This file has been updated periodically ever since METAFONT84 was born. What you are about to read is "authentic source material" from the early days before the program converged. Module numbers on the first entries may bear little relation to those in Volume D. Entries are in chronological order; thus the most recent news appears at the bottom of the file. ------------------------------------------------------------------------------- (rough list of all bugs found in MF after it passed syntax check) Starting with Version -100.0: [Mar 27, first run, about 00:30] 1. fix_date_and_time was badly patched in INIMF. 2. cur_tok function forgot "cur_tok:=p" at the end; PASCAL doesn't catch that. 3. "multiletter control sequences" msgs should say "symbolic tokens". Version -99.0: [still Mar 27, done while waiting for WEAVE/TeX output] 4. do_statement should initialize cur_type:=vacuous. 5. find_variable has misplaced p:=equiv(p). 6. one-character primitives shouldn't decrease str_ptr. 7. clear_symbol had "q" at end where I meant to say "p". 8. help message for extra token flushing improved. 9. "buffer[k]" should be "buffer[j]" for 1-character id_lookup. 10. def_delims forgot to get_next afterwards. 11. type_command at beginning of statement wasn't diverted. 12. menu always came out after help message. 13. forgot to return after getting num/str token from token list. Version -98.0: [March 28] 14. scan_declared_variable flushes too much. 15. ordered pairs: one level of indirection was forgotten. 16. type declarations must add "unknown" bit. 17. semicolon+ added to do_statement cases. 18. base_ident should get max_str_ref. 19. "internal[...]" missing in date for base_ident. 20. do_binary(p,c) should be do_binary(p,d) after continue_path 21. in scan_def after get_clear_symbol I need to get_next. 22. get_next needed at end of scan_def. 23. get_next needed at end of mode_command processing. 24. randomseed missing error typo: `;' for `:='. 25. print_nl("") at beginning of show. 26. refcounts on macro calls were incremented twice. 27. forgot to advance loc after getting num/str token from token list. 28. "/" has the wrong command code. 29. get_x_next needed after, e.g., "1/2" in scan_primary. 30. take_fraction should be make_fraction in call of frac_mult. 31. v:=dep_list(v) forgotten in dep+dep branch of add_or_subtract. 32. q:=link(q) etc misplaced and omitted in p_plus_fq and p_plus_q. 33. dep_finish recycled a dependency list twice. 34. call of dep_finish should use null not cur_exp. 35. decided that "3 3" shouldn't equal 9. [also put in new code for the addto command] Version -97.0: [March 29] 36. forget to set q:=qq in scan_expression. 37. first line of print_path: forgot print_ln. 38. typo in set_controls: right_y should be left_y. 39. toss_knot_list forgot that it has a circular list to toss. 40. print_exp shows big nodes backwards. 41. angle brackets didn't look good in print_exp; took them out. 42. left_brace must be between min_tertiary and max_tertiary. 43. prev_dep should point back to tail, not head, of previous list. (that error was in encapsulate and ) 44. nonlinear_eq should leave node p vacant, sometimes. 45. conditional routine forgot that get_boolean starts with get_x_next. 46. forgot get_x_next in processing of else. 47. str_ref not initialized by make_string. 48. param_start not initialized properly. 49. "%EXPR" didn't look good in token list. 50. "{loop}" not necessary in forever loops; there's already enough. 51. macro name didn't come out right when tracing macros. 52. macro parameters weren't shown when tracing macros. 53. quote marks missing when displaying strings. 54. parameter names on macro call trace should look nicer. 55. statement beginning with bad token: error message needed. 56. `->' desired in context lines of macro. 57. forgot q:=loop_list_loc(s) in begin_iteration. [also put in new code for shipout] Version -96.0: [March 30] 58. forgot loop_type(s):=null in begin_iteration. 59. forgot value(p):=null after type(p):=type(pp) in find_variable. 60. forgot to delete_pen_ref after filling a contour. 61. check that it's a cycle before calling make_spec. 62. "if tracing_stats>0" should be "if internal[tracing_stats]>0"! 63. forgot get_next after showdependencies. 64. forgot link(r):=p at end of dependency list addition. 65. extra `get_x_next' in . 66. typos in last half of : mind the p's and q's. 67. take_fraction should be make_fraction in simple case of two givens. 68. in print_exp of unknown type, stop if v=null. 69. showtoken forgot to stop; also should be consistent with TeX. 70. "continue" label needed in error routine, after all. 71. id_lookup should treat length-one identifiers by simpler method. (in particular, this allows it to find unprintable ones!) 72. need psi[n+1]:=psi[1] in cyclic case of make_choices. 73. tension/controls take primaries as arguments, not expressions. 74. print_spec didn't initialize octant. 75. print_spec: break lines into two, since they are quite long. 76. smooth_moves not called in fill_spec. 77. typo < for > in edge_prep. 78. edge tracing misses half the corners, and forgot to set trace_y. 79. edge_prep needs extra logic when rover=head. 80. make_good should compute cur_d based on good values, not original values; but we sometimes need the other alternative too. 81. valid_sum: the test was backwards. 82. print_weight blunder: ho(q) should be ho(info(q)). 83. forgot init_gf in shipout. 84. typo in : if total_chars<>1 then print("s"). 85. initializations of ww, prev_w, and m were forgotten in ship_out. 86. typos in initialization of prev_m and gf_min_x. 87. forgot to update prev_n in ship_out. 88. relax becomes "expandable". 89. internal[x]>1 should be internal[x]>unity! 90. forgot to restore normal scanner_status in pass_text. 91. (end occurred when if...) was inevitable. [also put in new code for openwindow, display] Version -95.0: [April 1] 92. forgot to unscale the window numbers in that new code. 93. had w<0 test instead of w<=0 in . 94. prev_w:=w should be done in all cases of . 95. forgot get_x_next after scanning `1/2'. 96. in do_assignment, after recycle_value(p) I need to set type(p):=something. 97. omit `.' after the equivalent in showtoken. 98. in , I said "until q=p"; I meant "until q=value(p)". 99. print_macro_name said "info(link(a))"; meant "text(info(info(link(a))))". 100. forgot get_x_next after macro_call in scan_primary. 101. scan_primary installed dependent components badly (data structure error). 102. new_structure failed in case of generic_subscript (data structure error). 103. param_type case of print_cmd_mod had bad if/else nesting (language error). 104. null_path forgot to return a value (language error). 105. p_with_x_becoming_q had typos (q and f for x). 106. should end with cur_exp:=t, not r. 107. subscripted definitions: out of sync; scan_primary loop needs revision. 108. secondarydef went through scan_def instead of make_op_def. 109. make_op_def forgot the final get_next. 110. make_op_def also forgot to insert the general_macro preface. 111. showvar shows too much of macro variables. Version -94.0: [April 4] 112. single_dependency needs to take account of the scale factor. 113. add_or_subtract starts out with wrong v value. [bug 31 was fixed wrong] 114. print_exp needs a case for t=independent. 115. also numeric_type, and case v=null of pair_type, transform_type. 116. end_token_list thought identity_macro and insertions had ref counts. 117. disp_var should display also in case of generic subscripts. 118. find_var should put value(pp):=null when it sets type(pp):=numeric_type. 119. yet another problem in : copy_dep_list(dep_list(q)). 120. scan_primary should flush_node_list(q) before make_exp_copy(p). 121. make_scaled arguments reversed in p_over_v. [also added code for new internals: smoothing, autorounding] [also added code for showstats] Version -90.0: [April 5] 122. Should check range of variables when they become known. 123. should include begin...end (WEB language error). 124. forever should be followed by a colon. 125. dangling else problem in make_eq: "abc"="abc" considered false. 126. showstats, showtoken should read the semicolon before stopping. 127. print_variable_name balked at, e.g., xpart of a capsule. Version -89.0: [April 6] 128. after &foo, shouldn't assume there's an input file present. 129. forever forgot get_next. 130. pair=path and path=pair should coerce the pair to be a path. 131. similarly in the operand to `addto'. [added new code for cull command] [minor revision of internal quantities; e.g., labeling is out, fontmaking is in] Version -88.0: [April 7] 132. "string" operator is renamed "str". 133. min/max coordinates added to boc command. 134. labeling_command removed; it will be implemented in macros. 135. info(p) should be attr_loc(p) in flush_variable. 136. make_spec didn't realize the need for xh and yh. 137. gf_new_row parameters had sign reversed. 138. the "numeric" case was left out of recycle_value. [added new code for special/numspecial] Version -87.0: [April 13] 139. q:=qq should apply also after , in scan_expr. 140. param_size: better defined than a constant. 141. surprise: back_input fails when cur_cmd=expr_arg, as it changes limit. 142. forgot to change right_type(r). 143. show shows the whole path. 144. expr like 0..1 leads to with q undefined. 145. typos in , clobbered dx2 and used right_type(p) twice. 146. need to adjust expr_arg when macro is inside a macro! 147. expr_arg forbidden to be in a text argument. 148. frozen_relax added to prevent premature termination. [I took out the code used for debugging the screen interface] [added "cycle", a unary operator taking path to boolean] [added the code for concatenation and for str and for xpart..yypart] Version -86.0: [April 25] 149. not_scolded_yet was never set false after scolding. 150. Missing "q:=s" at the end of . 151. In @, add get_next after back_error. 152. New xpart routine didn't recycle other components of the big node. [added the "hard_times" case of multiplication] [added the complete set of boolean expressions] [added the eight transformations, applied to three kinds of expressions] [added the save command] [added the interim command] [added the let command] [added the pen operations] 153. Incomplete help message on "Not a variable". 154. forgot begin...end in the last section of materialize_pen. 155. blunder : length(p,s,q) should be length(s,q,r). 156. : forgot begin...end here too. 157. "(newly created)" shd be " (newly created)". 158. path_trans: forgot to unstash the capsule p. 159. set_up_trans: transform_type should be transformed_by, in one place. 160. : had p instead of q, in several places. 161. edges_trans: an edges variable isn't in a capsule. Version -85.0: [May 2] 162. begingroup ... endgroup should be allowed as compound statement. 163. pausing shouldn't clobber "showit". (WAITS version only) 164. Improved help message for isolated expressions. 165. Bad error recovery after "Not a variable" in showvar. 166. Typo in clear_symbol: name_type(p) instead of name_type(q). 167. "%" and ";" to be left out of file names being input. 168. dep_finish used v for two purposes; wrong declared type. 169. autorounding 2 suppresses correction when the derivative isn't critical. 170. tab characters should be changed to spaces on input. (WAITS version) 171. harmful goto: Forgot to |return| after path_trans and edge_trans. [added ord, hex, oct, length, char, decimal, and jobname] Version -80.0: [May 4] 172. showvar still screwed up. 173. don't clobber screen for prompt_input (WAITS only). 174. length of non-cyclic path is one too high. 175. evoked the wrong message. 176. better error message needed on `Equation cannot be performed'. 177. ">> " inserted before expression displays. 178. should dup_offset also when n=0. 179. pencircle was a factor of 2 too big. 180. cosine of 180 should be -1 exactly. 181. ord "" should be -1. 182. shipout should allow expressions as well as variables. 183. "mod outer_tag" needed in various tests on eq_type. 184. merge_edges forgot to adjust for changes in m_offsets. 185. typo, ww for w in print_pen. 186. typo, "outer" for "errhelp" in print_cmd_mod (message case). [added "also"] [added "message", "errmessage", "errhelp"] [added "outer", "inner"] [added "readterminal", "readstring"] Version -79.0: [May 6] 187. read_toks forgot to include the general_macro token. 188. offset_prep should treat n=0 like n=1. 189. cusp transitions (from change 169) must be suppressed in envelope case. 190. shouldn't change xp or yp. 191. was used too late. 192. had a redundant test (a relic of old code). 193. wastefully made the same fraction three times. 194. doublepath should split the cycle. 195. `if k=0' in fin_offset_prep should have been `if k=1'. 196. `done:' misplaced in . 197. also move[move_ptr] should be initialized to 1 there, not 0. 198. skew is used with p=q in fill_envelope. 199. it's no use tracing subdivision for offsets, since everything is skewed. 200. in , round_unscaled should be floor_unscaled. 201. unskewing: wrong formula (x was .5 too large). 202. elliptical pens: better correction for the case gamma<=abs(alpha). 203. dual env_move was updated badly, in both and . 204. dual env_move to move: subscripts were off by 1. 205. should set ww:=knil(link(h)), not link(h). [added ++] Version -70.0: [May 9] 206. suppressed cusp rounding in envelope case too. 207. `show' should use `>> ' when it shows an expression. 208. streamlined the test for bad lambda and mu in |skew|. 209. after linear_eq, must check if type(cur_exp)=known. 210. print_spec surprise: contours might never travel toward the first octant! 211. t0,t1,t2 sign was reversed in . Version -69.0: [May 10] 212. "showvar" changed to "showvariable". 213. typo: r for r_delim in . 214. "newinternal" feature added. 215. needs to update envmove at end of loop. 216. smooth_moves shouldn't affect the extreme points. 217. floor(unity*(n-1)/n) is unity when n is large; need to be more careful. 218. major improvements to rounding, based on new theory of (x+eps,y+eps^2). 219. pen offsets made symmetrical about the origin. 220. p:=half(p+q) overflow problem in take_fraction, take_scaled. 221. cull_edges now updates the max/min values too. 222. make_spec needs to be more bullet-proof to rounding errors; added `dest's. 223. xmult/ymult/zmult changed to xscaled/yscaled/zscaled. 224. elliptical pens improved by temporarily allowing zero-length lines. [added edge transposition algorithm] Version -67.0: [May 17] 225. copy can encounter a vacuous expression, e.g. in a parameter. 226. xy_swap_edges mustn't change w when inserting a large weight. 227. in #222, had typo pp for r in . 228. in #222, incorrectly assumed local max = global max of cubic. Version -66.0: [May 19] 229. bad_binary(c,p) should have been bad_binary(p,c). 230. enabled comparison of unknown strings. 231. fixed ring_delete to avoid unexpected scolding. 232. should store character width info even when proofing<0. [added all the TFM commands and output routines] [added the `substring' operation] [added `point', `precontrol', `postcontrol'; deleted `direction'] Version -65.0: [May 24] 233. Change error message `(t)point(u)' to `point(t)of(u)'. 234. newinternal to allow a list of tokens. 235. In , should check for overflow before begin_token_list. 236. scan_def didn't allow for the case warning_info=null. Version -60.0: [May 25] 237. increased param_size. 238. added . 239. stopped too early if the first cubic was dead. 240. bad_unary, bad_binary should distinguish pair from unknown pair. 241. yet another "m was scaled instead of fraction. Version -59.0: [May 27] 245. break up initialize routine into two parts (cf init_prim in TeX) Version -58.0: [May 28] 246. do_ship_out should scan_expression, not scan_primary. 247. offset_prep might clobber node q, so we need to search for q again. 248. pair "1" = true! (blunder in type_test) 249. allow strings x in `def f(expr x)=def g=x enddef enddef'. 250. allow exprs in text parameters, in sufficiently easy cases. 251. check right delimiters in macro_call. 252. "Bad window number" message gave unscaled value. 253. turnaround feature improves automatic rounding slightly. 254. primaries changed to expressions in window and cull commands. 255. scan_expression should make (0,0){0,0} a path, not a future path. 256. showvariable and showtoken to allow lists; all shows made consistent. 257. new internal quantity "windingcheck". 258. delete warning message about edges never used. 259. vardef: group the righthand side. 260. show commands stop once each. 261. cur_type should be vacuous after equation or assignment on outer level. Version -57.0: [June 4] 262. added xyzzy diagnostic about effect of autorounding. 263. make_moves now puts xi_corr,eta_corr into halving. [otherwise "draw (0,0)..(9,-.00002)" and "draw (0,-.00002)..(9,0)" fail badly!] Version -56.0: [June 6] 264. smooth_moves changed completely; now is LR symmetric, cleaner. 265. changed "unknown" to "known". 266. pair to path conversion now done on length, makepen, reverse, etc. 267. cycle now defined on arguments of any type. 268. (re 218) sign was flipped in ceiling correction of . [added union, subpath, penoffset, directiontime, intersectiontimes] Note: the first two draw statements in PENS.mf show an interesting effect. With autorounding, the curves are noticeably better, esp the small one. But there are two "holes", because of tiny discrepancies that I believe are unavoidable. Added later: Actually these are avoided by the new smooth_moves, but certain others will not be. Version -50.0 [June 30] 269. smoothing to be shut off at the retrograde transitions 270. more care needed in the rootfinding part of find_direction_time. 271. improved error recovery after "Isolated expression". Version -40.0 [July 3] --- the first version to be "complete"! 272. trivial change in . 273. check that halfwords are large enough to hold edge/weight data. 274. `path reverse (0,1)' should be true. 275. xy_swap_edges might empty the structure; then x_reflect will fail! 276. fix_offset was being done too often, due to improper range test. 277. parameters come out even when tracingonline=0. 278. step-until wasted r and didn't check syntax carefully. 279. had typo: `line' for `group_line'. 280. "You can't dump in a group" error was impossible. 281. need better ETC cutoff in showmacro. 282. print_exp needs to handle independents, because it's used by disp_var. 283. suppress `#### xpart %CAPSULEnnnn' printouts. [added code for everyjob; this version wasn't complete after all!] Version -30.0 [July 9] 284. need better error/help after ` if s1=s2' when the strings are unknown. 285. removed autorounding>2; it was leading to more glitches than it was worth. 286. envelope filling of a cycle to be done by two calls of fill_envelope. 287. "null" changed to "vacuous". 288. cyclic path inserted in another path should retain its last arc. 289. introduce several dozen "put_get" errors for improved recovery. 290. suppress "with autorounding" when autorounding hasn't been set. 291. {loop value} came out even when tracingonline=0. 292. show commands should wake up the terminal before showing their output. 293. forgot error message in `if true else'. Version -20.0 [July 14] 294. need to catch pens that are too large. 295. make_eq dassn't change lhs (because this clobbers the memory links later). 296. string usage is reported too high by showstats. 297. bilin1 and add_mult_dep can call p_plus_fq with type(q)=proto_dependent. 298. forgot to recycle pp. 299. in change number 286, the weight of the two paths should be the same. 300. print_ln sometimes changed to print_nl("") in order to avoid blank lines. 301. xyzzy to be combined with tracingedges. 302. good3 entries should be 1 and 2 (not 1 and 0), to give desired symmetry. Version -10.0 [July 17] 303. had to add `new_if_limit' to `conditional'. 304. `else' can be incomplete as well as `if' and `elseif'. 305. new help "You can't redefine a parameter." 306. print_edges should use cur_edges, because print_weight does. 307. cull shouldn't round; it should use ordinary inequalities. 308. obliterated variable left `0' token hanging in scan_primary. 309. forgot recycle_value(p) in . 310. forgot to check improper culling amounts. 311. `on' to be changed to `inwindow'. 312. >=max_tfm_dimen should be simply >. Version -9.0 [July 19] 313. max_tfm_dimen needs to be decreased by design_size div 2^21. 314. merge test data reporting into the screen display routines. 315. use @# in printout at time of macro expansion tracing. 316. bad recovery after "Incomplete string" error. 317. @ should be usable as a parameter. 318. spacing bad on `missing of' and `too many parameters' errors messages. 319. keep track of largest str_ptr and pool_ptr values; showstats on two lines. Version -8.0 [July 26] [introduced new test routines to study memory usage] 320. make_pen doesn't recycle the knots 321. flush_below often says free_node(2) on node of size 3. 322. make_eq should recycle and free; do_equation shouldn't 323. re #298 and #309: should also free the value nodes! 324. the replacement text of a bad_var definition should be recycled. 325. token lists left unrecycled in error recovery of addto, cull, display. Version -7.0 [July 27] 326. showall to put "(see the transcript file)" after >> if not tracingonline. 327. remove redundant code: hex in print_the_digs; second l=1 in idlookup. 328. procedures never called: b_open_in; round_scaled. 329. need to zero cur_mod after back_expr in . 330. now catches also numbers that round to 1.0. 331. known_pair logic was obsolete; now it is massively simpler. 332. fix_check_sum now zeroes the negative bytes; this simplifies other code. 333. show_dependencies not to show parts of capsules. 334. forgot to set fix_needed:=false! 335. move fix_needed from add_or_subtract to dep_finish. 336. test fix_needed in bilin1 and add_mult_dep. 337. after back_expr in , forgot to unstash p. Version 0.0 [July 28] [Hurray! The preliminary TRAP test is fully passed.] 338. corrected blunder in definition of trans_spec type. (found by Karney) 339. less extreme starting values of gf_min_x and its cousins. 340. uninitialized left_curl was possible. (found by John Hobby) 341. In , need to test sign before the `div 3' ops. 342. In pyth_add, remove `+2' when dividing by 4, to prevent overflow. 343. "Not a variable" changed to "Not a suitable variable". 344. known_pair forgot to reset cur_type. 345. round and floor procedures need to work in the presence of huge arguments. 346. major revision to allow independent variables to disappear silently: 346a. delete null_path and . 346b. delete the hard part of ring_delete, and delete . 346c. stash/unstash/flush_cur_exp routines to allow independent type. 346d. print_exp to allow a ring that contains only capsules. 346e. becomes (major new code). 346f. stash_in needs code to handle the case cur_type=independent. 346g. negation needs code to handle the case cur_type=independent. 346h. take_part needs code to handle the case cur_type=independent. 346i. do_binary needs code to handle either or both operands independent. 346j. frac_mult needs code to handle the case cur_type=independent. 346k. make_eq and try_eq too. 346l. linear_eq needs to check if cur_exp=x and cur_type=independent. 346m. linear_eq displays new dependency only when lhs is interesting. 347. minor improvement for coding style/brevity: the "interesting" function. 348. test `if t, didn't watch for coefficients zeroed. 352. check_mem now checks also the links in the dependency lists. 353. null_pen initialization belongs in , not . 354. fix_dependencies has to worry about coefficients dropping to zero. 355. add tracing to frac_mult. 356. need cur_sym>0 at the time of end_read_terminal. (found by S Robinson) Version 0.1 [August 30] 357. Don't complain about winding_number<=0 when doing a doublepath. 358. Need to test for max_coef=0 in offset_prep. 359. Cusp detection should allow for more rounding error. 360. Major change to path syntax, allowing {dir}..{dir} path joins. 360a. `Fragments' disappear; new_fragment becomes new_knot. 360b. print_path has simpler conventions. 360c. future_path type disappears. 360d. left_brace renumbered and removed from scan_tertiary. 360e. some scan_tertiary code moves to new subroutine scan_direction. 360f. scan_expression has a bunch of new code. 361. scan_expression shouldn't have returned after cycle_hit. 362. abort_path, scrap_knot logic removed from scan_expression. Version 0.2 [September 12] 363. new operator: makepath . 364. define point/precontrol/postcontrol at endpoints and beyond. (JDH) 365. union replaced by +; negation and subtraction allowed on edges. 366. another new operator: totalweight . (JDH's idea) 367. undelimited parameters may be preceded by an optional = or :=. 368. base_area_length was wrong. (affects CH files)(found by Pavel) 369. internal names to be allowable in suffixes. 370. label not_found was misplaced in do_add_to. (found by PasMESA translator) 371. progress report should be given at time of shipout. 372. procedures make_choices, make_spec,fill_envelope split into shorter pieces. 373. locals of cubic_intersection made global so that people could split it. Version 0.3 [September 27] 374. allow ::= 375. equation that's off by .0001 shouldn't be called inconsistent. 376. bug in skew: must compute x_coord(q) and y_coord(q) exactly. 377. right/left/up/down to be assigned to octants 1/5/2/6; was 1/4/2/7. 378. boundedness to be allowed with any tension, and one-sidedly. 379. eliminate coordinate nodes in path lists by passing angles instead (JDH). 380. known_pair to free cur_exp after error msgs that might showdependencies. 381. scan_primary sometimes accessed num before it had a value (found by Pavel). 382. invalid characters should cause error message (suggested by PMB). Version 0.4 [October 12] 383. allow `0' in response to error prompts. 384. put loop value on error context lines. 385. change `ord' to `ASCII'. 386. scantokens to be permitted; readterminal goes away. 387. expandafter to be permitted. 388. improved overflow conventions on make_fraction, make_scaled. 389. variable= should get its own error message. 390. nice_pair first argument can be any integer. 391. new feature, shortshow commands that don't pause. 392. "harmless" bug in negate_edges, the sorted list can get out of sorts. 393. ni too skimpy (15 instead of 63). (JDH) 394. loop_ptr not initialized. (found by Paul Richards) 395. bug in , q=null should goto done1. (Richards) 396. empty_edges macro added for readability. 397. x_reflect_edges might as well fix the offset as it goes. 398. blunder: frozen_bad_vardef had the wrong eq_type. 399. "name" changed to "tag". 400. check_arith inserted after division of numeric tokens. 401. stop_bit was not initialized in . 402. char 127 to be a string of length 1; slow_print added (therefore). 403. pyth_sub added to the repertoire. 404. minor change to calls on "confusion" in make_fraction, make_scaled. (JJW) Version 0.5 [November 9] 405. 4095.999999 should be erroneous. 406. length to give the absolute value; argd changed to "angle". 407. get_next changed to get_x_next wherever possible. 408. z1..z2{curl 0} should be equivalent to z1..{curl 0}z2. 409. scantokens "" should be fast. 410. allow undelimited suffix and text parameters. 411. warningcheck to allow large variable values passed over silently. 412. "edges" changed to "picture". 413. "winding" changed to "turning". 414. had typo, "p" for "q". 415. elliptical pens should have axis symmetry. 416. slow_add introduced to catch arithmetic overflow on addition. 417. add a turningnumber primitive. 418. no carriage return between ">>" and "Edge structure...". 419. install new memory management routines (from TeX version 1.3). 420. generalized cull command. (suggested by Bruce Leban) 421. bad goto: `x..' reports that x is vacuous, loses value of x. 422. shortshows replaced by an internal variable "showstopping". 423. major change, capsule tokens: lots of code and restrictions gone! (JDH) 424. substring(a,b), subpath(a,b) to reverse the result when a>b. 425. new GF format: z goes away. (suggested by ALS) 426. another GF mod: chardw replaced by chardx/chardy, which are scaled. (PMB) 427. make `&' have the same precedence always (not different for strings). 428. wrong error message for 2"s" (bug introduced in change 369). 429. variable l in show_context has to be declared type integer. 430. bug in chop_path when both limits are large. Version 0.6 [December 10] 431. xoffset and yoffset to be added by shipout. [this affects GF comments] 432. wake_up_terminal, not t_open_out, before "Ouch..." (Scott Robinson) 433. undelimited suffix parameters to allow an optional delimiter, disallow =. 434. showall... to be eliminated; tracingcapsules added. 435. allow undelimited parameters after delimited ones. 436. nullpen test in addto should test for any one-point pen. 437. granularity parameter to affect autorounding (Bruce Leban) [this leads to major improvements suggested by JDH; lots of code changes!] [basically, make_spec is now responsible for autorounding; fill_spec just fills] 438. node_size overflow problem must be prevented. (Paul Richards) 439. allow unary + with a picture. 440. nullpen should transform quickly to itself, if not shifted. 441. print_edges should skip over null rows, if it doesn't already. 442. open_base_file improved (following TeX's change number 302). 443. output initialization improved (following TeX's change number 303). 444. operators shouldn't fail because future pen isn't a pen. (JDH) 445. intersection routine to quit in hard cases. (DRF) 446. angle routine was off by epsilon on negative arguments. (Karney) 447. octant assignment should look ahead further in ambiguous cases. (JDH) 448. forgot that right_type(r)=endpoint could happen. 449. turning_number calculated directly, not times 8. 450. floor_scaled made more efficient by trading subtraction for multiplication. 451. doublepath autorounding to compromise between east and west. (JDH) 452. codes of picture_type and path_type interchanged, to simplify a "case". Version 0.7 [January 17, 1985] 453. def to allow both := and =. (NB) 454. "keeping" and "dropping" instead of "including" and "excluding". (HWT) 455. (see the transcript...): why, when tracingonline>0? 456. dead cubics need to be removed also before xy_round. (NB) 457. [re 433] I said get_x_next twice; a blunder. Version 0.75 [January 23, 1985] 458. Abbreviated boc command makes GF format more attractive for lowres. (GusF) Version 0.76 [February 2] 459. known and unknown might as well both be primitive. 460. ab_vs_cd(a-d,b,c-b,d) simplifies to ab_vs_cd(a,b,c,d). (JDH) 461. (from change 435) must use k, not n. 462. (from change 458) max_new_row added, since 165 wasn't updated to 164. Version 0.77 [February 16] 463. abbreviated version of tracingspecs is desired for turning number errors. 464. improved octant number in pathological cases of quadrant_subdivide (JDH) 465. xoffset,yoffset communicated to GF file when proofing>0. 466. Poirot changed to Marple. 467. reverse starts the reversed path at the wrong time. 468. Extra help given after `undefined coordinate' errors. 469. Keep segment numbers from overflowing max_halfword. (JDH) 470. Ditto for pen offset slope numbers. 471. n_magic had min_halfword with wrong sign. (John Johnson) Version 0.80 [April 1] 472. In errhelp, % means , %% means %. (BPL) 473. tracing of envelopes should give symbolic octant names. 474. (-x mod y) should be ((-x) mod y) in good_val. 475. crossingpoint could overflow on 32-bit machines. (BPL) 476. Improvements to abbreviated format of number 463. Version 0.81 [April 4] 477. `I hide(showdependencies)' in hint to become `I ???'. 478. print_strange shouldn't wake up the terminal in scroll mode. (cf 463) 479. flush_list procedure made a bit faster. (DRF) 480. bounded velocities to be multiplied by .999 for safety. 481. Detect error in declaration that tries to extend a vardef. 482. print_strange puts turns in parentheses (cf 463). 483. make_name_string shouldn't ever cause string space overflow. 484. allow xscaled m yscaled n. 485. checksum should consider values relative to designsize. (DRF) [I also increased max_strings to 2000.] [Note: Neenie found a case where missing pixels can occur, due to inconsistent rounding between left-to-right and right-to-left subdivision: pickup pencircle; draw (0,126)..controls (130.29451,126) and (288,126.00002) ..(288,36)..controls (288,143.99998) and (132.97438,144) ..(0,144)..controls (0,138) and (0,132) ..cycle; The "right" way to fix this would be to develop a make_spec routine for non-cycles, and to copy a reversed spec, so that double paths would be guaranteed self-inverse. However, my later experiments showed that autorounding wasn't nearly as useful as I had expected it to be, hence I decided not to waste time beefing up this routine; no satisfactory automatic approach to rounding occurs to me.] Version 0.90 [May 10] 486. 180-degree turns to be clockwise for half of doublepath cycles. 487. introduce fillin parameter. 488. `numeric_type' moved before `known', so that print_exp works (Richards). 489. numeric_type as unary op should include independent in its range (cf 346). Version 0.91 [May 13] 490. show_token_list gets null_tally parameter. 491. if bad>0, change the code as in TeX changes 315, 316. 492. batchmode change as in TeX 317. 493. "and double autorounding" to be traced, if appropriate. 494. introduce tracingrestores. *`restoring a bad variable'? 495. put decimal number into gf extension 496. mediation put into scan_primary, so that round .5[a,b] works properly. 497. cubic_intersection now has |tol| to compensate for rounding errors. 498. find_direction_time needs to worry about degenerate case x3=y3=0. 499. crossing_point(a,b,0) now yields fraction_one if a,b>0. 500. diag_round shouldn't insist that b-a is even (see below). 501. macro_call will show_macro with much larger limit. 502. TFM file statistics are logged too. * Here's an example (found by Neenie) explaining bugfix 500: autorounding:=2; draw (7.03159,-9.31831)..controls (12.14732,-9.4386) and (17.4299,-6.82948) ..(21.60132,0)..controls (27.47417,9.61507) and (37.87402,15.58647) ..(43.74687,25.20154)..controls (51.16223,37.34201) and (57.31,50.171) ..(63.45776,63.00002) withpen pencircle; The missing pixels are due to the following curious circumstances: (1) the middle cubic splits into three, when subdividing into octants; (2) the reverse curve splits too but with slightly different rounding, off by 1; (3) the old diag_round routine, when it ensures that b-a is even, computes aa=a+1 on one side of the curve, but aa=a-1 on the other side, thus making the rounding "safe" on only one side. (Namely, on one side we have consecutive values b=1317666 a=1310720 b=1329617 a=1310721 and on the other side, b=-1329618 a=-1310720 b=-1317667 a=-1310721.) * Here's an example (by JDH) showing the necessary of bugfix 497: path p[]; p1 = (1,0)..controls (1,0.10493) and (0.98347,0.20921) ..(0.95105,0.30902)..controls (0.91862,0.40881) and (0.8707,0.50288) ..(0.80902,0.58778); p2 = (0,0)..controls (0.63403,0.20601) and (1.26807,0.41203) ..(1.9021,0.61804); show p1 intersectiontimes p2; % (-1,-1), without `tol' pickup pencircle; currenttransform := identity scaled 150; draw p1; draw p2; showit; % but they clearly intersect Version 0.95 [Aug 12] 503. `Se' changed to `SSE', etc. (suggested by RFS) 504. Inconsisting diagonal rounding was introduced in bugfix 500. [the following lines from @ in diag_round: if aa>bb then cc:=dd-half(aa-bb-1)@+else cc:=dd-half(aa-bb+1) if a>b then c:=d-half(a-b-1)@+else c:=d-half(a-b+1) were replaced respectively by: if right_type(p)>switch_x_and_y then cc:=dd-half(aa-bb+1) else cc:=dd-half(aa-bb-1) if right_type(p)>switch_x_and_y then c:=d-half(a-b-1) else c:=d-half(a-b+1) in order to make the rounding consistent on adjacent octants; the following command caused `this can't happen': fill (33,7)..controls (32.63094,5.70827) and (32.06163,3.716) ..(31.59488,3.36667)..controls (31.10509,3.00009) and (29.14824,3) ..(27.85318,3)..controls (27.85286,3) and (23.84952,3) ..(23.8492,3)..controls (23.73282,2) and (23.61646,1) ..(23.50008,0)..controls (26.66672,0) and (29.83336,0) ..(33,0)..controls (33.66667,2.33333) and (34.33333,4.66667) ..(35,7)..controls (34.33333,7) and (33.66667,7) ..cycle;] Version 0.96 [Aug 17] 505. allow comparison of transforms. [test by trying t=t when t is new...] 506. {restoring...} shouldn't get through when tracingonline=0. 507. better error message needed on `interim alpha:=0', `interim 0:=0'. 508. make_op_def should put parameters in the other order. 509. should say get_x_next, not get_next. 510. unif_rand to allow negative x, save on error messages. 511. tidy up chop_string when b<0 and/or a>l. 512. randomseed is automatically logged. 513. change 495 messed up if gf file couldn't be opened. (found by DRF) [In INIMF.CH, 3-character extensions now have 0--9 or A--Z as leading digit.] Version 0.97 [Sep 5] 514. a[b,c] to be tried only if a is numeric type. 515. simplified the code for length_op(string_type). 516. citations of `Chapter xx' now replaced by correct references. 517. to be in stat...tats version only. 518. remove extra space after and . 519. offsets should be included in the tracingoutput output. 520. a vacuous expression should be considered known. 521. charlist syntax changed from commas to colons. [also the WAITS version command-line reader was fixed to handle `^^W'] Version 0.99 [Sep 24] 522. vardef's begingroup...endgroup should be accessible. 523. allow an empty expression in for loops. Version 0.999 [Oct 1] 524. "charfam" changed to "charext". 525. variable tt makes get_node slightly faster. (PROFILE suggests this) 526. cur_cmd<=max should be tested before cur_cmd>=min. (PROFILE) 527. fast_get_avail used in cur_tok and scan_primary. (PROFILE) Version 0.9999 [Oct 27] 528. Major change to representation of independent variables ("serial number" added so that MF's equation solving doesn't depend on vagaries of storage allocation) [module number change: new module between old 585 and 586] [in terms of new numbering, modules 232, 585--587, 589, 594, 597, 601, 608, 610, 816--817, 855, 1198--1199 were affected] [I also reordered some of the cases in print_op, module 189, so that the program could be condensed in published version] Version 0.99999 [Nov 13] 529. forgot to decrease three_l in change 497! 530. cubic_intersection to give approximation if max_patience exceeded. [the following example, found by NB, motivated this change: show ( (36.00104,26.99951)..controls (36.00131,26.99979) and (36.00146,27.00017) ..(36.00146,27.00055) )intersectiontimes( (36,27.00055)..controls (45.17148,21.12364) and (55.83588,18) ..(66.72873,18) );] Version 0.999999 [Dec 2] 531. hold_head needed (scan_toks calls cur_tok calls copy_edges). (D. Kosower) Version 1.0 [January 4, 1986] 532. Optimization in module 1174, suggested by LER (3 Feb 86) @x if delta=0 then gf_out(skip0) else begin gf_out(skip1); gf_out(delta); end @y begin gf_out(skip1); gf_out(delta); end @z *** Late copies of version 1.0 include this correction; in particular, the program listing in Volume D was updated (with scissors)! Changes subsequent to `Version 1.0' as published in C&T, Volume D: 533. Inconsistent punctuation in user messages (found by Karl Berry, June 86) @x module 1134 print_nl("Font metrics written on "); print(metric_file_name); @y print_nl("Font metrics written on "); print(metric_file_name); print_char("."); @z (that was installed in version 1.1) 534. Possible arithmetic overflows (found by Klaus Guntermann, July 86) @x module 496 while max_coef; @y internal[fontmaking]:=0; {avoid loop in case of fatal error} @; @z (that too was installed in version 1.2) 536. Double rounding error should be avoided in make_ellipse (JDH, 22 Nov 86) @x module 533 d:=take_fraction(d,delta); alpha:=abs(u); beta:=abs(v); if alpha0 then d:=d-take_fraction(internal[fillin],beta+beta); d:=(d+4) div 8; alpha:=alpha div half_unit; @y alpha:=abs(u); beta:=abs(v); if alpha0 then d:=d-take_fraction(internal[fillin],make_fraction(beta+beta,delta)); d:=take_fraction((d+4) div 8,delta); alpha:=alpha div half_unit; @z (That was the reason for version 1.3) 537. Trivial change to a help message (version number is still 1.3). @x module 1086 ("Pretend that you're Miss Marple, examine all clues,")@/ @y ("Pretend that you're Miss Marple: Examine all clues,")@/ @z 538. Storage allocation can be more elegant and efficient (4/21/87) @x module 169 if r=p then if ((rlink(p)<>rover) or (llink(p)<>rover)) then @y if r=p then if rlink(p)<>p then @z 539. Unused variables can be eliminated. (Found by John Sauter, 5/5/87) @x module 158 @= @!temp_ptr:pointer; {a pointer variable for occasional emergency use} @y (I used it only in my change file!) @z @x module 280 @!r,@!s,@!t:pointer; {registers for list traversal} @y @!s,@!t:pointer; {registers for list traversal} @z @x module 284 @!sine,@!cosine:fraction; {trig functions of various angles} @y (the declarations in module 281 are correct, but in 284 they're superfluous) @z @x module 497 var @!q,@!ww:pointer; {for list manipulation} @!du,@!dv:scaled; {for slope calculation} @!t0,@!t1,@!t2:integer; {test coefficients} @!t:fraction; {place where the derivative passes a critical slope} @!s:fraction; {slope or reciprocal slope} @!v:integer; {intermediate value for updating |x0..y2|} begin loop begin q:=link(p); right_type(p):=k; @y var @!ww:pointer; {for list manipulation} @!du,@!dv:scaled; {for slope calculation} @!t0,@!t1,@!t2:integer; {test coefficients} @!t:fraction; {place where the derivative passes a critical slope} @!s:fraction; {slope or reciprocal slope} @!v:integer; {intermediate value for updating |x0..y2|} begin loop begin right_type(p):=k; @z @x module 652 @!s:0..param_size; {value of |param_start| on the current level} @y who knows why that line was there? @z @x module 862 var @!p,@!q,@!r:pointer; {for list manipulation} @y var @!p:pointer; {for list manipulation} @z @x module 985 @!vv:scaled; {initial value of |v|} @!q:pointer; {successor of |p|} begin vv:=v; p:=cur_exp;@/ @y @!q:pointer; {successor of |p|} begin p:=cur_exp;@/ @z @x module 1059 @!t:small_number; {variant of |with_option|} @y @z 540. Typo suppresses an error detection (Chris Thompson, 2May88) @x module 963 if txy mod unity=0 then if tyy mod unity=0 then @y if txx mod unity=0 then if tyy mod unity=0 then @z 541. get_x_token can lose a scanned declared variable (Chris Thompson, 4May88) @x module 1011 if equiv(x)=null then new_root(x); @y @z @x module 1011 done:scan_declared_variable:=h; @y done: if eq_type(x)<>tag_token then clear_symbol(x,false); if equiv(x)=null then new_root(x); scan_declared_variable:=h; @z 542. Avoid negative divisor rounding upward (Chris Thompson, fixed 19Jun88) @x module 168 else t:=(lo_mem_max+hi_mem_min+2) div 2; {|lo_mem_max+2<=t=1998 then t:=lo_mem_max+1000 @z 544. Avoid fatal_error after terminal eof (Tim Morgan, reported 25Oct88) @x module 66 [serious problem occurred if this was called in open_log_file] if not input_ln(term_in,true) then fatal_error("End of file on the terminal!"); @y if not input_ln(term_in,true) then t_open_in; @z 545. Force terminal output when open_log_file aborts (6Nov88) @x module 789 begin print_err("I can't write on file `"); @y begin selector:=term_only; print_err("I can't write on file `"); @z 546. By popular request, undo #544 and fix the bug a more complex way. @x module 66 [this undoes change #544] if not input_ln(term_in,true) then t_open_in; @y if not input_ln(term_in,true) then fatal_error("End of file on the terminal!"); @z @x module 87 [now we get to the new stuff] begin if job_name>0 then selector:=term_and_log @y begin if log_opened then selector:=term_and_log @z @x module 88 error; @y if log_opened then error; @z @x module 782 @!job_name:str_number; {principal file name} @y @!job_name:str_number; {principal file name} @!log_opened:boolean; {has the transcript file been opened?} @z @x module 783 @=job_name:=0; @y @=job_name:=0; log_opened:=false; @z @x module 788 selector:=log_only; @y selector:=log_only; log_opened:=true; @z @x module 789 begin if interaction print_file_name(cur_name,cur_area,cur_ext); print("'.");@/ job_name:=0; history:=fatal_error_stop; jump_out; end; {abort the program without a log file} @y begin selector:=term_only; @z @x module 1023 [this change is optional, but it's a slight improvement] if job_name<>0 then selector:=selector+2; @y if log_opened then selector:=selector+2; @z @x module 1205 if job_name>0 then @y if log_opened then @z @x module 1208 if job_name>0 then {the log file is open} @y if log_opened then @z 547. String startup problems corresponding to TeX change 355 (17 Jul 89) @x module 30 (Warning: This affects most change files!) overflow("buffer size",buf_size); @:METAFONT capacity exceeded buffer size}{\quad buffer size@> @y @; @z @x module 34 consist of the remainder of the command line, after the part that invoked \MF. @y consist of the remainder of the command line, after the part that invoked \MF. The first line is special also because it may be read before \MF\ has input a base file. In such cases, normal error messages cannot yet be given. The following code uses concepts that will be explained later. @= if base_ident=0 then begin write_ln(term_out,'Buffer size exceeded!'); goto final_end; @.Buffer size exceeded@> end else begin cur_input.loc_field:=first; cur_input.limit_field:=last-1; overflow("buffer size",buf_size); @:METAFONT capacity exceeded buffer size}{\quad buffer size@> end @z @x module 1193 k:=pool_ptr-4; undump_four_ASCII @y k:=pool_ptr-4; undump_four_ASCII; init_str_ptr:=str_ptr; init_pool_ptr:=pool_ptr;@/ max_str_ptr:=str_ptr; max_pool_ptr:=pool_ptr @z @x module 1204 tini@/ @y init_str_ptr:=str_ptr; init_pool_ptr:=pool_ptr;@/ max_str_ptr:=str_ptr; max_pool_ptr:=pool_ptr; fix_date_and_time; tini@/ @z @x module 1204 init_str_ptr:=str_ptr; init_pool_ptr:=pool_ptr;@/ max_str_ptr:=str_ptr; max_pool_ptr:=pool_ptr;@/ @y @z 548. Major changes to allow 8-bit input, cf. TeX82 #359 (11 Sep 89). @x module 18 @!ASCII_code=0..127; {seven-bit numbers} @y @!ASCII_code=0..255; {eight-bit numbers} @z @x module 19 @d last_text_char=127 {ordinal number of the largest element of |text_char|} @= @!i:0..last_text_char; @y @d last_text_char=255 {ordinal number of the largest element of |text_char|} @= @!i:integer; @z @x module 21 xchr[0]:=' '; xchr[@'177]:=' '; {ASCII codes 0 and |@'177| do not appear in text} @y @z @x module 22 for i:=1 to @'37 do xchr[i]:=' '; @y changing ' ' to chr(i) here will allow all 8-bit characters to get in for i:=0 to @'37 do xchr[i]:=' '; for i:=@'177 to @'377 do xchr[i]:=' '; @z @x module 23 for i:=1 to @'176 do xord[xchr[i]]:=i; @y for i:=@'200 to @'377 do xord[xchr[i]]:=i; for i:=0 to @'176 do xord[xchr[i]]:=i; @z @x module 37 @= @!pool_pointer = 0..pool_size; {for variables that point into |str_pool|} @!str_number = 0..max_strings; {for variables that point into |str_start|} @ @= @!str_pool:packed array[pool_pointer] of ASCII_code; {the characters} @y [OK to make si(#)==#-128 and so(#)==#+128 (without parens) in change files] Some \PASCAL\ compilers won't pack integers into a single byte unless the integers lie in the range |-128..127|. To accommodate such systems we access the string pool only via macros that can easily be redefined. @d si(#) == # {convert from |ASCII_code| to |packed_ASCII_code|} @d so(#) == # {convert from |packed_ASCII_code| to |ASCII_code|} @= @!pool_pointer = 0..pool_size; {for variables that point into |str_pool|} @!str_number = 0..max_strings; {for variables that point into |str_start|} @!packed_ASCII_code = 0..255; {elements of |str_pool| array} @ @= @!str_pool:packed array[pool_pointer] of packed_ASCII_code; {the characters} @z @x module 41 begin str_pool[pool_ptr]:=#; incr(pool_ptr); @y begin str_pool[pool_ptr]:=si(#); incr(pool_ptr); @z @x module 45 begin if str_pool[j]<>buffer[k] then @y begin if so(str_pool[j])<>buffer[k] then @z @x module 47 var k,@!l:0..127; {small indices or counters} @y var k,@!l:0..255; {small indices or counters} @z @x module 47 @; @y @; @z @x module 48 @ @= for k:=0 to 127 do begin if (@) then begin append_char("^"); append_char("^"); if k<@'100 then append_char(k+@'100) else append_char(k-@'100); @y @ @d app_lc_hex(#)==l:=#; if l<10 then append_char(l+"0)@+else append_char(l-10+"a") @= for k:=0 to 255 do begin if (@) then begin append_char("^"); append_char("^"); if k<@'100 then append_char(k+@'100) else if k<@'200 then append_char(k-@'100) else begin app_lc_hex(k div 16); app_lc_hex(k mod 16); end; @z @x module 59 begin print_char(str_pool[j]); incr(j); @y begin print_char(so(str_pool[j])); incr(j); @z @x module 60 begin print(str_pool[j]); incr(j); @y begin print(so(str_pool[j])); incr(j); @z @x module 85 begin if str_pool[j]<>"%" then print(str_pool[j]) else if j+1=str_start[err_help+1] then print_ln else if str_pool[j+1]<>"%" then print_ln @y begin if str_pool[j]<>si("%") then print(so(str_pool[j])) else if j+1=str_start[err_help+1] then print_ln else if str_pool[j+1]<>si("%") then print_ln @z @x module 199 char_class[127]:=invalid_class; @y for k:=127 to 255 do char_class[k]:=invalid_class; @z @x module 200 @d hash_is_full == (hash_used=1) {test if all positions are occupied} @d eq_type(#) == eqtb[#].lh {the current ``meaning'' of a symbolic token} @d equiv(#) == eqtb[#].rh {parametric part of a token's meaning} @d hash_base=129 {hashing actually starts here} @y [incidentally I fixed a bug re hash overflow here] @d eq_type(#) == eqtb[#].lh {the current ``meaning'' of a symbolic token} @d equiv(#) == eqtb[#].rh {parametric part of a token's meaning} @d hash_base=257 {hashing actually starts here} @d hash_is_full == (hash_used=hash_base) {are all positions occupied?} @z @x module 210 for j:=0 to l-1 do buffer[j]:=str_pool[k+j]; cur_sym:=id_lookup(0,l);@/ if s>=128 then {we don't want to have the string twice} @y for j:=0 to l-1 do buffer[j]:=so(str_pool[k+j]); cur_sym:=id_lookup(0,l);@/ if s>=256 then {we don't want to have the string twice} @z @x module 223 begin c:=char_class[str_pool[str_start[r]]]; @y begin c:=char_class[so(str_pool[str_start[r]])]; @z @x module 717 begin buffer[first]:=str_pool[j]; incr(j); incr(first); @y begin buffer[first]:=so(str_pool[j]); incr(j); incr(first); @z @x module 774 for j:=str_start[a] to str_start[a+1]-1 do append_to_name(str_pool[j]); for j:=str_start[n] to str_start[n+1]-1 do append_to_name(str_pool[j]); for j:=str_start[e] to str_start[e+1]-1 do append_to_name(str_pool[j]); @y for j:=str_start[a] to str_start[a+1]-1 do append_to_name(so(str_pool[j])); for j:=str_start[n] to str_start[n+1]-1 do append_to_name(so(str_pool[j])); for j:=str_start[e] to str_start[e+1]-1 do append_to_name(so(str_pool[j])); @z @x module 912 else begin cur_exp:=round_unscaled(cur_exp) mod 128; cur_type:=string_type; if cur_exp<0 then cur_exp:=cur_exp+128; @y else begin cur_exp:=round_unscaled(cur_exp) mod 256; cur_type:=string_type; if cur_exp<0 then cur_exp:=cur_exp+256; @z @x module 913 else n:=str_pool[str_start[cur_exp]] @y else n:=so(str_pool[str_start[cur_exp]]) @z @x ibid begin m:=str_pool[k]; @y begin m:=so(str_pool[k]); @z @x module 976 for k:=str_start[a] to str_start[a+1]-1 do append_char(str_pool[k]); for k:=str_start[b] to str_start[b+1]-1 do append_char(str_pool[k]); @y for k:=str_start[a] to str_start[a+1]-1 do append_char(so(str_pool[k])); for k:=str_start[b] to str_start[b+1]-1 do append_char(so(str_pool[k])); @z @x module 977 for k:=str_start[s]+b-1 downto str_start[s]+a do append_char(str_pool[k]) else for k:=str_start[s]+a to str_start[s]+b-1 do append_char(str_pool[k]); @y for k:=str_start[s]+b-1 downto str_start[s]+a do append_char(so(str_pool[k])) else for k:=str_start[s]+a to str_start[s]+b-1 do append_char(so(str_pool[k])); @z @x module 1103 begin c:=str_pool[str_start[cur_exp]]; goto found; @y begin c:=so(str_pool[str_start[cur_exp]]); goto found; @z @x module 1160 for k:=str_start[s] to str_start[s+1]-1 do gf_out(str_pool[k]); end; if t<>0 then for k:=str_start[t] to str_start[t+1]-1 do gf_out(str_pool[k]); @y for k:=str_start[s] to str_start[s+1]-1 do gf_out(so(str_pool[k])); end; if t<>0 then for k:=str_start[t] to str_start[t+1]-1 do gf_out(so(str_pool[k])); @z @x module 1192 w.b0:=str_pool[k]; w.b1:=str_pool[k+1]; w.b2:=str_pool[k+2]; w.b3:=str_pool[k+3]; @y [often qi(so(x))=x, but not e.g. when "quarterwords" are two bytes] w.b0:=qi(so(str_pool[k])); w.b1:=qi(so(str_pool[k+1])); w.b2:=qi(so(str_pool[k+2])); w.b3:=qi(so(str_pool[k+3])); @z @x module 1193 str_pool[k]:=w.b0; str_pool[k+1]:=w.b1; str_pool[k+2]:=w.b2; str_pool[k+3]:=w.b3 @y str_pool[k]:=si(qo(w.b0)); str_pool[k+1]:=si(qo(w.b1)); str_pool[k+2]:=si(qo(w.b2)); str_pool[k+3]:=si(qo(w.b3)) @z 549. Make ".base" more easily switchable (see TeX82 log #369). @x module 775 gets a new definition @y @d base_extension=".base" {the extension, as a \.{WEB} constant} @z now replace ".base" by base_extension in modules 784 and 1200. 550. "This can't happen" happened because of nonmonotonic rounding (bug found by Mark Eklof, fixed 7 Oct 89) @x module 411 left_x(r):=x_coord(r); @y left_x(r):=x_coord(r); if right_x(p)>x_coord(r) then right_x(p):=x_coord(r); {we always have |x_coord(p)<=right_x(p)|} @z @x ibid else if x_coord(r)>dest_x then x_coord(r):=dest_x; @y else begin if x_coord(r)>dest_x then begin x_coord(r):=dest_x; left_x(r):=-x_coord(r); right_x(r):=x_coord(r); end; if left_x(q)>dest_x then left_x(q):=dest_x else if left_x(q)x_coord(s) then left_x(q):=-x_coord(s) else negate(left_x(q)); negate(x_coord(s)); right_x(s):=x_coord(s); @z @x module 415 if x_coord(r)>dest_x then x_coord(r):=dest_x else if x_coord(r)y_coord(r) then right_y(pp):=y_coord(r); {we always have |y_coord(pp)<=right_y(pp)|} @z @x ibid else if y_coord(r)>dest_y then y_coord(r):=dest_y; @y else begin if y_coord(r)>dest_y then begin y_coord(r):=dest_y; left_y(r):=-y_coord(r); right_y(r):=y_coord(r); end; if left_y(qq)>dest_y then left_y(qq):=dest_y else if left_y(qq)dest_x then x_coord(s):=dest_x else if x_coord(s)y_coord(s) then left_y(qq):=-y_coord(s) else negate(left_y(qq)); negate(y_coord(s)); right_y(s):=y_coord(s); @z @x module 424 if y_coord(r)>dest_y then y_coord(r):=dest_y else if y_coord(r)dest_x+dest_y then begin y_coord(r):=dest_x+dest_y-x_coord(p); if left_y(r)>y_coord(r) then begin left_y(r):=y_coord(r); if right_y(p)>y_coord(r) then right_y(p):=y_coord(r); end; end; if x_coord(r)dest_x+dest_y then x_coord(r):=dest_x+dest_y-y_coord(r); left_x(r):=x_coord(r); if right_x(p)>x_coord(r) then right_x(p):=x_coord(r); {we always have |x_coord(p)<=right_x(p)|} y_coord(r):=y_coord(r)+x_coord(r); right_y(r):=right_y(r)+x_coord(r);@/ negate(x_coord(r)); right_x(r):=x_coord(r);@/ left_y(q):=left_y(q)+left_x(q); negate(left_x(q));@/ dest_y:=dest_y+dest_x; negate(dest_x); if right_y(r)>dest_y then right_y(r):=dest_y; if left_y(q)>dest_y then left_y(q):=dest_y else if left_y(q)left_y(q) then right_y(r):=left_y(q); @z @x ibid else if x_coord(r)>dest_x then x_coord(r):=dest_x @y else begin if x_coord(r)>dest_x then begin x_coord(r):=dest_x; left_x(r):=-x_coord(r); right_x(r):=x_coord(r); end; if left_x(q)>dest_x then left_x(q):=dest_x else if left_x(q)= begin split_cubic(r,t,dest_x,dest_y); s:=link(r);@/ if x_coord(r)+y_coord(s)>dest_x+dest_y then begin y_coord(s):=dest_x+dest_y-x_coord(r); if left_y(s)>y_coord(s) then begin left_y(s):=y_coord(s); if right_y(r)>y_coord(s) then right_y(r):=y_coord(s); end; end; if x_coord(s)+y_coord(s)>dest_x+dest_y then x_coord(s):=dest_x+dest_y-y_coord(s) else begin if x_coord(s)x_coord(s) then begin left_y(q):=left_y(q)+x_coord(s); left_x(q):=-x_coord(s);@+end else begin left_y(q):=left_y(q)+left_x(q); negate(left_x(q));@+end; y_coord(s):=y_coord(s)+x_coord(s); right_y(s):=right_y(s)+x_coord(s);@/ negate(x_coord(s)); right_x(s):=x_coord(s);@/ dest_y:=dest_y+dest_x; if right_y(s)>dest_y then right_y(s):=dest_y; if left_y(q)>dest_y then left_y(q):=dest_y else if left_y(q)left_y(q) then right_y(s):=left_y(q); end @z 551. Major change for extended ligatures. @x module 11 (this may affect change files) @!lig_table_size=300; {maximum number of ligature/kern steps} @y @!lig_table_size=5000; {maximum number of ligature/kern steps, must be at least 255 and at most 32510} @!max_kerns=500; {maximum number of distinct kern amounts} @z @x module 14 gets a new line of code @y if(lig_table_size<255)or(lig_table_size>32510)then bad:=7; @z @x module 186 @d lig_kern_token=76 {the operators `\&{kern}' and `\.{=:}'} @d assignment=77 {the operator `\.{:=}'} @d colon=78 {the operator `\.:'} @# @d comma=79 {the operator `\.,'} @d end_of_statement==cur_cmd>comma @d semicolon=80 {the operator `\.;', must be |comma+1|} @d end_group=81 {end a group (\&{endgroup}), must be |semicolon+1|} @d stop=82 {end a job (\&{end}, \&{dump}), must be |end_group+1|} @y @d lig_kern_token=76 {the operators `\&{kern}' and `\.{=:}' and `\.{=:\char'174}, etc.} @d assignment=77 {the operator `\.{:=}'} @d skip_to=78 {the operation `\&{skipto}'} @d bchar_label=79 {the operator `\.{\char'174\char'174:}'} @d double_colon=80 {the operator `\.{::}'} @d colon=81 {the operator `\.:'} @# @d comma=82 {the operator `\.,', must be |colon+1|} @d end_of_statement==cur_cmd>comma @d semicolon=83 {the operator `\.;', must be |comma+1|} @d end_group=84 {end a group (\&{endgroup}), must be |semicolon+1|} @d stop=85 {end a job (\&{end}, \&{dump}), must be |end_group+1|} @z @x module 190 @d max_given_internal=warning_check @y @d boundary_char=41 {the right boundary character for ligatures} @d max_given_internal=41 @z @x module 192 gets two new lines of code @y primitive("boundarychar",internal_quantity,boundary_char);@/ @!@:boundary_char_}{\&{boundarychar} primitive@> @z @x and module 193 gets one too @y int_name[boundary_char]:="boundarychar"; @z @x and module 211 gets several @y (to be inserted in appropriate places) primitive("::",double_colon,0); @!@::: }{\.{::} primitive@> primitive("||:",bchar_label,0); @!@:::: }{\.{\char'174\char'174:} primitive@> primitive("skipto",skip_to,0);@/ @!@:skip_to_}{\&{skipto} primitive@> @z @x as does module 212 @y bchar_label:print("||:"); double_colon:print("::"); skip_to:print("skipto"); @z @x module 1093 has new text (see TeX change 362 for module 545) and also this: @d stop_bit(#)==lig_kern[#].b0 @d next_char(#)==lig_kern[#].b1 @d op_bit(#)==lig_kern[#].b2 @y @d skip_byte(#)==lig_kern[#].b0 @d next_char(#)==lig_kern[#].b1 @d op_byte(#)==lig_kern[#].b2 @z @x module 1096 gets a new definition @y @d undefined_label==lig_table_size {an undefined local label} @z @x ...and some changed declarations @!char_remainder:array[eight_bits] of eight_bits; {the |remainder| byte} @!header_byte:array[1..header_size] of -1..255; {bytes of the \.{TFM} header, or $-1$ if unset} @!lig_kern:array[0..lig_table_size] of four_quarters; {the ligature/kern table} @!nl:0..lig_table_size; {the number of ligature/kern steps so far} @!kern:array[eight_bits] of scaled; {distinct kerning amounts} @!nk:0..256; {the number of distinct kerns so far} @y @!char_remainder:array[eight_bits] of 0..lig_table_size; {the |remainder| byte} @!header_byte:array[1..header_size] of -1..255; {bytes of the \.{TFM} header, or $-1$ if unset} @!lig_kern:array[0..lig_table_size] of four_quarters; {the ligature/kern table} @!nl:0..32767-256; {the number of ligature/kern steps so far} @!kern:array[0..max_kerns] of scaled; {distinct kerning amounts} @!nk:0..max_kerns; {the number of distinct kerns so far} @z @x ...and some new declarations @y @!skip_table:array[eight_bits] of 0..lig_table_size; {local label status} @!lk_started:boolean; {has there been a lig/kern step in this command yet?} @!bchar:integer; {right boundary character} @!bch_label:0..lig_table_size; {left boundary starting location} @!ll,@!lll:0..lig_table_size; {registers used for lig/kern processing} @!label_loc:array[0..256] of -1..lig_table_size; {lig/kern starting addresses} @!label_char:array[1..256] of eight_bits; {characters for |label_loc|} @!label_ptr:0..256; {highest position occupied in |label_loc|} @z @x module 1097 end; for k:=1 to header_size do header_byte[k]:=-1; bc:=255; ec:=0; nl:=0; nk:=0; ne:=0; np:=0; @y skip_table[k]:=undefined_label; end; for k:=1 to header_size do header_byte[k]:=-1; bc:=255; ec:=0; nl:=0; nk:=0; ne:=0; np:=0;@/ internal[boundary_char]:=-unity; bch_label:=undefined_label;@/ label_loc[0]:=-1; label_ptr:=0; @z @x module 1104 procedure set_tag(@!c:eight_bits;@!t:small_number;@!r:eight_bits); begin if char_tag[c]=no_tag then begin char_tag[c]:=t; char_remainder[c]:=r; @y procedure set_tag(@!c:halfword;@!t:small_number;@!r:halfword); begin if char_tag[c]=no_tag then begin char_tag[c]:=t; char_remainder[c]:=r; if t=lig_tag then begin incr(label_ptr); label_loc[label_ptr]:=r; label_char[label_ptr]:=c; end; @z @x module 1105 if (c>" ")and(c<128) then print(c) @y if (c>" ")and(c<127) then print(c) else if c=256 then print("||") @z @x module 1106 label continue; var @!c,@!cc:eight_bits; {character codes} @!k:0..256; {index into the |kern| array} @y label continue,done; var @!c,@!cc:0..256; {character codes} @!k:0..max_kerns; {index into the |kern| array} @z % also the previous code of module 1107 is inserted into 1106 @x modules 1107--1111 are completely replaced @y by the following new code: @ @= begin lk_started:=false; continue: get_x_next; if(cur_cmd=skip_to)and lk_started then @; if cur_cmd=bchar_label then begin c:=256; cur_cmd:=colon;@+end else begin back_input; c:=get_code;@+end; if(cur_cmd=colon)or(cur_cmd=double_colon)then @; if cur_cmd=lig_kern_token then @ else begin print_err("Illegal ligtable step"); @.Illegal ligtable step@> help1("I was looking for `=:' or `kern' here."); back_error; next_char(nl):=qi(0); op_byte(nl):=qi(0); rem_byte(nl):=qi(0);@/ skip_byte(nl):=stop_flag+1; {this specifies an unconditional stop} end; if nl=lig_table_size then overflow("ligtable size",lig_table_size); @:METAFONT capacity exceeded ligtable size}{\quad ligtable size@> incr(nl); if cur_cmd=comma then goto continue; if skip_byte(nl-1)= primitive("=:",lig_kern_token,0); @!@:=:_}{\.{=:} primitive@> primitive("=:|",lig_kern_token,1); @!@:=:/_}{\.{=:\char'174} primitive@> primitive("=:|>",lig_kern_token,5); @!@:=:/>_}{\.{=:\char'174>} primitive@> primitive("|=:",lig_kern_token,2); @!@:=:/_}{\.{\char'174=:} primitive@> primitive("|=:>",lig_kern_token,6); @!@:=:/>_}{\.{\char'174=:>} primitive@> primitive("|=:|",lig_kern_token,3); @!@:=:/_}{\.{\char'174=:\char'174} primitive@> primitive("|=:|>",lig_kern_token,7); @!@:=:/>_}{\.{\char'174=:\char'174>} primitive@> primitive("|=:|>>",lig_kern_token,11); @!@:=:/>_}{\.{\char'174=:\char'174>>} primitive@> primitive("kern",lig_kern_token,128); @!@:kern_}{\&{kern} primitive@> @ @= lig_kern_token: case m of 0:print("=:"); 1:print("=:|"); 2:print("|=:"); 3:print("|=:|"); 5:print("=:|>"); 6:print("|=:>"); 7:print("|=:|>"); 11:print("|=:|>>"); othercases print("kern") endcases; @ Local labels are implemented by maintaining the |skip_table| array, where |skip_table[c]| is either |undefined_label| or the address of the most recent lig/kern instruction that skips to local label~|c|. In the latter case, the |skip_byte| in that instruction will (temporarily) be zero if there were no prior skips to this label, or it will be the distance to the prior skip. We may need to cancel skips that span more than 127 lig/kern steps. @d cancel_skips(#)==ll:=#; repeat lll:=qo(skip_byte(ll)); skip_byte(ll):=stop_flag; ll:=ll-lll; until lll=0 @d skip_error(#)==begin print_err("Too far to skip"); @.Too far to skip@> help1("At most 127 lig/kern steps can separate skipto1 from 1::."); error; cancel_skips(#); end @= begin c:=get_code; if nl-skip_table[c]>128 then {|skip_table[c]<= begin if cur_cmd=colon then if c=256 then bch_label:=nl else set_tag(c,lig_tag,nl) else if skip_table[c]128 then begin skip_error(ll); goto continue; end; skip_byte(ll):=qi(nl-ll-1); ll:=ll-lll; until lll=0; end; goto continue; end @x module 1112 next_char(nl):=qi(c); op_bit(nl):=qi(cur_mod); stop_bit(nl):=qi(0); if cur_mod=0 then rem_byte(nl):=qi(get_code) @y begin next_char(nl):=qi(c); skip_byte(nl):=qi(0); if cur_mod<128 then {ligature op} begin op_byte(nl):=qi(cur_mod); rem_byte(nl):=qi(get_code); end @z @x ibid begin if nk=256 then overflow("kern",256); @:METAFONT capacity exceeded kern}{\quad kern@> incr(nk); end; rem_byte(nl):=qi(k); end @y begin if nk=max_kerns then overflow("kern",max_kerns); @:METAFONT capacity exceeded kern}{\quad kern@> incr(nk); end; op_byte(nl):=kern_flag+(k div 256); rem_byte(nl):=qi((k mod 256)); end; lk_started:=true; end @z @x module 1135 tfm_two(6+lh+(ec-bc+1)+nw+nh+nd+ni+nl+nk+ne+np); {this is the total number of file words that will be output} tfm_two(lh); tfm_two(bc); tfm_two(ec); tfm_two(nw); tfm_two(nh); tfm_two(nd); tfm_two(ni); tfm_two(nl); tfm_two(nk); tfm_two(ne); tfm_two(np); @y @; tfm_two(6+lh+(ec-bc+1)+nw+nh+nd+ni+nl+lk_offset+nk+ne+np); {this is the total number of file words that will be output} tfm_two(lh); tfm_two(bc); tfm_two(ec); tfm_two(nw); tfm_two(nh); tfm_two(nd); tfm_two(ni); tfm_two(nl+lk_offset); tfm_two(nk); tfm_two(ne); tfm_two(np); @z % modules 1137&1138 are combined into a single module % and so are modules 1140--1141, to make room for two new modules. @x module 1136 is moved to after old module 1141 @y and changed to the following code: @ @= if bch_label= bchar:=round_unscaled(internal[boundary_char]); if(bchar<0)or(bchar>255)then begin bchar:=-1; lk_started:=false; lk_offset:=0;@+end else begin lk_started:=true; lk_offset:=1;@+end; @; if bch_label= k:=label_ptr; {pointer to the largest unallocated label} if label_loc[k]+lk_offset>255 then begin lk_offset:=0; lk_started:=false; {location 0 can do double duty} repeat char_remainder[label_char[k]]:=lk_offset; while label_loc[k-1]=label_loc[k] do begin decr(k); char_remainder[label_char[k]]:=lk_offset; end; incr(lk_offset); decr(k); until lk_offset+label_loc[k]<256; {N.B.: |lk_offset=256| satisfies this when |k=0|} end; if lk_offset>0 then while k>0 do begin char_remainder[label_char[k]] :=char_remainder[label_char[k]]+lk_offset; decr(k); end @ @= for k:=0 to 255 do if skip_table[k] cancel_skips(skip_table[k]); end; if lk_started then {|lk_offset=1| for the special |bchar|} begin tfm_out(255); tfm_out(bchar); tfm_two(0); end else for k:=1 to lk_offset do {output the redirection specs} begin ll:=label_loc[label_ptr]; if bchar<0 then begin tfm_out(254); tfm_out(0); end else begin tfm_out(255); tfm_out(bchar); end; tfm_two(ll+lk_offset); repeat decr(label_ptr); until label_loc[label_ptr]token_list then @ else begin lhs:=cur_exp; cur_path_type:=cur_mod;@/ cur_type:=vacuous; get_x_next; scan_expression; if cur_path_type=also_code then @ @y @!add_to_type:double_path_code..also_code; {modifier of \&{addto}} begin get_x_next; var_flag:=thing_to_add; scan_primary; if cur_type<>token_list then @ else begin lhs:=cur_exp; add_to_type:=cur_mod;@/ cur_type:=vacuous; get_x_next; scan_expression; if add_to_type=also_code then @ @z @x module 1064 else begin lhs:=null; @y else begin lhs:=null; cur_path_type:=add_to_type; @z 554. Balance the parens showing on the terminal (for Lispers). @x module 631 @!in_open : 0..max_in_open; {the number of lines in the buffer, less one} @y @!in_open : 0..max_in_open; {the number of lines in the buffer, less one} @!open_parens : 0..max_in_open; {the number of open text files} @z @x module 657 in_open:=0; max_buf_stack:=0; @y in_open:=0; open_parens:=0; max_buf_stack:=0; @z @x module 681 begin print_char(")"); force_eof:=false; update_terminal; {show user that file has been read} @y begin print_char(")"); decr(open_parens); update_terminal; {show user that file has been read} force_eof:=false; @z @x module 793 print_char("("); print(name); update_terminal; @y print_char("("); incr(open_parens); print(name); update_terminal; @z @x module 1209 if job_name=0 then open_log_file; @y if job_name=0 then open_log_file; while open_parens>0 do begin print(" )"); decr(open_parens); end; @z -----------Here I draw the line with respect to further changes 555. Don't try system area if an area was given (see tex82.bug number 312; found by Jonathan Kew, May 1990) @x module 793 pack_file_name(cur_name,MF_area,cur_ext); if a_open_in(cur_file) then goto done; @y if cur_area="" then begin pack_file_name(cur_name,MF_area,cur_ext); if a_open_in(cur_file) then goto done; end; @z 556. Report correct line number when buffer overflows (CET, Jul 90). @x module 794 begin if not input_ln(cur_file,false) then do_nothing; firm_up_the_line; buffer[limit]:="%"; first:=limit+1; loc:=start; line:=1; @y begin line:=1; if input_ln(cur_file,false) then do_nothing; firm_up_the_line; buffer[limit]:="%"; first:=limit+1; loc:=start; @z 557. TeX82 bug 308, corrected in 1985, is also in MF! (Lutz Birkhahn, May91) @x module 176 var_used:=lo_mem_stat_max+1-mem_min; dyn_used:=mem_top+1-hi_mem_stat_min; @y var_used:=lo_mem_stat_max+1-mem_min; dyn_used:=mem_top+1-hi_mem_min; @z 558. Allow unprintable file names, as in TeX change 396 (19 Sep 91) (Much of this is redundant except for people who make nonportable versions that allow other 8-bit codes to be in variable names---and for those people only if they allow input of more codes than they can print! Still, it seems best to make the programs for TeX and MF as alike as possible.) @x module 59 j:=str_start[s]; while jpseudo) then print_char(s) else begin j:=str_start[s]; while jpseudo) then print_char(s) else begin j:=str_start[s]; while jnull then print(text(name)) @y if name<>null then slow_print(text(name)) @z @x module 664 if scanner_status=op_defining then print(text(warning_info)) @y if scanner_status=op_defining then slow_print(text(warning_info)) @z @x module 664 again loop_defining: begin print("the text of a "); print(text(warning_info)); @y loop_defining: begin print("the text of a "); slow_print(text(warning_info)); @z @x module 722 begin if n<>null then print(text(n)) @y begin if n<>null then slow_print(text(n)) @z @x module 722 again if p=null then print(text(info(info(link(a))))) @y if p=null then slow_print(text(info(info(link(a))))) @z @x module 725 print_nl(" Missing `"); print(text(r_delim)); @y print_nl(" Missing `"); slow_print(text(r_delim)); @z @x module 773 begin print(a); print(n); print(e); @y begin slow_print(a); slow_print(n); slow_print(e); @z @x module 790 print(base_ident); print(" "); @y slow_print(base_ident); print(" "); @z @x module 793 print_char("("); incr(open_parens); print(name); update_terminal; @y print_char("("); incr(open_parens); slow_print(name); update_terminal; @z @x module 998 if info(lhs)>hash_end then print(int_name[info(lhs)-(hash_end)]) @y if info(lhs)>hash_end then slow_print(int_name[info(lhs)-(hash_end)]) @z @x module 999 print(int_name[info(lhs)-(hash_end)]); @y slow_print(int_name[info(lhs)-(hash_end)]); @z @x module 1032 else begin print_err("The token `"); print(text(r_delim)); @y else begin print_err("The token `"); slow_print(text(r_delim)); @z @x module 1034 else print(text(cur_sym)); @y else slow_print(text(cur_sym)); @z @x module 1041 else begin print(text(cur_sym)); print_char("="); @y else begin slow_print(text(cur_sym)); print_char("="); @z @x module 1042 else begin print_char(""""); print(cur_mod); print_char(""""); @y else begin print_char(""""); slow_print(cur_mod); print_char(""""); @z @x module 1043 print("t delimiter that matches "); print(text(m)); @y print("t delimiter that matches "); slow_print(text(m)); @z @x module 1043 again internal_quantity:print(int_name[m]); @y internal_quantity:slow_print(int_name[m]); @z @x module 1134 print_nl("Font metrics written on "); print(metric_file_name); print_char("."); @y print_nl("Font metrics written on "); slow_print(metric_file_name); print_char("."); @z @x module 1182 print_nl("Output written on "); print(output_file_name); @y print_nl("Output written on "); slow_print(output_file_name); @z @x module 1200 print(w_make_name_string(base_file)); flush_string(str_ptr-1); print_nl(base_ident) @y slow_print(w_make_name_string(base_file)); flush_string(str_ptr-1); print_nl(""); slow_print(base_ident) @z @x module 1205 print(log_name); print_char("."); @y slow_print(log_name); print_char("."); @z @x module 1213 10: print(n); @y 10: slow_print(n); @z ------ The third printing of Volume D (October 1991) incorporated the above. 559. Debugging routine never used since change 528; needed update then (JDH). @x module 617 p:=dep_list(p); r:=hi_mem_min; repeat if info(p)>=r then @y p:=dep_list(p); r:=inf_val; repeat if value(info(p))>=value(r) then @z 560. Corrections to blunders in change 550 (noted by B Jackowski, Jul 91). @x module 415 can use more paranoia even though no problems have occurred yet negate(left_y(qq)); negate(dest_y);@/ @y negate(left_y(qq)); negate(dest_y);@/ if x_coord(r)dest_x then x_coord(r):=dest_x; if left_x(r)>x_coord(r) then begin left_x(r):=x_coord(r); if right_x(pp)>x_coord(r) then right_x(pp):=x_coord(r); end; if right_x(r)dest_x then x_coord(s):=dest_x; if left_x(s)>x_coord(s) then begin left_x(s):=x_coord(s); if right_x(r)>x_coord(s) then right_x(r):=x_coord(s); end; if right_x(s)dest_x+dest_y then begin y_coord(r):=dest_x+dest_y-x_coord(p); if left_y(r)>y_coord(r) then begin left_y(r):=y_coord(r); if right_y(p)>y_coord(r) then right_y(p):=y_coord(r); end; end; @y if y_coord(r)dest_y then y_coord(r):=dest_y; if x_coord(p)+y_coord(r)>dest_x+dest_y then y_coord(r):=dest_x+dest_y-x_coord(p); if left_y(r)>y_coord(r) then begin left_y(r):=y_coord(r); if right_y(p)>y_coord(r) then right_y(p):=y_coord(r); end; if right_y(r)dest_y then right_y(r):=dest_y; if left_y(q)>dest_y then left_y(q):=dest_y else if left_y(q)left_y(q) then right_y(r):=left_y(q); @y if right_y(r)dest_x+dest_y then begin y_coord(s):=dest_x+dest_y-x_coord(r); if left_y(s)>y_coord(s) then begin left_y(s):=y_coord(s); if right_y(r)>y_coord(s) then right_y(r):=y_coord(s); end; end; @y if y_coord(s)dest_y then y_coord(s):=dest_y; if x_coord(r)+y_coord(s)>dest_x+dest_y then y_coord(s):=dest_x+dest_y-x_coord(r); if left_y(s)>y_coord(s) then begin left_y(s):=y_coord(s); if right_y(r)>y_coord(s) then right_y(r):=y_coord(s); end; if right_y(s)dest_y then right_y(s):=dest_y; if left_y(q)>dest_y then left_y(q):=dest_y else if left_y(q)left_y(q) then right_y(s):=left_y(q); @y if right_y(s)=fraction_one)or@| (max_c[dependent] div @'10000 >= max_c[proto_dependent]) then @y begin if (max_c[dependent] div @'10000 >= max_c[proto_dependent]) then @z 562. final cleanup should not retain spurious reference counts (20 Mar 95) @x module 1209 while open_parens>0 do @y while input_ptr>0 do if token_state then end_token_list@+else end_file_reading; while loop_ptr<>null do stop_iteration; while open_parens>0 do @z @x module 1209 cur_if:=name_type(cond_ptr); cond_ptr:=link(cond_ptr); @y cur_if:=name_type(cond_ptr); loop_ptr:=cond_ptr; cond_ptr:=link(cond_ptr); free_node(loop_ptr,if_node_size); @z 563. unprintable strings of length 1 need to be truly length 1 (27 Nov 95, pointed out by Ulrik Vieth) @x module 671 if loc=k+1 then cur_mod:=buffer[k] @y if (loc=k+1) and (length(buffer[k])=1) then cur_mod:=buffer[k] @z 564. minor improvement to pythagorean addition (22 Jan 97) @x module 124 if a>0 then @y if b>0 then @z 565. we need not raise hackles about two-digit years (23 Nov 98) @x module 1200 print_int(round_unscaled(internal[year]) mod 100); print_char("."); @y print_int(round_unscaled(internal[year])); print_char("."); @z 566. "this can't happen" can happen if coordinates are half vast (Julian Gilbey, January 2001) @x module 402 @!chopped:boolean; {have we truncated any of the data?} @y @!chopped:integer; {positive if data truncated, negative if data dangerously large} @z @x module 402 if internal[autorounding]>0 then xy_round; octant_subdivide; {complete the subdivision} if internal[autorounding]>unity then diag_round; @; @; while left_type(cur_spec)<>endpoint do cur_spec:=link(cur_spec); if tracing>0 then if internal[autorounding]<=0 then print_spec(", after subdivision") @y if (internal[autorounding]>0)and(chopped=0) then xy_round; octant_subdivide; {complete the subdivision} if (internal[autorounding]>unity)and(chopped=0) then diag_round; @; @; while left_type(cur_spec)<>endpoint do cur_spec:=link(cur_spec); if tracing>0 then if (internal[autorounding]<=0)or(chopped<>0) then print_spec(", after subdivision") @z @x module 404 @d procrustes(#)==if abs(#)>max_allowed then begin chopped:=true; if #>0 then #:=max_allowed@+else #:=-max_allowed; end @= p:=cur_spec; k:=1; chopped:=false; @y @d procrustes(#)==if abs(#)>=dmax then if abs(#)>max_allowed then begin chopped:=1; if #>0 then #:=max_allowed@+else #:=-max_allowed; end else if chopped=0 then chopped:=-1 @= p:=cur_spec; k:=1; chopped:=0; dmax:=half(max_allowed); @z @x module 404 if chopped then @y if chopped>0 then @z 567. I forgot to update curtype in e.g. boolean b[]; b1=true=b2; (Thorsten Dahlheimer, June 2004) @x 1003 begin nonlinear_eq(v,cur_exp,false); goto done; @y begin nonlinear_eq(v,cur_exp,false); unstash_cur_exp(cur_exp); goto done; @z 568. Wrong handling of extreme TFM values (T. Dahlheimer, June 2004) @x 1128 max_tfm_dimen:=16*internal[design_size]-internal[design_size] div @'10000000; @y max_tfm_dimen:=16*internal[design_size]-1-internal[design_size] div @'10000000; @z @x 1129 if x>0 then x:=three_bytes-1@+else x:=1-three_bytes; end else x:=make_scaled(x*16,internal[design_size]); @y if x>0 then x:=max_tfm_param@+else x:=-max_tfm_param; end; x:=make_scaled(x*16,internal[design_size]); @z 569. Bug in make_ellipse when theta=180 (T. Dahlheimer, June 2004) @x 530 else begin beta:=minor_axis; gamma:=major_axis; @y else begin beta:=minor_axis; gamma:=major_axis; theta:=0; @z 570. Forgot outer_tag in scan_declared variable (T. Dahlheimer, June 2004) @x 1011 done: if eq_type(x)<>tag_token then clear_symbol(x,false); @y done: if eq_type(x) mod outer_tag<>tag_token then clear_symbol(x,false); @z 571. Apparent bug if init_gf called at incredibly unlikely time (T. Dahlheimer, June 2004); not REALLY a bug, because str_ptr cannot equal max_strings here (because this was checked by end_name, and area_delimiter=0 there because cur_area="" in the output file name); but anyway I'll make a patch to be clean @x 1163 str_start[str_ptr+1]:=pool_ptr; gf_string(0,str_ptr); @y gf_string(0,make_string); decr(str_ptr); @z ------------- 999. The absolutely final change (to be made after my death) @x module 2 @d banner=='This is METAFONT, Version 2.7182' {printed when \MF\ starts} @y @d banner=='This is METAFONT, Version $e$' {printed when \MF\ starts} @z When this change is made, the corresponding line should be changed in Volume D, and also on page 31 of The METAFONTbook. My last will and testament for METAFONT is that no further changes be made under any circumstances. Improved systems should not be called simply `METAFONT'; that name, unqualified, should refer only to the program for which I have taken personal responsibility. -- Don Knuth