# packages

pkgId: b08377c4b8303ca3a445987296d5f288fcdf9ed03539f3f0cc8b4559afeccc91
name: scsi-target-utils
arch: src
version: 1.0.14
epoch: 0
release: 2.el6
summary: The SCSI target daemon and utility programs
url: http://stgt.sourceforge.net/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-008.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/scsi-target-utils-1.0.14-2.el6.src.rpm
checksum_type: sha256
description:
  The SCSI target package contains the daemon and tools to setup a SCSI targets.
  Currently, software iSCSI targets are supported.


pkgId: 3727aa201661157ff1bda678ef1d566d4fdefeac26e363386ad1fba15f813a63
name: sdparm
arch: src
version: 1.04
epoch: 0
release: 1.1.el6
summary: List or change SCSI/SATA disk parameters
url: http://sg.danny.cz/sg/sdparm.html
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc2-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sdparm-1.04-1.1.el6.src.rpm
checksum_type: sha256
description:
  SCSI disk parameters are held in mode pages. This utility lists or
  changes those parameters. Other SCSI devices (or devices that use the
  SCSI command set e.g. some SATA devices) such as CD/DVD and tape
  drives may also find parts of sdparm useful. Requires the linux kernel
  2.4 series or later. In the 2.6 series any device node the understands
  a SCSI command set may be used (e.g. /dev/sda). In the 2.4 series SCSI
  device node may be used.

  Fetches Vital Product Data pages. Can send commands to start or stop
  the media and load or unload removable media.

  Warning: It is possible (but unlikely) to change SCSI disk settings
  such that the disk stops operating or is slowed down. Use with care.


pkgId: d21169c2183dd61a84e363162712fc05f8ecf030507fcc5c0ed89834aa520b62
name: seabios
arch: src
version: 0.5.1
epoch: 0
release: 3.el6
summary: Open-source legacy BIOS implementation
url: http://www.coreboot.org/SeaBIOS
rpm_license: LGPLv3
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Emulators
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/seabios-0.5.1-3.el6.src.rpm
checksum_type: sha256
description:
  SeaBIOS is an open-source legacy BIOS implementation which can be used as
  a coreboot payload. It implements the standard BIOS calling interfaces
  that a typical x86 proprietary BIOS implements.


pkgId: b1fc759d53028015ad35b9c7bfb61bde535f74e6f066ed6cceb41d190b418f2b
name: seahorse
arch: src
version: 2.28.1
epoch: 0
release: 4.el6
summary: A GNOME application for managing encryption keys
url: http://projects.gnome.org/seahorse/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/seahorse-2.28.1-4.el6.src.rpm
checksum_type: sha256
description:
  Seahorse is a graphical interface for managing and using encryption keys.
  It also integrates with nautilus, gedit and other places for encryption
  operations.


pkgId: 4c624a3b223048542864411b516a545d8eab04c92efed2e61cbde68916b3d0f3
name: seahorse-plugins
arch: src
version: 2.28.1
epoch: 0
release: 2.el6
summary: Plugins and utilities for encryption in GNOME
url: http://projects.gnome.org/seahorse/
rpm_license: GPLv2+ and GFDL
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: js20-bc1-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/seahorse-plugins-2.28.1-2.el6.src.rpm
checksum_type: sha256
description:
  The plugins and utilities in this package integrate seahorse into
  the GNOME desktop environment and allow users to perform operations
  from applications like nautilus or gedit.


pkgId: f70e5112f591fb37f550f8e2acef927409238132daf6a686e59cb71ec50e63ad
name: sed
arch: src
version: 4.2.1
epoch: 0
release: 10.el6
summary: A GNU stream text editor
url: http://sed.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Text
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sed-4.2.1-10.el6.src.rpm
checksum_type: sha256
description:
  The sed (Stream EDitor) editor is a stream or batch (non-interactive)
  editor.  Sed takes text as input, performs an operation or set of
  operations on the text and outputs the modified text.  The operations
  that sed performs (substitutions, deletions, insertions, etc.) can be
  specified in a script file or from the command line.


pkgId: a68f93e760fd08a8ee459027d3dcac77f3d08cadac37d626e9f26eddfa41711f
name: seekwatcher
arch: src
version: 0.12
epoch: 0
release: 4.1.el6
summary: Utility for visualizing block layer IO patterns and performance
url: http://oss.oracle.com/~mason/seekwatcher/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: Development/System
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/seekwatcher-0.12-4.1.el6.src.rpm
checksum_type: sha256
description:
  Seekwatcher generates graphs from blktrace runs to help visualize IO patterns
  and performance. It can plot multiple blktrace runs together, making it easy
  to compare the differences between different benchmark runs.

  You should install the seekwatcher package if you need to visualize detailed
  information about IO patterns.


pkgId: 5b4b049d8fcfa4a3ac73c576fdd980667c6f90c2b3a09d26630f67e04f960846
name: sendmail
arch: src
version: 8.14.4
epoch: 0
release: 8.el6
summary: A widely used Mail Transport Agent (MTA)
url: http://www.sendmail.org/
rpm_license: Sendmail
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-012.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sendmail-8.14.4-8.el6.src.rpm
checksum_type: sha256
description:
  The Sendmail program is a very widely used Mail Transport Agent (MTA).
  MTAs send mail from one machine to another. Sendmail is not a client
  program, which you use to read your email. Sendmail is a
  behind-the-scenes program which actually moves your email over
  networks or the Internet to where you want it to go.

  If you ever need to reconfigure Sendmail, you will also need to have
  the sendmail-cf package installed. If you need documentation on
  Sendmail, you can install the sendmail-doc package.


pkgId: 50d6364ccd2d2a8b30aa12640c25e1d3243f3c7bc2bcf11d65e60c0ca89c3e18
name: setools
arch: src
version: 3.3.7
epoch: 0
release: 4.el6
summary: Policy analysis tools for SELinux
url: http://oss.tresys.com/projects/setools
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/setools-3.3.7-4.el6.src.rpm
checksum_type: sha256
description:
  SETools is a collection of graphical tools, command-line tools, and
  libraries designed to facilitate SELinux policy analysis.

  This meta-package depends upon the main packages necessary to run
  SETools.


pkgId: a054d85b9ff2f627c9742f43d1e524d1a9af8ed1959ee5ca12bf60f373fedb99
name: setroubleshoot
arch: src
version: 2.2.94
epoch: 0
release: 1.el6
summary: Helps troubleshoot SELinux problems
url: https://fedorahosted.org/setroubleshoot
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/setroubleshoot-2.2.94-1.el6.src.rpm
checksum_type: sha256
description:
  setroubleshoot gui. Application that allows you to view setroubleshoot-server
  messages.
  Provides tools to help diagnose SELinux problems. When AVC messages
  are generated an alert can be generated that will give information
  about the problem and help track its resolution. Alerts can be configured
  to user preference. The same tools can be run on existing log files.


pkgId: 9b44c39482df254cfcb8a68df0e905248ad46fd00584ea30990ca8a8ac8b5621
name: setroubleshoot
arch: src
version: 3.0.38
epoch: 0
release: 2.1.el6
summary: Helps troubleshoot SELinux problems
url: https://fedorahosted.org/setroubleshoot
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/setroubleshoot-3.0.38-2.1.el6.src.rpm
checksum_type: sha256
description:
  setroubleshoot GUI. Application that allows you to view setroubleshoot-server
  messages.
  Provides tools to help diagnose SELinux problems. When AVC messages
  are generated an alert can be generated that will give information
  about the problem and help track its resolution. Alerts can be configured
  to user preference. The same tools can be run on existing log files.


pkgId: be98b1b033c82e4cf2df7865454aa9d57a3809d563c2f6b1c5334a6b6236cb12
name: setroubleshoot-plugins
arch: src
version: 2.1.60
epoch: 0
release: 1.el6
summary: Analysis plugins for use with setroubleshoot
url: https://fedorahosted.org/setroubleshoot
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: s390-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/setroubleshoot-plugins-2.1.60-1.el6.src.rpm
checksum_type: sha256
description:
  This package provides a set of analysis plugins for use with
  setroubleshoot. Each plugin has the capacity to analyze SELinux AVC
  data and system data to provide user friendly reports describing how
  to interpret SELinux AVC denials.


pkgId: 3ebf497b70a71a3e8be047e791bc765dab7343e94a5c3b1f4ee6c00435b3294d
name: setserial
arch: src
version: 2.17
epoch: 0
release: 25.el6
summary: A utility for configuring serial ports
url: http://setserial.sourceforge.net/
rpm_license: GPL+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/setserial-2.17-25.el6.src.rpm
checksum_type: sha256
description:
  Setserial is a basic system utility for displaying or setting serial
  port information. Setserial can reveal and allow you to alter the I/O
  port and IRQ that a particular serial device is using, and more.


pkgId: 7dcccf96e0b7ee9d24995fde920c8492011beed6f4333dab62640dbaf40178e8
name: setup
arch: src
version: 2.8.14
epoch: 0
release: 10.el6
summary: A set of system configuration and setup files
url: https://fedorahosted.org/setup/
rpm_license: Public Domain
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: x86-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/setup-2.8.14-10.el6.src.rpm
checksum_type: sha256
description:
  The setup package contains a set of important system configuration and
  setup files, such as passwd, group, and profile.


pkgId: 09e8f5c08c48febdbadc11ca277cd73ed140f66a6ee98f3c6a9d3594ad336782
name: setuptool
arch: src
version: 1.19.9
epoch: 0
release: 3.el6
summary: A text mode system configuration tool
url: http://git.fedorahosted.org/git/?p=setuptool.git
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/setuptool-1.19.9-3.el6.src.rpm
checksum_type: sha256
description:
  Setuptool is a user-friendly text mode menu utility which allows you
  to access all of the text mode configuration programs included in the
  operating system distribution.


pkgId: b8fb1b0ceb47db4266d111491bd7ed126eeac0c0b5a703f5e802eb65888feaca
name: sg3_utils
arch: src
version: 1.28
epoch: 0
release: 10.el6_7
summary: Utilities for devices that use SCSI command sets
url: http://sg.danny.cz/sg/sg3_utils.html
rpm_license: GPLv2+ and BSD
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: sl6-kojislave01.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/sg3_utils-1.28-10.el6_7.src.rpm
checksum_type: sha256
description:
  Collection of Linux utilities for devices that use the SCSI command set.
  Includes utilities to copy data based on "dd" syntax and semantics (called
  sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check
  mode and log pages (sginfo, sg_modes and sg_logs); spin up and down
  disks (sg_start); do self tests (sg_senddiag); and various other functions.
  See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4
  series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0)
  must be used. In the 2.6 series other device names may be used as
  well (e.g. /dev/sda).

  Warning: Some of these tools access the internals of your system
  and the incorrect usage of them may render your system inoperable.


pkgId: a4bc3db42586b011b02721425f1e4b4243762a58d311589b19d1cf6d0d7c536f
name: sgabios
arch: src
version: 0
epoch: 0
release: 0.3.20110621svn.el6
summary: Serial Graphics Adapter BIOS
url: http://code.google.com/p/sgabios/
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Emulators
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sgabios-0-0.3.20110621svn.el6.src.rpm
checksum_type: sha256
description:
  SGABIOS is designed to be inserted into a BIOS as an option rom to provide
  over a serial port the display and input capabilities normally handled by
  a VGA adapter and a keyboard, and additionally provide hooks for logging
  displayed characters for later collection after an operating system boots.


pkgId: 1d392767375fd7f22a84b3aef1bf41a58a35596ac0924edfc47d094faaf31037
name: sgml-common
arch: src
version: 0.6.3
epoch: 0
release: 32.el6
summary: Common SGML catalog and DTD files
url: http://www.w3.org/2003/entities/
rpm_license: GPL+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Text
rpm_buildhost: s390-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sgml-common-0.6.3-32.el6.src.rpm
checksum_type: sha256
description:
  The sgml-common package contains a collection of entities and DTDs
  that are useful for processing SGML, but that don't need to be
  included in multiple packages.  Sgml-common also includes an
  up-to-date Open Catalog file.


pkgId: 395d9283ccbb7efa45a40f80d8cf0556371181b3bfb60ad7e313b9aa8f78282b
name: shadow-utils
arch: src
version: 4.1.4.2
epoch: 2
release: 13.el6
summary: Utilities for managing accounts and shadow password files
url: http://pkg-shadow.alioth.debian.org/
rpm_license: BSD and GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/shadow-utils-4.1.4.2-13.el6.src.rpm
checksum_type: sha256
description:
  The shadow-utils package includes the necessary programs for
  converting UNIX password files to the shadow password format, plus
  programs for managing user and group accounts. The pwconv command
  converts passwords to the shadow password format. The pwunconv command
  unconverts shadow passwords and generates a passwd file (a standard
  UNIX password file). The pwck command checks the integrity of password
  and shadow files. The lastlog command prints out the last login times
  for all users. The useradd, userdel, and usermod commands are used for
  managing user accounts. The groupadd, groupdel, and groupmod commands
  are used for managing group accounts.


pkgId: cc92fe51773ad8216cc1c3aeb429f1a1167cd30c9d2ff1256a4f04911c83c2b2
name: shadow-utils
arch: src
version: 4.1.4.2
epoch: 2
release: 8.el6
summary: Utilities for managing accounts and shadow password files
url: http://pkg-shadow.alioth.debian.org/
rpm_license: BSD and GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/shadow-utils-4.1.4.2-8.el6.src.rpm
checksum_type: sha256
description:
  The shadow-utils package includes the necessary programs for
  converting UNIX password files to the shadow password format, plus
  programs for managing user and group accounts. The pwconv command
  converts passwords to the shadow password format. The pwunconv command
  unconverts shadow passwords and generates an npasswd file (a standard
  UNIX password file). The pwck command checks the integrity of password
  and shadow files. The lastlog command prints out the last login times
  for all users. The useradd, userdel, and usermod commands are used for
  managing user accounts. The groupadd, groupdel, and groupmod commands
  are used for managing group accounts.


pkgId: 82a8ebfa07e6101b4ca35918ffdeed9486e29d08652927c3102f2cd2560af79c
name: shared-mime-info
arch: src
version: 0.70
epoch: 0
release: 4.el6
summary: Shared MIME information database
url: http://freedesktop.org/Software/shared-mime-info
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-010.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/shared-mime-info-0.70-4.el6.src.rpm
checksum_type: sha256
description:
  This is the freedesktop.org shared MIME info database.

  Many programs and desktops use the MIME system to represent the types of
  files. Frequently, it is necessary to work out the correct MIME type for
  a file. This is generally done by examining the file's name or contents,
  and looking up the correct MIME type in a database.


pkgId: ca7a16560c65dac1eab4a9709b29a1b76cba1f823e81beeafe94627c8428c5ba
name: sharutils
arch: src
version: 4.7
epoch: 0
release: 6.1.el6
summary: The GNU shar utilities for packaging and unpackaging shell archives
url: http://www.gnu.org/software/sharutils/
rpm_license: GPLv3+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Archiving
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sharutils-4.7-6.1.el6.src.rpm
checksum_type: sha256
description:
  The sharutils package contains the GNU shar utilities, a set of tools
  for encoding and decoding packages of files (in binary or text format)
  in a special plain text format called shell archives (shar).  This
  format can be sent through e-mail (which can be problematic for regular
  binary files).  The shar utility supports a wide range of capabilities
  (compressing, uuencoding, splitting long files for multi-part
  mailings, providing checksums), which make it very flexible at
  creating shar files.  After the files have been sent, the unshar tool
  scans mail messages looking for shar files.  Unshar automatically
  strips off mail headers and introductory text and then unpacks the
  shar files.


pkgId: 2a1c5ea85886606186452573d9b579631e0bfbcdeb4bb1d9fc2e91f1b123b86b
name: sil-padauk-fonts
arch: src
version: 2.6.1
epoch: 0
release: 1.el6
summary: A font for Burmese and the Myanmar script
url: http://scripts.sil.org/Padauk
rpm_license: OFL
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: js20-bc1-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sil-padauk-fonts-2.6.1-1.el6.src.rpm
checksum_type: sha256
description:
  Padauk is a Myanmar font covering all currently used characters
  in the Myanmar block. The font aims to cover all minority language needs.
  At the moment, these do not extend to stylistic variation needs.
  The font is a smart font using a Graphite description.


pkgId: c35e954bc99cc2e2ec59c1a3c5648e9fcaaabeff46c593f763b2498285f8b071
name: sinjdoc
arch: src
version: 0.5
epoch: 0
release: 9.1.el6
summary: Documentation generator for Java source code
url: http://cscott.net/Projects/GJ/sinjdoc-latest/
rpm_license: GPL+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sinjdoc-0.5-9.1.el6.src.rpm
checksum_type: sha256
description:
  This package contains Sinjdoc a tool for generating Javadoc-style
  documentation from Java source code


pkgId: 1e2e0ca1b81bb00954460a19c4623e7ea5b18389398c2ac522ba73c66bea2c1f
name: sip
arch: src
version: 4.9.3
epoch: 0
release: 1.el6
summary: SIP - Python/C++ Bindings Generator
url: http://www.riverbankcomputing.com/software/sip/intro
rpm_license: GPLv2 or GPLv3
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sip-4.9.3-1.el6.src.rpm
checksum_type: sha256
description:
  SIP is a tool for generating bindings for C++ classes so that they can be
  accessed as normal Python classes. SIP takes many of its ideas from SWIG but,
  because it is specifically designed for C++ and Python, is able to generate
  tighter bindings. SIP is so called because it is a small SWIG.

  SIP was originally designed to generate Python bindings for KDE and so has
  explicit support for the signal slot mechanism used by the Qt/KDE class
  libraries. However, SIP can be used to generate Python bindings for any C++
  class library.


pkgId: 60c5c09df0f04ec6dca0960b4d97ef69c1cab85b18db8d866c26e86eed1e15e8
name: sl-indexhtml
arch: src
version: 6
epoch: 0
release: 1.sl6
summary: Browser default start page for Scientific Linux
rpm_license: Distributable
rpm_group: Documentation
rpm_buildhost: compose.fnal.gov
location_href: sl6/sl-indexhtml-6-1.sl6.src.rpm
checksum_type: sha256
description:
  The indexhtml package contains the welcome page shown by your Web browser,
  which you'll see after you've successfully installed Scientific Linux.


pkgId: 76035b06f6b8ff28f445ba34b3defbfd3b2d57b2231887d99e9549c3d4978c3e
name: slang
arch: src
version: 2.2.1
epoch: 0
release: 1.el6
summary: The shared library for the S-Lang extension language
url: http://www.jedsoft.org/slang/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/slang-2.2.1-1.el6.src.rpm
checksum_type: sha256
description:
  S-Lang is an interpreted language and a programming library.  The
  S-Lang language was designed so that it can be easily embedded into
  a program to provide the program with a powerful extension language.
  The S-Lang library, provided in this package, provides the S-Lang
  extension language.  S-Lang's syntax resembles C, which makes it easy
  to recode S-Lang procedures in C if you need to.


pkgId: c639ed997c08c9db97be851fd6a4e70490215ad01e54b4e44a4438733d561661
name: slapi-nis
arch: src
version: 0.23
epoch: 0
release: 1.el6
summary: NIS Server and Schema Compatibility plugins for Directory Server
url: http://slapi-nis.fedorahosted.org/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-008.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/slapi-nis-0.23-1.el6.src.rpm
checksum_type: sha256
description:
  This package provides two plugins for Red Hat and 389 Directory Server.

  The NIS Server plugin allows the directory server to act as a NIS server
  for clients, dynamically generating and updating NIS maps according to
  its configuration and the contents of the DIT, and serving the results to
  clients using the NIS protocol as if it were an ordinary NIS server.

  The Schema Compatibility plugin allows the directory server to provide an
  alternate view of entries stored in part of the DIT, optionally adding,
  dropping, or renaming attribute values, and optionally retrieving values
  for attributes from multiple entries in the tree.


pkgId: 558dc3d37be794b2e59cd564c5de75eca099205bdc2dae0b289aeb19d7ddc0f8
name: slf4j
arch: src
version: 1.5.8
epoch: 0
release: 7.el6
summary: Simple Logging Facade for Java
url: http://www.slf4j.org/
rpm_license: MIT and ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-5.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/slf4j-1.5.8-7.el6.src.rpm
checksum_type: sha256
description:
  The Simple Logging Facade for Java or (SLF4J) is intended to serve
  as a simple facade for various logging APIs allowing to the end-user
  to plug in the desired implementation at deployment time. SLF4J also
  allows for a gradual migration path away from
  Jakarta Commons Logging (JCL).

  Logging API implementations can either choose to implement the
  SLF4J interfaces directly, e.g. NLOG4J or SimpleLogger. Alternatively,
  it is possible (and rather easy) to write SLF4J adapters for the given
  API implementation, e.g. Log4jLoggerAdapter or JDK14LoggerAdapter..


pkgId: 2ddbae414f4f697275f18acd966a6b6f635b31e411f5a4f3e1ceb5493330c925
name: smartmontools
arch: src
version: 5.39.1
epoch: 1
release: 2.el6
summary: Tools for monitoring SMART capable hard disks
url: http://smartmontools.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/smartmontools-5.39.1-2.el6.src.rpm
checksum_type: sha256
description:
  The smartmontools package contains two utility programs (smartctl
  and smartd) to control and monitor storage systems using the Self-
  Monitoring, Analysis and Reporting Technology System (SMART) built
  into most modern ATA and SCSI hard disks. In many cases, these
  utilities will provide advanced warning of disk degradation and
  failure.


pkgId: ad2b076c359415af467ea8ea1994c89ced2b846d4480fbbde9b164fb1e77de5d
name: smp_utils
arch: src
version: 0.94
epoch: 0
release: 4.el6
summary: Utilities for SAS management protocol (SMP)
url: http://sg.danny.cz/sg/smp_utils.html
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/smp_utils-0.94-4.el6.src.rpm
checksum_type: sha256
description:
  This is a package of utilities. Each utility sends a Serial Attached
  SCSI (SAS) Management Protocol (SMP) request to a SMP target.
  If the request fails then the error is decoded. If the request succeeds
  then the response is either decoded, printed out in hexadecimal or
  output in binary. This package supports multiple interfaces since
  SMP passthroughs are not mature. This package supports the linux
  2.4 and 2.6 series and should be easy to port to other operating
  systems.

  Warning: Some of these tools access the internals of your system
  and the incorrect usage of them may render your system inoperable.


pkgId: e6b67e0e5e86a5b944745f822fc1b675aba8e56a3e2714840fee3a19a160467f
name: snappy
arch: src
version: 1.1.0
epoch: 0
release: 1.el6
summary: Fast compression and decompression library
url: http://code.google.com/p/snappy/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/snappy-1.1.0-1.el6.src.rpm
checksum_type: sha256
description:
  Snappy is a compression/decompression library. It does not aim for maximum
  compression, or compatibility with any other compression library; instead, it
  aims for very high speeds and reasonable compression. For instance, compared to
  the fastest mode of zlib, Snappy is an order of magnitude faster for most
  inputs, but the resulting compressed files are anywhere from 20% to 100%
  bigger.


pkgId: 008b89d46666da6b31d5579aa46f88f426c5857cfa84707fb5c7a0fb6bd374c5
name: sos
arch: src
version: 2.2
epoch: 0
release: 17.el6
summary: A set of tools to gather troubleshooting information from a system
url: http://fedorahosted.org/sos
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: s390-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sos-2.2-17.el6.src.rpm
checksum_type: sha256
description:
  Sos is a set of tools that gathers information about system
  hardware and configuration. The information can then be used for
  diagnostic purposes and debugging. Sos is commonly used to help
  support technicians and developers.


pkgId: 8657eaff7ecae10b85e7910caf867e1fe49a11d964ffce5a6c0ec3372e5b768b
name: sound-theme-freedesktop
arch: src
version: 0.7
epoch: 0
release: 3.el6
summary: freedesktop.org sound theme
url: http://www.freedesktop.org/wiki/Specifications/sound-theme-spec
rpm_license: GPLv2+ and LGPLv2+ and CC-BY-SA and CC-BY
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: js20-bc1-9.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sound-theme-freedesktop-0.7-3.el6.src.rpm
checksum_type: sha256
description:
  The default freedesktop.org sound theme following the XDG theming
  specification.  (http://0pointer.de/public/sound-theme-spec.html).


pkgId: 549184b7ff6267886e579797dbc0a45dc8894ed5dca018936ea123eba5018ee1
name: sox
arch: src
version: 14.2.0
epoch: 0
release: 6.el6
summary: A general purpose sound file conversion tool
url: http://sox.sourceforge.net/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: ppc-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sox-14.2.0-6.el6.src.rpm
checksum_type: sha256
description:
  SoX (Sound eXchange) is a sound file format converter SoX can convert
  between many different digitized sound formats and perform simple
  sound manipulation functions, including sound effects.


pkgId: 2d23b2a777a797ddcde1bf6759b503896d5c08c7453bc553680cdb68c106e387
name: spamassassin
arch: src
version: 3.3.1
epoch: 0
release: 2.el6
summary: Spam filter for email which can be invoked from mail delivery agents
url: http://spamassassin.apache.org/
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/spamassassin-3.3.1-2.el6.src.rpm
checksum_type: sha256
description:
  SpamAssassin provides you with a way to reduce if not completely eliminate
  Unsolicited Commercial Email (SPAM) from your incoming email.  It can
  be invoked by a MDA such as sendmail or postfix, or can be called from
  a procmail script, .forward file, etc.  It uses a genetic-algorithm
  evolved scoring system to identify messages which look spammy, then
  adds headers to the message so they can be filtered by the user's mail
  reading software.  This distribution includes the spamd/spamc components
  which create a server that considerably speeds processing of mail.

  To enable spamassassin, if you are receiving mail locally, simply add
  this line to your ~/.procmailrc:
  INCLUDERC=/etc/mail/spamassassin/spamassassin-default.rc

  To filter spam for all users, add that line to /etc/procmailrc
  (creating if necessary).


pkgId: 1e76ad6b83f39c80224a49345075d7363412baa50b4dbf878bcebd30a9e8d023
name: speex
arch: src
version: 1.2
epoch: 0
release: 0.12.rc1.1.el6
summary: A voice compression format (codec)
url: http://www.speex.org/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/speex-1.2-0.12.rc1.1.el6.src.rpm
checksum_type: sha256
description:
  Speex is a patent-free compression format designed especially for
  speech. It is specialized for voice communications at low bit-rates in
  the 2-45 kbps range. Possible applications include Voice over IP
  (VoIP), Internet audio streaming, audio books, and archiving of speech
  data (e.g. voice mail).


pkgId: 0bf1d0a183ff5169731d5e1052d8560a0954edb398ee8aecd67fb25324b8db8d
name: spice-client
arch: src
version: 0.4.2
epoch: 0
release: 18.el6
summary: Implements the client side of the SPICE protocol
url: http://www.spice-space.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: x86-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/spice-client-0.4.2-18.el6.src.rpm
checksum_type: sha256
description:
  The Simple Protocol for Independent Computing Environments (SPICE) is
  a remote display system built for virtual environments which allows
  you to view a computing 'desktop' environment not only on the machine
  where it is running, but from anywhere on the Internet and from a wide
  variety of machine architectures.

  This package provides the client side of the SPICE protocol


pkgId: 8b178774998ebf19b58985387da467809725d9635caaa72c760cc594f5031d01
name: spice-common
arch: src
version: 0.4.2
epoch: 0
release: 7.el6
summary: Spice common sources used to build spice-server and spice-client
url: http://www.spice-space.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/spice-common-0.4.2-7.el6.src.rpm
checksum_type: sha256
description:
  The Simple Protocol for Independent Computing Environments (SPICE) is
  a remote display system built for virtual environments which allows
  you to view a computing 'desktop' environment not only on the machine
  where it is running, but from anywhere on the Internet and from a wide
  variety of machine architectures.

  This package should only be used for building other spice packages.
  Not intended to be installed on user machines.


pkgId: 12b65aa4f0ba029be651a80a6192c1463476607f6bf67f5180c8b23232644132
name: spice-server
arch: src
version: 0.10.1
epoch: 0
release: 10.el6
summary: Implements the server side of the SPICE protocol
url: http://www.spice-space.org/
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: x86-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/spice-server-0.10.1-10.el6.src.rpm
checksum_type: sha256
description:
  The Simple Protocol for Independent Computing Environments (SPICE) is
  a remote display system built for virtual environments which allows
  you to view a computing 'desktop' environment not only on the machine
  where it is running, but from anywhere on the Internet and from a wide
  variety of machine architectures.

  This package contains the runtime libraries for any application that wishes
  to be a SPICE server.


pkgId: 830df4e2373d3c73d36a1e6b82070d325d282425f590c9514c705618aba08a10
name: spice-vdagent
arch: src
version: 0.12.0
epoch: 0
release: 4.el6
summary: Agent for Spice guests
url: http://spice-space.org/
rpm_license: GPLv3+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: x86-023.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/spice-vdagent-0.12.0-4.el6.src.rpm
checksum_type: sha256
description:
  Spice agent for Linux guests offering the following features:

  Features:
  * Client mouse mode (no need to grab mouse by client, no mouse lag)
    this is handled by the daemon by feeding mouse events into the kernel
    via uinput. This will only work if the active X-session is running a
    spice-vdagent process so that its resolution can be determined.
  * Automatic adjustment of the X-session resolution to the client resolution
  * Support of copy and paste (text and images) between the active X-session
    and the client


pkgId: ec0e9bcd49f8c9b13b0c1c465b9fb5a94223931c77669116af1e3652d11e5035
name: sqlite
arch: src
version: 3.6.20
epoch: 0
release: 1.el6
summary: Library that implements an embeddable SQL database engine
url: http://www.sqlite.org/
rpm_license: Public Domain
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Databases
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sqlite-3.6.20-1.el6.src.rpm
checksum_type: sha256
description:
  SQLite is a C library that implements an SQL database engine. A large
  subset of SQL92 is supported. A complete database is stored in a
  single disk file. The API is designed for convenience and ease of use.
  Applications that link against SQLite can enjoy the power and
  flexibility of an SQL database without the administrative hassles of
  supporting a separate database server.  Version 2 and version 3 binaries
  are named to permit each to be installed on a single host


pkgId: 7abe8121249e634c93b4b4a4a6c7a2c87870300e5ee408aaba133b94fafcafe9
name: squashfs-tools
arch: src
version: 4.0
epoch: 0
release: 3.el6
summary: Utility for the creation of squashfs filesystems
url: http://squashfs.sf.net
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: js20-bc1-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/squashfs-tools-4.0-3.el6.src.rpm
checksum_type: sha256
description:
  Squashfs is a highly compressed read-only filesystem for Linux.  This package
  contains the utilities for manipulating squashfs filesystems.


pkgId: ccd3d65cbc47c56fde480ded799648329a97be57aa1b9b2272de4158dd636f99
name: squid
arch: src
version: 3.1.10
epoch: 7
release: 1.el6
summary: The Squid proxy caching server
url: http://www.squid-cache.org
rpm_license: GPLv2 and (LGPLv2+ and Public Domain)
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/squid-3.1.10-1.el6.src.rpm
checksum_type: sha256
description:
  Squid is a high-performance proxy caching server for Web clients,
  supporting FTP, gopher, and HTTP data objects. Unlike traditional
  caching software, Squid handles all requests in a single,
  non-blocking, I/O-driven process. Squid keeps meta data and especially
  hot objects cached in RAM, caches DNS lookups, supports non-blocking
  DNS lookups, and implements negative caching of failed requests.

  Squid consists of a main server program squid, a Domain Name System
  lookup program (dnsserver), a program for retrieving FTP data
  (ftpget), and some management and client tools.


pkgId: 3139a1ad0128696912ccc684fe570b18894e97f96d7a8069f7ea4a6266e04afc
name: srptools
arch: src
version: 0.0.4
epoch: 0
release: 10.el6
summary: Tools for using the InfiniBand SRP protocol devices
url: http://www.openfabrics.org/
rpm_license: GPLv2 or BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/srptools-0.0.4-10.el6.src.rpm
checksum_type: sha256
description:
  In conjunction with the kernel ib_srp driver, srptools allows you to
  discover and use SCSI devices via the SCSI RDMA Protocol over InfiniBand.


pkgId: a7ed0537556484d9cc5e4ba5c361bde4ec5d5dceb469339e0aa54c5f04da4188
name: sssd
arch: src
version: 1.11.6
epoch: 0
release: 30.el6
summary: System Security Services Daemon
url: http://fedorahosted.org/sssd/
rpm_license: GPLv3+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sssd-1.11.6-30.el6.src.rpm
checksum_type: sha256
description:
  Provides a set of daemons to manage access to remote directories and
  authentication mechanisms. It provides an NSS and PAM interface toward
  the system and a pluggable backend system to connect to multiple different
  account sources. It is also the basis to provide client auditing and policy
  services for projects like FreeIPA.

  The sssd subpackage is a meta-package that contains the deamon as well as all
  the existing back ends.


pkgId: 91c8d1092468aadd565260ee7bfbd196aadbf5868c8221c4977c1810c11ed7a6
name: sssd
arch: src
version: 1.2.1
epoch: 0
release: 28.el6
summary: System Security Services Daemon
url: http://fedorahosted.org/sssd/
rpm_license: GPLv3+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sssd-1.2.1-28.el6.src.rpm
checksum_type: sha256
description:
  Provides a set of daemons to manage access to remote directories and
  authentication mechanisms. It provides an NSS and PAM interface toward
  the system and a pluggable backend system to connect to multiple different
  account sources. It is also the basis to provide client auditing and policy
  services for projects like FreeIPA.


pkgId: a0cf78e436d7a282272d0dea335985e3499e95b3acaf0395973f2a6a44534a01
name: star
arch: src
version: 1.5
epoch: 0
release: 11.1.el6_5
summary: An archiving tool with ACL support
url: http://cdrecord.berlios.de/old/private/star.html
rpm_license: CDDL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Archiving
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/star-1.5-11.1.el6_5.src.rpm
checksum_type: sha256
description:
  Star saves many files together into a single tape or disk archive,
  and can restore individual files from the archive. Star supports ACL.


pkgId: 95f13a754e538ea101acddf0d2d4ae085e90562388faa090c7d9ef1e5dc2f237
name: startup-notification
arch: src
version: 0.10
epoch: 0
release: 2.1.el6
summary: Library for tracking application startup
url: http://www.freedesktop.org/software/startup-notification/
rpm_license: LGPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/startup-notification-0.10-2.1.el6.src.rpm
checksum_type: sha256
description:
  This package contains libstartup-notification which implements a
  startup notification protocol. Using this protocol a desktop
  environment can track the launch of an application and provide
  feedback such as a busy cursor, among other features.


pkgId: 3dc98856e5a5684db607b7d68701b33ce73516fe2088f5cde2a2c0b3fafece35
name: stix-fonts
arch: src
version: 0.9
epoch: 0
release: 13.1.el6
summary: STIX scientific and engineering fonts
url: http://www.stixfonts.org/
rpm_license: STIX
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: spark.z900.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/stix-fonts-0.9-13.1.el6.src.rpm
checksum_type: sha256
description:
  The mission of the Scientific and Technical Information Exchange (STIX) font
  creation project is the preparation of a comprehensive set of fonts that serve
  the scientific and engineering community in the process from manuscript
  creation through final publication, both in electronic and print formats.

  This package includes base Unicode fonts containing most glyphs for standard
  use.


pkgId: 7e3e41fd2f3dd1d1032c8c8a2a22ffee113fdd66badc730e27202d1245656843
name: strace
arch: src
version: 4.5.19
epoch: 0
release: 1.10.el6
summary: Tracks and displays system calls associated with a running process
url: http://sourceforge.net/projects/strace/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Debuggers
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/strace-4.5.19-1.10.el6.src.rpm
checksum_type: sha256
description:
  The strace program intercepts and records the system calls called and
  received by a running process.  Strace can print a record of each
  system call, its arguments and its return value.  Strace is useful for
  diagnosing problems and debugging, as well as for instructional
  purposes.

  Install strace if you need a tool to track the system calls made and
  received by a process.


pkgId: 9ddf1315384727d453990ed212c3cdf82c245c9a3fc402b9026ce9e7ceb6602d
name: strigi
arch: src
version: 0.7.0
epoch: 0
release: 2.el6
summary: A desktop search program
url: http://www.vandenoever.info/software/strigi/
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Productivity
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/strigi-0.7.0-2.el6.src.rpm
checksum_type: sha256
description:
  Strigi is a fast and light desktop search engine. It can handle a large range
  of file formats such as emails, office documents, media files, and file
  archives. It can index files that are embedded in other files. This means email
  attachments and files in zip files are searchable as if they were normal files
  on your harddisk.

  Strigi is normally run as a background daemon that can be accessed by many
  other programs at once. In addition to the daemon, Strigi comes with powerful
  replacements for the popular unix commands 'find' and 'grep'. These are called
  'deepfind' and 'deepgrep' and can search inside files just like the strigi
  daemon can.


pkgId: c0b1e86fae0d108164510800e533e335429c3a31604672fe81ea0e76a6107226
name: stunnel
arch: src
version: 4.29
epoch: 0
release: 2.el6
summary: An SSL-encrypting socket wrapper
url: http://stunnel.mirt.net/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/stunnel-4.29-2.el6.src.rpm
checksum_type: sha256
description:
  Stunnel is a socket wrapper which can provide SSL (Secure Sockets
  Layer) support to ordinary applications. For example, it can be used
  in conjunction with imapd to create an SSL secure IMAP server.


pkgId: 7f0cb309758292f12297eb0dca6e40067acfbc19c835a6a5d51aebd3cecb6c17
name: subscription-manager
arch: src
version: 0.95.11
epoch: 0
release: 1.el6
summary: Tools and libraries for subscription and repository management
url: https://engineering.redhat.com/trac/subscription-manager
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/subscription-manager-0.95.11-1.el6.src.rpm
checksum_type: sha256
description:
  The Subscription Manager package provides programs and libraries to allow users
  to manage subscriptions and yum repositories from the Red Hat entitlement
  platform.


pkgId: 45de6fc6bda9c98463ffc5ff3ad494acbf1ca8ef07b358f273885f381c977f9b
name: subversion
arch: src
version: 1.6.11
epoch: 0
release: 10.el6_5
summary: A Modern Concurrent Version Control System
url: http://subversion.apache.org/
rpm_license: ASL 1.1
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: ppc-017.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/subversion-1.6.11-10.el6_5.src.rpm
checksum_type: sha256
description:
  Subversion is a concurrent version control system which enables one
  or more users to collaborate in developing and maintaining a
  hierarchy of files and directories while keeping a history of all
  changes.  Subversion only stores the differences between versions,
  instead of every complete file.  Subversion is intended to be a
  compelling replacement for CVS.


pkgId: 7ae1e6c31f09805dc45f32f607dc51dfe104f979e8d07c613bd986cdbc507354
name: sudo
arch: src
version: 1.7.2p2
epoch: 0
release: 9.el6
summary: Allows restricted root access for specified users
url: http://www.courtesan.com/sudo/
rpm_license: ISC
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-012.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sudo-1.7.2p2-9.el6.src.rpm
checksum_type: sha256
description:
  Sudo (superuser do) allows a system administrator to give certain
  users (or groups of users) the ability to run some (or all) commands
  as root while logging all commands and arguments. Sudo operates on a
  per-command basis.  It is not a replacement for the shell.  Features
  include: the ability to restrict what commands a user may run on a
  per-host basis, copious logging of each command (providing a clear
  audit trail of who did what), a configurable timeout of the sudo
  command, and the ability to use the same configuration file (sudoers)
  on many different machines.


pkgId: ec644650e0e7b24b3bb5ea090419711ba68fb705a5e4bcb3f21701d654da2892
name: suitesparse
arch: src
version: 3.4.0
epoch: 0
release: 7.el6
summary: A collection of sparse matrix libraries
url: http://www.cise.ufl.edu/research/sparse/SuiteSparse
rpm_license: LGPLv2+ and GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: x86-022.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/suitesparse-3.4.0-7.el6.src.rpm
checksum_type: sha256
description:
  suitesparse is a collection of libraries for computations involving sparse
  matrices.  The package includes the following libraries:
    AMD         approximate minimum degree ordering
    BTF         permutation to block triangular form (beta)
    CAMD        constrained approximate minimum degree ordering
    COLAMD      column approximate minimum degree ordering
    CCOLAMD     constrained column approximate minimum degree ordering
    CHOLMOD     sparse Cholesky factorization
    CSparse     a concise sparse matrix package
    CXSparse    CSparse extended: complex matrix, int and long int support
    KLU         sparse LU factorization, primarily for circuit simulation
    LDL         a simple LDL' factorization
    SQPR        a multithread, multifrontal, rank-revealing sparse QR
                factorization method
    UMFPACK     sparse LU factorization
    UFconfig    configuration file for all the above packages.


pkgId: 50346745832bbc4fd2375224ae8b3b3eb0f664703449d976773468070f291e3e
name: svnkit
arch: src
version: 1.3.0
epoch: 0
release: 3.el6
summary: Pure Java Subversion client library
url: http://www.svnkit.com/
rpm_license: TMate License and ASL 1.1
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: ls20-bc2-13.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/svnkit-1.3.0-3.el6.src.rpm
checksum_type: sha256
description:
  SVNKit is a pure Java Subversion client library. You would like to use SVNKit
  when you need to access or modify Subversion repository from your Java
  application, be it a standalone program, plugin or web application. Being a
  pure Java program, SVNKit doesn't need any additional configuration or native
  binaries to work on any OS that runs Java.


pkgId: 4a2516cb83dc106acf46994ace39d4385dbe54eaf221dfb21cbe99a8748000e7
name: svrcore
arch: src
version: 4.0.4
epoch: 0
release: 5.1.el6
summary: Secure PIN handling using NSS crypto
url: http://www.mozilla.org/projects/security/pki/
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: js20-bc1-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/svrcore-4.0.4-5.1.el6.src.rpm
checksum_type: sha256
description:
  svrcore provides applications with several ways to handle secure PIN storage
  e.g. in an application that must be restarted, but needs the PIN to unlock
  the private key and other crypto material, without user intervention.  svrcore
  uses the facilities provided by NSS.


pkgId: defcad3a02ad5d3f93f64bc5ce743a399becd61d9707452fe05dcfac5e4ea3b7
name: swig
arch: src
version: 1.3.40
epoch: 0
release: 5.el6
summary: Connects C/C++/Objective C to some high-level programming languages
url: http://swig.sourceforge.net/
rpm_license: GPLv2+ and LGPLv2+ and BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/swig-1.3.40-5.el6.src.rpm
checksum_type: sha256
description:
  Simplified Wrapper and Interface Generator (SWIG) is a software
  development tool for connecting C, C++ and Objective C programs with a
  variety of high-level programming languages.  SWIG is primarily used
  with Perl, Python and Tcl/TK, but it has also been extended to Java,
  Eiffel and Guile.  SWIG is normally used to create high-level
  interpreted programming environments, systems integration, and as a
  tool for building user interfaces


pkgId: 6d31364e2063b577b1581883483d8bd4e4bbe9fbffac17208df294c21624df6c
name: symlinks
arch: src
version: 1.4
epoch: 0
release: 2.1.el6
summary: A utility which maintains a system's symbolic links
url: ftp://metalab.unc.edu/pub/Linux/utils/file/
rpm_license: Copyright only
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc1-8.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/symlinks-1.4-2.1.el6.src.rpm
checksum_type: sha256
description:
  The symlinks utility performs maintenance on symbolic links.  Symlinks
  checks for symlink problems, including dangling symlinks which point
  to nonexistent files.  Symlinks can also automatically convert
  absolute symlinks to relative symlinks.

  Install the symlinks package if you need a program for maintaining
  symlinks on your system.


pkgId: dc6054058e33538d314fdba010fcf8b2f727366bd4d1703d036bafd3c04c28c2
name: syslinux
arch: src
version: 3.86
epoch: 0
release: 1.1.el6
summary: Simple kernel loader which boots from a FAT filesystem
url: http://syslinux.zytor.com/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: x86-008.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/syslinux-3.86-1.1.el6.src.rpm
checksum_type: sha256
description:
  SYSLINUX is a suite of bootloaders, currently supporting DOS FAT
  filesystems, Linux ext2/ext3 filesystems (EXTLINUX), PXE network boots
  (PXELINUX), or ISO 9660 CD-ROMs (ISOLINUX).  It also includes a tool,
  MEMDISK, which loads legacy operating systems from these media.


pkgId: 1e247a2d67618d678d4f48e536251f37de8b1990939728ffdc5e881019b3bc9f
name: syslinux
arch: src
version: 4.02
epoch: 0
release: 16.el6_5
summary: Simple kernel loader which boots from a FAT filesystem
url: http://syslinux.zytor.com/wiki/index.php/The_Syslinux_Project
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: x86-029.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/syslinux-4.02-16.el6_5.src.rpm
checksum_type: sha256
description:
  SYSLINUX is a suite of bootloaders, currently supporting DOS FAT
  filesystems, Linux ext2/ext3 filesystems (EXTLINUX), PXE network boots
  (PXELINUX), or ISO 9660 CD-ROMs (ISOLINUX).


pkgId: 60eb9c851c1eb14dbfce5267a8e2bb23a05a5b5464b7fb5d9a48ad12ac9a84e8
name: sysstat
arch: src
version: 9.0.4
epoch: 0
release: 11.el6
summary: The sar and iostat system monitoring commands
url: http://perso.orange.fr/sebastien.godard/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sysstat-9.0.4-11.el6.src.rpm
checksum_type: sha256
description:
  This package provides the sar and iostat commands for Linux. Sar and
  iostat enable system monitoring of disk, network, and other IO
  activity.


pkgId: 666d023115bb3918342d81158d36ecbb0cf0b086340f28d22db78cc525708d8e
name: system-config-date
arch: src
version: 1.9.60
epoch: 0
release: 1.el6
summary: A graphical interface for modifying system date and time
url: http://fedorahosted.org/system-config-date
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: s390-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-date-1.9.60-1.el6.src.rpm
checksum_type: sha256
description:
  system-config-date is a graphical interface for changing the system date and
  time, configuring the system time zone, and setting up the NTP daemon to
  synchronize the time of the system with an NTP time server.


pkgId: a48062a259dad17e9ab646208f8a1580ff34d4c223d704da1390f1b2f46361b4
name: system-config-date-docs
arch: src
version: 1.0.11
epoch: 0
release: 1.el6
summary: Documentation for setting the system date and time
url: https://fedorahosted.org/system-config-date-docs
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Documentation
rpm_buildhost: x86-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-date-docs-1.0.11-1.el6.src.rpm
checksum_type: sha256
description:
  This package contains the online documentation for system-config-date, with
  which you can configure date, time and the use of timeservers on your system.


pkgId: e3b341a251a81570280a7439deb06bba702d1c7c2f3c3af7f9d37e19583e886a
name: system-config-keyboard
arch: src
version: 1.3.1
epoch: 0
release: 3.el6
summary: A graphical interface for modifying the keyboard
url: https://fedorahosted.org/system-config-keyboard/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-keyboard-1.3.1-3.el6.src.rpm
checksum_type: sha256
description:
  system-config-keyboard is a graphical user interface that allows
  the user to change the default keyboard of the system.


pkgId: 774ef165f5fde3def3661434d95c67bdd126531602cf008c640fec8e58beba05
name: system-config-language
arch: src
version: 1.3.4
epoch: 0
release: 5.el6
summary: A graphical interface for modifying the system language
url: https://fedorahosted.org/system-config-language/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: s390-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-language-1.3.4-5.el6.src.rpm
checksum_type: sha256
description:
  system-config-language is a graphical user interface that
  allows the user to change the default language of the system.


pkgId: fa68f321941377256b8e7fd099e42147199fed658caf35f47f2bd2816e226f06
name: system-config-network
arch: src
version: 1.6.0.el6.2
epoch: 0
release: 1.el6
summary: The GUI of the Network Adminstration Tool
url: http://fedoraproject.org/wiki/SystemConfig/network
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-network-1.6.0.el6.2-1.el6.src.rpm
checksum_type: sha256
description:
  This is the GUI of the network configuration tool,
  supporting Ethernet, Wireless, TokenRing, ADSL, ISDN and PPP.


pkgId: 98823489b35ec3c967f2f2415be921b6ab66dc6c5bccdb2c64f590095e7936b7
name: system-config-printer
arch: src
version: 1.1.16
epoch: 0
release: 17.el6
summary: A printer administration tool
url: http://cyberelk.net/tim/software/system-config-printer/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-010.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-printer-1.1.16-17.el6.src.rpm
checksum_type: sha256
description:
  system-config-printer is a graphical user interface that allows
  the user to configure a CUPS print server.


pkgId: fb6b2145846ed33d8a03395c00d2757f18802712bf53d013f11a9e8998fe13fa
name: system-config-services
arch: src
version: 0.99.45
epoch: 0
release: 1.el6.3
summary: Utility to start and stop system services
url: http://fedorahosted.org/system-config-services
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: s390-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-services-0.99.45-1.el6.3.src.rpm
checksum_type: sha256
description:
  system-config-services is a utility which allows you to configure which
  services should be enabled on your machine.


pkgId: ceaa291d7947c10a943e74140a4985c66d14a2437817bf5539a5e5ce0e07d043
name: system-config-services-docs
arch: src
version: 1.1.8
epoch: 0
release: 1.el6
summary: Documentation for configuring system services
url: https://fedorahosted.org/system-config-services-docs
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Documentation
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-services-docs-1.1.8-1.el6.src.rpm
checksum_type: sha256
description:
  This package contains the online documentation for system-config-services is a
  utility which allows you to configure which services should be enabled on your
  machine.


pkgId: af257d50896308c3beed2d25defd246f89263dc53705116ada090a6634927794
name: system-config-users
arch: src
version: 1.2.104
epoch: 0
release: 1.el6
summary: A graphical interface for administering users and groups
url: http://fedorahosted.org/system-config-users
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-users-1.2.104-1.el6.src.rpm
checksum_type: sha256
description:
  system-config-users is a graphical utility for administrating
  users and groups.  It depends on the libuser library.


pkgId: 831c7194a590d319a199e33d21f2f85be2e2fe584a62b535ca43f40a81cd5ce9
name: system-config-users-docs
arch: src
version: 1.0.8
epoch: 0
release: 1.el6
summary: Documentation for administering users and groups
url: https://fedorahosted.org/system-config-users-docs
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Documentation
rpm_buildhost: s390-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-config-users-docs-1.0.8-1.el6.src.rpm
checksum_type: sha256
description:
  This package contains the online documentation for system-config-users which is
  a graphical utility for administrating users and groups.


pkgId: d585b27214f50e76edf51cc08befcbf11833aecee458cec030e75ce9d94133cf
name: system-setup-keyboard
arch: src
version: 0.7
epoch: 0
release: 4.el6
summary: Hal keyboard layout callout
url: http://git.fedorahosted.org/git/system-setup-keyboard.git/
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/system-setup-keyboard-0.7-4.el6.src.rpm
checksum_type: sha256
description:
  system-setup-keyboard gets invoked by hal to apply the keyboard layout
  defined in /etc/sysconfig/keyboard.


pkgId: 2a7a7f5529af125665318907b98b5d37bd28856a3855e6a1c274785e7c3e2435
name: systemtap
arch: src
version: 1.2
epoch: 0
release: 9.el6
summary: Instrumentation System
url: http://sourceware.org/systemtap/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/System
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/systemtap-1.2-9.el6.src.rpm
checksum_type: sha256
description:
  SystemTap is an instrumentation system for systems running Linux 2.6.
  Developers can write instrumentation to collect data on the operation
  of the system.


pkgId: 535f50f54c71676d3d356fb3db56ff892d2ad45f8bf42488d63b8ab635c454e2
name: systemtap
arch: src
version: 1.6
epoch: 0
release: 4.el6
summary: Instrumentation System
url: http://sourceware.org/systemtap/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/System
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/systemtap-1.6-4.el6.src.rpm
checksum_type: sha256
description:
  SystemTap is an instrumentation system for systems running Linux.
  Developers can write instrumentation to collect data on the operation
  of the system.


pkgId: e3359f69264f52a2a0ccfb689a226ce75452b0be251b7fed19073141a72d32a2
name: systemtap
arch: src
version: 1.7
epoch: 0
release: 5.el6
summary: Programmable system-wide instrumentation system
url: http://sourceware.org/systemtap/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/System
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/systemtap-1.7-5.el6.src.rpm
checksum_type: sha256
description:
  SystemTap is an instrumentation system for systems running Linux.
  Developers can write instrumentation scripts to collect data on
  the operation of the system.  The base systemtap package contains/requires
  the components needed to locally develop and execute systemtap scripts.


pkgId: a610346558d025403c7c22bb86e505c9dd2c4d037970319a0a1d0b9fd213e5e5
name: sysvinit
arch: src
version: 2.87
epoch: 0
release: 3.dsf.el6
summary: Programs which control basic system processes
url: https://alioth.debian.org/projects/pkg-sysvinit/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-008.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/sysvinit-2.87-3.dsf.el6.src.rpm
checksum_type: sha256
description:
  The sysvinit package contains a group of processes that control
  the very basic functions of your system. sysvinit includes the init
  program, the first program started by the Linux kernel when the
  system boots. Init then controls the startup, running, and shutdown
  of all other programs.


pkgId: b89a8830dbd1fdf7bf26ed8b2f9cfd54db441fedb6be7bbdc702ad4290b9bd8c
name: t1lib
arch: src
version: 5.1.2
epoch: 0
release: 6.el6
summary: PostScript Type 1 font rasterizer
url: ftp://sunsite.unc.edu/pub/Linux/libs/graphics/t1lib-5.1.2.lsm
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: js20-bc2-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/t1lib-5.1.2-6.el6.src.rpm
checksum_type: sha256
description:
  T1lib is a rasterizer library for Adobe Type 1 Fonts. It supports
  rotation and transformation, kerning underlining and antialiasing. It
  does not depend on X11, but does provides some special functions for
  X11.

  AFM-files can be generated from Type 1 font files and font subsetting
  is possible.


pkgId: 8b6b3cae47c52fd8bca06a75e8e62058e06a2f4510b6b785402d415127e50b62
name: taglib
arch: src
version: 1.6.1
epoch: 0
release: 1.1.el6
summary: Audio Meta-Data Library
url: http://developer.kde.org/~wheeler/taglib.html
rpm_license: LGPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/taglib-1.6.1-1.1.el6.src.rpm
checksum_type: sha256
description:
  TagLib is a library for reading and editing the meta-data of several
  popular audio formats. Currently it supports both ID3v1 and ID3v2 for MP3
  files, Ogg Vorbis comments and ID3 tags and Vorbis comments in FLAC, MPC,
  Speex, WavPack, TrueAudio files, as well as APE Tags.


pkgId: 31eff9ed6499235aab9dfb8bab967447f33363076a429749c87097df1a61bd84
name: tagsoup
arch: src
version: 1.2.1
epoch: 0
release: 8.el6
summary: A SAX-compliant HTML parser written in Java
url: http://home.ccil.org/~cowan/XML/tagsoup/
rpm_license: ASL 2.0 and (GPLv2+ or AFL)
rpm_vendor: Red Hat, Inc.
rpm_group: Text Processing/Markup/XML
rpm_buildhost: x86-027.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tagsoup-1.2.1-8.el6.src.rpm
checksum_type: sha256
description:
  TagSoup is a SAX-compliant parser written in Java that, instead of
  parsing well-formed or valid XML, parses HTML as it is found in the wild: nasty
  and brutish, though quite often far from short. TagSoup is designed for people
  who have to process this stuff using some semblance of a rational application
  design. By providing a SAX interface, it allows standard XML tools to be
  applied to even the worst HTML.


pkgId: 1e22147f4501342289857ad8388bd958d5eec2823f846a3f23016a5dfad54137
name: talk
arch: src
version: 0.17
epoch: 0
release: 34.el6
summary: Talk client for one-on-one Internet chatting
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/talk-0.17-34.el6.src.rpm
checksum_type: sha256
description:
  The talk package provides client programs for the Internet talk
  protocol, which allows you to chat with other users on different
  systems.  Talk is a communication program which copies lines from one
  terminal to the terminal of another user.

  Install talk if you'd like to use talk for chatting with users on
  different systems.

url:
  http://web.archive.org/web/20070817165301/http://www.hcs.harvard.edu/~dholland/computers/netkit.html


pkgId: 1a23086ce3fad1ae77c14c809b0f47bac839511a14cdbcfac4b2fd7564eb6e9d
name: tar
arch: src
version: 1.23
epoch: 2
release: 11.el6
summary: A GNU file archiving program
url: http://www.gnu.org/software/tar/
rpm_license: GPLv3+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Archiving
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tar-1.23-11.el6.src.rpm
checksum_type: sha256
description:
  The GNU tar program saves many files together in one archive and can
  restore individual files (or all of the files) from that archive. Tar
  can also be used to add supplemental files to an archive and to update
  or list files in the archive. Tar includes multivolume support,
  automatic archive compression/decompression, the ability to perform
  remote archives, and the ability to perform incremental and full
  backups.

  If you want to use tar for remote backups, you also need to install
  the rmt package.


pkgId: 76549c67877ae52a7ef354e6721e31b5ed03884c64cf00a8b1dbc25c0fae6f06
name: taskjuggler
arch: src
version: 2.4.3
epoch: 0
release: 5.el6
summary: Project management tool
url: http://www.taskjuggler.org
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Productivity
rpm_buildhost: ppc-011.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/taskjuggler-2.4.3-5.el6.src.rpm
checksum_type: sha256
description:
  TaskJuggler is a modern and powerful project management tool. Its new approach
  to project planning and tracking is far superior to the commonly used Gantt
  chart editing tools. It has already been successfully used in many projects
  and scales easily to projects with hundreds of resources and thousands of
  tasks. It covers the complete spectrum of project management tasks from the
  first idea to the completion of the project. It assists you during project
  scoping, resource assignment, cost and revenue planning, and risk and
  communication management.


pkgId: 88557b3334f9864d8dffabb0a5a8f01013f5fa2f2fe344f73a2507659431e088
name: tbb
arch: src
version: 2.2
epoch: 0
release: 3.20090809.el6
summary: The Threading Building Blocks library abstracts low-level threading details
url: http://threadingbuildingblocks.org/
rpm_license: GPLv2 with exceptions
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: x86-012.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tbb-2.2-3.20090809.el6.src.rpm
checksum_type: sha256
description:
  Threading Building Blocks (TBB) is a C++ runtime library that
  abstracts the low-level threading details necessary for optimal
  multi-core performance.  It uses common C++ templates and coding style
  to eliminate tedious threading implementation work.

  TBB requires fewer lines of code to achieve parallelism than other
  threading models.  The applications you write are portable across
  platforms.  Since the library is also inherently scalable, no code
  maintenance is required as more processor cores become available.


pkgId: d18163e5974026ac8246466afaca54a143d756d266bcd8adb233c7a993343799
name: tboot
arch: src
version: 1.5.0
epoch: 0
release: 0.1.20110714.el6
summary: Performs a verified launch using Intel TXT
url: http://sourceforge.net/projects/tboot/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tboot-1.5.0-0.1.20110714.el6.src.rpm
checksum_type: sha256
description:
  Trusted Boot (tboot) is an open source, pre-kernel/VMM module that uses
  Intel Trusted Execution Technology (Intel TXT) to perform a measured
  and verified launch of an OS kernel/VMM.


pkgId: 745054e8b0013241c14ab7a939a15e580ce4e1c0a41455cc5b650b5f3edf433a
name: tcl
arch: src
version: 8.5.7
epoch: 1
release: 6.el6
summary: Tool Command Language, pronounced tickle
url: http://tcl.sourceforge.net/
rpm_license: TCL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tcl-8.5.7-6.el6.src.rpm
checksum_type: sha256
description:
  The Tcl (Tool Command Language) provides a powerful platform for
  creating integration applications that tie together diverse
  applications, protocols, devices, and frameworks. When paired with the
  Tk toolkit, Tcl provides a fastest and powerful way to create
  cross-platform GUI applications.  Tcl can also be used for a variety
  of web-related tasks and for creating powerful command languages for
  applications.


pkgId: 06b35dc557c18c4495d98f52326bdecdd99977ee8ebfcf03069d50ecf0ebb256
name: tcl-pgtcl
arch: src
version: 1.6.2
epoch: 0
release: 3.el6
summary: A Tcl client library for PostgreSQL
url: http://pgfoundry.org/projects/pgtclng/
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Databases
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tcl-pgtcl-1.6.2-3.el6.src.rpm
checksum_type: sha256
description:
  PostgreSQL is an advanced Object-Relational database management system.
  The tcl-pgtcl package contains Pgtcl, a Tcl client library for connecting
  to a PostgreSQL server.


pkgId: f2dc08eb7fde75cc0cae605e0a8652152057fde00d93f3ca69f87ef693a8f65d
name: tclx
arch: src
version: 8.4.0
epoch: 0
release: 15.el6
summary: Extensions for Tcl and Tk
url: http://tclx.sourceforge.net/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tclx-8.4.0-15.el6.src.rpm
checksum_type: sha256
description:
  Extended Tcl (TclX) is a set of extensions to the Tcl programming language.
  Extended Tcl is oriented towards system programming tasks and large
  application development. TclX provides additional interfaces to the
  operating system, and adds many new programming constructs, text manipulation
  and debugging tools.


pkgId: c85f8524ceccb8401663fcc830e19af6f15186358fe577dee5c4ec55defcdcb4
name: tcp_wrappers
arch: src
version: 7.6
epoch: 0
release: 56.3.el6
summary: A security tool which acts as a wrapper for TCP daemons
url: ftp://ftp.porcupine.org/pub/security/index.html
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tcp_wrappers-7.6-56.3.el6.src.rpm
checksum_type: sha256
description:
  The tcp_wrappers package provides small daemon programs which can
  monitor and filter incoming requests for systat, finger, FTP, telnet,
  rlogin, rsh, exec, tftp, talk and other network services.

  Install the tcp_wrappers program if you need a security tool for
  filtering incoming network services requests.

  This version also supports IPv6.


pkgId: 331915929d04e3919a0e60941360f5ec67a3fc9717895b293810823700bc5b85
name: tcpdump
arch: src
version: 4.0.0
epoch: 14
release: 11.20090921gitdf3cb4.2.el6
summary: A network traffic monitoring tool
url: http://www.tcpdump.org
rpm_license: BSD with advertising
rpm_vendor: Scientific Linux
rpm_group: Applications/Internet
rpm_buildhost: sl6.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/tcpdump-4.0.0-11.20090921gitdf3cb4.2.el6.src.rpm
checksum_type: sha256
description:
  Tcpdump is a command-line tool for monitoring network traffic.
  Tcpdump can capture and display the packet headers on a particular
  network interface or on all interfaces.  Tcpdump can display all of
  the packet headers, or just the ones that match particular criteria.

  Install tcpdump if you need a program to monitor network traffic.


pkgId: 77a29228d0193690b7b926bd5141f72555513108abe4708dfbdbb20bac2498fe
name: tcsh
arch: src
version: 6.17
epoch: 0
release: 12.el6
summary: An enhanced version of csh, the C shell
url: http://www.tcsh.org/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Shells
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tcsh-6.17-12.el6.src.rpm
checksum_type: sha256
description:
  Tcsh is an enhanced but completely compatible version of csh, the C
  shell.  Tcsh is a command language interpreter which can be used both
  as an interactive login shell and as a shell script command processor.
  Tcsh includes a command line editor, programmable word completion,
  spelling correction, a history mechanism, job control and a C language
  like syntax.


pkgId: d189a4c20fff89d54565e8b9deb1952af0bbaed1bb85d44e9748c5f037450dd0
name: teckit
arch: src
version: 2.5.1
epoch: 0
release: 4.1.el6
summary: Conversion library and mapping compiler
url: http://scripts.sil.org/teckit
rpm_license: LGPLv2+ or CPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/teckit-2.5.1-4.1.el6.src.rpm
checksum_type: sha256
description:
  TECkit is a low-level toolkit intended to be used by other
  applications that need to perform encoding conversions (e.g., when
  importing legacy data into a Unicode-based application). The
  primary component of the TECkit package is therefore a library that
  performs conversions; this is the "TECkit engine". The engine
  relies on mapping tables in a specific binary format (for which
  documentation is available); there is a compiler that creates such
  tables from a human-readable mapping description (a simple text file).


pkgId: 6209075fec2d3eef24660a645e668808d99cf312c2584b8975e34978b4fdf836
name: telnet
arch: src
version: 0.17
epoch: 1
release: 46.el6
summary: The client program for the Telnet remote login protocol
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/telnet-0.17-46.el6.src.rpm
checksum_type: sha256
description:
  Telnet is a popular protocol for logging into remote systems over the
  Internet. The package provides a command line Telnet client


pkgId: c5731a07552dfcd62f194473481a1b98dcc45289954c368ef8ed35811b15b349
name: terminus-fonts
arch: src
version: 4.30
epoch: 0
release: 1.el6
summary: Clean fixed width font
url: http://www.is-vn.bg/hamster/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/terminus-fonts-4.30-1.el6.src.rpm
checksum_type: sha256
description:
  The Terminus Font is designed for long (8 and more hours per day)
  work with computers.

  Version 4.30 contains 850 characters, covers about 120 language
  sets and supports ISO8859-1/2/5/7/9/13/15/16, Paratype-PT154/PT254,
  KOI8-R/U/E/F, Esperanto, many IBM, Windows and Macintosh code pages,
  as well as the IBM VGA, vt100 and xterm pseudographic characters.

  The sizes present are 6x12, 8x14, 8x16, 10x20, 11x22, 12x24, 14x28
  and 16x32. The styles are normal and bold (except for 6x12),
  plus EGA/VGA-bold for 8x14 and 8x16.

  The font is available for the Linux console and for X11.

  This package contains the fonts to use with X11.


pkgId: eed5952f5e0eb5f25f75bc3538784d5275fdfea782284a0cdcb49539d19d88d4
name: tetex-tex4ht
arch: src
version: 1.0.2008_09_16_1413
epoch: 0
release: 4.el6
summary: Translates TeX and LaTeX into HTML or XML+MathML
url: http://www.cse.ohio-state.edu/~gurari/TeX4ht/
rpm_license: LPPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: ppc-012.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tetex-tex4ht-1.0.2008_09_16_1413-4.el6.src.rpm
checksum_type: sha256
description:
  A converter from TeX and LaTeX to hypertext (HTML, XML, etc.), providing a
  configurable (La)TeX-based authoring system for hypertext. When converting
  to XML, you can use MathML instead of images for equation representation.

  This package can also be used to translated to XML that OpenOffice.org can
  understand, which then gives the user a path by which to convert a document
  to rtf for import into Microsoft Word.


pkgId: 5bd7a80202e6c694aaf5c3cfd156661bd0b416106ae61933620b555387d4e4ea
name: texi2html
arch: src
version: 1.82
epoch: 0
release: 5.1.el6
summary: A highly customizable texinfo to HTML and other formats translator
url: http://www.nongnu.org/texi2html/
rpm_license: GPLv2+ and OFSFDL and (CC-BY-SA or GPLv2)
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Text
rpm_buildhost: x86-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/texi2html-1.82-5.1.el6.src.rpm
checksum_type: sha256
description:
  The basic purpose of texi2html is to convert Texinfo documents into HTML,
  and other formats.  Configuration files written in perl provide fine degree
  of control over the final output, allowing most every aspect of the final
  output not specified in the Texinfo input file to be specified.


pkgId: 145837e914198000b5bb118bbb1be137732db5087b4e048d9189825fe8647ab0
name: texinfo
arch: src
version: 4.13a
epoch: 0
release: 8.el6
summary: Tools needed to create Texinfo format documentation files
url: http://www.gnu.org/software/texinfo/
rpm_license: GPLv3+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/texinfo-4.13a-8.el6.src.rpm
checksum_type: sha256
description:
  Texinfo is a documentation system that can produce both online
  information and printed output from a single source file. The GNU
  Project uses the Texinfo file format for most of its documentation.

  Install texinfo if you want a documentation system for producing both
  online and print documentation from the same source file and/or if you
  are going to write documentation for the GNU Project.


pkgId: e15290cf825fbf8071b099058549f8802411681e507cd7bb1d047e75554ba2f9
name: texlive
arch: src
version: 2007
epoch: 0
release: 56.el6
summary: Binaries for the TeX formatting system
url: http://tug.org/texlive/
rpm_license: GPLv2 and BSD and Public Domain and LGPLv2+ and GPLv2+ and LPPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/texlive-2007-56.el6.src.rpm
checksum_type: sha256
description:
  TeXLive is an implementation of TeX for Linux or UNIX systems. TeX takes
  a text file and a set of formatting commands as input and creates a
  printable file as output. Usually, TeX is used in conjunction with
  a higher level formatting package like LaTeX or PlainTeX, since TeX by
  itself is not very user-friendly.

  Install texlive if you want to use the TeX text formatting system. Consider
  to install texlive-latex (a higher level formatting package which provides
  an easier-to-use interface for TeX).

  The TeX documentation is located in the texlive-doc package.


pkgId: ae6e276f934e5557359b29f9d990127cef3f6cde4d2af263537faf5593b1bce1
name: texlive-texmf
arch: src
version: 2007
epoch: 0
release: 35.el6
summary: Architecture independent parts of the TeX formatting system
url: http://tug.org/texlive/
rpm_license: Artistic 2.0 and GPLv2 and GPLv2+ and LGPLv2+ and LPPL and MIT and Public Domain and UCD and Utopia
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/texlive-texmf-2007-35.el6.src.rpm
checksum_type: sha256
description:
  texlive-texmf is a texmf distribution based upon TeX Live. All of the files
  contained in these packages are from the TeX Live zip files. The intent is to
  provide a packaging similar in style and layout to teTeX.


pkgId: 12578e7faa41233cc1a2beeca9c65ec1df70088408169e6759df8076bcfca6c8
name: tftp
arch: src
version: 0.49
epoch: 0
release: 5.1.el6
summary: The client for the Trivial File Transfer Protocol (TFTP)
url: http://www.kernel.org/pub/software/network/tftp/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: js20-bc2-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tftp-0.49-5.1.el6.src.rpm
checksum_type: sha256
description:
  The Trivial File Transfer Protocol (TFTP) is normally used only for
  booting diskless workstations.  The tftp package provides the user
  interface for TFTP, which allows users to transfer files to and from a
  remote machine.  This program and TFTP provide very little security,
  and should not be enabled unless it is expressly needed.


pkgId: 7b888af67288745f76ce1a7d1dc7c38778228be3251a0ec21d7f02cb8a547feb
name: thai-scalable-fonts
arch: src
version: 0.4.12
epoch: 0
release: 2.1.el6
summary: Thai TrueType fonts
url: http://linux.thai.net/projects/thaifonts-scalable
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: spud.z900.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/thai-scalable-fonts-0.4.12-2.1.el6.src.rpm
checksum_type: sha256
description:
  thaifonts-scalable provides a collection of free scalable Thai fonts.

  Thai scalable fonts included here are:
  - Kinnari, Garuda and Norasi from the National Font project
  - DB Thai Text from DearBook
  - TlwgMono, PseudoMono, Purisa by TLWG


pkgId: d9f7f0fbf561da837981081698302408f8e7abd83ee40c65294c2ac3577b26db
name: tibetan-machine-uni-fonts
arch: src
version: 1.901
epoch: 0
release: 5.el6
summary: Tibetan Machine Uni font for Tibetan, Dzongkha and Ladakhi
rpm_license: GPLv3+ with exceptions
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tibetan-machine-uni-fonts-1.901-5.el6.src.rpm
checksum_type: sha256
description:
  Tibetan Machine Uni is an TrueType OpenType, Unicode font released by THDL
  project. The font supports Tibetan, Dzongkha and Ladakhi in dbu-can script
  with full support for the Sanskrit combinations found in chos skad text.

url:
  http://www.thlib.org/tools/#wiki=/access/wiki/site/26a34146-33a6-48ce-001e-f16ce7908a6a/tibetan%20machine%20uni.html


pkgId: 8588e0d6e994f5577dd3bdc160e0958d0d92e3913f41fa155617a29f4ba17234
name: tidy
arch: src
version: 0.99.0
epoch: 0
release: 19.20070615.1.el6
summary: Utility to clean up and pretty print HTML/XHTML/XML
url: http://tidy.sourceforge.net/
rpm_license: W3C
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Text
rpm_buildhost: js20-bc1-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tidy-0.99.0-19.20070615.1.el6.src.rpm
checksum_type: sha256
description:
  When editing HTML it's easy to make mistakes. Wouldn't it be nice if
  there was a simple way to fix these mistakes automatically and tidy up
  sloppy editing into nicely layed out markup? Well now there is! Dave
  Raggett's HTML TIDY is a free utility for doing just that. It also
  works great on the atrociously hard to read markup generated by
  specialized HTML editors and conversion tools, and can help you
  identify where you need to pay further attention on making your pages
  more accessible to people with disabilities.


pkgId: d825419aa8b4abb0ff9393c372285456b02b61ae3311ca5784dd4e27334dd73c
name: tigervnc
arch: src
version: 1.0.90
epoch: 0
release: 0.10.20100115svn3945.el6
summary: A TigerVNC remote display system
url: http://www.tigervnc.com
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tigervnc-1.0.90-0.10.20100115svn3945.el6.src.rpm
checksum_type: sha256
description:
  Virtual Network Computing (VNC) is a remote display system which
  allows you to view a computing 'desktop' environment not only on the
  machine where it is running, but from anywhere on the Internet and
  from a wide variety of machine architectures.  This package contains a
  client which will allow you to connect to other desktops running a VNC
  server.


pkgId: 507edb979edae1b76f7357920615405e9da1164f2b61df33c0c70eed892a59da
name: time
arch: src
version: 1.7
epoch: 0
release: 37.1.el6
summary: A GNU utility for monitoring a program's use of system resources
url: http://www.gnu.org/software/time/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/time-1.7-37.1.el6.src.rpm
checksum_type: sha256
description:
  The GNU time utility runs another program, collects information about
  the resources used by that program while it is running, and displays
  the results.


pkgId: 94e2b748347a9ccb521b0b96518dfa2f07305d8e121dd4948ee646a39ae72d85
name: tix
arch: src
version: 8.4.3
epoch: 1
release: 5.el6
summary: A set of extension widgets for Tk
url: http://tix.sourceforge.net/
rpm_license: BSD
rpm_vendor: Scientific Linux
rpm_group: Development/Languages
rpm_buildhost: fortythree.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/tix-8.4.3-5.el6.src.rpm
checksum_type: sha256
description:
  Tix, the Tk Interface eXtension, is a powerful set of user interface
  components that expands the capabilities of your Tcl/Tk and Python
  applications. Using Tix together with Tk will greatly enhance the
  appearance and functionality of your application.


pkgId: 4514cf99f5be4e4da0a437d2aff7c1d9859af9638ab0635a59baf27bdec59aa3
name: tk
arch: src
version: 8.5.7
epoch: 1
release: 5.el6
summary: The graphical toolkit for the Tcl scripting language
url: http://tcl.sourceforge.net
rpm_license: TCL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: ppc-010.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tk-8.5.7-5.el6.src.rpm
checksum_type: sha256
description:
  When paired with the Tcl scripting language, Tk provides a fast and powerful
  way to create cross-platform GUI applications.


pkgId: 3e264d4cddaa86e5307ea6429d4b89ba9fd7ca2464142575ba10f7a7b73361f6
name: tmpwatch
arch: src
version: 2.9.16
epoch: 0
release: 3.el6
summary: A utility for removing files based on when they were last accessed
url: https://fedorahosted.org/tmpwatch/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: js20-bc1-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tmpwatch-2.9.16-3.el6.src.rpm
checksum_type: sha256
description:
  The tmpwatch utility recursively searches through specified
  directories and removes files which have not been accessed in a
  specified period of time.  Tmpwatch is normally used to clean up
  directories which are used for temporarily holding files (for example,
  /tmp).  Tmpwatch ignores symlinks, won't switch filesystems and only
  removes empty directories and regular files.


pkgId: aefa15159e3489ce4d4fdf5ef3b54cff719117bd9282c4e83fb987514dcb903b
name: tn5250
arch: src
version: 0.17.4
epoch: 0
release: 3.2.el6
summary: 5250 Telnet protocol and Terminal
url: http://tn5250.sourceforge.net/
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tn5250-0.17.4-3.2.el6.src.rpm
checksum_type: sha256
description:
  tn5250 is an implementation of the 5250 Telnet protocol.
  It provides the 5250 library and a 5250 terminal emulation.


pkgId: c3808aabc1d331c6273c9418dff151923809af51ce1def498d613f78dd81a1dc
name: tog-pegasus
arch: src
version: 2.11.0
epoch: 2
release: 2.el6
summary: OpenPegasus WBEM Services for Linux
url: http://www.openpegasus.org
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tog-pegasus-2.11.0-2.el6.src.rpm
checksum_type: sha256
description:
  OpenPegasus WBEM Services for Linux enables management solutions that deliver
  increased control of enterprise resources. WBEM is a platform and resource
  independent DMTF standard that defines a common information model and
  communication protocol for monitoring and controlling resources from diverse
  sources.


pkgId: 2c5cb825b387491c75fc0938dc43d944d30f8bde3b2c4e3348f715c882f1b964
name: tokyocabinet
arch: src
version: 1.4.33
epoch: 0
release: 6.el6
summary: A modern implementation of a DBM
url: http://1978th.net/tokyocabinet/
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tokyocabinet-1.4.33-6.el6.src.rpm
checksum_type: sha256
description:
  Tokyo Cabinet is a library of routines for managing a database. It is the
  successor of QDBM. Tokyo Cabinet runs very fast. For example, the time required
  to store 1 million records is 1.5 seconds for a hash database and 2.2 seconds
  for a B+ tree database. Moreover, the database size is very small and can be up
  to 8EB. Furthermore, the scalability of Tokyo Cabinet is great.


pkgId: 95857a7a7989591351bf480f85a81ef2832774554c30823f4ab300fc74981360
name: tomcat6
arch: src
version: 6.0.24
epoch: 0
release: 105.el6_8
summary: Apache Servlet/JSP Engine, RI for Servlet 2.5/JSP 2.1 API
url: http://tomcat.apache.org/
rpm_license: ASL 2.0
rpm_vendor: Scientific Linux
rpm_group: Networking/Daemons
rpm_buildhost: sl6.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/tomcat6-6.0.24-105.el6_8.src.rpm
checksum_type: sha256
description:
  Tomcat is the servlet container that is used in the official Reference
  Implementation for the Java Servlet and JavaServer Pages technologies.
  The Java Servlet and JavaServer Pages specifications are developed by
  Sun under the Java Community Process.

  Tomcat is developed in an open and participatory environment and
  released under the Apache Software License version 2.0. Tomcat is intended
  to be a collaboration of the best-of-breed developers from around the world.


pkgId: 339cf44fedbd6eb383e896b8560f09a7d703e2d83ff781fdd895867ae32fca12
name: tomcatjss
arch: src
version: 2.1.0
epoch: 0
release: 1.el6
summary: JSSE implementation using JSS for Tomcat
url: http://pki.fedoraproject.org/
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: x86-010.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tomcatjss-2.1.0-1.el6.src.rpm
checksum_type: sha256
description:
  A Java Secure Socket Extension (JSSE) implementation
  using Java Security Services (JSS) for Tomcat 6.

  NOTE:  The 'tomcatjss' package conflicts with the 'tomcat-native' package
         because it uses an underlying NSS security model rather than the
         OpenSSL security model, so these two packages may not co-exist.


pkgId: 44b0ebedcce61ddd1d0c2f64a23e52b48f55952faf5273d4d54e423694b5863a
name: totem
arch: src
version: 2.28.6
epoch: 0
release: 2.el6
summary: Movie player for GNOME
url: http://projects.gnome.org/totem/
rpm_license: GPLv2+ with exceptions
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/totem-2.28.6-2.el6.src.rpm
checksum_type: sha256
description:
  Totem is simple movie player for the GNOME desktop. It features a
  simple playlist, a full-screen mode, seek and volume controls, as well as
  a pretty complete keyboard navigation.

  Totem is extensible through a plugin system.


pkgId: fafd25ff1703f647e39b4e0c2465755b769a359dd925e6a793dd56276f07f936
name: tpm-tools
arch: src
version: 1.3.4
epoch: 0
release: 2.el6
summary: Management tools for the TPM hardware
url: http://trousers.sourceforge.net
rpm_license: CPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc1-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tpm-tools-1.3.4-2.el6.src.rpm
checksum_type: sha256
description:
  tpm-tools is a group of tools to manage and utilize the Trusted Computing
  Group's TPM hardware. TPM hardware can create, store and use RSA keys
  securely (without ever being exposed in memory), verify a platform's
  software state using cryptographic hashes and more.


pkgId: a86d87ab9ef6251fa39434bccf196f87c963e99899ca9e2eae26deb0c6044822
name: trace-cmd
arch: src
version: 1.0.4
epoch: 0
release: 7.el6
summary: trace-cmd is a user interface to Ftrace
url: http://www.kernel.org/pub/linux/analysis/trace-cmd/
rpm_license: GPLv2 and LGPLv2.1
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: ppc-008.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/trace-cmd-1.0.4-7.el6.src.rpm
checksum_type: sha256
description:
  trace-cmd is a user interface to Ftrace. Instead of needing to use the
  debugfs directly, trace-cmd will handle of setting of options and
  tracers and will record into a data file.


pkgId: 87929e043dbdb1ef3405ebbcf55656a1e69377481f9bac6290a7f5dc853aba7d
name: traceroute
arch: src
version: 2.0.14
epoch: 3
release: 2.el6
summary: Traces the route taken by packets over an IPv4/IPv6 network
url: http://traceroute.sourceforge.net
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/traceroute-2.0.14-2.el6.src.rpm
checksum_type: sha256
description:
  The traceroute utility displays the route used by IP packets on their
  way to a specified network (or Internet) host.  Traceroute displays
  the IP number and host name (if possible) of the machines along the
  route taken by the packets.  Traceroute is used as a network debugging
  tool.  If you're having network connectivity problems, traceroute will
  show you where the trouble is coming from along the route.

  Install traceroute if you need a tool for diagnosing network connectivity
  problems.


pkgId: 73d8edabd6c4cb883b6b5104f0129a32f38d68ae9381af039c6c75b62d3f8b76
name: transfig
arch: src
version: 3.2.5
epoch: 1
release: 10.el6
summary: Utility for converting FIG files (made by xfig) to other formats
url: http://www.xfig.org/
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: ppc-017.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/transfig-3.2.5-10.el6.src.rpm
checksum_type: sha256
description:
  The transfig utility creates a makefile which translates FIG (created
  by xfig) or PIC figures into a specified LaTeX graphics language (for
  example, PostScript(TM)).  Transfig is used to create TeX documents
  which are portable (i.e., they can be printed in a wide variety of
  environments).

  Install transfig if you need a utility for translating FIG or PIC
  figures into certain graphics languages.


pkgId: 7627c4bdc6070f377b3459a4b37681e1f9746ac74c8f327d142900c1db2ecaad
name: tree
arch: src
version: 1.5.3
epoch: 0
release: 2.el6
summary: File system tree viewer
url: http://mama.indstate.edu/users/ice/tree/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/File
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tree-1.5.3-2.el6.src.rpm
checksum_type: sha256
description:
  The tree utility recursively displays the contents of directories in a
  tree-like format.  Tree is basically a UNIX port of the DOS tree
  utility.


pkgId: 12771b27748b023ce662634317f8a626802fa6c90cd8e3d236f631b4863e560d
name: trilead-ssh2
arch: src
version: 213
epoch: 0
release: 6.2.el6
summary: SSH-2 protocol implementation in pure Java
url: http://www.trilead.com/Products/Trilead_SSH_for_Java/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: js20-bc1-8.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/trilead-ssh2-213-6.2.el6.src.rpm
checksum_type: sha256
description:
  Trilead SSH-2 for Java is a library which implements the SSH-2 protocol in pure
  Java (tested on J2SE 1.4.2 and 5.0). It allows one to connect to SSH servers
  from within Java programs. It supports SSH sessions (remote command execution
  and shell access), local and remote port forwarding, local stream forwarding,
  X11 forwarding and SCP. There are no dependencies on any JCE provider, as all
  crypto functionality is included.


pkgId: 95d1200b9be453269585c6d65ec9ed72b7f98e79e38fb43f413230c76f0c66fa
name: trousers
arch: src
version: 0.3.13
epoch: 0
release: 2.el6
summary: TCG's Software Stack v1.2
url: http://trousers.sourceforge.net
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-018.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/trousers-0.3.13-2.el6.src.rpm
checksum_type: sha256
description:
  TrouSerS is an implementation of the Trusted Computing Group's Software Stack
  (TSS) specification. You can use TrouSerS to write applications that make use
  of your TPM hardware. TPM hardware can create, store and use RSA keys
  securely (without ever being exposed in memory), verify a platform's software
  state using cryptographic hashes and more.


pkgId: 5b2b831d74c6090a91bb72794a3026a48f73d7fa4adcb585fc6fbe0ae462c04b
name: ttmkfdir
arch: src
version: 3.0.9
epoch: 0
release: 32.1.el6
summary: Utility to create fonts.scale files for truetype fonts
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/ttmkfdir-3.0.9-32.1.el6.src.rpm
checksum_type: sha256
description:
  ttmkfdir is a utility used to create fonts.scale files in
  TrueType font directories in order to prepare them for use
  by the font server.


pkgId: 06ff1f2e0cc6c08b69f5086ab15d9506b988aed1158a7ec09c7abf415ca5ac96
name: tuna
arch: src
version: 0.10.3
epoch: 0
release: 2.el6
summary: Application tuning GUI & command line utility
url: http://userweb.kernel.org/~acme/tuna/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tuna-0.10.3-2.el6.src.rpm
checksum_type: sha256
description:
  Provides interface for changing scheduler and IRQ tunables, at whole CPU and at
  per thread/IRQ level. Allows isolating CPUs for use by a specific application
  and moving threads and interrupts to a CPU by just dragging and dropping them.
  Operations can be done on CPU sockets, understanding CPU topology.

  Can be used as a command line utility without requiring the GUI libraries to be
  installed.


pkgId: a002a84cdb8c146ec8fb796ff37410b02a6c529f10a247e4dc908ba24a90b5fb
name: tunctl
arch: src
version: 1.5
epoch: 0
release: 3.el6
summary: Create and remove virtual network interfaces
url: http://tunctl.sourceforge.net/
rpm_license: GPL+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-012.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tunctl-1.5-3.el6.src.rpm
checksum_type: sha256
description:
  tunctl is a tool to set up and maintain persistent TUN/TAP network
  interfaces, enabling user applications access to the wire side of a
  virtual nework interface. Such interfaces is useful for connecting VPN
  software, virtualization, emulation and a number of other similar
  applications to the network stack.

  tunctl originates from the User Mode Linux project.


pkgId: b7be5ed63b3472fe24cfb24ffd3e053c245cd9c3d838a11c0f0c52927fcf7144
name: tuned
arch: src
version: 0.2.11
epoch: 0
release: 8.el6
summary: A dynamic adaptive system tuning daemon
url: https://fedorahosted.org/tuned/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: s390-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/tuned-0.2.11-8.el6.src.rpm
checksum_type: sha256
description:
  The tuned package contains a daemon that tunes system settings dynamically.
  It does so by monitoring the usage of several system components periodically.
  Based on that information components will then be put into lower or higher
  power saving modes to adapt to the current usage. Currently only ethernet
  network and ATA harddisk devices are implemented.


pkgId: 54744d5b91da19a1caedec72212ea17a50128961c4803655d8d8423209f414b5
name: un-core-fonts
arch: src
version: 1.0.2
epoch: 0
release: 0.15.080608.el6
summary: Un Core family of Korean TrueType fonts
url: http://kldp.net/projects/unfonts/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/un-core-fonts-1.0.2-0.15.080608.el6.src.rpm
checksum_type: sha256
description:
  The UN set of Korean TrueType fonts is derived from the HLaTeX Type1 fonts
  made by Koaunghi Un in 1998. They were converted to TrueType with
  FontForge(PfaEdit) by Won-kyu Park in 2003.
  The Un Core set is composed of:

  - UnBatang: serif
  - UnDinaru: fantasy
  - UnDotum: sans-serif
  - UnGraphic: sans-serif style
  - UnGungseo: cursive, brush-stroke
  - UnPilgi: script


pkgId: c1964b7bf1bc566c4fe5bf1dd9edb147440b49d6496aadfab2886eca14115b2d
name: unbound
arch: src
version: 1.4.20
epoch: 0
release: 23.el6.3
summary: Validating, recursive, and caching DNS(SEC) resolver
url: http://www.nlnetlabs.nl/unbound/
rpm_license: BSD
rpm_vendor: Scientific Linux
rpm_group: System Environment/Daemons
rpm_buildhost: sl6.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/unbound-1.4.20-23.el6.3.src.rpm
checksum_type: sha256
description:
  Unbound is a validating, recursive, and caching DNS(SEC) resolver.

  The C implementation of Unbound is developed and maintained by NLnet
  Labs. It is based on ideas and algorithms taken from a java prototype
  developed by Verisign labs, Nominet, Kirei and ep.net.

  Unbound is designed as a set of modular components, so that also
  DNSSEC (secure DNS) validation and stub-resolvers (that do not run
  as a server, but are linked into an application) are easily possible.


pkgId: d3b01a9b13ee1330f8681a90a20075de01b14683c43ce21fb2e3f5344e892302
name: unicap
arch: src
version: 0.9.5
epoch: 0
release: 4.el6
summary: Library to access different kinds of (video) capture devices
url: http://www.unicap-imaging.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/unicap-0.9.5-4.el6.src.rpm
checksum_type: sha256
description:
  Unicap provides a uniform interface to video capture devices. It allows
  applications to use any supported video capture device via a single API.
  The included ucil library provides easy to use functions to render text
  and graphic overlays onto video images.


pkgId: 4f2ee42403e37715d4f70dcd34f95a30b775690303fe9c76b300576f15103202
name: unique
arch: src
version: 1.1.4
epoch: 0
release: 2.el6
summary: Single instance support for applications
url: http://www.gnome.org/~ebassi/source/
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/unique-1.1.4-2.el6.src.rpm
checksum_type: sha256
description:
  Unique is a library for writing single instance applications, that is
  applications that are run once and every further call to the same binary
  either exits immediately or sends a command to the running instance.


pkgId: 09349de74177b493f958ea6fe105b21fa5b971d522ee4d3410ece1ecc2343ab1
name: units
arch: src
version: 1.87
epoch: 0
release: 7.el6
summary: A utility for converting amounts from one unit to another
url: http://www.gnu.org/software/units/units.html
rpm_license: GPLv3+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Engineering
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/units-1.87-7.el6.src.rpm
checksum_type: sha256
description:
  Units converts an amount from one unit to another, or tells you what
  mathematical operation you need to perform to convert from one unit to
  another. The units program can handle multiplicative scale changes as
  well as conversions such as Fahrenheit to Celsius.


pkgId: 003218bcb9efb5fd1d27f5c5411443531cab2f6994e49125da73e5294b079995
name: unixODBC
arch: src
version: 2.2.14
epoch: 0
release: 11.el6
summary: A complete ODBC driver manager for Linux
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/unixODBC-2.2.14-11.el6.src.rpm
checksum_type: sha256
description:
  Install unixODBC if you want to access databases through ODBC.
  You will also need the mysql-connector-odbc package if you want to access
  a MySQL database, and/or the postgresql-odbc package for PostgreSQL.


pkgId: 6245cc8f8691f41a53427dd3ae93c199a5563f645fe064030165b89559346d77
name: unzip
arch: src
version: 6.0
epoch: 0
release: 1.el6
summary: A utility for unpacking zip files
url: http://www.info-zip.org/UnZip.html
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Archiving
rpm_buildhost: js20-bc2-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/unzip-6.0-1.el6.src.rpm
checksum_type: sha256
description:
  The unzip utility is used to list, test, or extract files from a zip
  archive.  Zip archives are commonly found on MS-DOS systems.  The zip
  utility, included in the zip package, creates zip archives.  Zip and
  unzip are both compatible with archives created by PKWARE(R)'s PKZIP
  for MS-DOS, but the programs' options and default behaviors do differ
  in some respects.

  Install the unzip package if you need to list, test or extract files from
  a zip archive.


pkgId: 793b6d8c5f6818bb1b0a02a854d34edcf378a9653d25c59a493b9dd8cacc4a61
name: upstart
arch: src
version: 0.6.5
epoch: 0
release: 10.el6
summary: An event-driven init system
url: http://upstart.ubuntu.com
rpm_license: GPLv2 and LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/upstart-0.6.5-10.el6.src.rpm
checksum_type: sha256
description:
  Upstart is an event-based replacement for the /sbin/init daemon which
  handles starting of tasks and services during boot, stopping them
  during shutdown and supervising them while the system is running.


pkgId: ff9ba8ee65449c848975bac3052f14058eb6455fe2e1f480d464cfdfedc54dcb
name: urlview
arch: src
version: 0.9
epoch: 0
release: 7.el6
summary: URL extractor/launcher
url: ftp://ftp.mutt.org/pub/mutt/contrib/urlview-0.9.README
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/urlview-0.9-7.el6.src.rpm
checksum_type: sha256
description:
  urlview is a screen oriented program for extracting URLs from text
  files and displaying a menu from which you may launch a command to
  view a specific item.


pkgId: 3862288aba815e511df0ba365e84c1d3cd7fd508d4daa3549e54afeab6ebc344
name: urw-fonts
arch: src
version: 2.4
epoch: 0
release: 10.el6
summary: Free versions of the 35 standard PostScript fonts
url: http://svn.ghostscript.com/ghostscript/tags/urw-fonts-1.0.7pre44/
rpm_license: GPL+ with exceptions
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/urw-fonts-2.4-10.el6.src.rpm
checksum_type: sha256
description:
  Free, good quality versions of the 35 standard PostScript(TM) fonts,
  donated under the GPL by URW++ Design and Development GmbH.

  Install the urw-fonts package if you need free versions of standard
  PostScript fonts.


pkgId: 440220359acfe510bfcaae57c439122fd548e328c36ea1ae1a237733ec918ac1
name: usbmuxd
arch: src
version: 1.0.2
epoch: 0
release: 1.el6
summary: Daemon for communicating with Apple's iPod Touch and iPhone
url: http://marcansoft.com/uploads/
rpm_license: GPLv3+ or GPLv2+ and LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/usbmuxd-1.0.2-1.el6.src.rpm
checksum_type: sha256
description:
  usbmuxd is a daemon used for communicating with Apple's iPod Touch and iPhone
  devices. It allows multiple services on the device to be accessed
  simultaneously.


pkgId: 5e23090fd1021d2b6e592a3ba1c12cdce2e5d5af6ab5fdb8bcfb9a4e794602f1
name: usbredir
arch: src
version: 0.4.3
epoch: 0
release: 1.el6
summary: USB network redirection protocol libraries
url: http://spice-space.org/page/UsbRedir
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/usbredir-0.4.3-1.el6.src.rpm
checksum_type: sha256
description:
  usbredir is a protocol for redirection USB traffic from a single USB device,
  to a different (virtual) machine then the one to which the USB device is
  attached. This package contains a number of libraries to help implementing
  support for usbredir:

  usbredirparser:
  A library containing the parser for the usbredir protocol

  usbredirhost:
  A library implementing the usb-host side of a usbredir connection.
  All that an application wishing to implement an usb-host needs to do is:
  * Provide a libusb device handle for the device
  * Provide write and read callbacks for the actual transport of usbredir data
  * Monitor for usbredir and libusb read/write events and call their handlers


pkgId: bb68d41c9c22f5abfee6a7ae209acb028b06344a5f205a841c54f49c2b71e90a
name: usermode
arch: src
version: 1.102
epoch: 0
release: 3.el6
summary: Tools for certain user account management tasks
url: https://fedorahosted.org/usermode/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/usermode-1.102-3.el6.src.rpm
checksum_type: sha256
description:
  The usermode package contains the userhelper program, which can be
  used to allow configured programs to be run with superuser privileges
  by ordinary users.


pkgId: f7780c37b2f0de455415a208f0e8b31ee6ca5480e3c0e407caf34532ac852637
name: userspace-rcu
arch: src
version: 0.7.9
epoch: 0
release: 2.el6rhs
summary: RCU (read-copy-update) implementation in user space
url: http://lttng.org/urcu/
rpm_license: LGPLv2+
rpm_vendor: Scientific Linux
rpm_group: System Environment/Libraries
rpm_buildhost: sl6-kojislave01.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/userspace-rcu-0.7.9-2.el6rhs.src.rpm
checksum_type: sha256
description:
  This data synchronization library provides read-side access which scales
  linearly with the number of cores. It does so by allowing multiples copies
  of a given data structure to live at the same time, and by monitoring
  the data structure accesses to detect grace periods after which memory
  reclamation is possible.


pkgId: f5803c1e0b9e088b39af85791addc9220acb041214d682c26ac56923819455c1
name: ustr
arch: src
version: 1.0.4
epoch: 0
release: 9.1.el6
summary: String library, very low memory overhead, simple to import
url: http://www.and.org/ustr/
rpm_license: MIT or LGPLv2+ or BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: js20-bc1-9.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/ustr-1.0.4-9.1.el6.src.rpm
checksum_type: sha256
description:
   Micro string library, very low overhead from plain strdup() (Ave. 44% for
  0-20B strings). Very easy to use in existing C code. At it's simplest you can
  just include a single header file into your .c and start using it.
   This package also distributes pre-built shared libraries.


pkgId: 470f9854cdffa1e99bd42e7fd743df2ffc95d2cb9052c9b3454b3eecfcee7479
name: util-linux-ng
arch: src
version: 2.17.2
epoch: 0
release: 12.14.el6
summary: A collection of basic system utilities
url: ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng
rpm_license: GPLv1+ and GPLv2 and GPLv2+ and LGPLv2+ and MIT and BSD with advertising and Public Domain
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-017.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/util-linux-ng-2.17.2-12.14.el6.src.rpm
checksum_type: sha256
description:
  The util-linux-ng package contains a large variety of low-level system
  utilities that are necessary for a Linux system to function. Among
  others, Util-linux contains the fdisk configuration tool and the login
  program.


pkgId: 0b6c245485f012da79b059ee2dcd2851a516e559761ad075171061aa2f3b6201
name: uuid
arch: src
version: 1.6.1
epoch: 0
release: 10.el6
summary: Universally Unique Identifier library
url: http://www.ossp.org/pkg/lib/uuid/
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/uuid-1.6.1-10.el6.src.rpm
checksum_type: sha256
description:
  OSSP uuid is a ISO-C:1999 application programming interface (API)
  and corresponding command line interface (CLI) for the generation
  of DCE 1.1, ISO/IEC 11578:1996 and RFC 4122 compliant Universally
  Unique Identifier (UUID). It supports DCE 1.1 variant UUIDs of version
  1 (time and node based), version 3 (name based, MD5), version 4
  (random number based) and version 5 (name based, SHA-1). Additional
  API bindings are provided for the languages ISO-C++:1998, Perl:5 and
  PHP:4/5. Optional backward compatibility exists for the ISO-C DCE-1.1
  and Perl Data::UUID APIs.


pkgId: a4790f779f5baa7aac1b26710bd46b3df6049b15dc385466396681668a318aeb
name: valgrind
arch: src
version: 3.5.0
epoch: 1
release: 18.el6
summary: Tool for finding memory management bugs in programs
url: http://www.valgrind.org/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Debuggers
rpm_buildhost: ppc-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/valgrind-3.5.0-18.el6.src.rpm
checksum_type: sha256
description:
  Valgrind is a tool to help you find memory-management problems in your
  programs. When a program is run under Valgrind's supervision, all
  reads and writes of memory are checked, and calls to
  malloc/new/free/delete are intercepted. As a result, Valgrind can
  detect a lot of problems that are otherwise very hard to
  find/diagnose.


pkgId: 18eaefb47a8ebe616e2919db1c8c1101f0c977ea35d24eda6183093db3c66138
name: vdsm
arch: src
version: 4.9
epoch: 0
release: 63.el6
summary: Virtual Desktop Server Manager
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vdsm-4.9-63.el6.src.rpm
checksum_type: sha256
description:
  The VDSM service is required by a RHEV Manager to manage RHEV Hypervisors
  and Red Hat Enterprise Linux hosts. VDSM manages and monitors the host's
  storage, memory and networks as well as virtual machine creation, other host
  administration tasks, statistics gathering, and log collection.


pkgId: 02e483a360a70025c326417ee766863648de78c6bff4a17a5a167fc79f776945
name: velocity
arch: src
version: 1.4
epoch: 0
release: 10.7.el6
summary: Java-based template engine
url: http://velocity.apache.org/
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: x86-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/velocity-1.4-10.7.el6.src.rpm
checksum_type: sha256
description:
  Velocity is a Java-based template engine. It permits anyone to use the
  simple yet powerful template language to reference objects defined in
  Java code.
  When Velocity is used for web development, Web designers can work in
  parallel with Java programmers to develop web sites according to the
  Model-View-Controller (MVC) model, meaning that web page designers can
  focus solely on creating a site that looks good, and programmers can
  focus solely on writing top-notch code. Velocity separates Java code
  from the web pages, making the web site more maintainable over the long
  run and providing a viable alternative to Java Server Pages (JSPs) or
  PHP.
  Velocity's capabilities reach well beyond the realm of web sites; for
  example, it can generate SQL and PostScript and XML (see Anakia for more
  information on XML transformations) from templates. It can be used
  either as a standalone utility for generating source code and reports,
  or as an integrated component of other systems. Velocity also provides
  template services for the Turbine web application framework.
  Velocity+Turbine provides a template service that will allow web
  applications to be developed according to a true MVC model.


pkgId: 662a8b325ffd06a5808dbcb49e9409bacbc7a26732818017fa87c96da9f4fad0
name: vgabios
arch: src
version: 0.6b
epoch: 0
release: 3.4.el6
summary: LGPL implementation of a vga video bios
url: http://www.nongnu.org/vgabios/
rpm_license: LGPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Emulators
rpm_buildhost: x86-008.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vgabios-0.6b-3.4.el6.src.rpm
checksum_type: sha256
description:
  vgabios is an LPGL implementation of a bios for a video card.
  It is tied to plex86/bochs, althoug it will likely work on other
  emulators. It is not intended for use in real cards.


pkgId: 1db5367928952d1b3fc2513cdb8abf320361c80740be16b189a9e63bffa8fcb7
name: vhostmd
arch: src
version: 0.4
epoch: 0
release: 2.8.el6
summary: Virtualization host metrics daemon
url: http://gitorious.org/vhostmd
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vhostmd-0.4-2.8.el6.src.rpm
checksum_type: sha256
description:
  vhostmd provides a "metrics communication channel" between a host and
  its hosted virtual machines, allowing limited introspection of host
  resource usage from within virtual machines.


pkgId: 5f493c4951037f2a1bddc895c9388275305fac0e22c833b4f26009705285766b
name: vigra
arch: src
version: 1.6.0
epoch: 0
release: 2.1.el6
summary: Generic Programming for Computer Vision
url: http://kogs-www.informatik.uni-hamburg.de/~koethe/vigra/
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: js20-bc1-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vigra-1.6.0-2.1.el6.src.rpm
checksum_type: sha256
description:
  VIGRA stands for "Vision with Generic Algorithms". It's a novel computer vision
  library that puts its main emphasis on customizable algorithms and data
  structures. By using template techniques similar to those in the C++ Standard
  Template Library, you can easily adapt any VIGRA component to the needs of your
  application without thereby giving up execution speed.


pkgId: 4069ba4a64b5b8588391cab2fba712fbaf3ba745e785c35787b0739930616506
name: vim
arch: src
version: 7.2.411
epoch: 2
release: 1.4.el6
summary: The VIM editor
url: http://www.vim.org/
rpm_license: Vim and GPLv2+ and BSD and LGPLv2+ and Open Publication
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Editors
rpm_buildhost: ppc-010.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vim-7.2.411-1.4.el6.src.rpm
checksum_type: sha256
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more.


pkgId: cb39361956ffcabd7898e54cfaed9913d1644a4b839decef02030a0f291f017f
name: vinagre
arch: src
version: 2.28.1
epoch: 0
release: 11.el6
summary: VNC client for GNOME
url: http://projects.gnome.org/vinagre/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: sl6-kojislave01.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/vinagre-2.28.1-11.el6.src.rpm
checksum_type: sha256
description:
  Vinagre is a VNC client for the GNOME desktop.

  With Vinagre you can have several connections open simultaneously, bookmark
  your servers thanks to the Favorites support, store the passwords in the
  GNOME keyring, and browse the network to look for VNC servers.


pkgId: 2eece9b9605aca657d9bdec4d8600a2b83e39391ac706ebe8f344172bd983de9
name: vino
arch: src
version: 2.28.1
epoch: 0
release: 10.el6
summary: A remote desktop system for GNOME
url: http://www.gnome.org
rpm_license: GPLv2+
rpm_vendor: Scientific Linux
rpm_group: User Interface/Desktops
rpm_buildhost: sl6.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/vino-2.28.1-10.el6.src.rpm
checksum_type: sha256
description:
  Vino is a VNC server for GNOME. It allows remote users to
  connect to a running GNOME session using VNC.


pkgId: a1afdeaba87e23a6230de1abf6fe36b1e7cfe2734fc08e50a499da5eb2367b21
name: vios-proxy
arch: src
version: 0.1
epoch: 0
release: 1.el6
summary: Network proxy between a QEMU host and QEMU guests using virtioserial channels
url: http://www.redhat.com/
rpm_license: Apache License, Version 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vios-proxy-0.1-1.el6.src.rpm
checksum_type: sha256
description:
  The vios-proxy program suite creates a network tunnel between
  a server in the QEMU host and a client in a QEMU guest.
  The proxied server and client programs open normal TCP network
  ports on localhost and the vios-proxy tunnel connects them using
  QEMU virtioserial channels.


pkgId: ae54c8a22b2948434ee34b8a8aa3b8e57ccc2ad8f722da857a3854e075099604
name: vios-proxy
arch: src
version: 0.2
epoch: 0
release: 1.el6
summary: Network proxy between a QEMU host and QEMU guests using virtioserial channels
url: http://git.fedorahosted.org/git/?p=vios-proxy.git
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vios-proxy-0.2-1.el6.src.rpm
checksum_type: sha256
description:
  The vios-proxy program suite creates a network tunnel between
  a server in the QEMU host and a client in a QEMU guest.
  The proxy server and client programs open normal TCP network
  ports on localhost and the vios-proxy tunnel connects them using
  QEMU virtioserial channels.


pkgId: 4d9df803a8337e1198807fde070ce2de800c52c50587e20b08bda0690cd6f188
name: virt-manager
arch: src
version: 0.8.4
epoch: 0
release: 8.el6
summary: Virtual Machine Manager
url: http://virt-manager.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Emulators
rpm_buildhost: ls20-bc2-13.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-manager-0.8.4-8.el6.src.rpm
checksum_type: sha256
description:
  Virtual Machine Manager provides a graphical tool for administering virtual
  machines for KVM, Xen, and QEmu. Start, stop, add or remove virtual devices,
  connect to a graphical or serial console, and see resource usage statistics
  for existing VMs on local or remote machines. Uses libvirt as the backend
  management API.


pkgId: 4ccad9f195874fd420e5fd9359fe7a1fceebea69b3c527601acde7ad4c214f34
name: virt-p2v
arch: src
version: 0.8.6
epoch: 0
release: 5.20120502.1.el6
summary: Virt P2V ISO image
url: http://libguestfs.org/
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: s390-011.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-p2v-0.8.6-5.20120502.1.el6.src.rpm
checksum_type: sha256
description:
  The ISO boot image for Virt P2V booting
  from CDROM device. At the moment, this RPM just packages prebuilt ISO.

rpm_license:
  AFL and (AFL or GPLv2) and BSD and (BSD or GPLv2+) and BSD with advertising and Bitstream Vera and Boost and CC-BY and (FTL or GPLv2+) and GFDL and GPL+ and (GPL+ or Artistic) and GPLv1+ and GPLv2 and (GPLv2 or GPLv3) and (GPLv2 or Ruby) and GPLv2 with exceptions and GPLv2+ and (GPLv2+ or AFL) and (GPLv2+ or Artistic) and GPLv2+ with exceptions and GPLv3 and GPLv3+ and GPLv3+ with exceptions and IJG and ISC and JasPer and LGPLv2 and (LGPLv2 or MPLv1.1) and LGPLv2+ and (LGPLv2+ or BSD) and LGPLv2+ with exceptions and LGPLv2/GPLv2 and LGPLv3+ and MIT and (MPLv1.1 or GPLv2+ or LGPLv2+) and Open Publication and OpenLDAP and OpenSSL and Public Domain and Python and Rdisc and Redistributable, no modification permitted and Ruby and (Ruby or GPL+) and (Ruby or GPLv2) and Sleepycat and UCD and Vim and libtiff and zlib


pkgId: af176ec45af9f3e1c10d141d62f1f168ffec9efcaa508602ffe568c7656298f9
name: virt-top
arch: src
version: 1.0.4
epoch: 0
release: 3.1.el6
summary: Utility like top(1) for displaying virtualization stats
url: http://et.redhat.com/~rjones/virt-top/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-top-1.0.4-3.1.el6.src.rpm
checksum_type: sha256
description:
  virt-top is a 'top(1)'-like utility for showing stats of virtualized
  domains.  Many keys and command line options are the same as for
  ordinary 'top'.

  It uses libvirt so it is capable of showing stats across a variety of
  different virtualization systems.


pkgId: 616eb64cd8cd9938f54db701d6d9e158e064ef12ef09d7934ca60d0d85385d82
name: virt-v2v
arch: src
version: 0.6.2
epoch: 0
release: 4.el6
summary: Convert a virtual machine to run on KVM
url: http://git.fedoraproject.org/git/virt-v2v.git
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: x86-008.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-v2v-0.6.2-4.el6.src.rpm
checksum_type: sha256
description:
  virt-v2v is a tool for converting virtual machines to use the KVM hypervisor.
  It modifies both the virtual machine image and its associated libvirt metadata.
  virt-v2v will also configure a guest to use VirtIO drivers if possible.


pkgId: 3b8d8900f6a2dc19e82054a89c8b0169758d93a3e8fd7e80fbd36601c350eb79
name: virt-v2v
arch: src
version: 0.8.3
epoch: 0
release: 5.el6
summary: Convert a virtual machine to run on KVM
url: http://git.fedorahosted.org/git/virt-v2v.git
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: x86-008.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-v2v-0.8.3-5.el6.src.rpm
checksum_type: sha256
description:
  virt-v2v is a tool for converting and importing virtual machines to
  libvirt-managed KVM, or Red Hat Enterprise Virtualization. It can import a
  variety of guest operating systems from libvirt-managed hosts and VMware ESX.


pkgId: 55b288312f176cbb941d2b3b934f52fe15223c297a9a5527ad81489bf25e33ed
name: virt-viewer
arch: src
version: 0.2.1
epoch: 0
release: 2.el6
summary: Virtual Machine Viewer
url: http://virt-manager.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-010.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-viewer-0.2.1-2.el6.src.rpm
checksum_type: sha256
description:
  Virtual Machine Viewer provides a graphical console client for connecting
  to virtual machines. It uses the GTK-VNC widget to provide the display,
  and libvirt for looking up VNC server details.


pkgId: 8cdcbb8041940fc6cd42ec9983acdc3315021dd46e98019a6550d87f01d7ff11
name: virt-viewer
arch: src
version: 0.4.1
epoch: 0
release: 7.el6
summary: Virtual Machine Viewer
url: http://virt-manager.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-viewer-0.4.1-7.el6.src.rpm
checksum_type: sha256
description:
  Virtual Machine Viewer provides a graphical console client for connecting
  to virtual machines. It uses the GTK-VNC or SPICE-GTK widgets to provide
  the display, and libvirt for looking up VNC/SPICE server details.


pkgId: 7b42e3a02f78902bb108816ab1a55d3758bb26272e36aa812b3fad988b1f18d9
name: virt-what
arch: src
version: 1.11
epoch: 0
release: 1.1.el6
summary: Detect if we are running in a virtual machine
url: http://people.redhat.com/~rjones/virt-what/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Emulators
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-what-1.11-1.1.el6.src.rpm
checksum_type: sha256
description:
  virt-what is a shell script which can be used to detect if the program
  is running in a virtual machine.

  The program prints out a list of "facts" about the virtual machine,
  derived from heuristics.  One fact is printed per line.

  If nothing is printed and the script exits with code 0 (no error),
  then it can mean either that the program is running on bare-metal or
  the program is running inside a type of virtual machine which we don't
  know about or cannot detect.

  Current types of virtualization detected:

   - hyperv       Microsoft Hyper-V
   - kvm          Linux Kernel Virtual Machine (KVM)
   - openvz       OpenVZ or Virtuozzo
   - powervm_lx86 IBM PowerVM Lx86 Linux/x86 emulator
   - qemu         QEMU (unaccelerated)
   - uml          User-Mode Linux (UML)
   - virtage      Hitachi Virtualization Manager (HVM) Virtage LPAR
   - virtualbox   VirtualBox
   - virtualpc    Microsoft VirtualPC
   - vmware       VMware
   - xen          Xen
   - xen-dom0     Xen dom0 (privileged domain)
   - xen-domU     Xen domU (paravirtualized guest domain)
   - xen-hvm      Xen guest fully virtualized (HVM)


pkgId: 6df1520970ffa8be6d9267aa551b6c82f73d58b852d9d04c7ff098d07700aab7
name: virt-what
arch: src
version: 1.11
epoch: 0
release: 1.3.el6
summary: Detect if we are running in a virtual machine
url: http://people.redhat.com/~rjones/virt-what/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux
rpm_group: Applications/Emulators
rpm_buildhost: sl6.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/virt-what-1.11-1.3.el6.src.rpm
checksum_type: sha256
description:
  virt-what is a shell script which can be used to detect if the program
  is running in a virtual machine.

  The program prints out a list of "facts" about the virtual machine,
  derived from heuristics.  One fact is printed per line.

  If nothing is printed and the script exits with code 0 (no error),
  then it can mean either that the program is running on bare-metal or
  the program is running inside a type of virtual machine which we don't
  know about or can't detect.

  Current types of virtualization detected:

   - hyperv       Microsoft Hyper-V
   - kvm          Linux Kernel Virtual Machine (KVM)
   - openvz       OpenVZ or Virtuozzo
   - powervm_lx86 IBM PowerVM Lx86 Linux/x86 emulator
   - qemu         QEMU (unaccelerated)
   - uml          User-Mode Linux (UML)
   - virtage      Hitachi Virtualization Manager (HVM) Virtage LPAR
   - virtualbox   VirtualBox
   - virtualpc    Microsoft VirtualPC
   - vmware       VMware
   - xen          Xen
   - xen-dom0     Xen dom0 (privileged domain)
   - xen-domU     Xen domU (paravirtualized guest domain)
   - xen-hvm      Xen guest fully virtualized (HVM)


pkgId: e45fc44fef3c0b6236e202cb9b9224a856e29be0b3b840cd2217327314090f0d
name: virt-what
arch: src
version: 1.3
epoch: 0
release: 4.4.el6
summary: Detect if we are running in a virtual machine
url: http://people.redhat.com/~rjones/virt-what/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Emulators
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-what-1.3-4.4.el6.src.rpm
checksum_type: sha256
description:
  virt-what is a shell script which can be used to detect if the program
  is running in a virtual machine.

  The program prints out a list of "facts" about the virtual machine,
  derived from heuristics.  One fact is printed per line.

  If nothing is printed and the script exits with code 0 (no error),
  then it can mean either that the program is running on bare-metal or
  the program is running inside a type of virtual machine which we don't
  know about or cannot detect.

  Current types of virtualization detected:
  KVM, Xen, unaccelerated QEMU, VMWare, VirtualBox, VirtualPC,
  OpenVZ, Virtuozzo, User-Mode Linux (UML).


pkgId: 8499763648aa1628920e9476259cc49a1f682647eaf68df4abadfa4d4179d343
name: virt-who
arch: src
version: 0.10
epoch: 0
release: 8.el6
summary: Agent for reporting virtual guest IDs to subscription-manager
url: https://fedorahosted.org/virt-who/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/virt-who-0.10-8.el6.src.rpm
checksum_type: sha256
description:
  Agent that collects information about virtual guests present in the system and
  report them to the subscription manager.


pkgId: 16961f28323dc39d54be42b7ea01797c95d4c5da23fd20c7f16c0cec0772d714
name: vlgothic-fonts
arch: src
version: 20091202
epoch: 0
release: 2.el6
summary: Japanese TrueType font
url: http://dicey.org/vlgothic
rpm_license: mplus and BSD
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: x86-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vlgothic-fonts-20091202-2.el6.src.rpm
checksum_type: sha256
description:
  VLGothic provides Japanese TrueType fonts from the Vine Linux project.
  Most of the glyphs are taken from the M+ and Sazanami Gothic fonts,
  but some have also been improved by the project.

  This package provides the monospace VLGothic font.


pkgId: 843eeb5394553eb75241f6d1bee51c90451c320b1d3522734b24093755c67865
name: vlock
arch: src
version: 1.3
epoch: 0
release: 31.el6
summary: A program which locks one or more virtual consoles
url: http://cthulhu.c3d2.de/~toidinamai/vlock/vlock.html
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc1-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vlock-1.3-31.el6.src.rpm
checksum_type: sha256
description:
  The vlock program locks one or more sessions on the console.  Vlock
  can lock the current terminal (local or remote) or the entire virtual
  console system, which completely disables all console access.  The
  vlock program unlocks when either the password of the user who started
  vlock or the root password is typed.

  Install vlock if you need to disable access to one console or to all
  virtual consoles.


pkgId: 4acfa9bc226486b3c936db874194c94068c5aa77ab014e6549fb0edb47281829
name: volume_key
arch: src
version: 0.3.1
epoch: 0
release: 3.el6
summary: An utility for manipulating storage encryption keys and passphrases
url: https://fedorahosted.org/volume_key/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/volume_key-0.3.1-3.el6.src.rpm
checksum_type: sha256
description:
  This package provides a command-line tool for manipulating storage volume
  encryption keys and storing them separately from volumes.

  The main goal of the software is to allow restoring access to an encrypted
  hard drive if the primary user forgets the passphrase.  The encryption key
  back up can also be useful for extracting data after a hardware or software
  failure that corrupts the header of the encrypted volume, or to access the
  company data after an employee leaves abruptly.


pkgId: 1767807717ca1effaab3d6c1a71b8cd4964a82ac58e6bfd9a28f100cd60ffbb6
name: vorbis-tools
arch: src
version: 1.2.0
epoch: 1
release: 7.el6
summary: The Vorbis General Audio Compression Codec tools
url: http://www.xiph.org/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/vorbis-tools-1.2.0-7.el6.src.rpm
checksum_type: sha256
description:
  Ogg Vorbis is a fully open, non-proprietary, patent- and royalty-free,
  general-purpose compressed audio format for audio and music at fixed
  and variable bitrates from 16 to 128 kbps/channel.

  The vorbis package contains an encoder, a decoder, a playback tool, and a
  comment editor.


pkgId: 8b60aca90c0e4fb83bd7f2063b68b338914f968023916681b511ce393a70a75b
name: w3m
arch: src
version: 0.5.2
epoch: 0
release: 16.el6
summary: A pager with Web browsing abilities
url: http://w3m.sourceforge.net/
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/w3m-0.5.2-16.el6.src.rpm
checksum_type: sha256
description:
  The w3m program is a pager (or text file viewer) that can also be used
  as a text-mode Web browser. W3m features include the following: when
  reading an HTML document, you can follow links and view images using
  an external image viewer; its internet message mode determines the
  type of document from the header; if the Content-Type field of the
  document is text/html, the document is displayed as an HTML document;
  you can change a URL description like 'http://hogege.net' in plain
  text into a link to that URL.
  If you want to display the inline images on w3m, you need to install
  w3m-img package as well.


pkgId: e3b45f49af41cd5d5a72b64ad4472f3a25741749dd973fa7d47e74474dcae0a1
name: wacomcpl
arch: src
version: 0.10.0
epoch: 0
release: 3.el6
summary: Wacom driver configuration tool
url: http://people.redhat.com/~phuttere/wacomcpl/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wacomcpl-0.10.0-3.el6.src.rpm
checksum_type: sha256
description:
  wacomcpl is a graphical configuration tool for Wacom devices. It wraps the
  xsetwacom command and provides an interface to some configuration options of
  the xorg-x11-drv-wacom driver.


pkgId: 9022e57a44e3aed9e67a41b565431f76d3621ecca8e3d3fbd30be081132db9e9
name: wacomexpresskeys
arch: src
version: 0.4.2
epoch: 0
release: 3.el6
summary: Wacom ExpressKeys and Touch Strips configuration utility
url: http://expresskeys.ruivo.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wacomexpresskeys-0.4.2-3.el6.src.rpm
checksum_type: sha256
description:
  Configuration utility to bind Wacom tablet's ExpressKeys and Touch Strips to
  generate other input events.


pkgId: 861657da083066855239810528517fb1a5a283c4605f38637d49cfcd9b4347c6
name: watchdog
arch: src
version: 5.5
epoch: 0
release: 10.el6
summary: Software and/or Hardware watchdog daemon
url: http://sourceforge.net/projects/watchdog/
rpm_license: GPL+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/watchdog-5.5-10.el6.src.rpm
checksum_type: sha256
description:
  The watchdog program can be used as a powerful software watchdog daemon
  or may be alternately used with a hardware watchdog device such as the
  IPMI hardware watchdog driver interface to a resident Baseboard
  Management Controller (BMC).  watchdog periodically writes to /dev/watchdog;
  the interval between writes to /dev/watchdog is configurable through settings
  in the watchdog sysconfig file.  This configuration file is also used to
  set the watchdog to be used as a hardware watchdog instead of its default
  software watchdog operation.  In either case, if the device is open but not
  written to within the configured time period, the watchdog timer expiration
  will trigger a machine reboot. When operating as a software watchdog, the
  ability to reboot will depend on the state of the machine and interrupts.
  When operating as a hardware watchdog, the machine will experience a hard
  reset (or whatever action was configured to be taken upon watchdog timer
  expiration) initiated by the BMC.


pkgId: 9fb38d08c517b435f2a3ee398e03df14d5c9251dd6795890b5fa1f4ee6ba65a7
name: wavpack
arch: src
version: 4.60
epoch: 0
release: 1.1.el6
summary: A completely open audiocodec
url: http://www.wavpack.com/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wavpack-4.60-1.1.el6.src.rpm
checksum_type: sha256
description:
  WavPack is a completely open audio compression format providing lossless,
  high-quality lossy, and a unique hybrid compression mode. Although the
  technology is loosely based on previous versions of WavPack, the new
  version 4 format has been designed from the ground up to offer unparalleled
  performance and functionality.


pkgId: c48458305c0a31a35ebddef304d008ab53e611c8e6e6b6b35f8dfa07536b44c1
name: webalizer
arch: src
version: 2.21_02
epoch: 0
release: 3.3.el6
summary: A flexible Web server log file analysis program
url: http://www.mrunix.net/webalizer/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/webalizer-2.21_02-3.3.el6.src.rpm
checksum_type: sha256
description:
  The Webalizer is a Web server log analysis program. It is designed to
  scan Web server log files in various formats and produce usage
  statistics in HTML format for viewing through a browser. It produces
  professional looking graphs which make analyzing when and where your
  Web traffic is coming from easy.


pkgId: f0b463ecb3ce26e90d57e77c1165a691c8482f461549e3fdd761d1ce6ccc46b5
name: werken-xpath
arch: src
version: 0.9.4
epoch: 0
release: 4.beta.12.6.el6
summary: XPath implementation using JDOM
url: http://sourceforge.net/projects/werken-xpath/
rpm_license: ASL 1.1
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: btest1.z900.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/werken-xpath-0.9.4-4.beta.12.6.el6.src.rpm
checksum_type: sha256
description:
  werken.xpath is an implementation of the W3C XPath Recommendation, on
  top of the JDOM library.  It takes as input a XPath expression, and a
  JDOM tree, and returns a NodeSet (java.util.List) of selected
  elements.  Is is being used in the development of the
  as-yet-unreleased werken.xslt (eXtensible Stylesheet Language) and the
  werken.canonical (XML canonicalization) packages.


pkgId: 1b188ceca81b62e0db2d59fe03419268b983a655b9c410fe181a204f708aeb62
name: wget
arch: src
version: 1.12
epoch: 0
release: 1.11.el6_5
summary: A utility for retrieving files using the HTTP or FTP protocols
url: http://www.gnu.org/software/wget/
rpm_license: GPLv3+ and GFDL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-018.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wget-1.12-1.11.el6_5.src.rpm
checksum_type: sha256
description:
  GNU Wget is a file retrieval utility which can use either the HTTP or
  FTP protocols. Wget features include the ability to work in the
  background while you are logged out, recursive retrieval of
  directories, file name wildcard matching, remote file timestamp
  storage and comparison, use of Rest with FTP servers and Range with
  HTTP servers to retrieve files over slow or unstable connections,
  support for Proxy servers, and configurability.


pkgId: 1c49e797c9ac13129a08c544bf0d51cf095b69a57763e9957121a43f7ae229ea
name: which
arch: src
version: 2.19
epoch: 0
release: 5.1.el6
summary: Displays where a particular program in your path is located
url: http://www.xs4all.nl/~carlo17/which/
rpm_license: GPLv3
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/which-2.19-5.1.el6.src.rpm
checksum_type: sha256
description:
  The which command shows the full pathname of a specified program, if
  the specified program is in your PATH.


pkgId: fd922d40d3e84aeffa7631a2d8e27f7b71576ce7b10fd84bc3c62a11165a69e4
name: wireless-tools
arch: src
version: 29
epoch: 1
release: 5.1.1.el6
summary: Wireless ethernet configuration tools
url: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
rpm_license: GPL+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: js20-bc1-9.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wireless-tools-29-5.1.1.el6.src.rpm
checksum_type: sha256
description:
  This package contain the Wireless tools, used to manipulate
  the Wireless Extensions. The Wireless Extension is an interface
  allowing you to set Wireless LAN specific parameters and get the
  specific stats for wireless networking equipment.


pkgId: 2f3d9462b343112ca3953fb744bd842415293bd23247525426ca309046836be7
name: wireshark
arch: src
version: 1.2.10
epoch: 0
release: 2.el6
summary: Network traffic analyzer
url: http://www.wireshark.org/
rpm_license: GPL+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-012.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wireshark-1.2.10-2.el6.src.rpm
checksum_type: sha256
description:
  Wireshark is a network traffic analyzer for Unix-ish operating systems.

  This package lays base for libpcap, a packet capture and filtering
  library, contains command-line utilities, contains plugins and
  documentation for wireshark. A graphical user interface is packaged
  separately to GTK+ package.


pkgId: 81cb54f1af1160face8a8fde403359cf45f0479658cfa402822022fa12edcc80
name: wordnet
arch: src
version: 3.0
epoch: 0
release: 13.el6
summary: A lexical database for the English language
url: http://wordnet.princeton.edu
rpm_license: MIT and GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Text
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wordnet-3.0-13.el6.src.rpm
checksum_type: sha256
description:
  WordNet is a large lexical database of English, developed under the direction
  of George A. Miller. Nouns, verbs, adjectives and adverbs are grouped into sets
  of cognitive synonyms (synsets), each expressing a distinct concept. Synsets
  are interlinked by means of conceptual-semantic and lexical relations. The
  resulting network of meaningfully related words and concepts can be navigated
  with the browser. WordNet is also freely and publicly available for download.
  WordNet's structure makes it a useful tool for computational linguistics and
  natural language processing.


pkgId: 402358537fe14df3f1ff0a45a6680ff37f3dfa56c21067be37c701aedf010e94
name: words
arch: src
version: 3.0
epoch: 0
release: 17.el6
summary: A dictionary of English words for the /usr/share/dict directory
url: http://en.wikipedia.org/wiki/Moby_Project
rpm_license: Public Domain
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/words-3.0-17.el6.src.rpm
checksum_type: sha256
description:
  The words file is a dictionary of English words for the
  /usr/share/dict directory. Some programs use this database of
  words to check spelling. Password checkers use it to look for bad
  passwords.


pkgId: cb1e0e8999417926354b897e4d377faac1cbb50942b132c03453531331fb89e2
name: wpa_supplicant
arch: src
version: 0.6.8
epoch: 1
release: 10.el6
summary: WPA/WPA2/IEEE 802.1X Supplicant
url: http://w1.fi/wpa_supplicant/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-012.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wpa_supplicant-0.6.8-10.el6.src.rpm
checksum_type: sha256
description:
  wpa_supplicant is a WPA Supplicant for Linux, BSD and Windows with support
  for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA
  component that is used in the client stations. It implements key negotiation
  with a WPA Authenticator and it controls the roaming and IEEE 802.11
  authentication/association of the wlan driver.


pkgId: e4bd33bc25838ccba204c4ec094006a68936419c608e98dc2ebc0b046b36fba1
name: wqy-zenhei-fonts
arch: src
version: 0.9.45
epoch: 0
release: 3.el6
summary: WenQuanYi Zen Hei CJK Font
url: http://wenq.org/enindex.cgi
rpm_license: GPLv2 with exceptions
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: x86-008.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wqy-zenhei-fonts-0.9.45-3.el6.src.rpm
checksum_type: sha256
description:
  WenQuanYi Zen Hei is a Hei-Ti style (sans-serif type) Chinese
  outline font. It is designed for general purpose text formatting
  and on-screen display of Chinese characters and symbols from
  many other languages. The embolden strokes of the font glyphs
  produces enhanced screen contrast, making it easier to read
  recognize. The embedded bitmap glyphs further enhance on-screen
  performance, which can be enabled with the provided configuration
  files. WenQuanYi Zen Hei provides a rather complete coverage to
  Chinese Hanzi glyphs, including both simplified and traditional
  forms. The total glyph number in this font is over 35,000, including
  over 21,000 Chinese Hanzi. This font has full coverage to GBK(CP936)
  charset, CJK Unified Ideographs, as well as the code-points
  needed for zh_cn, zh_sg, zh_tw, zh_hk, zh_mo, ja (Japanese)
  and ko (Korean) locales for fontconfig. Starting from version
  0.8, this font package has contained two font families, i.e.
  the proportionally-spaced Zen Hei, and a mono-spaced face
  named "WenQuanYi Zen Hei Mono".


pkgId: 812dea417c18d129d4c4e5c3820cd164c7c71832884d5f8d4128f32392bdc435
name: ws-jaxme
arch: src
version: 0.5.1
epoch: 0
release: 4.6.el6
summary: Open source implementation of JAXB
url: http://ws.apache.org/jaxme/
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/ws-jaxme-0.5.1-4.6.el6.src.rpm
checksum_type: sha256
description:
  A Java/XML binding compiler takes as input a schema
  description (in most cases an XML schema, but it may
  be a DTD, a RelaxNG schema, a Java class inspected
  via reflection, or a database schema). The output is
  a set of Java classes:
  * A Java bean class matching the schema description.
    (If the schema was obtained via Java reflection,
    the original Java bean class.)
  * Read a conforming XML document and convert it into
    the equivalent Java bean.
  * Vice versa, marshal the Java bean back into the
    original XML document.


pkgId: 9d0ff2d6d2285a8239dd5ac2383c871b35017f7cc718c95fb35712b4ea36e286
name: wsdl4j
arch: src
version: 1.5.2
epoch: 0
release: 7.8.el6
summary: Web Services Description Language Toolkit for Java
url: http://sourceforge.net/projects/wsdl4j
rpm_license: CPL
rpm_vendor: Red Hat, Inc.
rpm_group: Text Processing/Markup/XML
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wsdl4j-1.5.2-7.8.el6.src.rpm
checksum_type: sha256
description:
  The Web Services Description Language for Java Toolkit (WSDL4J) allows the
  creation, representation, and manipulation of WSDL documents describing
  services.  This codebase will eventually serve as a reference implementation
  of the standard created by JSR110.


pkgId: 1b1e73fa4446e6a3460a7d5e8b268dca4a5224f9544731486386ab4a92107de0
name: wvdial
arch: src
version: 1.60
epoch: 0
release: 12.el6
summary: A heuristic autodialer for PPP connections
url: http://alumnit.ca/wiki/?WvDial
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/wvdial-1.60-12.el6.src.rpm
checksum_type: sha256
description:
  WvDial automatically locates and configures modems and can log into
  almost any ISP's server without special configuration. You need to
  input the username, password, and phone number, and then WvDial will
  negotiate the PPP connection using any mechanism needed.


pkgId: b7ac887b0dac453f281e26ad74ecfa168010d2d292792150cfa0436a581016ce
name: x3270
arch: src
version: 3.3.15
epoch: 0
release: 2.el6
summary: An X Window System based IBM 3278/3279 terminal emulator
url: http://www.geocities.com/SiliconValley/Peaks/7814
rpm_license: MIT
rpm_vendor: Scientific Linux
rpm_group: Applications/Internet
rpm_buildhost: sl6-kojislave01.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/x3270-3.3.15-2.el6.src.rpm
checksum_type: sha256
description:
  The x3270 package contains files needed for emulating the IBM 3278/3279
  terminals, commonly used with mainframe applications.

  You will also need to install a frontend for x3270. Available frontends
  are x3270-x11 (for the X Window System) and x3270-text (for text mode).


pkgId: a397fcf499bb2a9e13ee83ac4018268bb795ee1a1688e4a1563b2407a058933a
name: x86info
arch: src
version: 1.25
epoch: 1
release: 1.32.el6
summary: x86 processor information tool.
url: http://www.codemonkey.org.uk/projects/x86info
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: x86-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/x86info-1.25-1.32.el6.src.rpm
checksum_type: sha256
description:
  x86info displays diagnostic information about x86 processors, such
  as cache configuration and supported features.


pkgId: d8762a623c0cbdafbf3178bd3356ab95c2e95fccabe04085a2ac9a0879f9c5ce
name: xalan-j2
arch: src
version: 2.7.0
epoch: 0
release: 9.8.el6
summary: Java XSLT processor
url: http://xalan.apache.org/
rpm_license: ASL 1.1 and ASL 2.0 and W3C
rpm_vendor: Red Hat, Inc.
rpm_group: Text Processing/Markup/XML
rpm_buildhost: s390-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xalan-j2-2.7.0-9.8.el6.src.rpm
checksum_type: sha256
description:
  Xalan is an XSLT processor for transforming XML documents into HTML,
  text, or other XML document types. It implements the W3C Recommendations
  for XSL Transformations (XSLT) and the XML Path Language (XPath). It can
  be used from the command line, in an applet or a servlet, or as a module
  in other program.


pkgId: 87ce1cd8560216f40fc7fcfdc1d642eca2c292d6c98dbb7cfbba8e797159c0ca
name: xcb-proto
arch: src
version: 1.11
epoch: 0
release: 1.el6
summary: XCB protocol descriptions
url: http://xcb.freedesktop.org/
rpm_license: MIT
rpm_vendor: Scientific Linux
rpm_group: Development/Libraries
rpm_buildhost: sl6.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/xcb-proto-1.11-1.el6.src.rpm
checksum_type: sha256
description:
  XCB is a project to enable efficient language bindings to the X11 protocol.
  This package contains the protocol descriptions themselves.  Language
  bindings use these protocol descriptions to generate code for marshalling
  the protocol.


pkgId: a69329b83573bdcdf3a2e1024ac58dafcec7c9708e3f59525019cf1f5c90769a
name: xcb-util
arch: src
version: 0.3.6
epoch: 0
release: 1.el6
summary: Convenience libraries sitting on top of libxcb
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xcb-util-0.3.6-1.el6.src.rpm
checksum_type: sha256
description:
  The xcb-util module provides a number of libraries which sit on top of
  libxcb, the core X protocol library, and some of the extension
  libraries. These experimental libraries provide convenience functions
  and interfaces which make the raw X protocol more usable. Some of the
  libraries also provide client-side code which is not strictly part of
  the X protocol but which have traditionally been provided by Xlib.


pkgId: 3aec85d9fcdb349838a18e55170f04c597b7117f76f5cf5c90e900a5ec1ec337
name: xcb-util-image
arch: src
version: 0.3.9
epoch: 0
release: 4.el6
summary: Port of Xlib's XImage and XShmImage functions on top of libxcb
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-019.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xcb-util-image-0.3.9-4.el6.src.rpm
checksum_type: sha256
description:
  XCB util-image module provides the following library:

    - image: Port of Xlib's XImage and XShmImage functions.


pkgId: 94f2b2a1a915b0b96e7f33850ec53910646568535dc56bb9bb6d3058c87ceaea
name: xcb-util-keysyms
arch: src
version: 0.3.9
epoch: 0
release: 5.el6
summary: Standard X key constants and keycodes conversion on top of libxcb
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xcb-util-keysyms-0.3.9-5.el6.src.rpm
checksum_type: sha256
description:
  XCB util-keysyms module provides the following library:

    - keysyms: Standard X key constants and conversion to/from keycodes.


pkgId: b4d59566048338d099e747c22addce5450c791d6e1765ea95f3f7e20558c1881
name: xcb-util-renderutil
arch: src
version: 0.3.9
epoch: 0
release: 3.el6
summary: Convenience functions for the Render extension
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_vendor: Scientific Linux
rpm_group: System Environment/Libraries
rpm_buildhost: sl6-kojislave01.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/xcb-util-renderutil-0.3.9-3.el6.src.rpm
checksum_type: sha256
description:
  XCB util-renderutil module provides the following library:

    - renderutil: Convenience functions for the Render extension.


pkgId: 99bb587bfc7a6e419bd5081aae12edf60de007ddd30d9b43bb147b29592ae83a
name: xcb-util-wm
arch: src
version: 0.3.9
epoch: 0
release: 5.el6
summary: Client and window-manager helper library on top of libxcb
url: http://xcb.freedesktop.org
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xcb-util-wm-0.3.9-5.el6.src.rpm
checksum_type: sha256
description:
  XCB util-wm module provides the following libraries:

    - ewmh: Both client and window-manager helpers for EWMH.
    - icccm: Both client and window-manager helpers for ICCCM.


pkgId: eb1930678a18f31e8707e34ee2c87a11e92572cc539b0895531c1eeb294eb989
name: xchat
arch: src
version: 2.8.8
epoch: 1
release: 1.el6
summary: A popular and easy to use graphical IRC (chat) client
url: http://www.xchat.org
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-010.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xchat-2.8.8-1.el6.src.rpm
checksum_type: sha256
description:
  X-Chat is an easy to use graphical IRC chat client for the X Window System.
  It allows you to join multiple IRC channels (chat rooms) at the same time,
  talk publicly, private one-on-one conversations etc. Even file transfers
  are possible.

  This includes the plugins to run the Perl and Python scripts.


pkgId: aa1f12fc1912ba00d39f71c1273fb95571da1b53e5721dd7ab0018967128c7cb
name: xdelta
arch: src
version: 1.1.4
epoch: 0
release: 8.el6
summary: A binary file delta generator and an RCS replacement library
url: http://xdelta.org/
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: js20-bc1-9.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xdelta-1.1.4-8.el6.src.rpm
checksum_type: sha256
description:
  Xdelta (X for XCF: the eXperimental Computing Facility at Berkeley) is
  a binary delta generator (like a diff program for binaries) and an RCS
  version control replacement library. The Xdelta library performs its
  work independently of the actual format used to encode the file and is
  intended to be used by various higher-level programs such as XCF's
  Project Revision Control System (PRCS).  PRCS is a front end for a
  version control toolset.  Xdelta uses a binary file delta algorithm to
  replace the standard diff program used by RCS


pkgId: b19da102ae33d8bea43270e0b496a138782e34d9f2d398d838d5f352cc845cce
name: xdg-user-dirs
arch: src
version: 0.12
epoch: 0
release: 4.el6
summary: Handles user special directories
url: http://freedesktop.org/wiki/Software/xdg-user-dirs
rpm_license: GPLv2+ and MIT
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: ppc-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xdg-user-dirs-0.12-4.el6.src.rpm
checksum_type: sha256
description:
  Contains xdg-user-dirs-update that updates folders in a users
  home directory based on the defaults configured by the administrator.


pkgId: d91e0f0638fcaa76931c221c1e4fbc5f357995b9ad2bd775a6d328cbbb8d3c06
name: xdg-user-dirs-gtk
arch: src
version: 0.8
epoch: 0
release: 7.el6
summary: Gnome integration of special directories
url: http://freedesktop.org/wiki/Software/xdg-user-dirs
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xdg-user-dirs-gtk-0.8-7.el6.src.rpm
checksum_type: sha256
description:
  Contains some integration of xdg-user-dirs with the gnome
  desktop, including creating default bookmarks and detecting
  locale changes.


pkgId: 0bc17e41d7bb7cb893bc314fb8e2d37e8c6e9c5efe5e6771450d2eb3d7fed03f
name: xdg-utils
arch: src
version: 1.0.2
epoch: 0
release: 15.20091016cvs.el6
summary: Basic desktop integration functions
url: http://portland.freedesktop.org/
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xdg-utils-1.0.2-15.20091016cvs.el6.src.rpm
checksum_type: sha256
description:
  The xdg-utils package is a set of simple scripts that provide basic
  desktop integration functions for any Free Desktop, such as Linux.
  They are intended to provide a set of defacto standards.
  This means that:
  *  Third party software developers can rely on these xdg-utils
     for all of their simple integration needs.
  *  Developers of desktop environments can make sure that their
     environments are well supported
  *  Distribution vendors can provide custom versions of these utilities

  The following scripts are provided at this time:
  * xdg-desktop-menu      Install desktop menu items
  * xdg-desktop-icon      Install icons to the desktop
  * xdg-icon-resource     Install icon resources
  * xdg-mime              Query information about file type handling and
                          install descriptions for new file types
  * xdg-open              Open a file or URL in the user's preferred application
  * xdg-email             Send mail using the user's preferred e-mail composer
  * xdg-screensaver       Control the screensaver


pkgId: d622529965e0ac4aca55a36d3d33ef86ea5af5667dda49c76e143a0b6a65d7a5
name: xdvipdfmx
arch: src
version: 0.4
epoch: 0
release: 5.1.el6
summary: An extended version of DVIPDFMx with support for XeTeX output
url: http://scripts.sil.org/xetex_linux
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xdvipdfmx-0.4-5.1.el6.src.rpm
checksum_type: sha256
description:
  xdvipdfmx is an output driver for the XeTeX typesetting system.
  It is an extended version of DVIPDFMx by Jin-Hwan Cho and Shunsaku Hirata,
  which is itself an extended version of dvipdfm by Mark A. Wicks.
  This driver converts XDV (extended DVI) output from the xetex program
  into standard PDF that can be viewed or printed.


pkgId: 41e575832f2aff24415a157704257600f4cb9a178f57813a699631698f481e4a
name: xerces-c
arch: src
version: 3.0.1
epoch: 0
release: 20.el6
summary: Validating XML Parser
url: http://xml.apache.org/xerces-c/
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: js20-bc2-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xerces-c-3.0.1-20.el6.src.rpm
checksum_type: sha256
description:
  Xerces-C is a validating XML parser written in a portable
  subset of C++. Xerces-C makes it easy to give your application the
  ability to read and write XML data. A shared library is provided for
  parsing, generating, manipulating, and validating XML
  documents. Xerces-C is faithful to the XML 1.0 recommendation and
  associated standards: XML 1.0 (Third Edition), XML 1.1 (First
  Edition), DOM Level 1, 2, 3 Core, DOM Level 2.0 Traversal and Range,
  DOM Level 3.0 Load and Save, SAX 1.0 and SAX 2.0, Namespaces in XML,
  Namespaces in XML 1.1, XML Schema, XML Inclusions).


pkgId: 5ba01e095a2d4319fae9860a3ee8dd012a152512a904487c83bae769fb599bd1
name: xerces-j2
arch: src
version: 2.7.1
epoch: 0
release: 12.5.el6
summary: Java XML parser
url: http://xerces.apache.org/
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: Text Processing/Markup/XML
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xerces-j2-2.7.1-12.5.el6.src.rpm
checksum_type: sha256
description:
  Welcome to the future! Xerces2 is the next generation of high
  performance, fully compliant XML parsers in the Apache Xerces family.
  This new version of Xerces introduces the Xerces Native Interface (XNI),
  a complete framework for building parser components and configurations
  that is extremely modular and easy to program.

  The Apache Xerces2 parser is the reference implementation of XNI but
  other parser components, configurations, and parsers can be written
  using the Xerces Native Interface. For complete design and
  implementation documents, refer to the XNI Manual.

  Xerces 2 is a fully conforming XML Schema processor. For more
  information, refer to the XML Schema page.

  Xerces 2 also provides a partial implementation of Document Object Model
  Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
  Drafts. For more information, refer to the DOM Level 3 Implementation
  page.


pkgId: 0b9a728b03bbdba60f5f842fbdb3598f599a8026860fe0655b7997f64a93fe2c
name: xfig
arch: src
version: 3.2.5
epoch: 0
release: 22.a.1.el6
summary: An X Window System tool for drawing basic vector graphics
url: http://www.xfig.org/
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xfig-3.2.5-22.a.1.el6.src.rpm
checksum_type: sha256
description:
  Xfig is an X Window System tool for creating basic vector graphics,
  including bezier curves, lines, rulers and more.  The resulting
  graphics can be saved, printed on PostScript printers or converted to
  a variety of other formats (e.g., X11 bitmaps, Encapsulated
  PostScript, LaTeX).

  You should install xfig if you need a simple program to create vector
  graphics.


pkgId: c6e844542a40f3447a7628ba662df58c745bee9e6c7ecce0b6a2e857bf7ddadf
name: xfsdump
arch: src
version: 3.0.4
epoch: 0
release: 2.el6
summary: Administrative utilities for the XFS filesystem
url: http://oss.sgi.com/projects/xfs/
rpm_license: GPL+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xfsdump-3.0.4-2.el6.src.rpm
checksum_type: sha256
description:
  The xfsdump package contains xfsdump, xfsrestore and a number of
  other utilities for administering XFS filesystems.

  xfsdump examines files in a filesystem, determines which need to be
  backed up, and copies those files to a specified disk, tape or other
  storage medium.	 It uses XFS-specific directives for optimizing the
  dump of an XFS filesystem, and also knows how to backup XFS extended
  attributes.  Backups created with xfsdump are "endian safe" and can
  thus be transfered between Linux machines of different architectures
  and also between IRIX machines.

  xfsrestore performs the inverse function of xfsdump; it can restore a
  full backup of a filesystem.  Subsequent incremental backups can then
  be layered on top of the full backup.  Single files and directory
  subtrees may be restored from full or partial backups.


pkgId: f8f2af873eb46b1903fb1a676b9748c1785ad0f042e2eeed290626dc73cc0181
name: xfsprogs
arch: src
version: 3.1.1
epoch: 0
release: 10.el6
summary: Utilities for managing the XFS filesystem
url: http://oss.sgi.com/projects/xfs/
rpm_license: GPL+ and LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xfsprogs-3.1.1-10.el6.src.rpm
checksum_type: sha256
description:
  A set of commands to use the XFS filesystem, including mkfs.xfs.

  XFS is a high performance journaling filesystem which originated
  on the SGI IRIX platform.  It is completely multi-threaded, can
  support large files and large filesystems, extended attributes,
  variable block sizes, is extent based, and makes extensive use of
  Btrees (directories, extents, free space) to aid both performance
  and scalability.

  Refer to the documentation at http://oss.sgi.com/projects/xfs/
  for complete details.  This implementation is on-disk compatible
  with the IRIX version of XFS.


pkgId: bd6cbf06416c0e8d6054ea92ec7d45f5d8ce65867e0ea9056872530122d20bf0
name: xguest
arch: src
version: 1.0.8
epoch: 0
release: 6.el6
summary: Creates xguest user as a locked down user
url: http://people.fedoraproject.org/~dwalsh/xguest/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xguest-1.0.8-6.el6.src.rpm
checksum_type: sha256
description:
  Installing this package sets up the xguest user to be used as a temporary
  account to switch to or as a kiosk user account. The account is disabled unless
  SELinux is in enforcing mode. The user is only allowed to log in via gdm.
  The home and temporary directories of the user will be polyinstantiated and
  mounted on tmpfs.


pkgId: 8b3d303e02d926a2c464b327d21153e1061baf013fb440e3707a33e345e1548b
name: xhtml1-dtds
arch: src
version: 1.0
epoch: 0
release: 20020801.7
summary: XHTML 1.0 document type definitions
url: http://www.w3.org/TR/2002/REC-xhtml1-20020801/
rpm_license: W3C
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Text
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xhtml1-dtds-1.0-20020801.7.src.rpm
checksum_type: sha256
description:
  This provides the DTDs of the Second Edition of XHTML 1.0, a reformulation
  of HTML 4 as an XML 1.0 application, and three DTDs corresponding to the
  ones defined by HTML 4. The semantics of the elements and their attributes
  are defined in the W3C Recommendation for HTML 4. These semantics provide
  the foundation for future extensibility of XHTML.


pkgId: 83afa098eb546a584d61791727ceeb4f7762009e703f315e94fa4f8b0f5743ee
name: xhtml2fo-style-xsl
arch: src
version: 20051222
epoch: 0
release: 4.1.el6
summary: Antenna House, Inc. XHTML to XSL:FO stylesheets
url: http://www.antennahouse.com/XSLsample/XSLsample.htm
rpm_license: Copyright only
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Text
rpm_buildhost: spark.z900.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xhtml2fo-style-xsl-20051222-4.1.el6.src.rpm
checksum_type: sha256
description:
  These XSL stylesheets allow you to transform any XHTML document to FO.
  With a XSL:FO processor you could create PDF versions of XHTML documents.


pkgId: e33fbd5997560df45d6aed0ef82661eb9af6101c975f72bee34ed3c73e6932dc
name: xinetd
arch: src
version: 2.3.14
epoch: 2
release: 29.el6
summary: A secure replacement for inetd
url: http://www.xinetd.org
rpm_license: xinetd
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xinetd-2.3.14-29.el6.src.rpm
checksum_type: sha256
description:
  Xinetd is a secure replacement for inetd, the Internet services
  daemon. Xinetd provides access control for all services based on the
  address of the remote host and/or on time of access and can prevent
  denial-of-access attacks. Xinetd provides extensive logging, has no
  limit on the number of server arguments, and lets you bind specific
  services to specific IP addresses on your host machine. Each service
  has its own specific configuration file for Xinetd; the files are
  located in the /etc/xinetd.d directory.


pkgId: 0998da8489a53009bbd0b85302f9c291d16151fe39d2675d6d57720f14b9cece
name: xjavadoc
arch: src
version: 1.1
epoch: 0
release: 7.7.el6
summary: The XJavaDoc engine
url: http://xdoclet.sourceforge.net/xjavadoc/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Testing
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xjavadoc-1.1-7.7.el6.src.rpm
checksum_type: sha256
description:
  The XJavaDoc engine is a complete rewrite of Sun's
  JavaDoc engine that is faster and more suited for
  XDoclet (although it is completely standalone). It
  scans java source code and makes information about
  a class available via special java beans that are
  part of the XJavaDoc core. These beans provide the
  same information about a class as Sun's JavaDoc API,
  and some nice extra features.


pkgId: 2898dff0b4cd23299749a1af7eedc8ffde538b72f0a1d5009fcb4eaf8fb78de8
name: xkeyboard-config
arch: src
version: 1.6
epoch: 0
release: 7.el6
summary: X Keyboard Extension configuration data
url: http://www.freedesktop.org/wiki/Software/XKeyboardConfig
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: s390-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xkeyboard-config-1.6-7.el6.src.rpm
checksum_type: sha256
description:
  This package contains configuration data used by the X Keyboard Extension
  (XKB), which allows selection of keyboard layouts when using a graphical
  interface.


pkgId: bf2ecfe7c5729165975713dd70e0b8e83c31897b84a1ad08daa13349b9a0bc53
name: xml-commons-apis
arch: src
version: 1.3.04
epoch: 0
release: 3.6.el6
summary: APIs for DOM, SAX, and JAXP
url: http://xml.apache.org/commons/
rpm_license: ASL 2.0 and W3C and Public Domain
rpm_vendor: Scientific Linux
rpm_group: Text Processing/Markup/XML
rpm_buildhost: sl6.fnal.gov
rpm_packager: Scientific Linux
location_href: vendor/xml-commons-apis-1.3.04-3.6.el6.src.rpm
checksum_type: sha256
description:
  xml-commons-apis is designed to organize and have common packaging for
  the various externally-defined standard interfaces for XML. This
  includes the DOM, SAX, and JAXP.


pkgId: 77995e7ff9486c2d7208033c69394e87f62fa783819be15dda8084f58a61d403
name: xmldb-api
arch: src
version: 0.1
epoch: 1
release: 0.4.20011111cvs.1.5.el6
summary: XML:DB API for Java
url: http://xmldb-org.sourceforge.net
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Java
rpm_buildhost: s390-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xmldb-api-0.1-0.4.20011111cvs.1.5.el6.src.rpm
checksum_type: sha256
description:
  The API interfaces are what driver developers must implement when creating a
  new driver and are the interfaces that applications are developed against.
  Along with the interfaces a concrete DriverManager implementation is also
  provides.


pkgId: 7354a9d6057aa49a85f15ca51fe3c0ed80556c173179eeef1decf3acd23c4cef
name: xmlgraphics-commons
arch: src
version: 1.3.1
epoch: 0
release: 1.1.el6
summary: XML Graphics Commons
url: http://xmlgraphics.apache.org/
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-5.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xmlgraphics-commons-1.3.1-1.1.el6.src.rpm
checksum_type: sha256
description:
  Apache XML Graphics Commons is a library that consists of
  several reusable components used by Apache Batik and
  Apache FOP. Many of these components can easily be used
  separately outside the domains of SVG and XSL-FO. You will
  find components such as a PDF library, an RTF library,
  Graphics2D implementations that let you generate PDF &
  PostScript files, and much more.


pkgId: 673d2eced295471e472f810f0fdfcae93fb7c846ee13d2cfe30773b71996071b
name: xmlrpc-c
arch: src
version: 1.16.24
epoch: 0
release: 1200.1840.el6
summary: A lightweight RPC library based on XML and HTTP
url: http://xmlrpc-c.sourceforge.net/
rpm_license: BSD and MIT
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xmlrpc-c-1.16.24-1200.1840.el6.src.rpm
checksum_type: sha256
description:
  XML-RPC is a quick-and-easy way to make procedure calls over the
  Internet. It converts the procedure call into XML document, sends it
  to a remote server using HTTP, and gets back the response as XML.

  This library provides a modular implementation of XML-RPC for C.


pkgId: d408d1bf3c0ef20a7a08b9c90aa0f0ef92d177ddfe3fb57f2d03bc0b39cf3d87
name: xmlrpc3
arch: src
version: 3.0
epoch: 0
release: 4.15.el6
summary: Java XML-RPC implementation
url: http://ws.apache.org/xmlrpc/
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xmlrpc3-3.0-4.15.el6.src.rpm
checksum_type: sha256
description:
  Apache XML-RPC is a Java implementation of XML-RPC, a popular protocol
  that uses XML over HTTP to implement remote procedure calls.
  Apache XML-RPC was previously known as Helma XML-RPC. If you have code
  using the Helma library, all you should have to do is change the import
  statements in your code from helma.xmlrpc.* to org.apache.xmlrpc.*.


pkgId: c7e1239f609b91e15e7aff8e969b504fbf7792978714eb8d395e1b5065e47f18
name: xmlsec1
arch: src
version: 1.2.20
epoch: 0
release: 4.el6
summary: Library providing support for "XML Signature" and "XML Encryption" standards
url: http://www.aleksey.com/xmlsec/
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-018.build.eng.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xmlsec1-1.2.20-4.el6.src.rpm
checksum_type: sha256
description:
  XML Security Library is a C library based on LibXML2  and OpenSSL.
  The library was created with a goal to support major XML security
  standards "XML Digital Signature" and "XML Encryption".


pkgId: 5cbf51f922d0edef65e42834aa35d90382f2ab9a113e8f2f2c02fa01972941f1
name: xmltoman
arch: src
version: 0.4
epoch: 0
release: 4.el6
summary: Scripts for converting XML to roff or HTML
url: http://sourceforge.net/projects/xmltoman/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xmltoman-0.4-4.el6.src.rpm
checksum_type: sha256
description:
  This package provides xmltoman and xmlmantohtml scripts, to compile
  the xml representation of manual page to either roff source, or HTML
  (while providing the CSS stylesheet for eye-candy look). XSL stylesheet
  for doing rougly the same job is provided.


pkgId: fc68615635e95375d03ed50d409e114f331ed6b645be5920d82eacae2b7a50e5
name: xorg-x11-drivers
arch: src
version: 7.3
epoch: 0
release: 13.2.el6
summary: X.Org X11 driver installation package
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X Hardware Support
rpm_buildhost: js20-bc1-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xorg-x11-drivers-7.3-13.2.el6.src.rpm
checksum_type: sha256
description:
  The purpose of this package is to require all of the individual X.Org
  driver rpms, to allow the OS installation software to install all drivers
  all at once, without having to track which individual drivers are present
  on each architecture.  By installing this package, it forces all of the
  individual driver packages to be installed.


pkgId: efe5fc6ebd327b2a0bd4c4d5bbb9752a2541c06cff4743d8fc3d21868eecbb28
name: xorg-x11-drv-qxl
arch: src
version: 0.0.12
epoch: 0
release: 9.el6
summary: Xorg X11 qxl video driver
url: http://www.x.org
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X Hardware Support
rpm_buildhost: x86-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xorg-x11-drv-qxl-0.0.12-9.el6.src.rpm
checksum_type: sha256
description:
  xorg-x11-qxl-drv is an X11 video driver for the QEMU QXL video
  accelerator. This driver makes it possible to use Red Hat Enterprise
  Linux 6 as a guest operating system under KVM and QEMU, using the
  SPICE protocol.


pkgId: 64087e5de87c4a92dafa2da17471447cd3a44ed78575411ed9007893e0e2b8f8
name: xorg-x11-drv-synaptics
arch: src
version: 1.2.1
epoch: 0
release: 5.el6
summary: Xorg X11 Synaptics touchpad input driver
url: http://www.x.org
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X Hardware Support
rpm_buildhost: ppc-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xorg-x11-drv-synaptics-1.2.1-5.el6.src.rpm
checksum_type: sha256
description:
  This is the Synaptics touchpad driver for the X.Org X server. The following
  touchpad models are supported:
  * Synaptics
  * appletouch (Post February 2005 and October 2005 Apple Aluminium Powerbooks)
  * Elantech (EeePC)
  * bcm5974 (Macbook Air (Jan 2008), Macbook Pro Penryn (Feb 2008), iPhone
    (2007), iPod Touch (2008)

  Note that support for appletouch, elantech and bcm5974 requires the respective
  kernel module.

  A touchpad by default operates in compatibility mode by emulating a standard
  mouse. However, by using a dedicated driver, more advanced features of the
  touchpad become available.

  Features:

      * Movement with adjustable, non-linear acceleration and speed.
      * Button events through short touching of the touchpad ("tapping").
      * Double-Button events through double short touching of the touchpad.
      * Dragging through short touching and holding down the finger on the
        touchpad.
      * Middle and right button events on the upper and lower corner of the
        touchpad.
      * Vertical scrolling (button four and five events) through moving the
        finger on the right side of the touchpad.
      * The up/down button sends button four/five events.
      * Horizontal scrolling (button six and seven events) through moving the
        finger on the lower side of the touchpad.
      * The multi-buttons send button four/five events, and six/seven events for
        horizontal scrolling.
      * Adjustable finger detection.
        Multifinger taps: two finger for middle button and three finger for
        right button events. (Needs hardware support. Not all models implement
        this feature.)
      * Run-time configuration using shared memory. This means you can change
        parameter settings without restarting the X server.


pkgId: 1b1115dcd71ee7fe45aca11d346ac8d949e09f723a1e59607343429f342ce78f
name: xorg-x11-drv-synaptics
arch: src
version: 1.6.2
epoch: 0
release: 11.el6
summary: Xorg X11 Synaptics touchpad input driver
url: http://www.x.org
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X Hardware Support
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xorg-x11-drv-synaptics-1.6.2-11.el6.src.rpm
checksum_type: sha256
description:
  This is the Synaptics touchpad driver for the X.Org X server. The following
  touchpad models are supported:
  * Synaptics
  * appletouch (Post February 2005 and October 2005 Apple Aluminium Powerbooks)
  * Elantech (EeePC)
  * bcm5974 (Macbook Air (Jan 2008), Macbook Pro Penryn (Feb 2008), iPhone
    (2007), iPod Touch (2008)

  Note that support for appletouch, elantech and bcm5974 requires the respective
  kernel module.
  A touchpad by default operates in compatibility mode by emulating a standard
  mouse. However, by using a dedicated driver, more advanced features of the
  touchpad become available.

  Features:

      * Movement with adjustable, non-linear acceleration and speed.
      * Button events through short touching of the touchpad ("tapping").
      * Double-Button events through double short touching of the touchpad.
      * Dragging through short touching and holding down the finger on the
        touchpad.
      * Middle and right button events on the upper and lower corner of the
        touchpad.
      * Vertical scrolling (button four and five events) through moving the
        finger on the right side of the touchpad.
      * The up/down button sends button four/five events.
      * Horizontal scrolling (button six and seven events) through moving the
        finger on the lower side of the touchpad.
      * The multi-buttons send button four/five events, and six/seven events for
        horizontal scrolling.
      * Adjustable finger detection.
        Multifinger taps: two finger for middle button and three finger for
        right button events. (Needs hardware support. Not all models implement
        this feature.)
      * Run-time configuration using shared memory. This means you can change
        parameter settings without restarting the X server.


pkgId: 525df75538108d5401b88ea78f69287e09b9c6d90090ced2137f848076be8a5e
name: xorg-x11-util-macros
arch: src
version: 1.14.0
epoch: 0
release: 2.el6
summary: X.Org X11 Autotools macros
url: http://www.x.org
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: Development/System
rpm_buildhost: x86-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xorg-x11-util-macros-1.14.0-2.el6.src.rpm
checksum_type: sha256
description:
  X.Org X11 autotools macros required for building the various packages that
  comprise the X Window System.


pkgId: 358a59b6a03580a9ca77e5e470a2ad52d71295661f12c3a3944626bd86393591
name: xqilla
arch: src
version: 2.2.3
epoch: 0
release: 8.el6
summary: XQilla is an XQuery and XPath 2.0 library, built on top of Xerces-C
url: http://xqilla.sourceforge.net/HomePage
rpm_license: ASL 2.0
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xqilla-2.2.3-8.el6.src.rpm
checksum_type: sha256
description:
  XQilla is an XQuery and XPath 2.0 implementation written in C++ and based
  on Xerces-C. It implements the DOM 3 XPath API, as well as having it's own
  more powerful API. It conforms to the W3C proposed recomendation of XQuery
  and XPath 2.0.


pkgId: a18d1619119f1b74ec0f15ca01404958ef52a4837061379c8be35de95276dd5d
name: xrestop
arch: src
version: 0.4
epoch: 0
release: 7.1.el6
summary: X Resource Monitor
url: http://www.freedesktop.org/Software/xrestop
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xrestop-0.4-7.1.el6.src.rpm
checksum_type: sha256
description:
  A utility to monitor application usage of X resources in the X Server, and
  display them in a manner similar to 'top'.  This is a very useful utility
  for tracking down application X resource usage leaks.


pkgId: c11bf410f95c7b60a5c2560c35e9bf3dd22c8e66c361d058a2db41c996b2cac4
name: xsane
arch: src
version: 0.997
epoch: 0
release: 8.el6
summary: X Window System front-end for the SANE scanner interface
url: http://www.xsane.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: ppc-012.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xsane-0.997-8.el6.src.rpm
checksum_type: sha256
description:
  XSane is an X based interface for the SANE (Scanner Access Now Easy)
  library, which provides access to scanners, digital cameras, and other
  capture devices. XSane is written in GTK+ and provides control for
  performing the scan and then manipulating the captured image.


pkgId: 06661f68160f9f0692fec647d8697f974c9464d8976d01ff4f973c803d32814c
name: xsettings-kde
arch: src
version: 0.11
epoch: 0
release: 1.el6
summary: XSettings Daemon for KDE
url: http://svn.mandriva.com/cgi-bin/viewvc.cgi/soft/theme/xsettings-kde/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: js20-bc2-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xsettings-kde-0.11-1.el6.src.rpm
checksum_type: sha256
description:
  This package provides a XSettings daemon for KDE Desktop Environment.
  It allows XSettings aware applications (all GTK+ 2 and GNOME 2 applications)
  to be informed instantly of changes in KDE configuration, such as theme name,
  default font and so on.


pkgId: 72839c2a4abbd0ea30db385e02b498722d677dc690d468d4430ecdcd013aae4a
name: xterm
arch: src
version: 253
epoch: 0
release: 1.el6
summary: Terminal emulator for the X Window System
url: http://dickey.his.com/xterm
rpm_license: MIT
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: ppc-007.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xterm-253-1.el6.src.rpm
checksum_type: sha256
description:
  The xterm program is a terminal emulator for the X Window System. It
  provides DEC VT102 and Tektronix 4014 compatible terminals for
  programs that can't use the window system directly.


pkgId: 03ea8f7f230cafdc6be7d30dbe044ac2027467ca80f69ad5d1de2f6ab1b85ddf
name: xulrunner
arch: src
version: 10.0.1
epoch: 0
release: 2.el6_2
summary: XUL Runtime for Gecko Applications
url: http://developer.mozilla.org/En/XULRunner
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ppc-002.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xulrunner-10.0.1-2.el6_2.src.rpm
checksum_type: sha256
description:
  XULRunner is a Mozilla runtime package that can be used to bootstrap XUL+XPCOM
  applications that are as rich as Firefox and Thunderbird. It provides mechanisms
  for installing, upgrading, and uninstalling these applications. XULRunner also
  provides libxul, a solution which allows the embedding of Mozilla technologies
  in other projects and products.


pkgId: 349509f550a1aee48075ca19dbdb18e4e3bbc00edd7effa52da81113e12270e0
name: xvattr
arch: src
version: 1.3
epoch: 0
release: 18.el6
summary: Utility for getting and setting Xv attributes
url: http://www.dtek.chalmers.se/groups/dvd/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: ppc-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xvattr-1.3-18.el6.src.rpm
checksum_type: sha256
description:
  This program is used for getting and setting Xv attributes such as
  XV_BRIGHTNESS, XV_CONTRAST, XV_SATURATION, XV_HUE, XV_COLORKEY, etc.


pkgId: 41fde90dd6669b41feee5eea9e8607fac3be02f03ae9be2dbf7d2c081eb658ac
name: xz
arch: src
version: 4.999.9
epoch: 0
release: 0.3.beta.20091007git.el6
summary: LZMA compression utilities
url: http://tukaani.org/xz/
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/File
rpm_buildhost: js20-bc1-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/xz-4.999.9-0.3.beta.20091007git.el6.src.rpm
checksum_type: sha256
description:
  XZ Utils are an attempt to make LZMA compression easy to use on free (as in
  freedom) operating systems. This is achieved by providing tools and libraries
  which are similar to use than the equivalents of the most popular existing
  compression algorithms.

  LZMA is a general purpose compression algorithm designed by Igor Pavlov as
  part of 7-Zip. It provides high compression ratio while keeping the
  decompression speed fast.


pkgId: b72227faa82a8995a24553ba39c7f58d56a9cd533e4d67e628ac9b3980183370
name: yajl
arch: src
version: 1.0.7
epoch: 0
release: 3.el6
summary: Yet Another JSON Library (YAJL)
url: http://lloyd.github.com/yajl/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yajl-1.0.7-3.el6.src.rpm
checksum_type: sha256
description:
  Yet Another JSON Library. YAJL is a small event-driven
  (SAX-style) JSON parser written in ANSI C, and a small
  validating JSON generator.


pkgId: 6720dc0086a7fa1ed2279e26919c55a4c4c77ed999af5825278f5ee33f7fd895
name: yap
arch: src
version: 5.1.3
epoch: 0
release: 2.1.el6
summary: High-performance Prolog Compiler
url: http://www.ncc.up.pt/~vsc/Yap
rpm_license: Artistic 2.0 or LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: js20-bc2-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yap-5.1.3-2.1.el6.src.rpm
checksum_type: sha256
description:
  A high-performance Prolog compiler developed at LIACC, Universidade do
  Porto. The Prolog engine is based in the WAM (Warren Abstract
  Machine), with several optimizations for better performance. YAP
  follows the Edinburgh tradition, and is largely compatible with the
  ISO-Prolog standard and with Quintus and SICStus Prolog.


pkgId: 18bed4330460f860d4bbf0c7ffa7243b911e283dab8a19546e1f7a38cb19bf7c
name: yelp
arch: src
version: 2.28.1
epoch: 0
release: 13.el6_2
summary: Help browser for the GNOME desktop
url: http://live.gnome.org/Yelp
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ppc-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yelp-2.28.1-13.el6_2.src.rpm
checksum_type: sha256
description:
  Yelp is the help browser for the GNOME desktop. It is designed
  to help you browse all the documentation on your system in
  one central tool, including traditional man pages, info pages and
  documentation written in DocBook.


pkgId: 5a10a61a7a63e5178fa5967cecfdd5578e599fdd46f6e8820ac2305877635ef3
name: yp-tools
arch: src
version: 2.9
epoch: 0
release: 10.el6
summary: NIS (or YP) client programs
url: http://www.linux-nis.org/nis/yp-tools/index.html
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-001.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yp-tools-2.9-10.el6.src.rpm
checksum_type: sha256
description:
  The Network Information Service (NIS) is a system which provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network.  NIS can enable
  users to login on any machine on the network, as long as the machine
  has the NIS client programs running and the user's password is
  recorded in the NIS passwd database.  NIS was formerly known as Sun
  Yellow Pages (YP).

  This package's NIS implementation is based on FreeBSD's YP and is a
  special port for glibc 2.x and libc versions 5.4.21 and later.  This
  package only provides the NIS client programs.  In order to use the
  clients, you'll need to already have an NIS server running on your
  network. An NIS server is provided in the ypserv package.

  Install the yp-tools package if you need NIS client programs for machines
  on your network.  You will also need to install the ypbind package on
  every machine running NIS client programs.  If you need an NIS server,
  you'll need to install the ypserv package on one machine on the network.


pkgId: c95ec94e5ff5b937f22eb51a0ad87ebee7b2dd8ff0a86ff18fbe8f4c4308f75e
name: ypbind
arch: src
version: 1.20.4
epoch: 3
release: 29.el6
summary: The NIS daemon which binds NIS clients to an NIS domain
url: http://www.linux-nis.org/nis/ypbind-mt/index.html
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: js20-bc2-12.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/ypbind-1.20.4-29.el6.src.rpm
checksum_type: sha256
description:
  The Network Information Service (NIS) is a system that provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network. NIS can allow users
  to log in on any machine on the network, as long as the machine has
  the NIS client programs running and the user's password is recorded in
  the NIS passwd database. NIS was formerly known as Sun Yellow Pages
  (YP).

  This package provides the ypbind daemon. The ypbind daemon binds NIS
  clients to an NIS domain. Ypbind must be running on any machines
  running NIS client programs.

  Install the ypbind package on any machines running NIS client programs
  (included in the yp-tools package). If you need an NIS server, you
  also need to install the ypserv package to a machine on your network.


pkgId: cec0c9dc65c761bdd19d5ff713d2698e35052198931d4e9712d468136650bae4
name: ypserv
arch: src
version: 2.19
epoch: 0
release: 18.el6
summary: The NIS (Network Information Service) server
url: http://www.linux-nis.org/nis/ypserv/index.html
rpm_license: GPLv2
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ppc-010.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/ypserv-2.19-18.el6.src.rpm
checksum_type: sha256
description:
  The Network Information Service (NIS) is a system that provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network. NIS can allow users
  to log in on any machine on the network, as long as the machine has
  the NIS client programs running and the user's password is recorded in
  the NIS passwd database. NIS was formerly known as Sun Yellow Pages
  (YP).

  This package provides the NIS server, which will need to be running on
  your network. NIS clients do not need to be running the server.

  Install ypserv if you need an NIS server for your network. You also
  need to install the yp-tools and ypbind packages on any NIS client
  machines.


pkgId: c45efab0de94b5bd16712cfb29db2de16f8736dd4cc48947420a605a9040c130
name: yum
arch: src
version: 3.2.27
epoch: 0
release: 14.el6
summary: RPM installer/updater
url: http://yum.baseurl.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ppc-006.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yum-3.2.27-14.el6.src.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically prompting the user as necessary.


pkgId: 6674fbcfe33c7c5a751980d6c6044344b828c13f21ccec326bcabbbfc3ad4e6e
name: yum
arch: src
version: 3.2.29
epoch: 0
release: 17.el6
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: x86-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yum-3.2.29-17.el6.src.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: df6d5d4edff8b05a2366bd90d9a59b5754bcbc3bc07049bf4c105889b88c8957
name: yum-autoupdate
arch: src
version: 2
epoch: 5
release: 0.1.rolling.SL6
summary: RPM installer/updater config files
url: http://www.scientificlinux.org/
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-autoupdate-2-0.1.rolling.SL6.src.rpm
checksum_type: sha256
description:
  Setup yum in your daily cron.
  Also provides yum.cron.excludes, a list of packages excluded from the
  yum autoupdate.  Packages listed in the yum.cron.excludes are not excluded
  when a user runs yum interactivly.


pkgId: d0236ff357a883b71f549ffabc5df3e659bbb88111bedee173b7462df47776ee
name: yum-autoupdate
arch: src
version: 2
epoch: 5
release: 1
summary: Automatically update your machine daily via yum
url: http://www.scientificlinux.org/
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-autoupdate-2-1.src.rpm
checksum_type: sha256
description:
  Automatically update your machine daily via yum.  If anything is updated,
  it is logged in the yum.log and you are sent an email.
  The configuration file is in /etc/sysconfig/yum-autoupdate.


pkgId: 4f350e35d79c2574e29331e0730ffcccebde24be856c90a6dac51df206f1fd05
name: yum-autoupdate
arch: src
version: 2
epoch: 5
release: 4.1
summary: Automatically update your machine daily via yum
url: http://www.scientificlinux.org/
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-autoupdate-2-4.1.src.rpm
checksum_type: sha256
description:
  Automatically update your machine daily via yum.  If anything is updated,
  it is logged in the yum.log and you are sent an email.
  The configuration file is in /etc/sysconfig/yum-autoupdate and most
  behavior can be customized.


pkgId: 0cbbfc4ab0ad2882c475a59a7827396ade85a6631ce832416a74f0162ed8b969
name: yum-autoupdate
arch: src
version: 2
epoch: 5
release: 6.1
summary: Automatically update your machine daily via yum
url: http://www.scientificlinux.org/
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: sartre.fnal.gov
location_href: sl6/yum-autoupdate-2-6.1.src.rpm
checksum_type: sha256
description:
  Automatically update your machine daily via yum.  If anything is updated,
  it is logged in the yum.log and you are sent an email.

  The configuration file is in /etc/sysconfig/yum-autoupdate and most
  behavior can be customized.


pkgId: dd7070902d51ba9341e7a82b79b5211a59527704768a3d196e36edf9e7f0e462
name: yum-conf-adobe
arch: src
version: 6
epoch: 0
release: 1.1
summary: linux.adobe.com Repository Configuration
url: http://linuxdownload.adobe.com/
rpm_license: BSD
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-conf-adobe-6-1.1.src.rpm
checksum_type: sha256
description:
  This package pulls in adobe-release which contains the
  linuxdownload.adobe.com yum repository for your architecture.


pkgId: eeb2d4f7e4663d97eca39b548b7cb5679a1b882ff33ccc4542a573e0d8abcf13
name: yum-conf-atrpms
arch: src
version: 6
epoch: 0
release: 1.1
summary: ATrpms configuration files for package managers.
url: http://ATrpms.net/
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-conf-atrpms-6-1.1.src.rpm
checksum_type: sha256
description:
  This package pulls in atrpms-repo which contains the
  atrpms configuration files for yum, smart and apt.


pkgId: c4a5c289a61a84115843dac55ad9c892c48d904ede322378a763c9fe2a09b0d2
name: yum-conf-elrepo
arch: src
version: 6
epoch: 0
release: 1.1
summary: ElRepo.org Community Enterprise Linux Repository release file
url: http://elrepo.org/
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-conf-elrepo-6-1.1.src.rpm
checksum_type: sha256
description:
  This package pulls in elrepo-release which contains the
  yum configuration for the ElRepo.org Community
  Enterprise Linux Repository, as well as the public GPG keys
  used to sign packages.


pkgId: cc5fc6b7f5a5735200a30c6aded7dcf2c2a77753ae7a2f842d8f267864b59786
name: yum-conf-epel
arch: src
version: 6
epoch: 0
release: 1.1
summary: Extra Packages for Enterprise Linux repository configuration
url: http://download.fedoraproject.org/pub/epel
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-conf-epel-6-1.1.src.rpm
checksum_type: sha256
description:
  This package pulls in epel-release which contains the
  Extra Packages for Enterprise Linux (EPEL) repository
  GPG key as well as configuration for yum and up2date.


pkgId: b57f1c58ba56eb749fd028b2de293096a40f71b73c785c57cbcd05e81c670321
name: yum-conf-rpmforge
arch: src
version: 6
epoch: 0
release: 1.1
summary: RPMforge release file and RPM repository configuration
url: http://rpmforge.net/
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-conf-rpmforge-6-1.1.src.rpm
checksum_type: sha256
description:
  This package pulls in rpmforge-release which contains the
  apt, yum and smart configuration for the RPMforge RPM Repository,
  as well as the public GPG keys used to sign them.


pkgId: 07f515080b926da157bd06dba8248b87fe39d95c65d78a0bfda8ef433c2fe450
name: yum-conf-rpmfusion
arch: src
version: 6
epoch: 0
release: 0.1
summary: RPMfusion release file and RPM repository configuration
url: http://rpmforge.net/
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-conf-rpmfusion-6-0.1.src.rpm
checksum_type: sha256
description:
  This package pulls in rpmfusion-free-release which contains the
  yum configuration for the RPMfusion RPM Repository, as well as the
  public GPG keys used to sign them.

  It is the responsibility of the end user to verify their compliance
  with the licensing of the rpms in this repository.


pkgId: d1ed4153e0f9ea97004282de1625376ac29a2c4c057da689959d71cd2827a405
name: yum-conf-sl-other
arch: src
version: 6
epoch: 0
release: 0.1.rolling
summary: Repository configuration for other SL yum repository's
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-conf-sl-other-6-0.1.rolling.src.rpm
checksum_type: sha256
description:
  This package contains the repository configuration for Scientific Linux's
  fastbugs, testing, and debuginfo repositories.
  When installed, none of these repositories are enabled by default


pkgId: 997fc62c2f1f223420bffe9f36a8bde7a431cb2b087147c98f93df4cc5ea3b65
name: yum-conf-sl6x
arch: src
version: 1
epoch: 5
release: 1
summary: SL6x yum configuration files
url: http://www.scientificlinux.org/
rpm_license: GPL
rpm_group: System Environment/Base
rpm_buildhost: compose.fnal.gov
location_href: sl6/yum-conf-sl6x-1-1.src.rpm
checksum_type: sha256
description:
  Yum repository config files that point to Scientific Linux 6x, which
  is always the latest release.  With this installed your system will
  automatically be updated to the latest SL6 release as soon as it is
  released.


pkgId: 2f928f3829c5ad42b098082276c38926d1f52c7db1c867800560eec6cd0bce0b
name: yum-presto
arch: src
version: 0.6.2
epoch: 0
release: 1.el6
summary: Presto plugin for yum
url: http://www.lesbg.com/jdieter/presto/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: spark.z900.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yum-presto-0.6.2-1.el6.src.rpm
checksum_type: sha256
description:
  Yum-presto is a plugin for yum that looks for deltarpms rather than rpms
  whenever they are available.  This has the potential of saving a lot of
  bandwidth when downloading updates.

  A Deltarpm is the difference between two rpms.  If you already have foo-1.0
  installed and foo-1.1 is available, yum-presto will download the deltarpm
  for foo-1.0 => 1.1 rather than the full foo-1.1 rpm, and then build the full
  foo-1.1 package from your installed foo-1.0 and the downloaded deltarpm.


pkgId: c4a238b16fdecf388ee2cab97edefdeda05ec0e8c05bcabc21bd0d63ab1b268e
name: yum-utils
arch: src
version: 1.1.26
epoch: 0
release: 11.el6
summary: Utilities based around the yum package manager
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: x86-004.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yum-utils-1.1.26-11.el6.src.rpm
checksum_type: sha256
description:
  yum-utils is a collection of utilities and examples for the yum package
  manager. It includes utilities by different authors that make yum easier and
  more powerful to use. These tools include: debuginfo-install, package-cleanup,
  repoclosure, repodiff, repo-graph, repomanage, repoquery, repo-rss, reposync,
  repotrack, verifytree, yum-builddep, yum-complete-transaction, yumdownloader,
  yum-debug-dump, yum-debug-restore and yum-groups-manager.


pkgId: 5593dbb794fbd141f0c1c1253d6bff4435c308f82c96155105529526dcb9f725
name: yum-utils
arch: src
version: 1.1.30
epoch: 0
release: 10.el6
summary: Utilities based around the yum package manager
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: s390-009.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yum-utils-1.1.30-10.el6.src.rpm
checksum_type: sha256
description:
  yum-utils is a collection of utilities and examples for the yum package
  manager. It includes utilities by different authors that make yum easier and
  more powerful to use. These tools include: debuginfo-install,
  find-repos-of-install, needs-restarting, package-cleanup, repoclosure,
  repodiff, repo-graph, repomanage, repoquery, repo-rss, reposync,
  repotrack, verifytree, yumdownloader, yum-builddep, yum-complete-transaction,
  yum-config-manager, yum-debug-dump, yum-debug-restore and yum-groups-manager.


pkgId: d0f463329ff9e9313ff0e8c12c062ac22bb41e5efc7fed6b523d4db8f1851e93
name: yum-utils
arch: src
version: 1.1.30
epoch: 0
release: 14.el6
summary: Utilities based around the yum package manager
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: x86-010.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/yum-utils-1.1.30-14.el6.src.rpm
checksum_type: sha256
description:
  yum-utils is a collection of utilities and examples for the yum package
  manager. It includes utilities by different authors that make yum easier and
  more powerful to use. These tools include: debuginfo-install,
  find-repos-of-install, needs-restarting, package-cleanup, repoclosure,
  repodiff, repo-graph, repomanage, repoquery, repo-rss, reposync,
  repotrack, show-installed, show-changed-rco, verifytree, yumdownloader,
  yum-builddep, yum-complete-transaction, yum-config-manager, yum-debug-dump,
  yum-debug-restore and yum-groups-manager.


pkgId: 04e95a164da65b939f93600da3fb6d6c4cf5d60cb8d57f78f0dd7d9a611e4ab1
name: zenity
arch: src
version: 2.28.0
epoch: 0
release: 1.el6
summary: Display dialog boxes from shell scripts
url: http://directory.fsf.org/zenity.html
rpm_license: LGPLv2+
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: js20-bc2-11.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/zenity-2.28.0-1.el6.src.rpm
checksum_type: sha256
description:
  Zenity lets you display Gtk+ dialog boxes from the command line and through
  shell scripts. It is similar to gdialog, but is intended to be saner. It comes
  from the same family as dialog, Xdialog, and cdialog.


pkgId: cc807c4362d1be2172329e9902ef435c7050b106f804319f59f44f49f0c45c98
name: zip
arch: src
version: 3.0
epoch: 0
release: 1.el6
summary: A file compression and packaging utility compatible with PKZIP
url: http://www.info-zip.org/Zip.html
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Archiving
rpm_buildhost: ppc-003.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/zip-3.0-1.el6.src.rpm
checksum_type: sha256
description:
  The zip program is a compression and file packaging utility.  Zip is
  analogous to a combination of the UNIX tar and compress commands and
  is compatible with PKZIP (a compression and file packaging utility for
  MS-DOS systems).

  Install the zip package if you need to compress files using the zip
  program.


pkgId: aedbe35f73c07e09d939461abfa9b6954b4493269f8a90499d28ce510a696c53
name: zlib
arch: src
version: 1.2.3
epoch: 0
release: 25.el6
summary: The zlib compression and decompression library
url: http://www.gzip.org/zlib/
rpm_license: zlib and Boost
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: js20-bc2-10.build.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/zlib-1.2.3-25.el6.src.rpm
checksum_type: sha256
description:
  Zlib is a general-purpose, patent-free, lossless data compression
  library which is used by many different programs.


pkgId: e0afb88f7e3ae47501413aadd76beac8a0f93210a127ee6a981ee2dadd812abb
name: zsh
arch: src
version: 4.3.10
epoch: 0
release: 4.1.el6
summary: A powerful interactive shell
url: http://zsh.sunsite.dk/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Shells
rpm_buildhost: ppc-005.build.bos.redhat.com
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: vendor/zsh-4.3.10-4.1.el6.src.rpm
checksum_type: sha256
description:
  The zsh shell is a command interpreter usable as an interactive login
  shell and as a shell script command processor.  Zsh resembles the ksh
  shell (the Korn shell), but includes many enhancements.  Zsh supports
  command line editing, built-in spelling correction, programmable
  command completion, shell functions (with autoloading), a history
  mechanism, and more.


