Resolves: rhbz#365661
  - DUID type 1 time is time since January 1, 2000 (UTC), modulo 2^32
    Resolves: rhbz#365501


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-5
changelog:
  - Do not dereference a possible NULL pointer in dhcp6c
    Resolves: rhbz#439942
  - Check DUID and IAID for duplicate hosts
    Resolves: rhbz#440330
  - Add error handling during initialization of dhcp6c
    Resolves: rhbz#449052
  - Log correct PID after daemonizing in dhcp6c
    Resolves: rhbz#449051
  - Handle multiple nameservers in option-23
    Resolves: rhbz#449053
  - Use last 4 bytes of MAC address to generate IAID
    Resolves: rhbz#449054


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-4
changelog:
  - Do not send Message-ID from dhcp6r except for RELAY-FORWARD and RELAY-REPL
    Resolves: rhbz#440440


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-3
changelog:
  - Fix hwtype in calculate_duid_len()
    Resolves: rhbz#377101
  - Do not return IA_NA option with status code set to NoAddrAvail
    Resolves: rhbz#365531
    Related: rhbz#426899
  - Add domain list option check to specify DNS list
    Related: rhbz#377131
  - Update 'now' whenever checking expiration for each timer
    Resolves: rhbz#365501
  - Verify length of buffer for RELAY_REPL correctly
    Resolves: rhbz#365551
    Related: rhbz#365521
    Related: rhbz#365531
    Related: rhbz#365541
    Related: rhbz#365581
    Related: rhbz#365591
    Related: rhbz#365601
    Related: rhbz#365631
    Related: rhbz#365641
    Related: rhbz#365651
    Related: rhbz#376871
  - Support updating /etc/resolv.conf when network-functions is not available
    Related: rhbz#377131
  - Remove gcc_intrin.h workaround for ia64
    Related: rhbz#429074


author: David Cantrell <dcantrell@redhat.com> - 1.0.10-2
changelog:
  - Fix hwtype in calculate_duid_len()
    Resolves: rhbz#377101
  - Do not return IA_NA option with status code set to NoAddrAvail
    Resolves: rhbz#365531
  - Add domain list option check to specify DNS list
    Related: rhbz#377131
  - Update 'now' whenever checking expiration for each timer
    Resolves: rhbz#365501
  - Verify length of buffer for RELAY_REPL correctly
    Resolves: rhbz#365551
  - Support updating /etc/resolv.conf when network-functions is not available
    Related: rhbz#377131
  - Remove gcc_intrin.h workaround for ia64
    Related: rhbz#429074


author: David Cantrell <dcantrell@redhat.com> - 1.0.7-1
changelog:
  - Fix dhcp6c re-assign of IPv6 global address after Confirm/Reply msg exchange
    Resolves: rhbz#249466
  - Make dhcp6c retransmit Confirm message in expected duration
    Resolves: rhbz#251192
  - Fix value dhcp6c stores to elapsed time option in Solicit message
    Resolves: rhbz#249451
  - Make dhcp6c ignore Reply message that contains IA_NA with T1 > T2
    Resolves: rhbz#254194
  - Do not let dhcp6c remove leases that are not on the updated list
    Resolves: rhbz#265761
  - Fix RFC 3646 compliance
    Resolves: rhbz#382331
  - /etc/init.d/dhcp6s line continuation in description fix
    Resolves: rhbz#204713
  - Avoid global library symbol collisions in libdhcp6client
    Resolves: rhbz#216188
  - Init script fixes (LSB compliance)
    Resolves: rhbz#237970
  - Match time field of received DHCPv6 Advertise message
    Resolves: rhbz#365501
  - Include Advertise message in Relay-Repl message
    Resolves: rhbz#365521
  - Include valid IA_Address option in Reply messages
    Resolves: rhbz#365531
  - Do not return Reply message when receiving a Confirm message via unicast
    Resolves: rhbz#365541
  - Set status code of Reply message to NotOnLink when necessary
    Resolves: rhbz#365551
  - Do not send unexpected Reply messages to client
    Resolves: rhbz#365551
  - Set lifetime of Reply messages to zero
    Resolves: rhbz#365581
  - Include NoBinding status in the IA_NA option in Reply messages when needed
    Resolves: rhbz#365591
  - Do not return Reply message when receiving a Rebind message via unicast
    Resolves: rhbz#365601
  - Do not return Advertise message when receiving a Solicit message with SID
    Resolves: rhbz#365621
  - Do not return Reply message when receiving a Confirm message with SID
    Resolves: rhbz#365631
  - Do not return Reply message when receiving a Rebind message with SID
    Resolves: rhbz#365641
  - Check IA options of the received Advertise message
    Resolves: rhbz#365651
  - Set status code of Advertise message to NoAddrAvail when necessary
    Resolves: rhbz#365661
  - Fix About RT(Retransmission Time) problem
    Resolves: rhbz#376901
  - Fix About RD(Retransmission Duration) problem
    Resolves: rhbz#376921
  - Send Rebind messages correctly
    Resolves: rhbz#376931
  - Send Renew messages correctly
    Resolves: rhbz#376941
  - Send Echo Reply to calling server correctly
    Resolves: rhbz#377091
  - Keep DUID consistent between reboots and such
    Resolves: rhbz#377101
  - Honor requested options from the client
    Resolves: rhbz#377111
  - Send DNS Query message correctly
    Resolves: rhbz#377131
  - Send Information Request message correctly
    Resolves: rhbz#377161
  - Find correct option code
    Resolves: rhbz#377191
  - Do not return Reply message when receiving an Information Request message
    via unicast
    Resolves: rhbz#377221
  - Do not display invalid error messages on terminal when running dhcp6r
    Resolves: rhbz#377231
  - Do not include non-requested options in Reply messages
    Resolves: rhbz#426899


author: David Cantrell <dcantrell@redhat.com> - 1.0.4-1
changelog:
  - Rebase to dhcpv6-1.0.4
  - Renamed dhcpv6_client package to dhcpv6-client
  - Added libdhcp6client-static package
  - BR kernel-headers


author: David Cantrell <dcantrell@redhat.com> - 0.10-34
changelog:
  - Store elapsed time value correctly in solicit message
    Resolves: rhbz#249451
  - Reassign global address after confirm/reply in dhcp6c
    Resolves: rhbz#249466
  - Retransmit confirm message in expected duration in dhcp6c
    Resolves: rhbz#251192
  - In dhcp6c, ignore reply message that contains IA_NA with T1 > T2
    Resolves: rhbz#254194
  - Do not let dhcp6c remove leases that are not on the updated list
    Resolves: rhbz#265761


author: David Cantrell <dcantrell@redhat.com> - 0.10-33
changelog:
  - server6_addr.conf is not required for dhcp6s
  - Resolves: rhbz#217309
  - Man page for dhcp6s.conf should reference server-preference
  - Resolves: rhbz#217308


author: Jason Vas Dias <jvdias@redhat.com> - 0.10-30
changelog:
  - fix bug 196429: 
    Allow clients from dhcpv6-0.10<=16 to get addresses. 
    >16, the server sent the prefix length; this is now
    conditional on the client sending the DHC6OPT_REQUEST_PREFIX,
    and can be disabled by the 'use-ra-prefix' dhcp6c.conf or 
    dhcp6s.conf setting. With the upstream version, the only
    way to set the clients' address prefixes was by router
    advertisement.


author: Jason Vas Dias<jvdias@redhat.com> 0.10-26
changelog:
  - libdhcp6client fix to retry bind() to linklocal address
    on EADDRNOTAVAIL for up to 5 seconds to give kernel time
    to create linklocal address.


author: Jason Vas Dias <jvdias@redhat.com> - 0.10-18
changelog:
  - Make server send client the IPv6 address prefix in address lease;
    make client use it 
  - prevent netlink.c generating error log message for NLMSG_DONE
  - fix netlink.c IFLA_PROTINFO handling now that kernel defines it
  - fix memory leak in client6_addr create_iaid
  - disable 'install -s' for binaries


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - fix bug 165882: allow client to configure an interface which
    does not have an IPv4 address ( use getifaddrs instead of
    ioctl(sockfd, SIOGIFCONF, ...)
  - fix bug 165884 (possibly!): force use of glibc's getifaddrs,
    not internal getifaddrs implementation


author: Jason Vas Dias <jvdias@redhat.com> - 0.10-11
changelog:
  - Add 'prefix-delegation-interface' option to allow write
  - of radvd interface configuration other than that for 
  - the interface the lease was received on.


author: Jason Vas Dias <jvdias@redhat.com> - 0.10-10
changelog:
  - Add Relay Agent support. Thanks to  Brian Bluesker<bbuesker@qualcomm.com>
  - for the patch to add relay support to the server and for submitting the 
  - patch originally contributed by Cristian Cadar of NEC Europe to 
  - DHCPv6-developer  mailing list.


author: Jason Vas Dias <jvdias@redhat.com> - 0.10-2
changelog:
  - Split into two packages: dhcpv6-*, containing server only,
  - and dhcpv6_client-*, containing client only.


author: Jindrich Novy <jnovy@redhat.com> 0.98.39-1
changelog:
  - update to 0.98.39
  - add BuildRequires ghostscript, texinfo to doc subpackage (#110584)
  - generate also PDF documentation for nasm (#88431)
  - new release fixes CAN-2004-1287 (#143052)


author: Trond Eivind Glomsrød <teg@redhat.com> 0.98.32-1
changelog:
  - 0.98.32
  - Various doc files have changed names/been removed/added
  - New download location (after the license change, it's at sourceforge)
  - The new version is LGPL
  - Only build on x86 (#65255)


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:1.03-0.fdr.1
changelog:
  - Update to 1.03.
  - Relocation of debug*.list files during the tests in order to avoid problems
    with Module::Signature (files not listed in MANIFEST).


author: Bill Nottingham <notting@redhat.com> - 11-1
changelog:
  - pirut/anaconda now use 24x24. update sizes
  - various additions/removals
  - python scripts aren't useful with current repositories, remove them


author: Karel Zak <kzak@redhat.com> 5:6.1.5-4.1
changelog:
  - fix #219437 - amd: stopping service will pop up an error dialog in 
                  system-config-services app.
  - fix build (m4 stuff) of the package (UTS_RELEASE macro has been removed 
                  from the latest kernel-headers)


author: Peter Vrabec <pvrabec@redhat.com> 5:6.1.5-2
changelog:
  - force to use HAVE_LINUX_NFS_MOUNT_H macro, because linux/nfs_mount.h 
    check in configure fails on s390x


author: Peter Vrabec <pvrabec@redhat.com> 6.1.2.1-1
changelog:
  - upgrade
  - fix amd shutdown(#158268,#54246) 	
  - enhancement, /host/localhost and /host/<localmachinename> 
    are symlinks to / (#11843)


author: Peter Vrabec <pvrabec@redhat.com> 6.0.9-12
changelog:
  - fix the am-utils part of #143118 by implementing the util-linux
    mtab locking scheme into am-utils automounter, patch and testing
    by Daniel Berrange <berrange@redhat.com>, improved locking
    algorithm by <prockai@redhat.com> (which allows for several 
    hundred or even thousand of parallel makes to finish 
    successfully and keep /etc/mtab in sync with /proc/mounts  as well)


author: Nalin Dahyabhai <nalin@redhat.com> 6.0.9-1
changelog:
  - update to 6.0.9
  - disable RPM's internal dependency calculation so that we can filter out
    dependencies which are expected to be filled in by the site administrator


author: Nalin Dahyabhai <nalin@redhat.com> 6.0.7-1
changelog:
  - update to 6.0.7, fixing EIO on access bugs (#53251)
  - back out nfs3 patch; no longer needed for current kernels
  - don't explicitly strip binaries; let the buildroot policies handle it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add BuildPrereq: db1-devel (#44987)
  - use FHS macros
  - return error codes correctly from init script (#44597)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add ldconfig to %postun
  - chuck the hesiod patch -- new bind-utils doesn't have the support for it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - only create /var/lock/subsys/amd if startup succeeds
  - revamp shutdown procedure to minimize time spent just spinning
  - change initscripts dependency to /etc/init.d


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - version 6.0.3
  - enhance init script to be more wait4amd2die-like
  - make default map type to be file (#9185)
  - get rid of the kludges


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - remove the noldap patch
  - add amd.net file as the default config map file
  - change the config file to teh new config file format instead of a
    simple map file name.
  - try to avoid some damage with a new %pre script
  - prereq grep now
  - modify the init file so it calls amd -F /etc/amd.conf now


author: Soren Sandmann <sandmann@redhat.com> - 2.0.2-7.0.2
changelog:
  - Add -Wformat-nonliteral to CXX- and CFLAGS
  - In format-string.patch, add G_GNUC_PRINTF as appropriate. Fix the
    resulting warnings. Bug 229262


author: Soren Sandmann <sandmann@redhat.com> - 2.0.2-7.0.1
changelog:
  - Build with n-v-r that follows guidelines at

       http://intranet.corp.redhat.com/ic/intranet/UpdateModelNVRProposal.html


author: Soren Sandmann <sandmann@redhat.com> - 2.0.2-9
changelog:
  - Change format-string patch to also fix a bug where a va_list was
    passed to a vararg function. Bug 229259


author: Rafael Schloming <rafaels@redhat.com> - 0.1.897961-1
changelog:
  - Added groups to subpackages.
  - Replaced python_sitelib with python_sitearch, use %global instead of %define, and killed unused ruby_sitelib.


author: Akira TAGOH <tagoh@redhat.com> - 003.02-3.1
changelog:
  - Get rid of fontpackages dependency for RHEL-5.
  - Add Requires: fontconfig
  - Do not make a symlink onto /etc/fonts/conf.d.
  - roll back the release to keep it less than RHEL-6's.


author: Akira TAGOH <tagoh@redhat.com> - 003.02-4.1
changelog:
  - Backport from Fedora.
  - Improve the fontconfig config file further more to match ja as well. (#586837)


author: Doug Ledford <dledford@redhat.com> - 0.4-3
changelog:
  - Rebuild against updated libibmad and libibumad libraries
  - Only need to build require libibmad, it pulls in libibumad
  - Resolves: bz451466


author: Bob Relyea <rrelyea@redhat.com> - 1.2.1-1
changelog:
  - Pick up ccid 1.2.1
  - use pcscd 'hotplug' feature instead of restarting the daemon
  - add enable_udev


author: Adam Tkac <atkac redhat com> 0.4b41-4
changelog:
  - display dump level correctly in all cases (#493635)
  - -A option is not valid when -P is specified, correct manual page (#490627)
  - fix typos in manual pages (#489853)


author: Jindrich Novy <jnovy@redhat.com> 0.4b41-2.fc6
changelog:
  - fix miscompares detected by restore -C caused by SELinux (#189845)
  - link properly against device-mapper and selinux libraries
  - add autoconf BuildRequires
  - use %{?dist}


author: Jindrich Novy <jnovy@redhat.com> 0.4b41-1
changelog:
  - update to 0.4b41
  - drop .fixacl patch, now applied in the new upstream release
  - link against device-mapper


author: Jindrich Novy <jnovy@redhat.com> 0.4b39-2
changelog:
  - Updated the EA patch with support for in-inode EAs, big
    inodes and fixes 'error in EA block' displayed for
    every single inode (#149299) - patch from Stelian Pop


author: Jindrich Novy <jnovy@redhat.com> 0.4b38-1
changelog:
  - Updated to dump 0.4b38 (#144840)
  - Updated the experimental dump patch.
  - Dropped the cvs patch, applied in the upstream release.


author: Mike A. Harris <mharris@redhat.com> 0.4b27-3
changelog:
  - BuildRequires readline-devel >= 4.2 for the rl_completion_matches function
  - Added dump-0.4b27-dump-atomic-read-write.patch to avoid namespace conflict
    with included kernel headers.  atomic_read is a function on s390 and as
    such, cannot be #undef'd


author: Mike A. Harris <mharris@redhat.com> 0.4b27-2
changelog:
  - Added prereq on "setup" to ensure disk group is created prior to this
    package being installed
  - Somehow the dump package changelog got hosed, and part of the spec file
    regressed.  I believe it is fixed now.


author: Mike A. Harris <mharris@redhat.com> 0.4b25-1.72.0
changelog:
  - Rebuilt 0.4b25 for erratum release.  Fixes various bugs that have been
    reported in bugzilla which are logged below.  Also fixes a bug caused by
    linking statically to a faulty system library.
  - Added Provides dump-static line


author: Mike A. Harris <mharris@redhat.com> 0.4b25-1
changelog:
  - Updated to version 0.4b25-1
  - Added homepage URL for RFE (#54601)
  - Also fixed in this release are (#21272, #52663, #56616)
  - Dropped time.h patch as it is unneeded now


author: Mike A. Harris <mharris@redhat.com> 0.4b22-7
changelog:
  - Updated BuildPreReq to e2fsprogs-devel >= 1.18, readline-devel >= 4.1 to
    explicitly state the minimum required deps and fix (#51900)


author: Trond Eivind Glomsrød <teg@redhat.com> 0.4b22-6
changelog:
  - Kill the static subpackage - the standard binaries are now static
    This removes /usb/sbin/*. The static versions are now in /sbin 
    (#53433)
  - Obsolete dump-static


author: Mike A. Harris <mharris@redhat.com> 0.4b22-2
changelog:
  - Removed release tag from buildroot dirname - messy.
  - Broke all lines over multiple lines for readability in specfile.
  - Added --enable-largefile configure flags


author: Preston Brown <pbrown@redhat.com>
changelog:
  - whoops I had dump commented out of the file list.  fixed.
  - dropped suid bits on the static binaries.
  - fix char buffer size issue (#11880)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - workaround egcs bug (#4281) that caused dump problems (#2989).
  - use sigjmp_buf, not jmp_buf (#3260).
  - invoke /etc/rmt (instead of rmt) like other unices. (#3272).
  - use glibc21 err/glob rather than the internal compatibility routines.
  - wire $(OPT) throughout Makefile's.
  - fix many printf problems, mostly lint clean.
  - merge SuSE, Debian and many OpenBSD fixes.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - restore original 6755 root.tty to dump/restore, defattr did tty->root (#684).
  - mark /etc/dumpdates as noreplace.


author: Ray Strode <rstrode@redhat.com> - 2.16.0-14.el5
changelog:
  - prefer smart card drivers found in system secmod db over the
    hardcoded /usr/lib/pkcs11/libcoolkeypk11.so


author: Ray Strode <rstrode@redhat.com> - 2.16.0-12.el5
changelog:
  - have security token monitor helper process kill itself when 
    the communication pipe to the main process goes away (bug
    210677).


author: Ray Strode <rstrode@redhat.com> - 2.16.0-11.el5
changelog:
  - report token events from helper process using token name instead
    of slot id and slot series number, since slot id and slot series
    number are relative to each process (bug 208018)


author: Ray Strode <rstrode@redhat.com> - 2.16.0-9.el5
changelog:
  - handle PAM messages in a separate thread so that when a pam
    module blocks, the cancel button still works (bug 206322)
  - set cursor to busy while waiting on pam module (bug 202276)
  - hide prompt label/entry/unlock button until pam asks the
    user for input (bug 202276)
  - dont assume first pam message will be "Password:" 
    (bug 201858, 202278)


author: Ray Strode <rstrode@redhat.com> - 2.15.4-6
changelog:
  - don't listen for smart card events unless session was
    initiated after smart card authentication.
  - update lock dialog UI in between individual pam messages


author: Ray Strode <rstrode@redhat.com> - 2.15.4-3
changelog:
  - only lock screen if screen locking is enabled and the token
    pulled out is a login token (requires uncommited changes to 
    pam_pkcs11).


author: Ray Strode <rstrode@redhat.com> - 2.13.5-4
changelog:
  - throttle cpu usage in floaters screensaver to allow things
    like background compiles to be faster (bug 178496).


author: Ray Strode <rstrode@redhat.com> - 0.0.23-1
changelog:
  - Update to 0.0.23
  - remove floaters screensaver engine patch (it's upstreamed)
  - keep fedora branded parts


author: Benjamin Marzinksi <bmarzins@redhat.com> 0.4.7-38.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_24
  - Resolves: bz #484419, #559852, #560892, #566685, #568127, #570513, #574813, #576600, #585225, #599686


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-34.el5
changelog:
  - Added 545822_fix_part2.patch
  - Added 554830_fix.patch
  - Fixed Invista default config, and typo in multipath.conf man page.
  - Resolves: bz #545822, #554830


author: Benjamin Marzinski <bmarzins@redaht.com> 0.4.7-33.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_19
  - Added new multipath.conf option "checker_timeout". If this is not set the
    checker functions with explicit timeouts use /sys/block/sd<x>/device/timeout
  - Resolves: bz #553042


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-31.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_17
  - Resolves: bz #526550, #518575, #512243, #531744, #540882, #537977, #437585, #472171, #473039, #481239, #502128, #510331, #517896, #501019, #524009, #537281, #475967, #499080, #504619, #515171, #524178, #527754, #532424


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-27.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_16
  - Resolves: bz #437588, #474451, #462776, #477023, #485296, #489030, #481227, #484711


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-25.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_14
  - Resolves: bz #452897, #480048, #457776, #459629, #470896, #493402


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-19.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_13
  - Resolves: bz #238421, #419581, #449097, #455692, #456126, #456228, #457226


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-18.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_12
  - Resolves: bz #431843, #434588, #434988, #439366, #440123, #442000, #444421, #446223, #448655, #454928


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-15.el5
changelog:
  - All non-static path_prio callouts are now just symlinks to the static
    ones
  - Resolves: bz #355961


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-14.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_10
  - Resolves: bz #226791, #247443, #249088, #251346, #335021, #354661, #355961


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-10.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_5
  - Resolves: #214838, #223146, #223150, #223762, #231545, #241189, #242723, #243483


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.7-8.el5
changelog:
  - Update to latest source, t0_4_7_rhel5_2
  - Resolves bz #219804
  - filesystems made on dasd devices may need to be rebuild after upgrading
    to this version.


author: Peter Jones <pjones@redhat.com> - 0.4.7-4.1
changelog:
  - Split kpartx out into its own package so dmraid can use it without
    installing multipathd
  - Fix a segfault in kpartx


author: Mike A. Harris <mharris@redhat.com> 0.3.5.4-1
changelog:
  - Updated xorg-x11-drv-s3 to version 0.3.5.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Matthew Wringe <mwringe at redhat.com> - 0:4.0-3jpp_1fc
changelog:
  - Merged with upstream version
  - Changed directory locations to rpm macros
  - Added conditional native compiling


author: Doug Ledford <dledford@redhat.com> - 1.1.99-10
changelog:
  - Add an epoch back in (evidently when libsdp was part of the openib package
    it had an epoch that was missed when it was split out)
  - Resolves: bz448733


author: Tomas Bzatek <tbzatek@redhat.com> - 2.16.2-5.el5
changelog:
  - Fix daemon restart due to invalid utf-8 device file (#486286)
  - Fix Search stops upon encountering an unreadable directory (#432764)
  - Fix moving files between different NFS mounts (#438116)
  - Copy file when following symlink (#481593)
  - DAV: Handle filenames with reserved chars (#503112)


author: Alexander Larsson <alexl@redhat.com> - 2.16.0-2
changelog:
  - Backport fixes from cvs:
  -  Fix crash on shutdown (gnome bug 347470)
  -  Import gtk+ fixes to xdgmime


author: Alexander Larsson <alexl@redhat.com> 2.12.1.1-4
changelog:
  - Remove XFree86-devel buildreq, as it doesn't exist anymore.
    I don't think we actually require it.


author: John (J5) Palmieir <johnp@redhat.com> 2.12.0-2
changelog:
  - Backported patch to fix bug #167985 which corrects the size of a
    readlink buffer
  - Added a patch to fix bug #168743 which corrects the name of a
    data member from close to close_fn


author: David Zeuthen <davidz@redhat.com> 2.11.90-2
changelog:
  - Disable a few patches that are upstream/irrelavant
  - Add patch to detect mounts from drives we cannot poll


author: Matthias Clasen <mclasen@redhat.com> 2.11.90-1
changelog:
  - New upstream version
  - Remove patches and sources for the desktop method, since
    we don't have start-here in the UI anymore.


author: Alexander Larsson <alexl@redhat.com> - 2.8.1-6
changelog:
  - Add cvs-backport patch with various fixed from HEAD, including
    a partial fix for #134627
  - Removed the patches that are in the cvs-backport patch.


author: Ray Strode <rstrode@redhat.com> 2.8.1-3
changelog:
  - Swap if and else in egg_desktop_entries_get_locale_encoding
    to prevent allocating massive amounts of unneeded ram.


author: Mark McLoughlin <markmc@redhat.com> 2.8.1-2
changelog:
  - Remove menu-only-show-in patch - latest KDE packages don't use
    non-standard <OnlyShowIn> anymore


author: Mark McLoughlin <markmc@redhat.com> 2.7.90-1
changelog:
  - Update to 2.7.90
  - Remove cvs-backport patch
  - Add BuildRequires for krb5-devel, howl-devel and hal-devel
  - Fixup the schema-about and mozilla patches


author: Dan Williams <dcbw@redhat.com> 2.6.0-7
changelog:
  - Update to desktop-file-utils 0.6
  - Implement monitoring to detect addition/deletion of .desktop files
  - Fix RH #118553, crash when reading symlink that points to
      nothing in libmenu.so VFS backend


author: Dan Williams <dcbw@redhat.com> 2.5.90-2
changelog:
  - Add desktop-file-utils to build the new libmenu.so VFS backend
      for .menu files.  Its a hack for now, and will eventually
      be replaced by upstreaming the d-f-u code


author: Havoc Pennington <hp@redhat.com>
changelog:
  - it would help to *install* the stupid menu edit conf file
  - update the vfolder-hacks patch with some fixes


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Revert to George's vfolder backend from gnome-vfs-2.0.2 or so
  - put back libdesktop.so
  - don't build the new vfolder backend


author: Havoc Pennington <hp@redhat.com>
changelog:
  - add patch for OnlyShowIn support
  - use plain menu files for .vfolder-info-default
  - don't install unused vfolder-info files


author: Havoc Pennington <hp@redhat.com>
changelog:
  - require new gnome-mime-data in proper libdir
  - 2.0.4
  - drop most patches as they are now upstream or 
    don't apply to new vfolder code


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild cvs snap with changes merged upstream
  - fix a requires
  - fix up requires/buildrequires a bit


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Add pkgconfig and gnome-libs-devel build reqs.
  - Remove dependency on gnome-vfs-devel by doing some
  - CPPFLAGS and LDFLAGS magic


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Remove Distribution and Vendor
  - Make the config files noreplace
  - Move .so links to devel subpackage
  - langify
  - Add BuildRequires
  - Don't mess with /etc/ld.so.conf
  - Use %{_tmppath}
  - s/Copyright/License/


author: Jan Iven
changelog:
  - further restrict what a local client can do,
  remove the full 'server" line for localhost unless we have clients ourselves.


author: Jan Iven,31-2009,74957,
changelog:
  - write a more restrictive configuration; add support for NTP client networks; some more debug/info messages; one pass per config file only


author: Thorsten Kleinwort
changelog:
  - This component creates a warning if a time server cannot be resolved in DNS, and an error if there are no valid time servers in the configuration


author: Tim Waugh <twaugh@redhat.com> 1.73-3
changelog:
  - Conflict with docbook-utils if its custom stylesheet hasn't been
    updated to work with version 1.72 or later of this package.


author: Tim Waugh <twaugh@redhat.com> 1.64-1
changelog:
  - 1.64 (fixes #38095).
  - Fix up post/preun scripts so that we don't get duplicate entries with
    different versions on upgrade.


author: Tim Waugh <twaugh@redhat.com> 1.59-10
changelog:
  - Fix up Makefile (patch from SATO Satoru).
  - Change postun to preun.
  - Make preun conditional on remove rather than upgrade.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change Requires(...) to PreReq at Preston's request.
  - PreReq at least openjade-1.3-12, so that its catalogs get installed.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Don't play so many macro games.
  - Change requirement on /usr/bin/install-catalog to sgml-common.
  - Be sure to own dsssl-stylesheets-1.59 directory.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change group.
  - openjade not jade.
  - %{_tmppath}.
  - rm before install.
  - Change Copyright: to License:.
  - Remove Packager: line.


author: Jindrich Novy <jnovy@redhat.com> 0.9.8.1-5
changelog:
  - apply official bugfix patches (#164363)
    - fixes slrnpull problem with group containing no headers
    - fixes last character removal editor problem


author: Jindrich Novy <jnovy@redhat.com> 0.9.8.1-3
changelog:
  - package contrib subdir because of slrn-conv script (#73451)
  - slrnpull.conf is now %config(noreplace), original config
    won't be overwritten (#56001)
  - include slrnpull man page


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7.4-6
changelog:
  - configure with --with-ssl-includes=%{_includedir} and
    --with-ssl-library=%{_libdir}, for multilib systems


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 0.9.6.4
  - enable SSL
  - plug some possible buffer overflows (#12750)
  - install sample macros in /usr/lib/slrn


author: Manoj Kasichainula <manojk+rpm@io.com>
changelog:
  [0.9.5.3-2]
  - Fixed a couple of stupid things I did.
  - Took out -fno-strength-reduce. AFAIK, gcc on RH5.1 doesn't have this bug. I
    use egcs which shouldn't have this bug. And if you have this bug, *and* are
    recompiling on your own machin, you should have -fno-strength-reduce in your
    RPM_OPT_FLAGS anyway.


author: Manoj Kasichainula <manojk+rpm@io.com>
changelog:
  - docs are now forced to 644 to prevent including /bin/sh as a requirement
  - added macros in the doc directory
  - should now be buildable by non-root


author: Manoj Kasichainula <manojk+rpm@io.com> (0.9.4.3-2)
changelog:
  - Fixes from JED
  - default mode for slrnpull posts set to 0640, so slrnpull can read it as
    non-root
  - lots of pre-setup for slrnpull
    - directories set up
    - automatic daily expiration
    - moved slrnpull directory to /var/spool/slrnpull, to match (most) docs
    - more 
  - minor spec file changes


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Updated all packages to version 1.0.0 from X11R7 RC4
  - Added new lndir, gccmakedep tarballs.  (#173478)
  - Changed manpage dirs from man1x to man1 to match upstream RC4 default.
  - Removed all previous 'misc' patch, as we now pass --with-config-dir to
    configure to specify the location of the Imake config files.
  - Renamed imake patch to xorg-cf-files-1.0.0-ProjectRoot.patch as it did not
    patch imake at all.  This should probably be changed to be a custom Red Hat
    host.def file that is added as a source line instead of randomly patching
    various files.


author: Than Ngo <than@redhat.com> 0.99.2-2
changelog:
  - fix xmkmf to look config files in /usr/share/X11/config
    instead /usr/%{_lib}/X11/config/
  - add host.conf


author: Karsten Hopp <karsten@redhat.com> 1.9.6-2.3
changelog:
  - increase delay in self checks
  - add delays in aclocal7 self check
    http://osdir.com/ml/sysutils.automake.bugs/2006-09/msg00012.html
  - preserve timestamps of configure files


author: Daniel Reed <djr@redhat.com> 1.9.4-1
changelog:
  - version bump
    - Portability nits in install-sh and mdata-sh.
    - Don't let `make install' fails if a _JAVA primary becomes empty
      because of conditionals.
    - Do not confuse CHANGELOG with ChangeLog on case-insensitive
      case-preserving file systems (likewise for all automatically
      distributed files).
    - Do not embed $DESTDIR in Python's byte-code files.
    - Work around programs that read stdin when checking for --version
      and --help options (when the `std-options' is used).
    - Fix AM_PATH_PYTHON to correctly define PYTHON as `:' when no minimum
      version was supplied and no interpreter is found.


author: Daniel Reed <djr@redhat.com> 1.9.3-1
changelog:
  - version bump
    - Dependency tracking using mode "dashmstdout" or "dashXmstdout" did not work for libtool objects compiled with --tag (i.e., compiled with Libtool 1.5 or later). The compilation would succeed, but `depcomp' would emit a warning and not output any dependency information.
    - Ignore comments from augmented variables ...
    - `install-sh -d a/b/' failed to create `a/b/' because of the trailing `/'.
    - _PROGRAMS now always create programs. Before 1.9 it would mistakenly create a libtool library if the name of the program ended in `.la'.
    - `compile' now handles `*.obj' objects.
    - `aclocal' recognizes AC_DEFUN_ONCE.


author: Daniel Reed <djr@redhat.com> - 1.9.2-1
changelog:
  - version bump
    - Sort rm commands output for mostlyclean-generic, clean-generic, distclean-generic and maintainer-clean-generic, so that the produced Makefile is not sensitive to the way Perl sorts its hashes.
    - Support `+' in the name of directories given to `include'.
    - Preserve spaces in the arguments of `compile'.
    - `missing' will no longer try to emulate a tool that is run with `--version' or `--help' as argument.
    - There is a new chapter about the history of Automake.


author: Daniel Reed <djr@redhat.com> - 1.9.1-1
changelog:
  - version bump
    - Adjust #line directives in `parser.h' (when ylwrap is not used). (PR/432)
    - Fix definition of YLWRAP when ylwrap is installed in a default aux directory found in a parent package.
    - Properly recognize AC_CANONICAL_BUILD and AC_CANONICAL_TARGET.


author: Jens Petersen <petersen@redhat.com> - 1.8-1
changelog:
  - update to 1.8 release
  - require autoconf 2.58 or later
  - don't use %configure for now to prevent very recent configure from running
    "config.sub noarch-redhat-linux"


author: Jens Petersen <petersen@redhat.com> 1.6.3-2
changelog:
  - add "--without check" rpmbuild option to switch "make check" off
  - exclude info dir file
  - don't gzip info files explicitly


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.5-4
changelog:
  - Completely back out the fix for #56624 for now, it causes more problems
    than it fixes in either form.


author: Jens Petersen <petersen@redhat.com> - 1.4p5-2
changelog:
  - dont raise error when there is source in a subdirectory (bug #35156).
    This was preventing automake from working in binutuls/gas 
    [patch from HJ Lu <hjl@gnu.org>]
  - format long lines of output properly with backslash + newlines as in 1.4
    (bug #35259) [patch from HJ Lu <hjl@gnu.org>]


author: Jens Petersen <petersen@redhat.com> - 1.5-8
changelog:
  - add patch from 1.6 branch to fix #89619 [thanks to hjl@gnu.org]
  - run build tests by default
  - add --without-check build option
  - update dirname.test to 1.6 version so it doesn't fail
  - buildrequire autoconf
  - don't look for autoconf253 files in missing
  - add info files to doc dir
  - update description


author: Jens Petersen <petersen@redhat.com> 1.5-2
changelog:
  - make "missing" look for versioned auto* scripts by default (#61591).
    Suggested by enrico.scholz@informatik.tu-chemnitz.de


author: Jens Petersen <petersen@redhat.com> 1.5-1
changelog:
  - new package based on automake-1.5
  - version datadir and no longer make symlinks in bindir
  - exclude info files


author: Elliot Lee <sopwith@redhat.com> 0.6.12-6
changelog:
  - tetex-dvips requirement should go on main package (not just pdf 
    subpackage) because docbook2ps requires dvips too.


author: Tim Waugh <twaugh@redhat.com> 0.6.10-2
changelog:
  - Don't define %graphic-default-extension% in the stylesheet---it messes
    up PS+PDF output from the same source.


author: Tim Waugh <twaugh@redhat.com> 0.6.10-1
changelog:
  - 0.6.10.
  - No longer need automake files.
  - No longer need '.', jw-custom, '@', pdf, nochunks, txt, '-o', manpage,
    sdata, help, ol, '-V', sgml_xml, excl, link, pagesize, or texinputs
    patches.


author: Tim Waugh <twaugh@redhat.com> 0.6.9-21
changelog:
  - Edited the wrong file when making the patch.. fix breakage introduced
    by trying to fix bug #58375.


author: Tim Waugh <twaugh@redhat.com> 0.6.9-20
changelog:
  - Fix docbook frontend (bug #51478).
  - Make the old db2html script understand the .xml filename extension
    (bug #59194).
  - Determine page size to use automatically from LC_PAPER (bug #58375).


author: Tim Waugh <twaugh@redhat.com> 0.6.9-9
changelog:
  - Actually apply the patch that makes man backend understand &minus;.
  - Also don't redefine <comment> and <remark> for HTML output either.


author: Tim Waugh <twaugh@redhat.com> 0.6.9-8
changelog:
  - Default stylesheet: <comment> and <remark> as rationale markers
    probably isn't really appropriate for general use.
  - Default stylesheet: larger top margin to make some RTF readers
    happy (bug #56011).
  - Make man backend understand &minus;.
  - Specfile cleanups (%{_bindir}, %{_docdir}).


author: Tim Waugh <twaugh@redhat.com> 0.6.9-6
changelog:
  - Explicit synopsis for each docbook2[xxx] command in the jw man page.
  - Clean up all temporary files in pdf backend.


author: Tim Waugh <twaugh@redhat.com> 0.6.9-4
changelog:
  - Adjust stylesheet so that it works with docbook-dsssl 1.72.
  - Fix jw so that -o and -d can be used together (bug #53546).


author: Tim Waugh <twaugh@redhat.com> 0.6.9-3
changelog:
  - Fix txt backend so that it works.
  - Fix jw so that it uses the HTML stylesheet for text backends.
  - Use links if lynx isn't available, in txt backend.


author: Tim Waugh <twaugh@redhat.com> 0.6-14
changelog:
  - db2html: copy admon graphics to output directory (bug #40143).
  - Require docbook-style-dsssl 1.64-2 for symbolic link used by db2html.
  - db2html: handle arguments with spaces better.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fix argument parsing in docbook2xxx (bug #31518).
  - Fix argument passing in db2html (bug #31520).
  - Fix pdf generation (bug #31524).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Only create output directory for db2html (bug #27092). (docbook2html
    does not create an output directory in the upstream version, but
    the compatibility script has been made to do so.)


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change group.
  - Use %{_mandir} and %{_prefix}.
  - db2* symlinks.
  - Obsolete stylesheets (and -db2pdf).
  - Change Copyright: to License:.
  - Remove Packager: line.
  - Reword description.


author: Mike A. Harris <mharris@redhat.com> 1.1.6-2
changelog:
  - Added "BuildRequires: xorg-x11-proto-devel"
  - Added "Requires: xorg-x11-proto-devel" to devel package, needed by xcursor.pc
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 1.1.5.1-1
changelog:
  - Updated libXcursor to version 1.1.5.1 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.
  - Added default index.theme file to set BlueCurve as the default cursor theme
    to fix bug (#175532).


author: Mike A. Harris <mharris@redhat.com> 1.1.5-1
changelog:
  - Updated libXcursor to version 1.1.5 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Michal Hlavinka <mhlavink@redhat.com> 20091206-1
changelog:
  - updated to 20091211
  - fix looped job list (#435159)
  - fix error code when unsetting a variable that was already unset (#508869)
  - restore shell state when return was used in .profile (#506790)
  - wait for output of background process after foreground's completed (#509326)
  - fix parser failure when alias nested in emacs mode (#513967)
  - don't mention unavailable commands in man pages (#514485)
  - ship RELEASE in doc as change log (#541654)


author: Michal Hlavinka <mhlavink@redhat.com> 20080202-15
changelog:
  - fix wrong array size caused by typeset (#538857)
  - fix pids of forked commands (#520383)
  - fix memcmp-memcpy typo causing syntax error (#538655)


author: Michal Hlavinka <mhlavink@redhat.com> 20080202-12
changelog:
  - make braces non-optional for ${a[i]} inside [[...]] in the case
    where the argument can be a pattern.


author: Michal Hlavinka <mhlavink@redhat.com> 20080202-11
changelog:
  - prevent rpmbuild creating debuginfo for %ghost files (#488798)
  - don't segfault for inaccessible history file (#494363)
  - add COMPATIBILITY file to the %doc (#494534)
  - use old language catalog, because the new one is broken (#493570)


author: Michal Hlavinka <mhlavink@redhat.com> 20080202-7
changelog:
  - fix unexpected behaviour of typeset [options] name=value
  - resolves: #489516
  - fix alternatives for ksh update, when there wasn't alternatives yet


author: Michal Hlavinka <mhlavink@redhat.com> 20080202-5
changelog:
  - fix #488798 - use 'alternatives' for ksh switching
  - fix #485030 - Umask value not restored when returning from a subshell
  - fix #488934 - ksh does not declare shell variables with hyphen


author: Tomas Smetana <tsmetana@redhat.com> 20080202-2
changelog:
  - fix #459228 - option -R not clear
  - fix #459566 - segfault on set -o vi
  - fix #456652 - exit shifts vi to background


author: Tomas Smetana <tsmetana@redhat.com> 20080202-1
changelog:
  - rebase to the new version
  - fix #371441 - can't display international characters
  - fix #429488 - ksh -R can cause segmentation fault
  - fix #435159 - scripts failing under ksh
  - fix #441557 - the -m option removed from the manual page


author: Tomas Smetana <tsmetana@redhat.com> 20060214-1.5
changelog:
  - fix #242879 - memory leak
  - fix #232627 - call to exit(0) returns a status 19 
    to the calling shell script
  - fix #242878 - spins in stopped state
  - fix #243776 - ERR trap causes recursion
  - fix #219420 - unaligned access messages
  - fix #242877 - filesystem acl defaults are ignored
  - fix #278781 - fix handling of sigttou
  - fix #250362 - update manpage about subscript of index array


author: Jonathan Brassow <jbrassow@redhat.com>
changelog:
  - Fix possible corruption issue on mirrors with more than 2 images
  - Fix I/O hang after cluster mirror creation with '--nosync' flag
  - Resolves: rhbz#456575 rhbz#471291


author: Chris Feist <cfeist@redhat.com>
changelog:
  - Init script no longer throws errors on 'stop'.
  - Cmirror no longer generates errors if openais stops.
  - Mixed architecture and rolling upgrade issues have been fixed.
  - Resolves: rhbz#488102 rhbz#518665 rhbz#520915


author: Chris Feist <cfeist@redhat.com>
changelog:
  - Local UIDs are now used to prevent more than one log created with the
    same UUID.
  - Resolves: rhbz#506843


author: Chris Feist <cfeist@redhat.com>
changelog:
  - Fixed more issues which caused the copy percentage of a corelog mirror to
    get stuck.
  - Resolves: rhbz#474174 rhbz#491340


author: Chris Feist <cfeist@redhat.com>
changelog:
  - Copy percentage of corelog mirror no longer gets stuck in certain cases.
  - A segfault in clogd was fixed which was caused by mirrors being suspended
    quickly after being started.
  - During a sync attempt the copy percentage will no longer hang due to the
    receipt of stale checkpoint data.
  - Resolves: rhbz#474174 rhbz#484968 rhbz#491340


author: Chris Feist <cfeist@redhat.com>
changelog:
  - More list corrpution fixes
  - Fixed bug which can cause the sync percentage to go over 100.
  - Resolves: rhbz#464550


author: Chris Feist <cfeist@redhat.com>
changelog:
  - Fixed a checkpoint ordering issue, where a checkpoint could be populated
    with data from the wrong moment in time.
  - Fixed problem where resending requests when a server leaves would include
    requests that should have been recieved after the server had gone (so no
    resend should have been necessary).
  - Resolves: rhbz#464550


author: Chris Feist <cfeist@redhat.com>
changelog:
  - Allow time for exiting server responses to settle out before resending
    requests
  - Various debugging enhancements
  - Resolves: rhbz#464550 rhbz#464934


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2-35.4
changelog:
  - import Kees Cook's patch to fix accidental leakage of part of ./DB_CONFIG
    (#580542, CVE-2010-0826)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2-35.2
changelog:
  - when setting file contexts for creation of new files, only fail outright
    if we were in enforcing mode and the file needed to be given a specific
    label (#368281)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2-35
changelog:
  - add missing 'ed' builddep
  - set LDFLAGS and CPPFLAGS so that our local copy of DB is more likely to be
    found by the configure script


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-33
changelog:
  - update to db 4.3.28
  - correct a use of uninitialized memory in the bundled libdb (Arjan van de Ven)
  - obsolete the compat package, which is useless because current glibc wouldn't
    use it anyway


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - set errno to ENOENT by default so that we don't leave stale errno values
    around in error cases (#152467)
  - clear the entire key DBT before handing it to a get() function


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-30
changelog:
  - update to DB 4.3 (#140094)
  - add sample getent-based makefile as a doc file
  - pass S_IFREG to matchpathcon() to properly match contexts which are earmarked
    for only files


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-28
changelog:
  - set _filter_GLIBC_PRIVATE instead of overriding findrequires, so that file
    colors get marked correctly (originally #128436)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-27
changelog:
  - only provide a -compat subpackage on platforms where glibc provides
    compat NSS modules (%{ix86})
  - make -compat depend on the same version of the non-compat package


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-24
changelog:
  - disable use of RPM's internal dependency generator, which was preventing
    the filtering out of glibc private dependencies (#112849)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-18
changelog:
  - disable various language bindings when building the bundled DB library
  - remove unpackaged files from the buildroot in %install
  - don't install the compat version on arches where if we don't need one


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-8
changelog:
  - build using a bundled Berkeley DB with a unique name to avoid possible symbol
    collisions with binaries using different versions (mix multiple versions of
    any shared library in a single process, observe as wackiness ensues)


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-25
changelog:
  - Applied patch to fix cupsd memory corruption vulnerability
    (CVE-2010-2941, STR #3648, bug #624438).
  - Fix latent privilege escalation vulnerability (CVE-2010-2431,
    STR #3510, bug #605397).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-24
changelog:
  - Try to avoid overwriting text with page labels (STR #3415,
    bug #527187).
  - Reverted patch for bug #572338 as that and related bugs need a
    solution that can guarantee no regressions.


author: Jiri Popelka <jpopelka@redhat.com>
changelog:
  - Applied patch to avoid endless loop in
    socket backend process (bug #605584, STR #3001).
  - Applied patch to avoid infinite loop in
    mailto notifier (bug #608392, STR #3609).
  - Fixed typo in undo-str2537 patch (bug #608016).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-22
changelog:
  - Applied patch for CVE-2010-1748 (web interface memory disclosure,
    STR #3577, bug #591983).
  - Applied patch for CVE-2010-0542 (texttops unchecked memory
    allocation failure leading to NULL pointer dereference, STR #3516,
    bug #587746).
  - Applied patch for CVE-2010-0540 (CUPS administrator web interface
    CSRF, STR #3498, bug #588805).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-21
changelog:
  - Adjust texttops output to be in natural orientation (STR #3563).
    This fixes page-label orientation when texttops is used in the
    filter chain (bug #572338).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-16
changelog:
  - Applied patch to prevent memory leak when adding/modifying printers
    (bug #540646, STR #2836).
  - Applied patch to fix CVE-2009-3553 (bug #530111, STR #3200).
  - Applied patch to fix CVE-2009-2820 (bug #529833, STR #3367, STR #3401).


author: Jiri Popelka <jpopelka@redhat.com>
changelog:
  - Fixed lspp.patch to avoid memory leak (bug #496008).
  - Applied patches to enable changing of quotas
    with lpadmin (bug #496082, STR #3077, STR #3078).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Use poppler pdftops wrapper filter from upstream (bug #527429).  No
    longer need ext, includeifexists, strict-aliasing,
    CVE-2009-0146,0147,0166, cert-batch3892,4781,5486,19856,19869, or
    CVE-2009-3608,3609 patches.
  - Also fixes rotation of landscape documents when printed from OS X
    (bug #447987).


author: Jiri Popelka <jpopelka@redhat.com>
changelog:
  - Applied patch to prevent removing of multiple file job when
    the printer is disabled and enabled again (bug #506257, STR #3226).
  - Applied patch to fix issues with CGI handling (bug #497632, STR #2781, STR #2816).
  - Applied patch to fix incorrect CGI handling (bug #460898, STR #3194)
    and use php-cgi instead of php when running PHP scripts (bug #460898, STR #2923).


author: Jiri Popelka <jpopelka@redhat.com>
changelog:
  - Requires tmpwatch for the cron.daily script (bug #487495).
  - Applied patch to fix POSTing to custom cgi (bug #506316, STR #3221).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-13
changelog:
  - Include NULL pointer check in ObjectStream::getObject.  Part of the
    fix for CVE-2009-3608 (bug #526637).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-10
changelog:
  - Reverted php-cgi change due to incorrectly handling of CGI output
    that is not line-based (STR #3194, bug #460898).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-9
changelog:
  - Include printer-uri IPP attribute in IPP-Get-Jobs requests in order
    to be able to operate correctly with newer versions of CUPS
    (bug #497529, STR #2996, STR #3107, STR #3117).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Applied additional patches for batch3892.pdf, batch4781.pdf,
    batch5486.pdf, batch19856.pdf, batch19869.pdf testing files from
    CERT (bug #491864).
  - Applied patches to fix CVE-2009-0163 (bug #490596),
    CVE-2009-0146 (bug #490612), CVE-2009-0147 (bug #490614),
    and CVE-2009-0166 (bug #490625).
  - Fixed SendFF option in textonly filter (bug #491190).
  - Requires krb5 library that contains correct krb5_cc_new_unique()
    function (bug #489714).
  - MIME type detection fixes (bug #479635): always set document-name in
    client library (STR #3055) and fixed handle of "or" rules (STR #3059).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Don't verify MD5 sum, file size, or mtime for several config files:
    cupsd.conf, client.conf, classes.conf, printers.conf, pdftops.conf,
    snmp.conf (bug #487161).
  - Fixed cupsGetNamedDest() behaviour when lpoptions file specifies a
    non-existent default printer (bug #481481, STR #3082).
  - Fixed admin URLs in CUPS web interface (bug #479809, STR #3022).
  - Fixed mailto notifier (bug #474920, STR #3011).
  - Fixed option encoding for "compression" (bug #474814, STR #2997).
  - Marked templates and translated templates as configuration files
    (bug #474769).
  - Fixed a busy-loop in the scheduler that could occur when a
    connection is closed (bug #474323).
  - Use php-cgi instead of php when running PHP scripts (bug #460898).
  - Applied patch from upstream to fix handling of "Satisfy Any" in
    cupsd.conf (bug #481303).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-8
changelog:
  - Applied patch to fix STR #2974 (bug #473905, CVE-2008-5286,
    CVE-2008-1722).
  - Applied patch to fix STR #2774 (bug #473915, CVE-2008-5184).
  - Applied patch to fix RSS subscription limiting (bug #473901,
    CVE-2008-5183).
  - Run the serial backend as root (bug #216658).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-6
changelog:
  - Applied patch to fix CVE-2008-3639 (STR #2918, bug #464722).
  - Applied patch to fix CVE-2008-3640 (STR #2919, bug #464722).
  - Applied patch to fix CVE-2008-3641 (STR #2911, bug #464722).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-2
changelog:
  - Preserve default BrowseAllow value as @LOCAL so as to avoid
    unexpected configuration file changes.


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-1
changelog:
  - Preserve _cupsAdminGetServerSettings and _cupsAdminSetServerSettings
    function declarations in adminutil.h, and ship i18n.h as in 1.2.x.
  - Preserve 'do not use' comment in http_t struct definition.
  - Applied upstream patch to fix https stalls when using Firefox 3
    (bug #453610, STR #2892).
  - Compile pdftops/GlobalParams.cxx with -fno-strict-aliasing (bug #447868).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Require exactly matching libs package (bug #447867).
  - Fixed cancel man page (bug #434967).
  - Fixed permissions of classes.conf in file manifest to match those
    set in cupsd (bug #245748).
  - Fixed log file permissions (bug #218761).
  - Backported cupsGetNamedDest() support for faster look-ups when the
    destination is known, such as in 'lp -d ...' (bug #428086).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Re-based to 1.3.7.  Fixes bug #241406 (STR #2400),
    bug #249570 (STR #2228), bug #250383 (STR #2084, STR #2198),
    bug #409121, bug #430067 (STR #1969, STR #2386), bug #430076
    (STR #1985), bug #430648 (STR #2319), bug #432001,
    bug #433087 (STR #2319), bug #441439 (STR #2699), bug #441811,
    bug #446023 (STR #1261), bug #447548 (STR #2179), bug #451101,
    bug #453396.
  - No longer need initscript, locale, relro, directed-broadcast,
    str2061, str2056, str2055, get_jobs, af_unix-auth, str2264,
    if-modified-since, str2266, str2023, str2117, str2351,
    CVE-2007-0720, CVE-2007-3387, CVE-2007-4351,
    CVE-2007-4352,5492,5393, CVE-2007-4045, docinfo-crash, str2656,
    CVE-2008-0047, CVE-2008-0053, CVE-2008-1373 or CVE-2008-1722
    patches.
  - Build now requires krb5-devel and avahi-compat-libdns_sd-devel.
  - The devel sub-package now requires krb5-devel.
  - Don't run autoconf; only lspp patch required it, and
    autoconf-generated changes have now been folded into that patch.
  - Don't aclocal even when we modify m4 files -- CUPS does not use
    automake (bug #250251).
  - Don't overwrite upstream snmp.conf file.
  - Move _http_s structure into public header file to prevent build
    failures in other packages.  Ship md5.h for this as well.
  - Revert STR #2537 so that non-UTF-8 clients continue to be accepted.
  - Don't strip foomatic recommended strings from make/model names.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.18
changelog:
  - Applied patch to fix CVE-2008-0053 (HP-GL/2 input processing, bug #438117).
  - Applied patch to fix CVE-2008-1373 (GIF overflow, bug #438303).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.17
changelog:
  - Applied patch to prevent heap-based buffer overflow in CUPS helper
    program (bug #436153, CVE-2008-0047, STR #2729).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.16
changelog:
  - Prevent double-free when a browsed class has the same name as a printer
    or vice versa (bug #433767, STR #2656).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.15
changelog:
  - Fixed LSPP patch so that strings allocated with cupsdSetString() are always
    clear correctly (bug #258221).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Applied patch to fix CVE-2007-4045 (bug #356581).
  - Applied patch to fix CVE-2007-4352, CVE-2007-5392 and
    CVE-2007-5393 (bug #356581).
  - Applied patch to fix CVE-2007-4351 (STR #2561, bug #353991).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.9
changelog:
  - Fixed IPv6 address parsing (bug #241400, STR #2117).
  - Fixed a bug that caused cups-lpd not to set the correct value for
    job-originating-host-name (bug #240223, STR #2023).
  - Cleaned up initscript error handling (bug #237953).
  - Fixed cups-lpd -odocument-format=... option (bug #230073, STR #2266).
  - Fixed If-Modified-Since: handling in libcups (bug #218764, STR #2133).
  - Make the initscript use start priority 56 (bug #213828).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.8
changelog:
  - Applied fix for STR #2264 (bug #230118).
  - Added patch for UNIX domain sockets authentication (bug #230613).
  - LSPP: Updated patch for line-wrapped labels (bug #228107).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.7
changelog:
  - Don't reload CUPS after rotating the logs with logrotate, but make sure
    to use the new file in that case (bug #215024).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.6
changelog:
  - LSPP: added check_context() function for get_jobs(), get_job_attrs() and
    validate_user() (bug #229673).
  - Fixed a potential scheduler crash (bug #231522).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.2
changelog:
  - Run the serial backend as root (bug #216658).
  - Fixed LSPP SELinux check (bug #216856).
  - LSPP fix: process URI before logging it (bug #216673).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-11.1
changelog:
  - Reload, don't restart, when logrotating (bug #215024).
  - Fixed pdftops.conf (bug #214612).
  - LSPP patch fix (bug #213501).
  - Added filter and PPD for text-only printer (bug #213034).
  - Fixed parallel backend (bug #213023, STR #2056).
  - Added support for /dev/ttyUSB devices (bug #212580, STR #2061).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-9
changelog:
  - adminutil.c: when writing 'BrowseAllow @LOCAL', add a comment about what
    to change it to when using directed broadcasts from another subnet
    (bug #204373).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-8
changelog:
  - LSPP patch didn't get updated properly in 1:1.2.4-6.  Use the right
    patch this time (bug #208676).  LSPP re-enabled.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.2-10
changelog:
  - Remove 'Provides: LPRng = 3.8.15-3' (bug #148757).
  - Applied patch to fix STR #1893 (bug #201800).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.2-6
changelog:
  - Use replacement snmp.c from STR #1737 (bug #193093).
  - Re-enable LSPP; doesn't harm browsing after all.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.1-2
changelog:
  - 1.2.1.
  - Another STR #1705 fix (bug #192034).
  - Fixed devel package multilib conflict (bug #192664).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.0-7
changelog:
  - Sync to svn5568.  No longer need rpath patch.
  - Added a 'conflicts:' for kdelibs to prevent bug #192548.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.0-4
changelog:
  - Disable back-channel data in the usb backend (STR #1705, bug #192034).
  - Fix for 'browsing stops on reload', STR #1670 (bug #191217).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Sync to svn5538.
  - Added 'restartlog' to initscript, for clearing out error_log.  Useful
    for problem diagnosis.
  - Initscript no longer needs to check for printconf-backend.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Sync to svn5470.
  - No longer need link, CAN-2005-0064, or no-propagate-ipp-port patches.
  - Switch to upstream PIE implementation (every single binary is PIE).
  - Extend relro to all binaries.
  - Better rpath patch.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - No longer need backend, rcp, or ppdsdat patches.
  - Use configure switch for LogFilePerm default instead of patch.


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.5.rc3.2
changelog:
  - Patch pdftops to understand 'includeifexists', and use that in the
    pdftops.conf file (bug #189809).


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.2.rc1.8
changelog:
  - No longer need openssl-devel.
  - Build with LDAP_DEPRECATED=1, to pick up declarations of ldap_init() etc.
  - Only warn about ACLs once (STR #1532).
  - Fix imagetops filter (STR #1533).
  - Sync pstops.c with svn 5382.


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.2.rc1.1
changelog:
  - Ship a printers.conf file, and a client.conf file.  That way, they get
    their SELinux file contexts set correctly.


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.1.b2.6
changelog:
  - Add KDE compatibility symbols _ipp_add_attr/_ipp_free_attr to ipp.h, with
    a comment saying why they shouldn't be used.


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.0.svn5102.0
changelog:
  - New svn snapshot.
  - No longer need enabledisable patch.
  - Fixed double-free in scheduler/policy.c (STR #1428).


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.0.svn4964.0
changelog:
  - Use -fPIE not -fpie in PIE patch.
  - Fix link patch.
  - Patch in PIE instead of using --enable-pie, since that doesn't work.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - 1.2 svn snapshot.
  - No longer need doclink, str1023, pdftops, sanity, lpstat, str1068,
    sigchld, gcc34, gcc4, slow, CAN-2004-0888, CAN-2005-2097, finddest,
    str1249, str1284, str1290, str1301, CVE-2005-3625,6,7 patches.
  - Removed autodetect-tag patch.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.23-18
changelog:
  - Raise IPP_MAX_VALUES to 100 (bug #164232).  STR #1284.
  - Made FindDest better behaved in some instances (bug #164232).  STR #1283.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.22-2
changelog:
  - Fixed cups-lpd file mode (bug #137325).
  - Convert all man pages to UTF-8 (bug #107118).  Patch from Miloslav Trmac.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.22-0.rc2.1
changelog:
  - Make cancel-cups(1) man page point to lp-cups(1) not lp(1) (bug #136973).
  - Use upstream patch for STR #953.
  - 1.1.22rc2.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.22-0.rc1.7
changelog:
  - Prevent filters generating incorrect PS in locales where "," is the
    decimal separator (bug #136102).  Patch from STR #970.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.21-1.rc2.1
changelog:
  - 1.1.21rc2.
  - No longer need state, reload-timeout or str743 patches.
  - httpnBase64 patch no longer applies; alternate method implemented
    upstream.
  - Fix single byte overread in usersys.c (spotted by Colin Walters).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-9
changelog:
  - Apply patches from CVS (authtype) to fix STR #434, STR #611, and as a
    result STR #719.  This fixes several problems including those noted in
    bug #114999.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-8
changelog:
  - If cupsd fails to start, make it exit with an appropriate code so that
    initlog notifies the user (bug #110135).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fix cups/util.c:get_num_sdests() to use encryption when it is necessary
    or requested (bug #118982).
  - Use upstream patch for the HTTP/1.1 Continue bug (from STR716).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-7
changelog:
  - Fix non-conformance with HTTP/1.1, which caused failures when printing
    to a Xerox Phaser 8200 via IPP (bug #122352).
  - Make lppasswd(1) PIE.
  - Rotate logs within cupsd (instead of relying on logrotate) if we start
    to approach the filesystem file size limit (bug #123003).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-4
changelog:
  - Tracked D-BUS API changes.
  - Updated D-BUS configuration file.
  - Symlinks to avoid conflicting with bash builtins (bug #102490).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-2
changelog:
  - Try harder to find a translated page for the web interface (bug #107619).
  - Added build_as_pie conditional to spec file to facilitate debugging.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-1
changelog:
  - 1.1.20.
  - No longer need idefense, str226 patches.
  - Updated sanity patch.
  - The devel sub-package requires openssl-devel (bug #110772).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Don't ignore the file descriptor when ShutdownClient is called: it
    might get closed before we next try to read it (bug #107787).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.19-10
changelog:
  - Pass correct attributes-natural-language through even in the absence
    of translations for that language (bug #100984).
  - Show compilation command lines.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.19-7
changelog:
  - Add some %if %use_dbus / %endif's to make it compile without dbus
    (bug #97397).  Patch from Jos Vos.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.19-0.rc4.1
changelog:
  - 1.1.19rc4.  Ported initscript, idefense, ppdsdat, dbus patches.
  - No longer need error, sigchld patches.
  - Ship cupstestppd.


author: Havoc Pennington <hp@redhat.com> 1:1.1.18-4
changelog:
  - adjust dbus patch - dbus_bus_get() sends the hello for you, 
    and there were a couple of memleaks
  - buildprereq dbus 0.9
  - rebuild for new dbus
  - hope it works, I'm ssh'd in with no way to test. ;-)


author: Tim Waugh <twaugh@redhat.com> 1.1.18-1
changelog:
  - 1.1.18.
  - No longer need uninit patch.
  - Some parts of the iDefense and pdftops patches seem to have been
    picked up, but not others.


author: Tim Waugh <twaugh@redhat.com> 1.1.17-6
changelog:
  - Add epoch to internal requirements.
  - Make 'condrestart' return success exit code when daemon isn't running.


author: Nalin Dahyabhai <nalin@redhat.com> 1.1.15-14
changelog:
  - Buildrequire pam-devel.
  - Patch default PAM config file to remove directory names from module paths,
    allowing the configuration files to work equally well on multilib systems.
  - Patch default PAM config file to use system-auth, require the file at build-
    time because that's what data/Makefile checks for.


author: Tim Waugh <twaugh@redhat.com> 1.1.15-13
changelog:
  - Use logrotate for log rotation (bug #76791).
  - No longer need cups.desktop, since redhat-config-printer handles it.


author: Tim Waugh <twaugh@redhat.com> 1.1.15-11
changelog:
  - Use %configure for multilib correctness.
  - Use libexec instead of lib for CUPS_SERVERBIN.
  - Ship translated man pages.
  - Remove unshipped files.
  - Fix file list permissions (bug #59021, bug #74738).
  - Fix messy initscript output (bug #65857).
  - Add 'reload' to initscript (bug #76114).


author: Tim Waugh <twaugh@redhat.com> 1.1.15-7
changelog:
  - Really add cups-lpd xinetd file (bug #63919).
  - Ship pstoraster (bug #69573).
  - Prevent fread from trying to read from beyond EOF (fixes a segfault
    with new glibc).


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.15-3
changelog:
  - Add a symlink /usr/share/cups/doc -> /usr/share/doc/cups-devel-1.1.15
    because some applications expect to find the cups docs in
    /usr/share/cups/doc


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.15-1
changelog:
  - 1.1.15-1
  - Fix up smb printing trigger (samba-client, not samba-clients)
  - Start cupsd earlier, apparently it needs to be running before samba
    starts up for smb printing to work.


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.14-12
changelog:
  - Support SMB printing (#62407)
  - Add HTML redirections to doc files to work around users mistaking
    /usr/share/doc/cups-1.1.14 for the web frontend (#62405)


author: Bill Nottingham <notting@redhat.com> 1.1.14-7
changelog:
  - lpc man page is alternative too
  - run ldconfig in -libs %post/%postun, not main
  - remove alternatives in %preun


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.13-5
changelog:
  - Move cups-config to cups-devel subpackage
  - Make alternatives usage a %define to simplify builds for earlier
    releases
  - Explicitly provide things we're supplying through alternatives
    to shut up kdeutils dependencies


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.13-1
changelog:
  - 1.1.13
  - Add patch for koi8-{r,u} and iso8859-8 encodings (#59018)
  - Rename init scripts so we can safely "killall cupsd" from there


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 1.1.1 (this has some major bugfixes)
  - Fix a typo in initscript (it's $?, not ?$)
  - Fix /usr/etc vs. /etc trouble, don't insist on /usr/var (YUCK!)
  - Create the spool dir


author: Than Ngo <than@redhat.de>
changelog:
  - update to 1.1 release
  - move back to /etc/rc.d/init.d
  - fix cupsd.init to work with /etc/init.d and /etc/rc.d/init.d
  - split cups


author: Tim Powers <timp@redhat.com>
changelog:
  - started changelog 
  - fixed init.d script location
  - changed script in init.d quite a bit and made more like the rest of our
    startup scripts


author: Tomas Mraz <tmraz@redhat.com> 1.4.1-3.7
changelog:
  - implement safe renegotiation - CVE-2009-3555 (#533125)
  - do not allow MD2 in certificate signatures by default - CVE-2009-2409
    (#510197)


author: Tomas Mraz <tmraz@redhat.com> 1.4.1-3.5
changelog:
  - fix NUL characters in DN and SAN cert fields issue,
    make sure gnutls_x509_crt_check_hostname() fails when certificate
    has no CN or SAN CVE-2009-2730 (#516231)


author: Jeff Johnson <jbj@redhat.com> 1.0.20-1
changelog:
  - update to 1.0.20.
  - add --with-included-opencdk --with-included-libtasn1
  - add --with-included-libcfg --with-included-lzo
  - add --disable-srp-authentication.
  - do "make check" after build.


author: John (J5) Palmieri <johnp@redhat.com> 2.1.6-6
changelog:
  - Fix typo in fdi file to point to the correct script
  - Install the fdi file to the policy directory instead of information


author: John (J5) Palmieri <johnp@redhat.com> 2.1.6-4
changelog:
  - Add gphoto-set-procperm and 90-gphoto-camera-policy.fdi to
    have HAL set permissions on the usb cameras
  - Remove hotplug support since we don't use it anymore (udev takes care
    of devices and HAL takes care of permissions)


author: Nalin Dahyabhai <nalin@redhat.com> 2.0-4
changelog:
  - Set the owner of the device to the console lock holder, not the owner
    of /dev/console, in the hotplug agent, fixing access for users who log
    in at VTs and use startx (#62976).


author: Tim Waugh <twaugh@redhat.com> 2.0-0.rc2.1
changelog:
  - 2.0rc2 (bug #59993).  No longer need docs patch or man page.
  - Really fix up libtool libraries (bug #60002).


author: Tim Waugh <twaugh@redhat.com> 2.0-0.beta5.1
changelog:
  - 2.0beta5.
  - Fix Makefiles so that documentation can be built.
  - Ship pkgconfig file.
  - Add man page.


author: Tim Waugh <twaugh@redhat.com> 2.0-0.beta4.1
changelog:
  - 2.0beta4.
  - Build requires transfig, and at least version 0.1.5 of libusb.
  - Clean up file lists.
  - Build documentation.


author: Ray Strode <rstrode@redhat.com> - 1:2.15.1.1-7
changelog:
  - don't require a display to build invest applet (bug 200970).
    Problem discovered by Nalin Dahyabhai <nalin@redhat.com>


author: Ray Strode <rstrode@redhat.com> - 2.14.0-3
changelog:
  - apply patch

   * Tue Mar 28 2006 Ray Strode <rstrode@redhat.com> - 2.14.0-2
  - export symbols in gswitchit applet so applet plugins 
    work (bug 187168)


author: Ray Strode <rstrode@redhat.com> - 1:2.12.1-3
changelog:
  - build correct command string for cpufreq-selection. Fix
    spotted by Ingo Schaefer <ingo@ingo-shaefer.de> (Bug 164147).


author: Ray Strode <rstrode@redhat.com> 1:2.11.91-2
changelog:
  - disable scrollkeeper database updates
  - add omf files to package list
  - require gnome-utils for gucharmap/charpick integration


author: Mark McLoughlin <markmc@redhat.com> 1:2.10.1-10
changelog:
  - Backport from HEAD patch to remove lame warning dialog when the
    mixer applet can't find a mixer device


author: Ray Strode <rstrode@redhat.com> 1:2.10.0-5
changelog:
  - Don't use %postun -p optimization now that we do more than
    just /sbin/ldconfig in %postun (bug 152236)


author: Mark McLoughlin <markmc@redhat.com> 2.8.0-2
changelog:
  - Remove the wireless applet and add patch to use the netstatus
    applet for backwards compat. bug #131652.


author: Mark McLoughlin <markmc@redhat.com> 2.7.2-2
changelog:
  - Run mc-install-default-macros in %post
  - Fixed small-volume patch from Nathan Fredrickson <nathan@silverorange.com>


author: Mark McLoughlin <markmc@redhat.com> 1:2.6.2.1-1
changelog:
  - Update to 2.6.2.1
  - Re-do the way we decide whether to build the battstat applet.
    Should fix 122379
  - Remove some patches that have gone upstream


author: Havoc Pennington <hp@redhat.com> 1:2.2.0-5
changelog:
  - rebuild with datadir/wireless-applet and datadir/gen_util, 
    someone got overzealous deleting unpackaged files instead 
    of packaging them. #82279


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Keep the CD device closed except when actually accessing it
    (bugzilla.gnome.org 91512)
  - Register CD player so we can start only one CD player
    for display from magicdev. (#39208)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.0.1, and build with new gail
  - 69971 (use correct ppp on/off commands)
  - remove scrollkeeper dtd-compliance patch, 
    fixed upstream apparently (patch doesn't apply anymore)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild with new libs
  - remove temporary hack for too-old libgnomeui
  - add /etc/sound stuff to file list


author: Havoc Pennington <hp@redhat.com>
changelog:
  - no apm on sparc, #60538
  - obsolete battstat_applet for Ximian compat, #51427
  - use ifup/ifdown ppp0 instead of pppon/pppoff for default 
    ppp command in modemlights, #54199


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 1.4.0.5, cross fingers
  - add gconf-devel buildreq, though this is dubious as hell
    (pulled in by gtik using gnome-vfs, but if gtik actually
     accessed gconf it would fail due to gnorba conflict)
  - patch totally busted charpick Makefile.am cflags override


author: Akira TAGOH <tagoh@redhat.com>
changelog:
  - Updated Japanese translation (ja.po, .desktop).
    Note: Please remove Source[23]: when release the next upstream version.


author: Mike A. Harris <mharris@redhat.com> 2.1.1.4-1
changelog:
  - Updated xorg-x11-drv-citron to version 2.1.1.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 2.1.1-0
changelog:
  - Initial spec file for citron input driver generated automatically
    by my xorg-driverspecgen script.


author: Jan Iven,31-2009,74957,
changelog:
  * Thu Jun 08 2006 Jan Iven,31-2009,74957,

  - remove comment for KFKI.HU, broke the template expansion


author: Jan Iven,31-2009,74957,
changelog:
  * Thu Jan 19 2006 Jan Iven
  - 2.0 series: major rewrite/simplification, use template
    still backwards compatible (old code is still around)


author: Juan Antonio Lopez Perez
changelog:
  - Solaris porting
  	   + the krb5.conf file is in a different path in Linux and Solaris
  	   + in Solaris the firewall is not enabled by default so we don't
  	   run Configure_firewall


author: Jan Iven
changelog:
  - * added top-level comment parsing and a comment to indicate that ncm-krb5clt is handling this file


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.38-1
changelog:
  - upgrade to 5.38
  - fix #438556 - upgrade request
  - fix #456471 - SELinux prevents smartd from monitoring 3ware RAID


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.36-4
changelog:
  - fix #232168 - wrong exit status of the init script
  - fix #326551 - smartctl hangs the system when run on PERC controller


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-3.1
changelog:
  - set cloexec on device descriptor so it doesn't leak to sendmail (#214182)
  - fixed minor bug in initscript (#213683)
  - backported SATA disk detection from upstream


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-2
changelog:
  - kudzu is deprecated, replace it with HAL (#195752)
  - moved later in the boot process so haldaemon is already running
    when drives are being detected


author: Tomas Mraz <tmraz@redhat.com> - 1:5.33-5
changelog:
  - add default /etc/sysconfig/smartmontools file
  - ignore errors on startup (#186130)
  - test drive for SMART support before adding it to smartd.conf


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-3
changelog:
  - add libata disks with -d ata if the libata version
    is new enough otherwise do not add them (#145859, #174095)


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-2
changelog:
  - Spec file cleanup by Robert Scheck <redhat@linuxnetz.de> (#170959)
  - manual release numbering
  - remove bogus patch of non-installed file
  - only non-removable drives should be added to smartd.conf
  - smartd.conf should be owned (#171498)


author: John Eckersberg <jeckersb@redhat.com> - 0.1.2-2
changelog:
  - Remove README and LICENSE from docs on -devel package
  - Remove -static package and merge contents into the -devel package


author: Phil Knirsch <pknirsch@redhat.com> - 5:1.3.3.3-1.el5
changelog:
  - Added missing gettext buildrequires
  - Fixed the XSLT httpd.conf file to be compatible with httpd-2.2 and newer


author: Phil Knirsch <pknirsch@redhat.com> 1.3.3-1
changelog:
  - Rewrote XSLT backend to use libxslt-python instead of 4Suite
  - Fixed wrongly claimed "file has been manually modified" for fresh 1st run
    (#167633)
  - Updated pam config file to latest pam recommendation (#170629)


author: Phil Knirsch <pknirsch@redhat.com> 1.3.2-2
changelog:
  - Fixed the KeepAlive bug that was already fixed as errata for RHEL3 (#137815)
  - Fixed use of True and False instead of gtk.TRUE and gtk.FALSE (#153039)
  - Fixed traceback when no X-server is running
  - Fixed problem with ServerSignature setting (#156639)
  - Removed static /manual alias from httpd.conf template (#144239)
  - Updated gtk.mainloop() and gtk.mainquit() to new API names
  - Added pa translation file (#157826)


author: Phil Knirsch <pknirsch@redhat.com> 1.2.1-1
changelog:
  - Fixed problem with Error documents for non English languages (#115220)
  - Removed deprecated SSLLog and SSLLogLevel parameters (#115221)
  - Fixed SSL stuff (#115223)
  - Fixed not well-formed XSLT file (#119849)
  - Obsoletes redhat-config-httpd (#124106)
  - system-config-httpd docdir now is owned by package (#125750)


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed gnome.url_show() call for help pages (#110128).
  - Updated httpd.conf.xsl to latest httpd package (#107539).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Include HIG patch from Jens Knutson and fixed remaining problems with it.
  - Really added Crotatin and a few other languages this time (#106601).


author: Phil Knirsch <pknirsch@redhat.com> 1.1.0-5
changelog:
  - Fixed problem with Allow from and Deny from (double from).
  - Included Croation translation (#106601).
  - Big change in 4Suite requires fix for the Xslt processing.


author: Phil Knirsch <pknirsch@redhat.com> 1.0.1-16
changelog:
  - Fixed absolute symlink for config files.
  - Fixed problem with startup error message without X11.
  - Fixed AllowOverride problem.
  - Fixed Listen parameter handling.
  - Fixed Allow and Deny parameter handling.


author: Phil Knirsch <pknirsch@redhat.com> 1.0.1-10
changelog:
  - Fixed missing Alias entry in XSLT conversion file (#71423).
  - Fixed wrong menu entry (apacheconf instead of redhat-config-httpd) (#71424).


author: Trond Eivind Glomsrød <teg@redhat.com> 0.8.1-1
changelog:
  - don't install desktop files in the kontrol-panel directory, it 
    now reads the standard location as well (#52719)
  - nn and no summaries in .desktop files were switched
  - Fix character set for es.po, pt.po and it.po
  - The COPYING filed listed as a doc-file weren't present in the tree
  - Mark various configuration files as %config


author: Philipp Knirsch <pknirsch@redhat.de> 0.8-7
changelog:
  - Added symlink to redhat-config-apache for tool nameing compatibility.
  - Fixed typo in po/pt_BR.po that prevented doing a make dist.


author: Philipp Knirsch <pknirsch@redhat.de> 0.8-4/3
changelog:
  - Fixed not working directory options removal (#45160)
  - Fixed missing libglade-devel build prereq (#44725)
  - Fixed missing ServerAlias entries in vhosts (#44320)


author: Philipp Knirsch <pknirsch@redhat.com> 0.8-3/2
changelog:
  - Fixed some autofoo issues in Makefile.am, specfile and autogen.sh 
  - Fixed Bugzilla bug #40004 (small typo in src/ApacheControl.py)


author: Philipp Knirsch <pknirsch@redhat.com> 0.8-2/1
changelog:
  - Added the Epoch: tag to avoid update problems with previous versions.
  - Added a nice srpm feature in the Makefile.am with which we can now easily
    make SRPMS directly from CVS (borrowed from the kernel CVS Makefile ;)


author: Jens Petersen <petersen@redhat.com> - 1.4p6-7
changelog:
  - add automake-1.4-subdirs-89656.patch (#89656) [thanks to hjl@gnu.org]
  - License not Copyright
  - update source url
  - don't prerequire install-info
  - remove unwanted files rather than excluding them


author: Jens Petersen <petersen@redhat.com> 1.4p6-2
changelog:
  - conflict with automake < 1.5, to prevent both automake-1.4 and automake14
    from being installed at the same time (#71626)


author: Jens Petersen <petersen@redhat.com> - 1.4p6-1
changelog:
  - 1.4-p6 with versioning from upstream
  - versioning and lisp patches no longer required
  - include the info files in the docs dir
  - remove doc files from the automake-1.4 datadir.


author: Jens Petersen <petersen@redhat.com> - 1.4p5-1
changelog:
  - new package based on automake-1.4p5-3
  - add version suffix to prgram names and data directories
  - no info files, since only 1.5 info files will be installed


author: Petr Machata <pmachata@redhat.com> - 2010e-1.el5
changelog:
  - Upstream 2010d
    - The DST change in Bangladesh takes place a minute earlier
    - Fiji to end DST on 2010-03-28 at 03:00, about a month earlier
    - Samoa to observe DST this year; they didn't observe DST last year
    - DST in Chile extended to 3 April
    - Resolves: #571538
  - Upstream 2010e:
    - Fix a typo in Bangladesh DST rule


author: Petr Machata <pmachata@redhat.com> - 2010c-1.el5
changelog:
  - Upstream 2010a
    - Source code cleanups
  - Upstream 2010b
    - Northern Mexico's border cities share the DST schedule with the
      United States
  - Upstream 2010c
    - Paraguay DST now in effect from 2nd Sunday of April to 1st Sunday
      of October
  - Resolves: #568667


author: Petr Machata <pmachata@redhat.com> - 2009u-1.el5
changelog:
  - Upstream 2009p
    - Argentina does not enter DST on October 18
    - San Luis switched from UTC-4 to UTC-3 on October 11th
  - Upstream 2009q
    - Change DST end in Syria from November 1 to last Friday in October
    - Changes to past Hong Kong transitions
    - Kemerovo oblast' in Russia will change current time zone on March 28, 2010.
      Asia/Novokuznetsk is the new time zone name
  - Upstream 2009r
    - Changes to local times of three Australian research stations in Antarctica
  - Upstream 2009s
    - Fiji plans to re-introduce DST from November 29th 2009 to April 25th 2010
  - Upstream 2009u
    - Bangladesh changed their clock back to Standard Time on December 31, 2009
    - Resolves: #550570
  - Dropped tzdata-2009o-argentinas.patch


author: Petr Machata <pmachata@redhat.com> - 2009o-2.el5
changelog:
  - San Luis (Argentina) entered DST on October 11 (tzdata-2009o-argentinas.patch)
  - Resolves: #529427


author: Petr Machata <pmachata@redhat.com> - 2009o-1.el5
changelog:
  - Upstream 2009o
    - Bangladesh won't go back to Standard Time from October 1, 2009
    - Pakistan leaves DST on October 1, 2009
  - Dropped tzdata-2009m-karachi.patch
  - Argentina does not enter DST on October 18 (tzdata-2009o-argentinas.patch)
  - Resolves: #529427


author: Petr Machata <pmachata@redhat.com> - 2009m-1.el5
changelog:
  - Upstream 2009m
    - Palestine will will revert back to winter time on Friday, 2009-09-04
    - Samoa passed the DST Bill that fixes DST dates for 2009 and 2010
  - Drop Egypt patch
  - Add markers for autoupdate of spec file
  - Pakistan leaves the period of DST on October 1
  - Resolves: #524198


author: Petr Machata <pmachata@redhat.com> - 2009k-1.el5
changelog:
  - Upstream 2009j
    - DST switch for Bangladesh will occur an hour earlier than was
      thought (we can drop Bangladesh patch).
  - Upstream 2009k
    - Mauritius will not continue to observe DST the coming summer
    - Arbitrarily end DST at the end of 2009 so that a POSIX-style time
      zone string can appear in the Dhaka binary file
  - Egypt starts winter time on August 21.
  - Resolves: #517009


author: Petr Machata <pmachata@redhat.com> - 2009i-2.el5
changelog:
  - Official announcement is for the Bangladesh change to occur at 23:00
    of local time, not 24:00.  Add upstream patch implementing the same.
  - Resolves: #503832


author: Petr Machata <pmachata@redhat.com> - 2009i-1.el5
changelog:
  - Upstream 2009i
    - Bangladesh introduces DST 2009-06-20
  - Upstream 2009h
    - Convert use of 00:00 stamps to 24:00 of the previous day
    - Clarify that the data is Public Domain
  - Drop Cairo patch
  - Resolves: #503832


author: Petr Machata <pmachata@redhat.com> - 2009f-1.el5
changelog:
  - Upstream 2009a
    - Fix Asia/Kathmandu spelling
    - Historical timestamps for Switzerland and Cuba
    - DST update for America/Resolute
  - Upstream 2009d
    - Morocco will observe DST from 2009-06-01 00:00 to 2009-08-21 00:00
    - Tunisia will not observe DST this year.
    - Syria will start DST on 2009-03-27 00:00 this year
    - Cuba will start DST on midnight between 2009-03-07 and 2009-03-08
    - Province of San Luis, Argentina, went to UTC-04:00 on 2009-03-15
  - Upstream 2009e
    - Historical changes for Jordan
    - Palestine will start DST on 2009-03-26 and end 2009-09-27
  - Upstream 2009f
    - Pakistan will observe DST between 2009-04-15 and (probably) 2009-11-01
  - Resolves: #495470
  - Egypt ends DST on 2009-09-24
  - Resolves: #492263


author: Petr Machata <pmachata@redhat.com> - 2008i-1.el5
changelog:
  - Upstream 2008g
    - Fixed future DST transitions for Brazil
  - Upstream 2008h
    - Fix exact DST transition hour for Mauritius
    - Syria will leave the period of DST on Nov 1
    - Fix coordinates of Pacific/Niue
  - Upstream 2008i
    - Updates for Argentina: Drop DST in zones America/Argentina/Jujuy,
      La_Rioja, San_Juan, Catamarca, Mendoza, Rio_Gallegos, Ushuaia; new
      zone America/Argentina/Salta (for provinces SA, LP, NQ, RN).
  - Resolves: #467188


author: Petr Machata <pmachata@redhat.com> - 2008f-1
changelog:
  - Upstream 2008f
    - Gaza strip runs on different clocks during Ramadan
    - Argentina and Brazil will start DST on Sunday October 19, 2008
  - Drop Pakistan & Morocco patches
  - Resolves: #462707


author: Petr Machata <pmachata@redhat.com> - 2008e-1
changelog:
  - Upstream 2008c
    - Mongolia changes zone
    - Pakistan DST is scheduled until Sep/1, instead of Aug/31
  - Upstream 2008d
    - Changes for Brazil and Mauritius
  - Upstream 2008e
    - Changes for Mauritius
    - Leap second coverage for 31/Dec 2008
    - Corrections of historical dates
  - Drop Morocco and Pakistan patches that are superseded by upstream
  - Pakistan DST is scheduled until Oct/31
  - Morocco DST is scheduled until Aug/31
  - Resolves: #460059 #460365 #452679


author: Petr Machata <pmachata@redhat.com> - 2008b-2
changelog:
  - Upstream 2008b
    - DST changes for Syria, Cuba; Iraq abandons DST
    - Saigon zone renamed Ho_Chi_Minh; backward link provided
    - Add America/Argentina/San_Luis information
  - Pakistan introduces DST
  - Resolves: #447270


author: Petr Machata <pmachata@redhat.com> - 2007j-1
changelog:
  - Upstream 2007j
    - New links America/St_Barthelemy and America/Marigot
    - Venezuela is changing their clocks on December 9 at 03:00
  - Upstream 2007i
    - Syria DST will take place at Midnight between Thursday and Friday.
    - Cuba will end DST on the last Sunday of October.
  - Update tst-timezone.c from glibc CVS
  - Resolves: #410101


author: Petr Machata <pmachata@redhat.com> - 2007h-1
changelog:
  - Upstream 2007h
    - Brazil will observe DST from 2007-10-14 to 2008-02-17
    - Egypt and Gaza switched earlier than we expected
    - Iran will resume DST next year
    - Venezuela is scheduled to change TZ to -4:30 on January 1
  - Resolves: #296801
  - Resolves: #266861


author: Petr Machata <pmachata@redhat.com> - 2007g-1
changelog:
  - Upstream 2007g
    - Egypt switches the September 7, not September 28
    - Daviess, Dubous, Knox, Martin, and Pike Counties, Indiana, switch
      from central to eastern time in November
    - South Australia, Tasmania, Victoria, and New South Wales are
      changing their DST rules effective next year
    - Several Antarctic station's rules weren't properly updated to account
      for this year's change to the New Zealand daylight saving rules
  - Venezuela timezone changes from -4:00 to -4:30 at 24 September
  - Resolves: #296801
  - Resolves: #266861


author: Petr Machata <pmachata@redhat.com> - 2007f-1
changelog:
  - Upstream 2007f
    - New Zealand is extending DST, starting later this year.
    - Haiti no longer observes DST.
    - The Turks and Caicos switch at 02:00, not at 00:00, and have
      adopted US DST rules.
  - Upstream 2007e
    - Syria switched to summer time at Mar/29.
    - Honduras will not enter DST this year.
  - Resolves: #240786


author: Petr Machata <pmachata@redhat.com> - 2007d-1
changelog:
  - Upstream 2007d
    - Mongolia has abolished DST.
    - Turkey will use EU rules this year, changing at 01:00 UTC rather
      than 01:00 standard time.
    - Cuba observed DST starting Sunday.
    - Resolute, Nunavut switched from Central to Eastern time last
      November.


author: Petr Machata <pmachata@redhat.com> - 2007c-1
changelog:
  - Upstream 2007c
    - Pulaski County, Indiana, switched back to eastern time.
    - Turkey switches at 01:00 standard time, not at 01:00 UTC.
  - Upstream 2007b
    - Changes to the commentary in "leapseconds".
  - Resolves: #230089


author: Petr Machata <pmachata@redhat.com> - 2007a-1
changelog:
  - Upstream 2007a:
    - Cuba has ended its three years of permanent DST.
    - Western Australia DST trial changes
    - Updates to Bahamas, they will be in sync with 2007 US DST change
  - Resolves: #228732


author: Petr Machata <pmachata@redhat.com> - 2006m-2
changelog:
  - Proposed upstream patch (#210058)
    - Jordan will switch to winter time on October 27, not September 29
    - Brazil's DST this year is the first Sunday in November to the last
      Sunday in February.  (Thanks to Frederico A. C. Neves.)
    - ISO 3166 codes for Serbia and Montenegro, zone Europe/Podgorica
    - Commentary and past timestamps changes


author: Petr Machata <pmachata@redhat.com> - 2006m-1
changelog:
  - Upstream 2006m:
    - Adjustments for Egypt, Palestine, Uruguay
    - Better description of `until' field in zic (8) manpage


author: Petr Machata <pmachata@redhat.com> - 2006l-1
changelog:
  - Upstream 2006k, 2006l:
    - Adjustments for Egypt, Palestine, Cuba, Honduras
    - Documentation changes


author: Petr Machata <pmachata@redhat.com> - 2006j-1
changelog:
  - Upstream 2006j
    - Honduras stopped observing DST on Monday at 00:00
    - America/Bermuda will follow the US's lead next year
    - America/Moncton will use US-style rules next year
    - New Zone America/Blanc-Sablon, for Canadians who observe AST all
      year
    - New zone: America/Atikokan instead of America/Coral_Harbour
    - New zones: Europe/Jersey, Europe/Guernsey, Europe/Isle_of_Man
    - Historical changes
    - Commentary updates
  - Upstream 2006i
    - localtime.c fixes
  - Upstream 2006h
    - zic leapsecond fix


author: Petr Machata <pmachata@redhat.com> - 2006f-1
changelog:
  - Upstream 2006f
    - America/Guatemala observes DST between Apr/30 and Oct/1
    - Historical changes for Nicaragua
    - Update of America/Indiana/Vincennes in zone table


author: Petr Machata <pmachata@redhat.com> - 2006d-1
changelog:
  - Upstream 2006d
    - Haiti observes DST
    - Sri Lanka change actually took effect Apr/15
    - All Canada is now scheduled for 2007 US DST rules
    - Some historical fixes


author: Petr Machata <pmachata@redhat.com> - 2006c-1
changelog:
  - Upstream 2006c
    - Time-related changes:
      - dozens of historical and commentary changes
      - Iran stopped observing DST
      - Sri Lanka switches from UTC+6 to UTC+5:30
      - America/Thule and America/Edmonton will adopt new US rules,
        starting 2007
      - Tunisia is adopting regular DST
    - Code:
      - asctime.c: Chages in format strings to silent gcc warnings
      - removing K&R notation from function signatures
      - few fixes across the code


author: Petr Machata <pmachata@redhat.com> 2006b-1
changelog:
  - Upstream 2006b:
    - using tz64code version, as 32 is legacy according to tzdata ML
    - new manual pages for ctime, strftime, tzset
    - some source code reorganizations
    - no timezone/dst rule updates


author: Petr Machata <pmachata@redhat.com> 2006a-1
changelog:
  - Upstream 2006a:
    - private.h(scheck): changing char* to char const*
    - Rule changes for Palestine, zone changes for Indiana/US, both
      changes for Canada.
    - Many related doc changes.
  - Naming scheme in spec file doesn't use %{name}, but tzdata.


author: Petr Machata <pmachata@redhat.com> 2005r-3
changelog:
  - 2005r-3
    - Meta changes.  Renaming tzdata.tar.bz2 file to tzdata$ver-base,
      so that it won't clash across updates.


author: Petr Machata <pmachata@redhat.com> 2005r-2
changelog:
  - 2005r
    - Zones EST, MST, HST, EST5EDT, CST6CDT, MST7MDT, PST8PDT moved to
      northamerica to guard against old files with obsolete information
      being left in the time zone binary directory.
    - Changes for countries that are supposed to join 2007 US DST
      change.  This includes most of Canada, however entries already in
      the database (Alberta, British Columbia, Newfoundland, Northwest
      Territories, and Yukon) were left alone for the time being.
    - Fixes in zdump.c (abbrok): conditions are chained, and the string
      is checked for emptiness.


author: Jakub Jelinek <jakub@redhat.com> 2005q-2
changelog:
  - 2005q
    - changes for Georgia, Azerbaijan, Jordan, Palestine, Cuba, Nicaragua
    - SystemV timezone changes


author: Jakub Jelinek <jakub@redhat.com> 2005n-2
changelog:
  - 2005n
    - changes for Kyrgyzstan and Uruguay
  - fix a typo in the Makefile (used TZDATA env var instead of TZDIR during
    make check), update tst-timezone.c from glibc CVS (#172102)


author: Jakub Jelinek <jakub@redhat.com> 2005m-2
changelog:
  - 2005m
    - changes for USA (extending DST by 4 weeks since 2007), Tunisia,
      Australia, Kazakhstan
    - historical timezone data changes for Japan, Poland, Northern Ireland and
      Mali
    - timezone name change for East Timor


author: Jakub Jelinek <jakub@redhat.com> 2005g-2
changelog:
  - 2005g
    - fixes for Uruguay
  - include README and Theory from tzcode tarball in /usr/share/doc;
    Theory includes a good summary of how the timezone data files
    are supposed to be named


author: Ngo Than <than@redhat.de>
changelog:
  - rebuild for 7.0
  - put man page in /usr/share/man/*
  - use 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=i686-redhat-linux-gnu --host=i686-redhat-linux-gnu \
  	--target=i386-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info
  - fix makefile.in
  - cleanup specfile


author: Zack Cerza <zcerza@redhat.com> - 0.6.0-1
changelog:
  - New upstream release.
  - Add Requires for xorg-x11-xinit.
  - Add Requires for gnome-python2-gconf.
  - Bump pyspi Requires.


author: Zack Cerza <zcerza@redhat.com> - 0.5.2-1
changelog:
  - New upstream release.
  - Update Requires from Xvfb to xorg-x11-server-Xvfb.
  - Bump pyspi Requires.
  - Remove ImageMagick Requires.
  - Escape post-macro in changelog-macro.


author: Zack Cerza <zcerza@redhat.com> - 0.5.1-1
changelog:
  - Remove BuildRequires on at-spi-devel. Added one on python.
  - Use macros instead of absolute paths.
  - Touch _datadir/icons/hicolor/ before running gtk-update-icon-cache.
  - Require and use desktop-file-utils.
  - postun = post.
  - Shorten BuildArchitectures to BuildArch. The former worked, but even vim's 
    hilighting hated it.
  - Put each *Requires on a separate line.
  - Remove __os_install_post definition.
  - Use Fedora Extras BuildRoot.
  - Instead of _libdir, which kills the build if it's /usr/lib64, use a
    python macro to define python_sitelib and use that.
  - Remove the executable bit on the examples in install scriptlet.
  - Remove call to /bin/rm in post scriptlet.
  - Use dist in Release.


author: Zack Cerza <zcerza@redhat.com> - 0.5.0-2
changelog:
  - It looks like xorg-x11-Xvfb changed names. Require 'Xvfb' instead.
  - Remove Requires on python-elementtree, since RHEL4 didn't have it. The 
    functionality it provides is probably never used anyway, and will most likely
    be removed in the future.
  - Don't run gtk-update-icon-cache if it doesn't exist.


author: Zack Cerza <zcerza@redhat.com> - 0.5.0-1
changelog:
  - New upstream release.
  - Added missing BuildRequires on at-spi-devel.
  - Added Requires on pyspi >= 0.5.3.
  - Added Requires on rpm-python, pygtk2, ImageMagick, xorg-x11-Xvfb, 
    python-elementtree.
  - Moved documentation (including examples) to the correct place.
  - Make sure /usr/share/doc/dogtail is removed.
  - Added 'gtk-update-icon-cache' to %post.


author: Paul A. Rombouts <p.a.rombouts@home.nl>
changelog:
  - Added patch to deal with minor compilation issue on 64-bit
    architectures.
  - In case the dist macro is undefined, .SL is used.


author: Martin Bacovsky <mbacovsk@redhat.com> - 20020927-40
changelog:
  - tracepath doesn't continue past destination host (#174032) 
    previous patch replaced by new one provided by <mildew@gmail.com>
    option -c added


author: Phil Knirsch <pknirsch@redhat.com> 20020927-4
changelog:
  - Fixed DNS lookup problems (#68212).
  - Added warning if binding problem failed on subinterface (#81640).


author: Phil Knirsch <pknirsch@redhat.com> 20020927-3
changelog:
  - Removed bonding tarball and replaced it with ifenslave.c and README
  - FHS compliance for all tools, now to be found in /bin with compat symlinks to
    old places.


author: Phil Knirsch <pknirsch@redhat.com> 20020124-7
changelog:
  - Added new BuildPreReqs for docbook-utils and perl-SGMLSpm (#66661)
  - Fixed ipv6 error printing problem (#66659).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Added a patch to activate the rdisc server (#64270).
  - Display the countermeasures warning only in verbose (#55236)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed a bunch of compiler warnings (#37131)
  - Fixed wrong exit code for no packets and deadline (#40323)
  - Moved arping to /sbin from /usr/sbin due to ifup call (#45785). Symlink from
    /usr/sbin/ provided for backwards compatibility.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - include README.ifenslave doco.
  - "ping -i N" was broke for N >= 3 (#9929).
  - update to ss000121:
  -- clockdiff: preserve raw socket errno.
  -- ping: change error exit code to 1 (used to be 92,93, ...)
  -- ping,ping6: if -w specified, transmit until -c limit is reached.
  -- ping,ping6: exit code non-zero if some packets not received within deadline.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - add remaining binaries.
  - casts to remove compilation warnings.
  - terminate if -w deadline is reached exactly (#8724).


author: Stepan Kasal <skasal@redhat.com> - 3.7.2-4
changelog:
  - use rpm macros more consistently
  - add manual page for brltty.conf
  - add more documentation
  - install the default brltty-pm.conf to docdir only
  - Resolves: #530554
  - silence the postinstall scriptlet
  - Resolves: #529163


author: Stepan Kasal <skasal@redhat.com> - 3.7.2-3
changelog:
  - escape rpm macros in the rpm change log
  - remove bogus rpath from libbrlttybba.so (CVE-2008-3279, #457942)
  - add dependencies to bind the subpackages from one build together


author: Stepan Kasal <skasal@redhat.com> - 3.7.2-2
changelog:
  - fix building with newer kernel-headers (#456247)
  - do not strip debug info during install (#500545)
  - Resolves: rhbz #456247 #500545


author: Adrian Havill <havill@redhat.com> 3.2-2
changelog:
  - changed spec "Copyright" to "License"
  - use %configure macro, %{_libdir} for non-ia32 archs
  - removed unnecessary set and unset, assumed/default spec headers
  - fixed unpackaged man page, duplicate /bin and /lib entries
  - use plain install vs scripts for non-i386 buildsys


author: Joe Orton <jorton@redhat.com> 5.0-0.rc4.3
changelog:
  - support mutual authentication (Nalin Dahyabhai)
  - once authentication returns COMPLETE, cache name for the duration
    of the connection


author: Ralph Apel <r.apel at r-apel.de> 1.0.3-1jpp
changelog:
  - upgrade to 1.0.3
  - just eliminate __GENERATED__ tests because no sources for old xdoclet 
  - add xjavadoc javadoc subpackage


author: Jaroslaw Polok <jaroslaw.polok@cern.ch> 1.0.11-4.cern
changelog:
  - renamed iscsi-scst-utils package to iscsi-scst-target-utils for more
    consistency with other iscsi packages (scsi-target-utils)


author: Colin Walters <walters@redhat.com> - 1.0alpha4-1
changelog:
  - New upstream version 1.0alpha4 
  - Remove upstreamed patch libtheora-1.0alpha3-include.patch 
  - Use Theora_I_spec.pdf for spec
  - Add in .pc file (yay! another library sees the light)


author: Ray Strode <rstrode@redhat.com> - 1:2.15.1-2
changelog:
  - Apply spec file patch from 
    Hooman Mesgary <hooman@farsiweb.info> to conditionallly
    compile out some of the games (bug 192001)


author: Havoc Pennington <hp@redhat.com> 1:2.2.1-1
changelog:
  - 2.2.1
  - remove "applyschemas" patch fixed upstream
  - remove "stonescrash" patch also fixed upstream


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.0.0
  - remove noreplace from the .soundlist files
  - add missing schemas
  - get rid of gnometris again
  - use desktop-file-install


author: Havoc Pennington <hp@redhat.com>
changelog:
  - GNOME 2 version
  - spec file cleanups
  - no devel package
  - don't run auto*, just use the "rm from buildroot" approach to lose xbill


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - run ldconfig in post and postun (#16589)
  - don't put the post and postun scripts in the middle of the files list --
    that tends to break things (oops)


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - 1.2.0
  - remove gnometris, xbill from subdirs since we don't install
    them and they cause problems with new C compiler
  - update autoconf stuff
  - remove gturing, add gnotski to the file list


author: Mike Christie <mchristie@redhat.com> - 0.0-6.20091205snap
changelog:
  - Rebase to latest upstream snapshot from Dec 5th 2009 (git id
  97832d8dcd00202a493290b5d134b581ce20885c)
  - 511002 fix segfault when running tgtadm --mode connection --op delete
  - 513241 fix tgtd crash under load
  - 531041 fix tgt segfault on 31st target creation


author: Mike Christie <mchristie@redhat.com> - 0.0-5.20080917snap
changelog:
  - Rebase to latest upstream snapshot to include tgt-admin and static config.
  - When doing a "tgtd stop" kill running targets if run level indicates
  system is shutting down or restarting.


author: Ray Strode <rstrode@redhat.com> - 2.16.0-15
changelog:
  Resolves: #250220
  - Workaround e-d-s issue to retain account changes
  - Make dialog smaller to fit on small displays
  - Make alt-c actually commit changes, too


author: Matthias Clasen <mclasen@redhat.com> - 2.16.0-13
changelog:
  - Fix a possible crash when dbus is not available (#216698)
  - Fix a possible crash with DND of themes (#216699)


author: Christopher Aillon <caillon@redhat.com> - 2.16.0-9
changelog:
  - Don't let default-applications tell official gecko applications
    to launch new tabs or windows, as it causes them to not launch when 
    there is no running instance.


author: Soren Sandmann <sandmann@redhat.com> - 2.16.0-8
changelog:
  - Update the compiz-support.patch to support raising of windows (and also
    show-desktop) (Bug 204129).


author: Soren Sandmann <sandmann@redhat.com> - 2.16.0-7
changelog:
  - Update the compiz-support.patch to use the correct gconf keys for
    the compiz keyboard bindings. (Bug 204094).


author: Ray Strode <rstrode@redhat.com> - 2.15.91-5.fc6
changelog:
  - When creating new thumbnails, record thumbnail location rather
    that regenerating them over and over again.


author: Matthias Clasen <mclasen@redhat.com> - 1:2.12.1-4
changelog:
  - Reenable about me capplet
  - Add a preview to the user image chooser
  - Make about me capplet use userpasswd for passwords and userinfo for
    gecos information


author: Ray Strode <rstrode@redhat.com> - 1:2.11.91-3
changelog:
  - Configure all mice for left-handed mode in left-handed 
    mode (bug 126420)
  - dont use pango-xft when drawing keyboard layout in 
    gnome-keyboard-properties dialog


author: Matthias Clasen <mclasen@redhat.com> - 2.9.4-3
changelog:
  - Add a Conflicts against older desktop-backgrounds, since
    the location of the xml background descriptions has changed


author: Ray Strode <rstrode@redhat.com> - 1:2.8.0-4
changelog:
  - Delete control center desktop file
  - Remove superfluous args to second desktop-file-install command


author: Warren Togami <wtogami@redhat.com> 1:2.6.1-3
changelog:
  - workaround "evolution-1.6" bug, always point at /usr/bin/evolution
  - Preferred Applications should be visible from KDE


author: Alexander Larsson <alexl@redhat.com> 1:2.2.1-1
changelog:
  - Update to 2.2.1
  - Add XRandR backport
  - Remove patches already in, update cursorsupport patch to apply


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.1.2
  - comment out the "fakingsucks" patch for esd
  - remove most of the other patches
  - remove patch to add WM/terminal font to font capplet, should be upstream
  - comment out xftprefs patch for now


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Switch the gtk1 theme along with the gtk2 theme
  - Add the ability to switch the window manager theme through the theme capplet
  - Add two more font options to the font property dialog
  - Add a bunch of missing unrefs of the result of gconf_client_get_default()


author: Havoc Pennington <hp@redhat.com>
changelog:
  - munge the desktop files correctly
  - obsolete control-center-devel, #69168
  - replace gnomecc.desktop with a file from redhat-menus


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild for new libraries
  - remove a no-longer-existing schemas file from post
  - use desktop-file-install


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild with new gnome-libs so that libcapplet has right cflags/libs
  - pixbufflags patch to make the rebuild work
  - compileflags patch to make control-center-single work


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Fix problem when ~/.gtkrc does not already exist.
  - Fix problem with solid backgrounds in bg-properties capplet


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Sort of fix problem with people hitting OK while the 
    "Save Session" dialog is still up. (Session won't be saved, 
    but at least the selected entry will be correctly kept.)
  - Fix history list in background properties capplet
  - Fix problems with temporary files in theme-selector capplet


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Add big change to use gdk-pixbuf for backgrounds and add
    the ability to emboss the background with a logo


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - fixed sound-properties to only disable sound when run with --init-settings-..
  - removed debugging output from several capplets, fixed try behaviour of sm and
    gnome-edit capplets
  - fixed bug in screensaver and background props
  - added new icons


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - prime file selector path for browse in background-props if 
    "/usr/share/pixmaps/backgrounds/" exists.
  - fix behavior of file selector when you delete/cancel/ok it


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - added patch to fix trying in theme selector 
  - disabled crystal screensaver, it does evil things to preview in capplet


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - fix sound-properties capplet so Try/Revert doesnt come on unless user
    changes something
  - fixed theme-selector to not leave processes behind on Linux 2.2 kernels
  - strip binaries


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - update to 0.99.3
  - seems like patch for non-standard xscreensaver placement was already in
    prestine sources(?)


author: Jonathan Blandford <jrb@redhat.com>
changelog:
  - updated to 0.99.1
  - temporary hack patch to get path to work to non-standard placement
    of xscreensaver binaries in RH 5.2


author: Dave Anderson <anderson@redhat.com> - 4.1.2-8.el5
changelog:
  - Fix for potential segmentation violation in glibc malloc/free when 
    running "kmem -s" on a large, active, live system.
    Resolves: rhbz#659593


author: Dave Anderson <anderson@redhat.com> - 4.1.2-7.el5
changelog:
  - Fix for the x86 "bt" command for potential backtrace error of a
    NMI-interrupted idle task.
    Resolves: rhbz#653288
  - Fix for the x86 "bt" command to fix Xen hypervisor backtrace errors 
    generated when a NMI-interrupted VCPU is running within the hypercall
    entry point, and when a NMI-interrupted VCPU is running within an
    interrupt handler entry point.
    Resolves: rhbz#653823


author: Dave Anderson <anderson@redhat.com> - 4.1.2-6.el5
changelog:
  - Support for "__rhel5" marker device in KVM dumpfile header.
    Resolves: rhbz#603027
  - Fix for the x86 "bt" command to generically recognize the end of trace
    condition for user-space tasks without having to hardwire any more 
    kernel entry point function names.
    Resolves: rhbz#608714
  - Fix for the x86_64 "bt" command if the kdump-generated NMI interrupts
    a multi-threaded task that has just entered kernel space but has not
    changed the RSP stack pointer register from its user-space per-thread
    stack location to the kernel stack.
    Resolves: rhbz#608171


author: Dave Anderson <anderson@redhat.com> - 4.1.2-5.el5
changelog:
  - Fix for backtrace of x86 NMI-interrupted task with a user exception frame
    from a syscall exception that had not called the requested system call 
    function.
    Fix for backtrace when a newly-forked x86 task's resumption EIP address 
    value is set to the "ret_from_fork" entry point by copy_thread().
    Resolves: rhbz#572605
  - Fix for segmentation violation with the "mach -m" command option on x86 
    or x86_64 systems whose BIOS-provided e820 map contains EFI-related memory
    type value that has not been mapped to an E820 type.
    Resolves: rhbz#569164
  - Fix for the "kmem -s list" command option to prevent it from attempting
    to gather a slab cache name string from the "cache_chain" list_head.
    Resolves: rhbz#580589
  - Change the ppc64 cpu count displayed by the initial system banner
    and by the "sys" and "mach" commands to be the number of cpus online.
    Resolves: rhbz#580599
  - Fix for backtrace of an x86_64 NMI-interrupted task which had not 
    swapped its RSP from the user-space stack to the kernel stack.
    Resolves: rhbz#593066


author: Dave Anderson <anderson@redhat.com> - 4.1.2-4.el5
changelog:
  - Fix for very large xendump core files whose ELF sections are located
    beyond a file offset of 4GB.
  - Resolves: rhbz#561767


author: Dave Anderson <anderson@redhat.com> - 4.1.2-3.el5
changelog:
  - Fix for the "bt" command on an ia64 "INIT" process that interrupted
    a task that was running in user space, but was unable to modify the
    original (interrupted) task's stack.  Without the patch, the "INIT"
    task's backtrace would not display the task that was interrupted,
    and would display the error message "bt: unwind: failed to locate
    return link (ip=<user-virtual-address>)!".  With the patch, the
    interrupted task information is displayed in the same manner as if
    the original stack had been modified.
  - Resolves: rhbz#553353


author: Dave Anderson <anderson@redhat.com> - 4.1.2-2.el5
changelog:
  - Fix for a 4.0-8.11 regression that introduced a bug in determining
    the number of cpus in ppc64 kernels when the cpu_possible_[map/mask]
    has more cpus than the cpu_online_[map/mask].  In that case, the
    kernel contains per-cpu runqueue data and "swapper" tasks for the
    extra cpus.  Without the patch, on systems with a possible cpu count
    that is larger than its online cpu count:
     (1) the "sys" command will reflect the possible cpu count.
     (2) the "ps" command will show the existent-but-unused "swapper"
         tasks as active on the extra cpus.
     (3) the "set" command will allow the current context to be set to
         any of the existent-but-unused "swapper" tasks.
     (4) the "runq" command will display existent-but-unused runqueue
         data for the extra cpus.
     (5) the "bt" command on the existent-but-unused "swapper" tasks will
         indicate: "bt: cannot determine NT_PRSTATUS ELF note for active
         task: <task>" on dumpfiles, and "(active)" on live systems
  - Resolves: rhbz#550419


